FIXD IP DOME CAMERA FIXD MEGAPIXEL IP DOME CAMERA VN-V225U VN-X235U ● This is a supplementary instruction manual to [READ ME FIRST]. Please read through this manual together with the bundled [READ ME FIRST] (sheet). ● For image and network settings, please refer to [INSTRUCTIONS (Setting)].
Getting Started Features High picture quality The camera employs a progressive CCD with a resolution of about 330,000 pixels (1/4"), which enables video surveillance using high-quality images. (VN-V225U) The camera employs a progressive CCD with a resolution of about 1.25 megapixels (1/3"), which enables video surveillance using high-definition and high-quality images.
Analog signal output (for installation) Contents This camera is equipped with an analog video monitor signal output terminal, which is used for adjusting the camera angle during installation. Saving JPEG images to the FTP server at regular intervals JPEG images may be uploaded to the FTP server at regular intervals. Alarm input/output This camera comes with a motion detection feature and dual alarm input.
Getting Started Precautions Storage and Operating Environment 䢇 This product is an indoor camera. It cannot be used outdoors. 䢇 Do not store in the following environments. It might result in malfunctions or failure.
Others 䢇 This camera comes with a built-in AGC circuit. Setting AGC to AMidB, AHighB or ASuperB increases the sensitivity of a dark image, and the screen may appear grainy. This is not a malfunction. 䢇 When this camera is used with the white balance set to AATWB (Auto Tracking White Balance), the color tone of some objects may differ slightly from the actual color due to the principle of the automatic tracking white balance circuit. This is not a malfunction.
Getting Started Name and Function of Parts Camera G A B A B C F D E A Mounting holes (oval) ⳯ 4 G Alarm cable/Audio cable/Power cable Use these holes when mounting the camera directly to the ceiling or a wall. (A [READ ME FIRST]) B Mounting holes (round) ⳯ 4 Use these holes when mounting the camera directly to the ceiling or a wall. They are also used for mounting the camera to an electrical box.
Camera Body/Interior T The following is an illustration when the dome cover, inner dome, and outer casing are removed. Removal procedures (A page 11 ARemove the outer casingB) Lens (A page 8) Rear face of camera unit K O MAC address P H I N J M H L K H [10BASE-T/100BASE-TX(PoE)] LAN cable connector (RJ-45) I Fall prevention sheet This sheet connects the camera unit with the dome cover.
Getting Started Name and Function of Parts (continued) Lens Y Q X U R S T W T V U Q Tilt fastening screw U [RESET] button Note: ● After adjusting the field angle, tighten the tilt fastening screw to secure the camera so that its field angle does not go out of alignment. (A [READ ME FIRST]) This button has two functions as described below, depending how it is being pressed. ● Reset function (press for less than 2 seconds and release) Reboots the camera. Reboot takes about 1 minute.
V Status indicator Indicates the current status of the camera. Starting up : Lights up in orange After startup is complete : Lights up in green Error : Blinks in orange Memo: ● When the camera is in the focus adjust mode, the status indicator blinks in green and orange alternately. ● The indicator light after startup can be set to off or blink in green using the [LED State] of the integrated viewer. To alter the settings of the LED indicator, refer to [INSTRUCTIONS (Setting)].
Connection/Installation Mounting the Camera Embedding the Camera into the Ceiling T The camera can be mounted to ceilings with a thickness between 9.5 mm and 22 mm. Selecting a Mounting Method The procedures vary according to the mounting method. Mount the camera accordingly by referring to the respective section. Note: ● Be sure to put on protective glasses to protect your eyes from falling objects when mounting the camera to the ceiling.
4 Remove the inner dome 䡵 Connection The inner dome is fastened using 2 catches. Remove the inner dome by unfastening it from the catches. Memo: 5 Remove the outer casing ● For details, please also refer to the [READ ME FIRST] (sheet) provided. Note: ● For your safety, turn on the power only after all connections are completed. (This mounting method does not make use of an outer casing.
Connection/Installation Mounting the Camera (continued) 䡵 Mounting 1 Align the shooting direction with the shooting direction mark (j), followed by mounting the camera 2 Fasten the camera (x3 locations) A Turn the tip of the ceiling mounting bracket such as by using a screwdriver B The camera is fastened after the ceiling mounting brackets are hooked to the ceiling Memo: ● To remove the camera, perform the above procedure in the reverse sequence.
Connecting the Alarm Input/Output Cable Alarm output Connect to alarm devices such as alarm, indicator, light or buzzer. 䡵 Output Requirements Alarm Input Connect the cable to sensors such as infrared sensors, door sensors, metal sensors and manual switches. 䡵 Input Requirements ● Non-voltage relay NPN open collector input ● Polarity of input detection can be selected using a software ● Make/break (500 ms and above) ● Circuit current of 1 mA during low-level input ● Applied voltage of 3.
Others Troubleshooting Symptom Causes and Countermeasures Images are not output to the monitor ● Set the [MONITOR OUT] selection switch to ANB or APB, and press the Reset button. ● When using the [MONITOR] output, set the privacy mask to AOffB. (A [INSTRUCTIONS (Setting)]) Band noise is found at the lower part of the monitor image ● When using the [MONITOR] output, set the privacy mask to AOffB.
Specifications 䡵 Network output Image compression format : JPEG, MPEG4 Frame size CAMERA HEAD 640⳯480 320⳯240 Image pickup device VN-V225U VN-X235U : 1/4" square pixel progressive-scan CCD (complementary filter) : 1/3" square pixel progressive-scan CCD (complementary filter) Horizontal resolution VN-V225U : 400 TV lines (typ.) VN-X235U : 700 TV lines (typ.) Network interface : RJ-45 100BASE-TX/10BASE-T/ FULL/HALF/Auto negotiation supported Effective pixels VN-V225U : Approx.
Others Specifications (continued) Overall Alarm input ⳯2 : No-voltage a contact input, NPN open collector input, low-level input, latch/ momentary (500 ms and above) input (circuit current during low-level input: 1 mA; applied voltage during highlevel input: DC 3.3 V) Alarm output ⳯2 : NPN open collector output (allowable applied voltage: 12 V; allowable inflow current: 50 mA) Internal memory : 8 MB Supply voltage : AC 24 V or PoE (DC -48 V) Current consumption : AC 24 V 0.
Dimension [Unit: mm (inches)] T Specifications and appearance of this unit are subject to change for further improvements without prior notice.
VN-V225U/VN-X235U FIXD IP DOME CAMERA / FIXD MEGAPIXEL IP DOME CAMERA LST0926-001A © 2009 Victor Company of Japan, Limited