Firmware Update (v 3.0.12) KY-PZ510NWU/KY-PZ510NWE KY-PZ510NBU/KY-PZ510NBE KY-PZ510WU/KY-PZ510WE KY-PZ510BU/KY-PZ510BE This is a notification on the addition of new features, feature modifications and onscreen Please read this together with the “INSTRUCTIONS”. Setting value with the ● mark is the factory default. Caution Note that you cannot go back to the previous firmware version after you update to the latest version. ・ Added the 【Tracking】 to the 【View Remote Screen】.
・ 【Tracking Mode】 drop-down menu has been added to the View Remote Screen. Tracking Mode Sets the 【Tracking Mode】. [Setting : ● Standard, Area, Stage, Wide Area, Fine Adjustment] memo︓ To change 【Tracking Mode】, set 【Tracking】 to "off". To enable auto-tracking, set 【Tracking】 to "on". Tracking Mode ・ Expanded the Auto Tracking function. In addition to the "Standard", four new modes have been added. This is the normal tracking function.
Standard The camera tracks the person according to each setting. You can set how the person is framed on the screen, such as their horizontal and vertical (headroom) positions. The camera follows the person moving. 【Standard Setting】 Common Settings The settings with the same name are common to each tracking mode("Standard", "Area", "Stage", "Wide Area" and "Fine Adjustment") and affect all tracking modes. Example: The 【Figure Size】 setting in the "Standard" tab is also effective for "Fine Adjustment".
Figure Size Sets the framing of the person to be tracked. [Setting Values︓●Full、Upper、Close、Custom(●80〜141〜290) ] Full Upper Close Custom Adjust the zoom to view the entire body of the person. Displays the upper body or above the hips. Displays near the subject or above the chest. When selected, the slider allows you to adjust the display size. Figure Size="Full" Figure Size="Upper" Figure Size="Close" memo︓ Check 【Auto Zoom】.
Tracking Start Position Sets the tracking start position. If the tracking target cannot be detected, the camera returns to 【Tracking Start Position】. [Setting Values︓●Current Position, Home Position, Preset1 ] (Standard) [Setting Values︓●Current Position, Home Position, Preset1, W1, W2 ] (Wide Area) 【Starting Auto Tracking in Standard】 1. Click the 【Standard】 tab on the tracking page of the View Remote Screen. 2. Set the items in the 【Standard】 tab. 3. Set the 【Tracking Mode】 to "Standard". 4.
Area Sets up to four areas horizontally as the shooting range, tracks only when the target moves to the next area. The PTZ position also moves to the next area to follow the target. While the target person is within the same area, the PTZ position is fixed even if the person moves. The PTZ position returns to the 【Starting Area】 when the target moves out of the area and the time set by 【Target Retention Time】 is exceeded. A1 A2 A3 A4 You can configure up to four areas.
【Starting Auto Tracking in Area】 1. Click the 【Area】 tab on the tracking page of the View Remote Screen. 2. Set the PTZ position from A1 to A4. ・Set the PTZ position and press the 【Set】 button from A1 to A4. The current PTZ position is registered from A1 to A4. ・Set the area in the order of A1, A2, A3 and A4 from the left as seen from the camera. Example: Do not place A2 to the left of A1. ・As shown in this chart, set each area to overlap the space for one person with the adjacent area.
Stage Set the stage area that is between the left and right edges and the auto tracking is performed only when the target person is in the stage area. Left edge Right edge At this angle, it doesn't follow. At this angle, it doesn't follow. Follow Target 【Stage setting】 【Left Edge】, 【Right Edge】 and 【Tracking Start Position】 Register the range to track the target (【Left Edge】 and 【Right Edge】) and the angle of view for the 【Tracking Start Position】 with the 【Set】 button.
Wide Area Set two fixed areas. When the person moves to the next area, auto tracking is performed, which is the same as 【Area】 mode. When a person goes out of fixed areas, it is tracked as the 【Standard】. When the target is in the 【W1】 or 【W2】 , the same operation as in 【Area】. When the target is not in the 【W1】 or 【W2】 area, the same operation as in 【Standard】. W1 W2 Follow Target Follow Target The camera does not follow in 【W1】 or 【W2】.
Fine Adjusment When the target's position is slightly different from the preset position, the camera will track target for a few seconds in 【Fine Adjustment】 to align the PTZ position to the center of the angle of view. If 【Tracking Duration Time】 is exceeded, Normal PTZ operation is possible. Selecting the next preset will trigger 【Fine Adjustment】 again.
・ Added 【Tracking Config】 to the main menu. Added Tracking and Tracking Mode to the Tracking Settings item. Auto tracking can now be selected and operated from the main menu. Tracking Set to "on" to start Auto Tracking [Setting Values︓●off, on ] Tracking Mode Set the tracking mode to work when [Tracking] is "on". [Setting Values︓●Standard, Area, Stage, Wide Area, Fine Adj.] memo︓ To change 【Tracking Mode】, set 【Tracking】 to "off".
・ Additional target selection method during auto tracking. Additional selection methods of the target 【Bounding Box】 in multiple-person situations are as follows: 1. Left and right buttons of the View Remote Screen. 2. Double-click the person displayed in the image on the View Remote Screen. 3. Left/right operation of the control lever of the RM-LP100 Remote Camera Controller (Version 0323 or later). 4.
・ Expansion of camera settings that can be memorized and recalled for each preset position. Previously, the camera could only remember the pan, tilt, zoom, and focus positions. The camera can store and set exposure, color, image quality, and PTZ settings for each preset position.