. 4K PTZ REMOTE CAMERA KY-PZ400NWU/KY-PZ400NWE KY-PZ400NBU/KY-PZ400NBE INSTRUCTIONS . Specifications and appearance of this unit are subject to change for further improvement without prior notice. Details For details on settings and operation, refer to “INSTRUCTIONS” on the website. Please check the latest INSTRUCTIONS, tools, etc. from the URL below. North America: http://pro.jvc.com/prof/main.jsp Europe: https://eu.jvc.com/#pro North America Europe Thank you for purchasing this product.
FOR USA These are general Important Safety Instructions and certain items may not apply to all appliances. Important Safety Instructions 8. 9. 10. 11. 12. 13. Getting Started 1. 2. 3. 4. 5. 6. 7. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
POUR LES ÉTATS-UNIS Ces informations sont des CONSIGNES DE SÉCURITÉ IMPORTANTES et certains points peuvent ne pas s’appliquer à tous les appareils. CONSIGNES DE SÉCURITÉ IMPORTANTES Getting Started 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Lire ces instructions. Conserver ces instructions. Tenir compte de tous les avertissements. Respecter toutes les instructions. Ne pas utiliser cet appareil à proximité de l’eau. Ne nettoyer qu’avec un chiffon sec. Ne pas boucher les ouvertures de ventilation.
Safety Precautions POUR CANADA FOR USA AND CANADA ATTENTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION: POUR EVITER TOUT RISQUE D’ELECTROCUTION NE PAS OUVRIR LE BOITER. AUCUNE PIECE INTERIEURE N’EST A REGLER PAR L’UTILISATEUR. SE REFERER A UN AGENT QUALIFIE EN CAS DE PROBLEME. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Getting Started Supplier's Declaration of Conformity Model Number: KY-PZ400NWU KY-PZ400NBU JVC Trade Name: JVCKENWOOD USA Responsible Corporation party: 1440 Corporate Drive, Address: Irving, TX 75038 678-449-8879 Telephone Number: Déclaration de conformité du fournisseur KY-PZ400NWU Numéro de KY-PZ400NBU modèle : Nom de marque : JVC JVCKENWOOD USA Personne Corporation responsable : 1440 Corporate Drive, Adresse : Irving, TX 75038 678-449-8879 Numéro de téléphone : This device complies with Part 15 of th
CAUTION: Attention: The mains plug shall remain readily operable. Remove the mains plug immediately if the camera functions abnormally. La prise secteur doit être opérationnelle. Débranchez immédiatement la fiche secteur si le caméscope ne fonctionne pas normalement. Getting Started . . WARNING: Avertissement: The battery pack, the camera with battery installed, and the remote control with battery installed should not be exposed to excessive heat such as direct sunlight, fire or the like.
Si le matériel est installé dans un coffret ou sur une étagère, s’assurer qu’il y a un espace suffisant sur tous les côtés pour permettre la ventilation (10 cm (3-15/16") ou plus sur les deux côtés, au dessus et à l’arrière). Ne pas boucher les orifices de ventilation. (Si les orifices de ventilation sont bouchés par un journal, un tissu, etc., la chaleur peut ne pas s’éliminer.) Aucune source à flamme nue, telle que des bougies allumées, ne doit être placée sur l’appareil.
Lorsque vous utilisez l'adaptateur secteur ailleurs qu’aux États-Unis When using the AC adapter in areas other than the USA L'adaptateur secteur fourni dispose d'une sélection de tension automatique dans la plage CA de 110 V à 240 V. USING HOUSEHOLD AC PLUG ADAPTER UTILISATION D'UN ADAPTATEUR SECTEUR DE PRISE DOMESTIQUE In case of connecting the unit’s power cord to an AC wall outlet other than American National Standard C73 series type, use an AC plug adapter called a “Siemens Plug” as shown.
IMPORTANT (for owners in the U.K.) Connection to the mains supply in the United Kingdom. DO NOT cut off the mains plug from this equipment. Getting Started If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or contact the local dealers in your area. BE SURE to replace the fuse only with an identical approved type, as originally fitted, and to replace the fuse cover.
o Para Brasil . Para Retirar a Bateria Recarregável Pressione botão e puxe a bateria para fora. Mounting to a firm place As the unit contain parts rotating at high speed, mount it on a firm place with sufficient strength to support the vibration and weight of the unit. Mass : Approx. 1.7 kg If the strength is weak, the vibration will cause fuzzy images on the monitor screen. In the worst scenario, the camera may even fall off and hit somebody, resulting in serious accidents.
Contents Menu Display and Detailed Settings Getting Started Getting Started Safety Precautions ............................................ 5 Contents .......................................................... 12 Main Features ................................................. 14 Precautions ..................................................... 15 Names of Parts ................................................ 18 Basic System Diagram ....................................
Content of this Manual Symbols used Getting Started Caution : Describes precautions concerning the operation of this product. Memo : Describes reference information, such as functions and usage restrictions of this product. Content of this manual 0 All rights reserved by JVCKENWOOD 0 0 0 0 0 0 0 0 Corporation. Unauthorized duplication or reprinting of this manual, in whole or in part, is strictly prohibited.
Main Features 4K Ultra HD Getting Started Equipped with a new-generation premium-quality 1/2.5" UHD CMOS sensor with a maximum number of 8.51 megapixels, the camera supports 4K (3840 x 2160) ultra-high resolution images. It also offers downward compatibility with other resolutions including 1080p and 720p.
Precautions Installation Location o Be sure to install the camera horizontally. Carrying the Camera o Do not drop or hit this unit against a hard object when transporting. o Remove the connecting cables when transporting the unit. o When transporting the unit, turn off the power of the system. o Pack the unit with cushioning material so as to avoid shock when transporting. o Handle the unit with care and do not subject it to vibration or shock.
License Notices Getting Started o MPEG LA AVC THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL USE OF A CONSUMER OR OTHER USES IN WHICH IT DOES NOT RECEIVE REMUNERATION TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE.
Getting Started o An afterimage can appear if you view a moving object on the monitor output, however this is not a malfunction. o Do not put anything into the camera unit. Metal and flammable items entering from the connectors can result in fire or electric shock. o The camera recorder may not show stable pictures for a few seconds immediately after the power is turned on, but this is not a malfunction. o Do not drop this unit or subject it to strong impact or vibration as it is a precision equipment.
Names of Parts LINE OUT terminal LINE IN terminal DC 12V terminal LAN terminal USB 2.0 terminal 3G-SDI terminal HDMI terminal RESTORE switch (Reset switch) Resets the IP address, web password, camera menu, settings on the View Remote screen and preset values. Memo : 0 [Image] and [Style] settings will not be reset. A B C D E F G H Getting Started A B C . A Tally lamp Light turns on or goes off during external control.
Corresponding Pins between Camera and Windows DB-9 Windows DB-9 1.DTR 2.DSR 3.TXD 4.GND 5.RXD 6.GND 7.IR OUT 8.NC 1.CD 2.RXD 3.TXD 4.DTR 5.GND 6.DSR 7.RTS 8.CTS 9.RI . Corresponding Pins between Camera and Mini DIN . Camera Mini DIN 1.DTR 2.DSR 3.TXD 4.GND 5.RXD 6.GND 7.IR OUT 8.NC 1.DTR 2.DSR 3.TXD 4.GND 5.RXD 6.GND 7.NC 8.
Infrared Remote Control A Getting Started B C 2 3 4 REV 1 2 3 4 5 6 7 8 9 0 F1 D Q CAMERA SELECT 1 STD F2 F3 PRESET E P F4 HOME F MENU SLOW ZOOM O N M L RESET FAST G I H L/R SET BACKLIGHT P/T RST AUTO FAR NEAR FOCUS MANUAL K J . A STANDBY button Switches between the standby and normal modes. Memo : 0 Power consumption in the standby mode is approximately half of that in the normal mode. B NUMBER button For preset configuration or invoking a preset number.
P # button To be used together with other buttons. Q CAMERA SELECT button Press the number of the camera you want to control using the infrared remote control. Memo : 0 The remote control unit makes use of 2 AAA dry-cell batteries. 0 Make sure to load the battery in the correct +/orientation. Image freeze feature Pressing the [F4] button freezes the video image and displays a “freeze” caption at the top left corner of the screen for about 5 seconds.
Basic System Diagram 3.5 mm audio cable (Sold separately) Getting Started 3.5 mm audio cable (Sold separately) RS485 Cable (Sold Separately) RS232C Cable (Supplied) RS232 Cable (Sold Separately) 3G-SDI cable (Sold separately) HDMI cable (Sold separately) USB cable (Sold separately) LAN cable (Sold separately) Computer, TV, VCR with Audio Input Jack, AC adapter (Supplied) Router or Hub, Speaker Power cord (Supplied) Microphone, etc. DC 12V IN .
Mounting the Camera to the Ceiling Mount Bracket Memo : 0 Check that the screws are tighten securely when mounting is completed. 0 Be sure to put on protective glasses to protect Memo : 0 The ceiling mount bracket is not necessary when the camera is installed on a desktop or attached to a tripod. 0 If necessary, make a hole (Φ40 mm) to route the connection cable and fall prevention wire (ceiling) into the ceiling. Caution : 0 The fall prevention wire (for ceiling) is not supplied.
Installing the Camera on the Ceiling 4 Use three M3 screws that come with the camera to attach Configure the video format settings using the SYSTEM SELECT switch before installing. 1 Remove the 4 feet from the bottom surface of the camera Installation/Connection . Fasten the drop prevention wire (sold separately) together with one of the screws. .
Installing the Camera on a Desktop Connect the cables after these procedures. Attaching the Camera to a Tripod Configure the video format settings using the SYSTEM SELECT switch before installing. 0 Attach a tripod using the screw hole at the bottom of this product. (1/4-20UNC, ISO1222 (6.35 ㎜)) 0 To prevent the camera recorder from falling off, which may result in injuries or damages, read the “INSTRUCTIONS” of the tripod to be used and make sure that it is securely attached.
Network Features Operating Environment Installation/Connection Operation has been verified for the following environments. 0 Computer 0 OS: Windows 10 Web browser: Google Chrome 0 OS: macOS 10.12. 6 Web browser: Google Chrome IP address settings There are two ways to configure the IP address of the camera. A Log in to the web page, and select [Network] B [Lan Settings] to make changes to the IP address, subnet mask and gateway. Click “Submit” to restart the camera. B Use “upgrade_standard.
3 After changing the value of “IP Address”, “NetMask”, and “GateWay” is complete, click the [Set] button Confirming the Connection . 0 When the setting is successful, the following display appears and the camera recorder restarts. 2 Enter the user name and password Enter the user name (jvc) and the password (initial password: 0000) on the login screen to display the Live View screen. Memo : 0 The screen for changing the password is displayed when you log in for the first time.
View Remote Screen A B Using View Remote C D F H I L N O P E G J K M Q R S . A Live Displays the camera’s video image. Memo : 0 Audio is not output. 0 Supports full-screen display. 0 To display the menu on the live screen, configure [Encode Codec] of [First stream] or [Second stream] to “H.264”. If the menu display is too small, increase the [Resolution] for [First stream] or [Second stream] accordingly. B Settings menu selection switch Displays the different settings menus.
Video This is the setting screen for the HDMI/SDI terminal and streaming video. After configuring the different items, press the [Submit] button. The settings will be applied when the camera is next restarted. Video Settings 9 Video Format For selecting the video output frame rate. [Setting Values: 50Hz, 60Hz, RDial Priority] 9 Encode Level For selecting a streaming video encoding level.
Using View Remote Image Audio For adjusting the video quality. After configuring the different items, press the [Submit] button. Memo : 0 If the camera is restarted without pressing the [Submit] button, the settings will be restored to those before the change. Pressing the [Default] buttons restores the settings to the factory default. 0 To display the menu on the camera’s video image, configure [Encode Codec] of [First stream] or [Second stream] to “H.264”.
System Network For restarting the system and management of users. For configuring network-related settings. After configuring the different items, press the [Submit] button. For Lan Settings, press the [Submit] button below Lan Settings. For other settings, press the [Submit] button right at the bottom. The settings will be applied when the camera is next restarted. Initialize 9 Reboot Restarts the camera. Use this function to apply new video or audio settings.
Port Settings SRT Settings Using View Remote 9 HTTP Port For configuring the HTTP port. [Setting Values: R80 or 1025 to 65535] 9 SRT Configuring it to “on” and pressing the Save button starts SRT streaming after the camera is restarted. 9 RTSP Port For configuring the RTSP port. [Setting Values: R554 or 1025 to 65535] 9 SRT Mode For configuring the SRT connection mode. [Setting Values: RListener, Caller] 9 TCP Port For configuring the TCP port.
RTSP Settings 9 RTSP Auth Configuring to “on”, the user name and password are required to receive streaming. [Setting Values: on, off] Multicast Settings 9 Address For entering the IP address for multicast. The default value is “224.1.2.3”. 9 Port For configuring the port number used for multicasting to a value between 1025 and 65535. The default value is “6688”. ZeroConfig For allowing this camera recorder to be detected automatically by external devices (such as switchers) connected to the same LAN.
NDI Config This is the setting screen for the NDI (Network Device Interface) protocol. NDI Settings 9 NDI Local Device Name For configuring the device name to be displayed in the NDI application. The default value is “PZ400”. Using View Remote 9 NDI Receive Group For configuring the group name to be used for the NDI application. The default value is “public”. 9 NDI Firmware Version Displays the NDI firmware version.
Basic Shooting Procedures Preparations 1 Supply power to the camera via a LAN cable or AC adapter (A P25 [Connecting the Cables] ) 2 Configure the IP address of the camera For viewing the IP address of the camera and configuring the IP address.
Performing Live Streaming By combining with the decoder or PC application that supports live streaming, you can perform audio and video streaming via the network. Supported Codecs H.264, H.265, Motion JPEG Memo : 0 When the supported codec is configured to “H. 265” and the resolution to “3820x2160”, live streaming is possible only for RTSP/RTP.
Supported Streaming Formats Streaming formats that are supported using the SYSTEM SELECT switch setting are as follows. Configure the SYSTEM SELECT switch according to the format to be used for streaming. o When [Video]B[Video Settings]B[Video Format] in the web menu is configured to “Dial Priority” C *2 *3 *4 0, 2, 5, B 60p 7, 8, 9 59.94p *4 1, 3, F 50p 4 30p 6 29.
o When [Video]B[Video Settings]B[Video Format] in the web menu is configured to “60Hz” 320x240 480x320 640x360 *2 640x480 60p 720x408 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, B, E, F 720x480 30p 1024x576 A, C, D Stream 1280x720 Frame Rate (Max.) 1920x1080 SYSTEM SELECT Switch 3840x2160 Resolution First *1 Second First Second .
Menu Screen Hierarchical Chart Menu ..................................................... (A P 40) Memo : 0 Some menu items may not be configurable depending on the operating mode and status of the camera. 0 Setting value with the R mark is the factory default. Menu Screen Hierarchical Chart 39 Menu Display and Detailed Settings - EXPOSURE ...................................... (A P 40) - Mode ............................................ (A P 40) - ExpCompMode ............................
GUI Settings Menu Pressing the [MENU] button on the infrared remote control unit displays the main menu on the HDMI/SDI and streaming screens. You can move the cursor using the arrow buttons. Use the [HOME] button to enter the corresponding menu. Exposure Mode For selecting the method for controlling the exposure. 0 Auto Gain/Shutter/Iris are adjusted automatically. 0 Manual Gain/Shutter/Iris operate according to the menu setting.
Iris For configuring the iris value (F number). [Setting Values: RF1.8, F2.0, F2.4, F2.8, F3.4, F4.0, F4.8, F5.6, F6.8, F8.0, F9.6, F11.0, Close] Memo : 0 This item can be configured when [Mode] is configured to “Manual” or “AAE”. Shutter For configuring the shutter speed. [Setting Values: 1/30, 1/60, 1/90, 1/100, R1/125, 1/180, 1/250, 1/350, 1/500, 1/725, 1/1000, 1/1500, 1/2000, 1/3000, 1/4000, 1/6000, 1/10000] Memo : 0 This item can be configured when [Mode] is configured to “Manual” or “SAE”.
Color WB Mode For setting the white balance mode. 0 Auto Automatically adjusts the white balance according to the color temperature of the lighting for illuminating the subject. 0 Indoor For configuring to a color temperature that is suitable for indoor shooting. 0 Outdoor For configuring to a color temperature that is suitable for outdoor shooting. 0 OnePush Pressing the [HOME] button adjusts the white balance according to the current color temperature of the lighting illuminating the subject.
Image Luminance For adjusting the brightness. [Setting Values: 0 to 14 (R7)] * When [Style] is set to a value other than “Bright” [Setting Values: 0 to 14 (R8)] * When [Style] is set to “Bright” Contrast For adjusting the contrast.
Noise Reduction NR3D-Level For configuring 3D noise reduction. [Setting Values: Auto, Off, 1 to 11 (R6)] Setup Language Switches between languages in the menu screen. [Setting Values: REnglish, Français, Deutsch, Italiano, Español, русский, 中文, 日本語] DVI Mode Menu Display and Detailed Settings For configuring the audio output from the HDMI terminal. HDMI : Outputs the audio. DVI : Mutes the audio.
Restore Default Restore? Resets all the menu item settings except for the language setting. [Setting Values: No, Yes] Memo : 0 Press the [HOME] button to confirm the selection. Settings for the IP address, web password and View Remote screen will not be reset. P/T Limit Reset Resets only the menu settings. [Setting Values: No, Yes] Memo : 0 Press the [HOME] button to confirm the selection.
Troubleshooting Problem Video image does not appear on the monitor Sometimes the video image is not displayed Video image becomes blurry when zoomed to the Tele end Video image does not appear on the Web browser Unable to access camera from the Web browser Action 0 Check to ensure that the power supply of the camera is properly connected, the power voltage is normal and the POWER lamp is on at all times. 0 Restart the camera and check whether the camera has been initialized.
Specifications Item [3G-SDI] terminal General Item Power Description DC 12 V (when an AC adapter is used) PoE 0.62 A (*1) 0.18 A (*2) Approx. 1.7 kg 0 °C to 40 °C (32 °F to 104 °F) Current consumption Mass Allowable operating temperature 30 %RH to 80 %RH (No Allowable condensation) operating humidity -20 °C to 50 °C (-4 °F to 122 °F) Allowable storage temperature Dimensions (W 141.5 mm x 164.5 mm x 168.4 × H × D) mm MTBF > 30000 h *1 Operated in the factory default settings when an AC adapter is in use.
Video Item Signal system Infrared Remote Control Description 3840x2160/30p, 25p, 29.97p 1920x1080/60p, 50p, 30p, 25p, 59.94p, 29.97p, 60i, 50i, 59.94i 1280x720/60p, 50p, 59.94p Network Item Video compression Video stream Description H.264, H.
Dimensional Outline Drawing (Unit: mm) 164.5 Φ70.7 141.5 168.4 . * The specifications and appearance of this product are subject to changes for further improvement without prior notice.
Software License Agreement The software embedded in the Product (hereinafter the “Licensed Software”) provided by JVCKENWOOD Corporation (hereinafter the “Licensor”) is copyrighted to or sublicensable by the Licensor, and this Agreement provides for the terms and conditions which Users shall follow in order to use the Licensed Software. The User shall use the Licensed Software by agreeing with the terms of this Software License Agreement.
Article 8 Termination In case the User falls under any of the events described in the following items, the Licensor may immediately terminate this Agreement or claim that the User compensates for the damage incurred by the Licensor due to such event: (1) when the User violated any provision of this Agreement; or (2) when a petition has been filed against the User for an attachment, provisional attachment, provisional disposition or any other compulsory execution.
B5A-3989-00 © 2021 JVCKENWOOD Corporation KY-PZ400NWU/KY-PZ400NWE/KY-PZ400NBU/KY-PZ400NBE 4K PTZ REMOTE CAMERA .