NETWORK PACK KA-DV5000 User’s Guide K C 0 00 PA V5 -D ORK A K W T NE PO SU WE PP R LY ON OF F NE TW PA OR KA CK K -D V5 00 0 LST0103-001B
When attaching Network Pack KA-DV5000 to DV Camcorder GY-DV5000, network related menus are added to the GY-DV5000 menu screen. This User’s Guide explains settings for the network related menus, operation for recording streaming data to a CF (Compact Flash) memory card and operation for sending streaming data using a LAN card. When a LAN card is connected, menu screen settings for the Network Pack and GY-DV5000 can be operated from your PC. Contents Introduction Inserting/removing CF memory card/LAN card ..
Introduction Inserting/removing CF memory card/LAN card Lock release button ● The KA-DV5000 accepts the following cards for which operation has been confirmed: (As of August 2002) Operating voltage 3.3 V Current consumption Max.
Introduction LCD screen/viewfinder screen Information from Network Pack KA-DV5000 is displayed on the GY-DV5000 LCD screen/viewfinder screen. CF FULL! qCard status displays Display wCF Memory card warning display Displays CF memory card status and system errors. Description No card is inserted in Network Pack. Flashing display during initialization (after power on). * For details concerning warning displays, see page 46. LAN card is inserted in Network Pack. e When inputting the 44.
Menu screen Menu screen structure When attaching Network Pack KA-DV5000 to DV Camcorder GY-DV5000, NETWORK PACK CONFIG menu and MOVIE CLIP menu are added to the GY-DV5000 TOP MENU screen. TOP MENU screen TOP MENU screen M ENU CAME RA O P E R A T I O N . . CAME RA P ROC E S S . . AUD I O / V I D E O . . LCD / V F . . T C / UB / C L OCK . . OT H E R S . . F I L E M AN AG E . . ME NU A L L R E S E T C AN C E L NE TWOR K P AC K C ONF I G . . EX I T MEN U AUD I O / V I D E O . . LCD / V F . .
Menu screen NETWORK PACK CONFIG menu screen items 䢇 indicates default factory setting. Item Description Setting NETWORK MAIN SETUP Displays menu screen for network related settings. (☞ page 11) ENCODE SETUP Displays menu screen for setting video and audio compressions. FRAME SIZE 䢇320 × 240 160 × 120 Sets streaming speed (bps).
Menu screen Item NETWORK PACK CONFIG menu screen items Setting MOVIE CLIP SETUP Description Displays the menu screen for CF memory card related settings such as formatting or deleting all recorded clip files. DELETE ALL 䢇CANCEL EXECUTE Selecting EXECUTE and pressing the SHUTTER dial deletes all clip files on the CF memory card. Protected clip files are not deleted. FORMAT 䢇CANCEL EXECUTE Selecting EXECUTE and pressing the SHUTTER dial starts formatting the card. All recorded clips are erased.
Menu screen Setting the NETWORK PACK CONFIG menu screen Menu screen settings can be made regardless of whether a card is inserted. Settings will be stored in the KA-DV5000 memory even when turning the power off. SHUTTER STATUS MENU OPEN SHUTTER dial STATUS button EDITSEARCH MONITOR FILTER 1 3200K 2 5600K 1/8 ND .3 5600K .
Menu screen Returning the NETWORK PACK CONFIG menu screen to factory settings SHUTTER STATUS MENU OPEN SHUTTER dial EDITSEARCH STATUS button MONITOR FILTER 1 3200K 2 5600K 1/8 ND .3 5600K .4 5600K 1/64 ND SHUTTER POWER SUPPLY STATUS LCD BRIGHT AUDIO LEVEL FULL AUTO BACK L NORMAL SPOT L N E TWOR K P A CK C ON F I G NE T WOR K MA I N S E T U P EN CODE S E T U P . . MPE G R EC TR I G MOV I E CL I P S E T U P . .
Network settings Setting the NETWORK MAIN SETUP menu screen When using a LAN card, network related settings for KA-DV5000 are made using NETWORK MAIN SETUP of the NETWORK PACK CONFIG menu. Settings will be stored in the KA-DV5000 memory even when turning the power off. SHUTTER STATUS MENU OPEN SHUTTER dial STATUS button EDITSEARCH MONITOR FILTER 1 3200K 2 5600K 1/8 ND .3 5600K .
Network settings NETWORK MAIN SETUP menu screen items NETWORK SETUP menu screen indicates default factory setting. Item Setting HOST NAME Displays the host name input setting screen. (4 ~ 64 alphanumerical characters) [Factory setting: none] OFF ON DHCP Description Select whether DHCP server is used. OFF: Use this setting when using LAN connection rather than DHCP. When this setting is used, IP ADDRESS and SUBNET MASK, GATEWAY must also be set. ON: Use this setting when using DHCP connection.
Network settings NETWORK MAIN SETUP menu screen items WIRELESS LAN SETUP menu screen indicates default factory setting. Item AD HOC MODE Primary ESS ID Setting Description OFF Wireless LAN setting AHDM OFF: Use this setting when performing communication via access point. IBSS AHDM/IBSS: Use this setting when performing communication in AD HOC mode with a PC connected with a wireless LAN card. (☞ page 16) * When this item is set to AHDM or IBSS, DHCP cannot be set to ON.
Network settings Setting user names and passwords \ Changing the user name When changing the HTTP USER NAME or FTP USER NAME, “NEXT STEP SET PASSWORD” will appear on the screen and the PASSWORD menu screen is displayed. When input is canceled in the PASSWORD menu screen, the user name will also be canceled. It is possible to change only the password. When changing the LEAP USER NAME setting, the PASSWORD menu screen will not appear automatically.
Network settings Making network related settings Network related settings are made in the individual input setting screens. Here, HTTP USER NAME is set as an example. Other settings are also made in the same manner. STOP button SHUTTER STATUS MENU OPEN SHUTTER dial EDITSEARCH STATUS button MONITOR FILTER 1 3200K 2 5600K 1/8 ND .3 5600K .
Network settings Detailed IP settings (LAN) Example of IP address and subnet mast settings when using LAN is shown below. ●Operation is only guaranteed for Windows 2000, Windows XP Home Edition or Windows XP Professional. ●Internet Explorer 5.0 or later ●Windows Media Player 7.01 or later (WM9 is not supported.) 1. For 1:1 communication between PC and GY-DV5000/KA-DV5000 OPEN EDITSEARCH MONITOR FILTER 1 3200K 2 5600K 1/ 8 ND .3 5600K .
Network settings Detailed network settings (WLAN) Example of network settings when using wireless LAN is shown below. ●Operation is only guaranteed for Windows 2000, Windows XP Home Edition or Windows XP Professional. ●Internet Explorer 5.0 or later ●Windows Media Player 7.01 or later (WM9 is not supported.) 1. For communication with PC without returning access point (Ad hoc mode) * Do not perform encryption of the wireless LAN. OPEN EDITSEARCH MONITOR FILTER 1 3200K 2 5600K 1/8 ND .3 5600K .
Network settings Detailed network settings (WLAN) 2. For communication with PC via access point (Infrastructure mode) DHCP WLAN AD HOC MODE WLAN ESS ID WLAN CH OFF OFF abcdef 2 IP ADDRESS NETMASK 192. 168. 100. 102 255. 255. 255. 000 DHCP WLAN AD HOC MODE WLAN ESS ID WLAN CH OFF OFF abcdef 2 IP ADDRESS NETMASK 192. 168. 100. 101 255. 255. 255. 000 OPEN EDITSEARCH MONITOR FILTER 1 3200K 2 5600K 1/8 ND .3 5600K .
Recording on a CF card Formatting a CF memory card If the CF memory card is unformatted when performing any of the operations shown below, “NO CF FORMAT” will appear in the LCD screen/viewfinder screen. • Executing DELETE ALL • Recording to the CF memory card Caution If the unit enters MOVIE CLIP by operating the menu or the VCR trigger button during formatting CF card, a display of the LCD viewer can go wrong.
Recording on a CF card SHUTTER Recording video on a DV cassette tape and CF memory card STATUS MENU OPEN EDITSEARCH MONITOR STATUS button FILTER 1 3200K 2 5600K 1/8 ND .3 5600K .
Recording on a CF card Recording video on a CF memory card only STATUS SHUTTER MENU OPEN EDITSEARCH MONITOR STATUS button FILTER 1 3200K 2 5600K 1/8 ND .3 5600K .
Recording on a CF card SHUTTER Recording playback signals of a DV cassette tape on a CF memory card STATUS BLANK SEARCH REW STOP FF PLAY STILL MENU OPEN EDITSEARCH STATUS button MONITOR FILTER 1 3200K 2 5600K 1/8 ND .3 5600K .
Recording on a CF card Deleting all clip files on a CF memory card MOVIE CLIP SETUP of the NETWORK PACK CONFIG menu screen is used to delete all clips on a CF memory card. SHUTTER STATUS MENU OPEN SHUTTER dial STATUS button EDITSEARCH MONITOR FILTER 1 3200K 2 5600K 1/8 ND .3 5600K .
Movie clip Playing back video/audio recorded on a CF memory card When simultaneously recording the camera video to a DV cassette and CF memory card, recording event will be registered to the clip list of the CF memory card each time recording is performed. The clip list is stored with the recorded event number (clip number) and the date/time when the recording was started. All events (clip numbers) can be played back on the MOVIE CLIP screen.
Movie clip Playing back video/audio recorded on a CF memory card CLIP FUNCTION screen MO V I E C L I P mc 0 0 0 8 . a s f R /W SHUTTER SHUTTER dial STATUS MENU BLANK SEARCH REW REV I E W D E LE T E P ROT E C T PAGE B ACK PLAY STILL OPEN EDITSEARCH MONITOR POWER SUPPLY STATUS LCD BRIGHT DISPLAY MENU AUDIO LEVEL REVIEW AUTO IRIS FULL AUTO BLACK BACK L NORMAL SPOT L FRONT REAR LOLUX STRETCH NORMAL COMPRESS CH-1 MODE VTR CAM CH-2 POWER MO V I E C L I P mc 0 0 0 8 .
Movie clip Protecting a clip file on a CF memory card Clips recorded on a CF memory card can be protected using the MOVIE CLIP screen. SHUTTER STATUS MENU OPEN SHUTTER dial STATUS button EDITSEARCH MONITOR FILTER 1 3200K 2 5600K 1/8 ND .3 5600K .
Movie clip Deleting a clip file on a CF memory card Clips recorded on a CF memory card can be deleted using the MOVIE CLIP screen. SHUTTER STATUS MENU OPEN SHUTTER dial STATUS button EDITSEARCH MONITOR FILTER 1 3200K 2 5600K 1/8 ND .3 5600K .
Movie clip Playing back CF memory card clips on your PC OPEN EDITSEARCH MONITOR FILTER 1 3200K 2 5600K 1/8 ND .3 5600K .
LAN card Sending video using LAN card while recording on a DV cassette tape SHUTTER STATUS MENU OPEN EDITSEARCH MONITOR STATUS button FILTER 1 3200K 2 5600K 1/8 ND .3 5600K .
LAN card Sending video using a LAN card (no DV cassette tape recording) SHUTTER STATUS MENU OPEN EDITSEARCH MONITOR STATUS button FILTER 1 3200K 2 5600K 1/8 ND .3 5600K .
LAN card Sending playback signals of a DV cassette tape using a LAN card SHUTTER BLANK SEARCH REW STATUS STOP FF PLAY STILL MENU OPEN SHUTTER dial EDITSEARCH STATUS button MONITOR FILTER 1 3200K 2 5600K 1/8 ND .3 5600K .
Network pack setup Controlling GY-DV5000/KA-DV5000 via LAN card With the Network Pack, GY-DV5000/KA-DV5000 can be controlled via LAN. It is also possible to playback video and audio from KA-DV5000 on your PC in the STREAMCAPTURE screen in realtime (live display) as well as save data to files. However, note that video and audio from KA-DV5000 can be played back only on one PC at a time. Peer-to-peer connection that directly connects the unit with a PC is explained here.
Network pack setup NETWORK SETUP screen Clicking NETWORK SETUP on the left of the Streamcorder screen displays the NETWORK SETUP screen for performing network related settings. Screen selection Clicking the OK icon will confirm the inputted setting. Contact your network administrator for any unclear points concerning network settings. Item Address Setup Setting MANUAL DHCP Description The address setting mode can be selected. MANUAL : Select for MANUAL mode. DHCP : Select for DHCP mode.
Network pack setup NETWORK SETUP screen FTP Server Account Setup screen Item ESS-ID Setup screen Description User Name Input the FTP user name. Old password Input the currently used password. New Password Input the new password. Confirm New For confirmation, input the new password again. Factory setting ftp-user ka-dv Primary ESS-ID Item Description Current ESS-ID Input the currently used ESS-ID. New ESS-ID Input the new ESS-ID. Confirm New For confirmation, input the new ESS-ID again.
Network pack setup PORT SETUP screen Clicking PORT SETUP on the left of the Streamcorder screen displays the PORT SETUP screen for performing port settings. Screen selection Input Clicking the OK icon will confirm the inputted setting. Item Description Factory setting HTTP (for WEB Browser) The HTTP port for WEB browser can be set. (1 to 32767) 80 HTTP (for Media Player) The HTTP port for Media player can be set.
Network pack setup CAM & VTR CONTROL screen When the correct user ID and password are accepted, the following Streamcorder screen appears. In the CAM & VTR CONTROL screen, camera adjustments of GY-DV5000 and VTR controls can be made. Screen selection Setting Clicking will display the Select the setting from the selected screen. pull-down menu. Adjustment mode selection Check the desired adjustment mode. Clicking the OK icon will confirm the inputted setting.
Network pack setup CAM & VTR CONTROL screen \ VTR Control VTR control icons Click each button to perform operation. \ To control the VTR in the Streamcorder screen, the following menu items of GY-DV5000 must be set in advance. ● Set NET REMOTE in the OTHERS [1/2] menu screen to ON.
Network pack setup ENCODE PARAMETERS screen Clicking ENCODE PARAMETERS on the left of the Streamcorder screen displays the ENCODE PARAMETERS screen for performing video/audio compression settings. Setting Select the setting from the pull-down menu. Screen selection Click the OK icon to confirm setting. Setting range 䢇indicates default factory setting. Item Setting Description Frame Size 䢇 320 × 240 160 × 120 Sets the video compression size. 320 × 240: Sets the image size to 320 × 240 pixels.
Network pack setup STREAMCAPTURE screen (Playing back video/audio using a PC and saving to file) Click the characters “STREAMCAPTURE” on the left of the Streamcorder screen to display the Streamcapture screen shown below. Video and audio sent from KA-DV5000 via LAN can be played back on your PC in the Streamcapture screen or data can be saved to files. It can be used on a PC that has Streamproducer installed.
Network pack setup STREAMCAPTURE screen (Playing back video/audio using a PC and saving to file) About the Trigger Mode function (TRIG) The Trigger Mode function can be used to save and transmit video/audio from KA-DV5000 to your PC by synchronizing to the button operations of GY-DV5000. NETWORK PACK CONFIG menu screen 1. N E TWOR K P A CK C ON F I G NE T WOR K M A I N S E T UP . . EN CODE S E T UP . . MPE G R EC TR I G MOV I E CL I P S E T UP . .
Network pack setup STREAMCAPTURE screen (Playing back video/audio using a PC and saving to file) About the Cast function (CAST) The Cast function can be used to send video/audio from KA-DV5000 to another PC. Display the video to send in the video display window of the Video sent using the Cast function can be received using Win- Streamcapture screen and click the CAST-CAM button. dows Media Player. 1.
Network pack setup STREAMCAPTURE screen (Playing back video/audio using a PC and saving to file) Property dialog box Select the video display size Select the display size from the pulldown menu. Setting range: ● Real size ● Fit to window Click the OK button to confirm settings. Advanced settings dialog box Save destination folder The default save destination is as follows: Set this field when changing the save destination folder.
Others TOP PAGE can be customized TOP PAGE can be customized as desired. TOP PAGE created on a PC is uploaded by FTP. 1. 2. Set the unit so that NETWORK SETUP can be displayed. (☞ page 31) Create HTML on the PC using a commercially available HTML editor, etc. Save the created HTML file under the name of “index.html”. 3. Use a commercially available FTP program on the PC to upload index.html created in step 2 above to KA-DV5000. FTP program settings (Execute using the set value.) IP Adress : 192.168.
Others Connecting Windows Media Player Connect the KA-DV5000 to Windows Media Player using the network. 1. 2. 3. Set STREAM TYPE in the ENCODE SETUP menu to “for WMP”. Open Windows Media Player. Select [File] → [Open URL]. The following dialog box will appear. 4. 5. Set the IP address of the camera. http://***.***.***.***:####/asf * → IP address of camera # → HTTP Port number set in “for Media player” When completed with setting, select OK to establish connection.
Others Connecting Quick Time Player Connect the KA-DV5000 to QuickTime Player using the network. 1. 2. 3. Set STREAM TYPE in the ENCODE SETUP menu to “for QT”. Open Quick Time Player. Select [File] → [Open URL with New Player]. The following dialog box will appear. 4. 5. Set the IP address of the camera. rtsp://***.***.***.***/live.mp4 * → IP address of camera When completed with setting, select OK to establish connection.
Others About updating the network pack The network pack firmware version can be updated. For details concerning version update data, visit the JVC homepage. SHUTTER STATUS BLANK SEARCH REW STOP FF PLAY STILL MENU OPEN SHUTTER STATUS dial button EDITSEARCH MONITOR FILTER 1 3200K 2 5600K 1/8 ND .3 5600K .
Others Troubleshooting When there is a system error, network error, unit malfunction, etc., KA-DV5000 displays the error on the GY-DV5000 LCD screen or viewfinder screen. Warning display Screen display Remedy Cause Reference page CF REMAIN 60SEC! (Flashing for 3 sec.) Remaining time became less than 60 seconds during recording to CF memory card. CF REMAIN 30SEC! Remaining time became less than 30 seconds during recording to CF memory card.
Others Screen display Troubleshooting Cause Remedy Reference page NO CF CARD! (Flashing for 3 sec.) There is no CF memory card inserted. Insert a CF memory card. 3 PROTECT! (Flashing for 3 sec.) Deletion of a protected clip file was attempted. To delete the clip file, remove the protection. 25 NO CLIP! (Flashing for 3 sec.) There is no CF memory card inserted, of there is no clip file available. Check the CF memory card. –– SET WLAN AD HOC MODE OFF! (Flashing for 3 sec.
Others Checking communication/connection By using the PING command standard to Windows, it is possible to check whether the connection is correct and that communication can be made from the PC to KA-DV5000. 1. Launch the command prompt. ● For Windows 2000 From the Start button, select [Programs] → [Accessories] → [Command Prompt]. 2. Input the following and press the Enter key. PING xxx.xxx.xxx.xxx (xxx.xxx.xxx.
Others Terminology ● IP address Identification number assigned to each computer that is connected to a network. The address is used for communication between network devices. ● LAN (Local Area Network) A network structured within a relatively small range such as in a single building or an office of a company. ● DHCP (Dynamic Host Control Protocol) Method of automatically assigning IP address within a network.
Others Terminology ● Encryption mode Setting for encrypting the flow of data during wireless communication. Following settings are available: None (Open System): No encryption. Setting will be unavailable and throughput will be improved. However, there is the risk of information leakage. 40blt WEP: Encryption is performed using 40-blt encryption key. 128blt: Encryption is performed using 104-blt + 24-blt (1V) keys.
Others Terminology \ About IP address Global IP address and local IP address There are 2 types of IP addresses: “global IP address” and “local IP address”. Global IP address: Just as different IP addresses are needed on a network, all PCs using the Internet worldwide must use a unique IP address. This IP address is referred to as “global IP address”. Normally, the global address is assigned by the IS provider.
KA-DV5000 NETWORK PACK VICTOR COMPANY OF JAPAN, LIMITED is a registered trademark owned by VICTOR COMPANY OF JAPAN, LTD. is a registered trademark in Japan, the U.S.A., the U.K. and many other countries.