ENGLISH ESPAÑOL FRANÇAIS KW-V50BT/KW-V30BT MONITOR WITH DVD RECEIVER Please read all instructions carefully before operation to obtain the best possible performance from the unit. MONITOR CON RECEPTOR DE DVD Por favor lea detenidamente este manual para comprender a fondo todas las instrucciones y obtener un máximo disfrute de esta unidad.
CONTENTS BEFORE USE...................................................2 How to reset your unit.................................................... 3 How to forcibly eject a disc........................................... 3 INITIAL SETTINGS .........................................4 BASICS ...........................................................5 Component names and functions ............................. 5 Common operations .......................................................
BEFORE USE For KW-V50BT Region 1/KW-V30BT Region 1: V CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. In compliance with Federal Regulations, the following are reproductions of labels on, or inside the product relating to laser product safety. JVC KENWOOD Corporation 2967-3, ISHIKAWA-MACHI, HACHIOJI-SHI, TOKYO, JAPAN THIS PRODUCT COMPLIES WITH DHHS RULES 21CFR SUBCHAPTER J IN EFFECT AT DATE OF MANUFACTURE.
INITIALS ETTINGS Initials etup 2 Finish the procedure. 3 Display the screen. When you power on the unit for the first time or reset the unit, the initial setting screen appears. • You can also change the settings on the screen. (Page 49) 1 The Home screen is displayed. • [AV Off] is selected initially. Select the playback source. (Page 8) Calendar/Clock settings 1 Display the Home screen. KW-V50BT Select the text language used for on-screen information.
BASICS Component names and functions KW-V50BT 8 DISP/DISP OFF button • Switches the screen between the current source and the App screen from the connected iPod touch/iPhone/Android. (Press) • Turns off the screen. (Hold) (Page 6) • Turns on the screen. (Hold) (Page 6) 9 M (Eject) button • Displays the screen. (Press) (Page 6) • Ejects the disc forcibly. (Hold) (Page 3) p Reset button Resets the unit.
BASICS To attenuate the sound KW-V50BT KW-V30BT Common operations To turn off the AV source: R Turning on the power KW-V50BT KW-V30BT The ATT indicator lights up. To cancel the attenuation: Press the same button again.
BASICS Common screen operations screen R Common screen descriptions 5 You can display other screens any time to change the source, show the information, or change the settings, etc. 6 Source control screen Performs source playback operations. • The operation buttons vary depending on the selected source. • Touching the text information changes the information type.
BASICS R Touch screen operations 2 Selecting the playback/video source 3 On the Home screen: 1 1 Displays the source control screen while playing a video. • For [USB]/[iPod]/[Pandora]/[iHeartRadio]: When playing a source with the jacket picture/Artwork/ picture data shown, the jacket picture/Artwork/ picture data is displayed on the button instead of the source icon on the Home screen. • You can change the items to display on the Home screen.
DISCS R Ejecting a disc Playing a disc • If a disc does not have a disc menu, all tracks on it will be played repeatedly until you change the source or eject the disc. • For playable disc types/file types, see page 60. KW-V50BT For DVD/DVD-VR/VCD/DivX/MPEG1/MPEG2 1 23 45 6 7 8 R Inserting a disc Insert a disc with the label side facing up. • For KW-V50BT: To open the monitor panel, see page 6.
DISCS Operation buttons [Mode] Changes the settings for disc playback on the screen. (Page 13) 1 Displays the folder/track list. [ ]* (Page 11) • Selects a chapter/track. (Press) [S] [T] • Reverse/forward search.*2 (Hold) Starts/pauses playback. [I/W] Stops playback. [o] Selects repeat playback mode. [ ]*3 (Page 12) 1 3 Selects random playback mode. [ ]* * (Page 12) 3 4 Displays an Original Program/ [ ]* * Playlist screen. Plays in frame-by-frame. [ ] [ ]*3 *5 1 3 Selects a folder.
DISCS R Selecting a folder/track on the list R Video menu operations 1 You can display the video menu screen during video playback. • Available items on the screen differ depending on the types of the loaded disc and playback files. • The operation buttons disappear when the screen is touched or when no operation is done for about 10 seconds. 2 Select the folder (1), then the item in the 1 Display the
DISCS • Touching any position other than operation buttons displays the source control screen. • To close the
DISCS Settings for disc playback * * • The items available on the screen are different depending on the discs/files played back. You can change the dynamic range while playing Dolby Digital software. • Off: Select this to enjoy a powerful sound at a low volume level with its full dynamic range. • On (initial): Select this to reduce the dynamic range a little. • Dialog: Select this to reproduce movie dialog more clearly.
USB Connecting a USB device You can connect a USB mass storage class device such as a USB memory, Digital Audio Player etc. to the unit. • For details about connecting USB devices, see page 56. • You cannot connect a computer or portable HDD to the USB input terminal. • For playable file types and notes on using USB devices, see page 61. When a USB device is connected... The source changes to “USB” and playback starts. • All tracks in the USB device will be played repeatedly until you change the source.
USB R Setting Set the interval between slides during slide-shows of R Selecting a track in a list 3 Select the track. t You can change the page to display more items by pressing [J]/[K]. t To list the items in alphabetical order, press [ABC ] t Press [ ] to open the folder containing the current track. t Press [ ] to return to the root folder. t Press [ ] to return to the upper layer. t If you want to play all tracks in the folder, press [I] on the right of the desired folder.
iPod/iPhone • To use iPod touch/iPhone Apps, see page 19. • To listen to Pandora, see page 20. Preparation R Connectingi Pod/iPhone • For details about connecting iPod/iPhone, see page 56. • For playable iPod/iPhone types, see page 62. Connect your iPod/iPhone according to your purpose or the type of the iPod/iPhone. Wired connection • To listen to music: Use USB 2.0 cable (accessory of the iPod/iPhone) or KS-U62 (optional accessory).
iPod/iPhone 3 Select the connection method (1), then press [Next] (2). Select this when the iPod/ iPhone is connected using KSU59 (optional accessory). Select this when the iPod/ iPhone is connected using USB 2.0 cable (accessory of the iPod/ iPhone) or KS-U62 (optional accessory). iPhone is connected using HDMI cable KS-U60 (optional accessory) and USB 2.
iPod/iPhone Playback operations When the operation buttons are not displayed on the screen, touch the area shown on the illustration. t To change settings for video playback, see page 45. R Indications and buttons on the source control screen For audio playback 1 2 3 4 56 7 Playback information 1 Song/video information t Touching the text information changes the information type. 2 Track no./Total track number 3 Playback mode (See below.
iPod/iPhone Video menu: Apps You can use an App of the connected iPod touch/ iPhone/Android on this unit. t When you use an iPod touch or iPhone App, see also page 63 for safety instructions. t For Apps you can use on this unit, visit . R Operation buttons on the source control screen Preparation 1 Connect the iPod touch/iPhone/Android. t You can change the page to display more items by pressing [J]/[K].
Pandora® (Only for KW-V50BT Region 1/KW-V30BT Region 1) You can stream Pandora from iPod touch/iPhone or Android devices. • Install the latest version of the Pandora application on your iPod touch/iPhone/Android. Preparation Connect the device, then start the Pandora application. For Android 1 Pair the Android device through Bluetooth. (Page 35) 2 Select the device to use and connection method on the screen. (Page 43) 3 Select “Pandora” as the source.
Pandora® R Adding a station from the to the R Selecting a station from the The screen shows the genres sent by the connected device. Select a genre and station to add to the Station List. 1 Display the list selecting screen. 2 • You can change the page to display more items by pressing [J]/[K]. • The indicator appears on the left of the item when Shuffle is activated. (All songs on the registered stations are played randomly.
iHeartRADIO (Only for KW-V50BT Region 1/KW-V30BT Region 1) iHeartRADIO is a free, all-in-one digital radio service that lets you listen to your favorite Live Stations or create commercial-free, all-music Custom Stations featuring songs from the artists you select and similar music. You can stream iHeartRADIO from iPod touch/ iPhone or Android devices. • Install the latest version of the iHeartRADIO application on your iPod touch/iPhone/Android.
iHeartRADIO R Selecting variety level for your custom station 2 Select a station. You can adjust the amount of lesser-known music that gets pushed into your custom station. 1 Display the variety type selecting screen. On the custom station screen: • Press [ • Press [ ] to return to the top layer. ] to return to the upper layer. R Editing the list 1 Select on the screen. (See the left column.) 2 Display the screen. 2 Select the variety type.
TUNER Listening to the radio Preparation: Select the appropriate tuner channel interval for . (Page 25) R Indications and buttons on the source control screen 12 3 4 5 6 7 8 9 Operationb uttons [P1] – [P6] • Selects a stored station. (Press) • Stores the current station. (Hold) [Mode] Changes the settings for tuner reception on the screen. (Pages 24–25) Enters PTY search mode. (Page 26) [PTY ]*1 [SSM] Presets the stations with the strongest signals automatically.
TUNER R Tuning in FM stations only with strong signals—LO/DX (Local/Distanceextreme) R Reducing interference during FM reception 1 1 1 2 2 2 [Auto] [Local] [DX] Select this to tune in only to stations with sufficient signal strength. The LO indicator lights up. Deactivate the function. The DX indicator lights up. R Changing the tuner channel interval The tuner channel interval changes depending on the area you use this unit.
TUNER Presetting stations FM RBDS features R Storing stations in the memory R Searching for FM RBDS programs—PTY Search You can preset 6 stations for each band. Automaticp resetting—SSM(St rong-station Sequential Memory) R Activating/deactivating TA Standby Reception 1 Display the screen. KW-V50BT You can search for your favorite programs being broadcast by selecting the PTY code for your favorite programs.
SiriusXM®R ADIO (Only for KW-V50BT Region 1/KW-V30BT Region 1) Everything worth listening to is on SiriusXM, getting over 130 channels, including the most commercialfree music, plus the best sports, news, talk and entertainment. To start listening to the SiriusXM® Satellite Radio, a SiriusXM Connect Vehicle Tuner (commercially available) and subscription are required. For more information, visit www.siriusxm. com.
SiriusXM® RADIO Selecting a channel 1 Display the screen. Presetting channels SiriusXM Replay™ R Storing channels in the memory You can preset 6 channels for each band. 1 Tune in to a channel you want to preset. 2 Select a category (1), and then select a (Page 27) 2 Select a preset number. You can pause, rewind and replay content from the currently tuned channel. • The SiriusXM Connect Vehicle Tuner continually buffers up to 60 minutes of audio.
SiriusXM® RADIO To return to the channel reception screen: Press [Preset]. • When you are listening to Replay and switch to the channel reception screen, Replay still continues and [Replay] is highlighted. R Replaying a content • To start/pause the playback, press [IW]. • To skip the current track segment, press [S]/ [T]. – Pressing [S] within 2 seconds of the beginning of the current track/segment returns to the previous track.
SiriusXM® RADIO Setting the reception restrictions 2 Enter the current code in , a new code in , and then the new code again to confirm the entry in . R Setting the parental lock You can set the parental lock in order to, for example, restrict children from receiving adult channels. 1 Enter a code. 2 Confirm the entry. Setting the parental code • The initial setting is “0000.
SiriusXM® RADIO 3 Select a category (1), and then a channel you want to activate the parental lock for (2). 2 Enter your parental code number (1), then confirm the entry (2). • Press [Clear] to delete the entry. • The indicator appears beside the channel with the parental lock activated. • To cancel the selection, select the locked channel again in Step 3. The indicator disappears and the selection is canceled.
OTHER EXTERNAL COMPONENTS Using external audio/video players—AV-IN R Starting playback 1 Connect an external component to the AV-IN1 terminal. • When the operation buttons are not displayed on the screen, touch the area shown on the illustration. – To change settings for video playback, see page 45. • To connect an external component, see page 57. Using external audio players— Front AUX (only for KW-V30BT) R Indications and buttons on the source control screen 2 Select “AV-IN” as the source.
OTHER EXTERNAL COMPONENTS Using a rear view camera • To connect a rear view camera, see page 57 . • To use a rear view camera, a REVERSE GEAR SIGNAL lead connection is required. (Page 55) R Displaying the picture from the rear view camera The rear view screen is displayed when you shift the gear to the reverse (R) position. Adjusting the picture from the rear view camera When displaying the picture from the rear view camera manually, you can change the setting of the picture.
OTHER EXTERNAL COMPONENTS Using a smartphone—HDMI/MHL R What is HDMI/MHL? HDMI stands for High Definition Multi-media Interface. An HDMI connection can transfer a digital video source signal (such as from a DVD player) without conversion to analog. A new feature that has been added to HDMI that extends its capabilities further is MHL, or Mobile High-definition Link. Both interfaces allow your smartphone to connect to the device. When it is connected, you can see your smartphone’s screen on the monitor.
BLUETOOTH Information for using Bluetooth® devices Bluetooth is a short-range wireless radio communication technology for mobile devices such as mobile phones, portable PCs, and other devices. Bluetooth devices can be connected without cables and communicate with each other. Notes • While driving, do not perform complicated operations such as dialing numbers, using the phone book, etc. When you perform these operations, stop your car in a safe place.
BLUETOOTH Pairing a Bluetooth device from the target device using a PIN code (for Bluetooth 2.0) 1 Display the screen. On the Home screen: 2 Change the PIN code. t If you skip changing the PIN code, go to step 3. t The PIN code is initially set to “0000”. t The maximum number of digits in the PIN code is 15. 4 Select the unit (“KW-V****”) for your Bluetooth device. t If the PIN code is required, enter “0000” (initial).
BLUETOOTH Pairing a Bluetooth device from this unit using a PIN code (for Bluetooth 2.0) 3 Select the device you want to connect (1), then press [Connection] (2). 1 Display the screen. R Deleting a registered Bluetooth device 1 Display the screen. (Page 36) (Page 36) 2 2 3 Select a device to delete (1), then press 3 Search for the available devices. [Remove] (2). 4 Select [On] or [Off] for the target. • To cancel searching devices, press [Cancel].
BLUETOOTH Using the Bluetooth mobile phone R Receiving a call R Adjusting the volume of calls/earpiece/ microphone R Reducing noise/adjusting the echo cancel level While talking... While talking... • You can adjust the volume level between 0 to 15 (initial: 3). • This adjustment does not affect the volume level of the other sources. • Use the monitor panel to adjust the call/earpiece volume. (Page 6) • To adjust the echo volume (between −1 to +1, initial: 0): Adjust .
BLUETOOTH R Sending text during a call R Making a call From the preset list/phone book/call lists You can send text during a call using the DTMF (Dual Tone Multi Frequency) function. 1 Display the phone control screen. 1 On the Home screen: While talking... • You can also display the phone control screen by pressing [ ] on the screen. (Page 7) 2 Select a method to make a call.
BLUETOOTH • To use the A to Z search on phone book: When the phone book list is displayed, you can search by initial. 2 Select a phone number to call. 1 Voicedi aling • Available only when the connected mobile phone has a voice recognition system. 1 Activate voice dialing. On the phone control screen: • Press [K] repeatedly to change the page on the phone control screen. 2 Select the initial. Direct number entry You can enter up to 32 numbers. • Press [ ] to cancel the A to Z search.
BLUETOOTH R Presettingp honenu mbers Using the Bluetooth audio player You can preset up to 5 phone numbers. 1 Display the phone control screen. (Page 39) 2 Enter the numbers on the direct number entry screen, then display the preset list. • To register a new device, see page 35. • To connect/disconnect a device, see page 37.
BLUETOOTH Settings for Bluetooth devices You can change various settings for using Bluetooth devices on the screen. 1 Display the screen. On the Home screen: • You can also display the screen by pressing [ ] on the phone control screen. (Page 39) 2 Configure the Bluetooth settings. 42 R Setting items of registered devices. You can connect a device or delete registered devices.
SETTINGS Settings for using applications of the iPod/iPhone/Android 5 Select the device type (1), then press [Next] (2). Before using applications of the iPod/iPhone/ Android such as Pandora and iHeartRADIO, select the device to use and connection method. 1 Pair the iPod/iPhone/Android device 2 Display the screen. On the Home screen: 6 Select the connection method (1), then press [Next] (2).
SETTINGS Soundad justment R Using the sound equalization • The adjustment is memorized for each source until you adjust the sound again. If the source is a disc, the adjustment is stored for each of the following categories. – DVD/DVD-VR/VCD – CD – DivX/MPEG1/MPEG2/MP3/WMA/WAV • You cannot adjust the sound when the AV source is turned off. Storing your own adjustment—Customizing preset sound mode 1 Select a sound mode. (See the left column.
SETTINGS R Adjusting the crossover frequency 1 Display the screen. On the Home screen: Adjustment for video playback R Adjusting the picture 3 Select [ ] (dimmer on) or [ ] (dimmer off). You can adjust the picture quality. 1 Display the
SETTINGS R Changing the aspect ratio * You can change the aspect ratio for video playback. • You cannot change the aspect ratio while playing USB device. 1 Display the
SETTINGS To change the panel color: Changing display design Select> screen. You can change the background and panel color. 1 Display the screen. On the Home screen: 3 Display the
SETTINGS Customizing the Home screen Customizing the system settings You can arrange the items to display on the Home screen. 1 Display the
SETTINGS R Updating the system You can update the system by connecting a USB device containing an update file. t To update the system, visit . 1 Create an update file, copy it to a USB device, and connect it to the unit. 2 Display the It may take a while. If the update has been completed successfully, “Update Completed” appears. Reset the unit. t To finish the procedure, press [ ].
SETTINGS R setting screen t You can also display setting screen by pressing [ ] on the screen. t Auto (Initial): Dims the screen and button illumination when you turn on the headlights. – The ILLUMI lead connection is required. t On: Activates dimmer. t Off: Cancels. Change the display design (background and panel t On: Displays the clock while a video source is played back. t Off (Initial): Cancels.
REMOTEC ONTROLLER Installing the batteries Operations using the remote controller (RM-RK256) R Installing the batteries R03/LR03/AAA R Basic button functions ATT DISP Insert the batteries into the remote controller by matching the polarity (+ and –) correctly. • If the effectiveness of the remote controller decreases, replace the batteries. V Caution: • Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
REMOTE CONTROLLER F/G/D/E • DVD-Video: Makes selection/ settings. • DivX: Skips back or forward by about 5 minutes. ENT Confirms selection. OSD/ Does not function for this unit. DUAL/ Does not function for this unit. SHIFT Functions with other buttons. DIRECT/CLR • Enters direct search mode when pressed with the SHIFT button. (See the right column.) • Erases a misentry when pressed with the SHIFT button. • “SURROUND” function does not work for this unit.
CONNECTION/INSTALLATION Before installing the unit V WARNING • If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box. • Do not cut out the fuse from the ignition wire (red) and the battery wire (yellow). The power supply must be connected to the wires via the fuse.
CONNECTION/INSTALLATION R Installation procedure 1 To prevent a short circuit, remove the key 2 3 4 5 6 7 8 9 from the ignition and disconnect the · battery. Make the proper input and output wire connections for each unit. Connect the speaker wires of the wiring harness. Connect the wiring harness wires in the following order: ground, battery, ignition. Connect the wiring harness connector to the unit. Install the unit in your car. Reconnect the · battery. Press the reset button.
CONNECTION/INSTALLATION Connection R Connecting wires to terminals Page 57 Page 58 REVERSE Purple with white stripe GEAR SIGNAL (Reverse sensor wire) Pages 56 – 57 USB terminal: Pages 56 – 57 Connect to the vehicle’s reverse lamp harness when using the optional rear view camera. PARKING Light green BRAKE (Parking sensor wire) Connect the antenna cord to the antenna terminal. 3 10 A fuse Connect to the vehicle’s parking brake detection switch harness.
CONNECTION/INSTALLATION R Connecting a USB device USB device (commercially available) R Connecting an iPod/iPhone iPod/iPhone except for iPhone 5/iPod touch (5th Generation)/iPod nano (7th Generation) (commercially available) USB 2.0 cable (accessory of the iPod/iPhone) KS-U59 (optional accessory) iPhone 5/iPod touch (5th Generation)/iPod nano (7th Generation) (commercially available) Lightning-Digital AV adapter (accessory of the iPod/iPhone) USB 2.
CONNECTION/INSTALLATION R Connecting a Smartphone Android, etc. (with HDMI) (commercially available) R Connecting external components Android, etc. (with MHL) (commercially available) 7 Front preout • Audio left output (White) • Audio right output (Red) 8 AV-OUT/ Audio output (ø3.5 mini plug) Resistance-free stereo type mini plug 9 Expansion port for connecting SiriusXM Connect Vehicle Tuner (commercially available)* * Only for KW-V50BT Region 1/KW-V30BT Region 1.
CONNECTION/INSTALLATION R Connecting microphone for Bluetooth Connect the microphone (7) to the MIC terminal. • To install the microphone, peel off the adhesive tape, fix on the installation position, then adjust the direction of the microphone to face the driver. After installing, fix the microphone cable to the car with clamps (commercially available). Removing the unit (only for KW-V50BT R Removing the unit Region 4/KW-V30BT Region 4) 1 Remove the trim plate.
REFERENCES Maintenance R Caution on cleaning the unit Do not use any solvent (for example, thinner, benzine, etc.), detergent, or insecticide. This may damage the monitor or the unit. R To keep discs clean A dirty disc may not play correctly. If a disc does become dirty, wipe it with a soft cloth in a straight line from center to edge. Recommended cleaning method: Gently wipe the panel with a soft, dry cloth.
REFERENCES t extension code <.jpg>, <.jpeg>, <.bmp> or <.png>. t (800 x 480: png) its resolution. t be played. USB: MP3/WMA/WAV/AAC/FLAC) t (regardless of the letter case—upper/lower). t conditions below: – Bit rate: MP3: 8 kbps – 320 kbps WMA: 48 kbps – 192 kbps AAC: For discs: 16 kbps – 320 kbps For USB: 32 kbps – 320 kbps – Sampling frequency: MP3: 8 kHz – 48 kHz WMA: For discs: 32 kHz – 48 kHz For USB: 8 kHz – 48 kHz WAV: 44.
REFERENCES Unplayable discs • Unplayable disc types and formats are as follows: – DVD-Audio/DVD-ROM discs – MPEG4/WAV/JPEG/FLAC/MKV/DVD+VR/DVDRAM recorded on DVD-R/RW or +R/+RW – SVCD (Super Video CD), CD-ROM, CD-I (CD-I Ready), DTS-CD – MPEG4/WAV/JPEG/FLAC/MKV recorded on CD-R/RW • Discs that are not round. • Discs with coloring on the recording surface or discs that are dirty. • Recordable/Rewritable discs that have not been finalized. • 3 inch disc.
REFERENCES R Notes on playing iPod/iPhone • iPod/iPhone that can be connected to this unit: Made for – iPod with video – iPod classic – iPod nano (7th Generation) – iPod nano (6th Generation) – iPod nano (5th Generation) – iPod nano (4th Generation) – iPod nano (3rd Generation) – iPod touch (5th Generation) – iPod touch (4th Generation) – iPod touch (3rd Generation) – iPod touch (2nd Generation) – iPod touch (1st Generation) – iPhone 5 – iPhone 4S – iPhone 4 – iPhone 3GS – iPhone 3G – iPhone • When operatin
REFERENCES R Using Apps of iPod touch/iPhone SAFETYI NSTRUCTIONS Use of the iPhone Navigation App is only permitted if the traffic conditions are suitable and you are absolutely sure that no risk, obstruction or injury will be incurred to you, your passengers or other road users. The requirements of the Road Traffic Regulations must always be followed and may vary by state. The destination must not be entered while the vehicle is in motion.
REFERENCES “Request time out”: • A network (WiFi connection, server) error has occurred. “Station not selected”: • No station is selected. “Station cannot be saved”/“Station cannot be created”/“Station cannot be deleted”: • The station cannot be saved, created, or deleted. “Pandora upgrade required”: • The Pandora application on your iPod touch/ iPhone/Android is not the latest version. Update the application. “Check App”: • The Pandora application on your iPod touch/ iPhone/Android is not started up.
REFERENCES R Discs R USB Disc can be neither recognized nor played back. • Eject the disc forcibly. (Page 3) “Now Reading...” does not disappear from the screen. • Turn the power off and on again. Recordable/Rewritable discs cannot be played back. • Insert a finalized disc. • Finalize the discs with the component which you used for recording. While playing a track, sound is sometimes interrupted. • The tracks are not properly copied into the USB device. Copy tracks again, and try again.
REFERENCES R Bluetooth Phone sound quality is poor. t Reduce the distance between the unit and the Bluetooth mobile phone. t Move the car to a place where you can get a better signal reception. The sound is interrupted or skipped while using a Bluetooth audio player. t Reduce the distance between the unit and the Bluetooth audio player. t Disconnect the device connected for Bluetooth phone. t Turn off, then turn on the unit. t (When the sound is not yet restored) connect the player again.
REFERENCES R DVD player section D/A Converter Audio Decoder 24 bit Linear PCM/Dolby Digital/MP3/ WMA/AAC Video Decoder MPEG1/MPEG2/DivX Wow & Flutter Below Measurable Limit Frequency Response 96 kHz Sampling: 20 Hz to 22 000 Hz 48 kHz Sampling: 20 Hz to 22 000 Hz 44.1 kHz Sampling: 20 Hz to 20 000 Hz Total Harmonic Distortion 0.010% (1 kHz) Signal to Noise Ratio 94 dB (DVD-Video 96 kHz) Dynamic Range Disc Format 91 dB (DVD-Video 96 kHz) DVD-Video/DVD-VR/VIDEO-CD/ CD-DA Sampling Frequency 44.
REFERENCES R AM tuner section Frequency Range (10 kHz) 530 kHz to 1 700 kHz Signal to Noise Ratio 65 dB Usable Sensitivity 28 dBμ R Videos ection Color System of External Video Input NTSC/PAL External Video Input Level (RCA/mini jack) 1 Vp-p/75 Ω External Audio Max Input Level (mini jack) 2 V/25 kΩ Video Output Level (RCA jack) 1 Vp-p/75 Ω Audio Output Level (mini jack) 1.2 V/10 kΩ R Audio section Maximum Power (Front & Rear) 50 W × 4 Full Bandwidth Power (Front & Rear) (4 Ω, 14.
REFERENCES • DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license. • ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos.
Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Still having trouble?? USA ONLY Call 1-800-252-5722 http://www.jvc.
READ THIS FIRST To use 2-Way Android Control, your Android device requires : 1. MHL or HDMI output You can confirm MHL enabled devices at www.mhlconsortium.org or scan here with your device. *Samsung Gala xy S Ill, S4, Note II, Note 3 also require a 5-pin to 11 -pin MHL Cable Adapter. 2. Bluetooth HID Profile and Serial Port Profile support Please check the supported Bluetooth profiles on your device specification sheet I website. 3. Android 4.1 and up 4.
2. Install App 1) Visit Google Play, and install JVC Smartphone Control app 2) Open JVC Smartphone Control app 3) Turn Accessibility Mode on 3. Set up JVC Receiver 1) 2) 3) 4) 5) 6) 7) Push [HOME] - [All] - [A V Off] key Push [HOME] - [Settings] - [System] - [APP Setup] Enter [APP Connection Setup] screen, then push [Change] Select [Android I Other], then push [Next] Select [HDMI I MHL + Bluetooth], then push [Next] Select your Android device, then push [Next] Confirm settings, then push [Done] 4.
U.S.A. JVC AMERICAS CORP. TO OUR VALUED CUSTOMER THANK YOU FOR PURCHASING THIS JVC PRODUCT. WE WANT TO HELP YOU ACHIEVE A PERFECT EXPERIENCE. JVC LIMITED WARRANTY ONLY FOR PRODUCT PURCHASED IN U.S.A. JVC Americ as Corp. (JVC) warrants this product and all parts thereof, except as set forth below ONLY TOTHE ORIGINAL RETAIL PURCHASER to be FREE FROM DEFECTIVE MATER IALS AND WORKMANSHIP from the date of ori ginal purchase for the period shown below. ("The Warranty Period") .
CANADA JVC JVC CANADA INC. WARRANTY GARANTIE Warranty applies only to PRODUCT distributed in Canada by JVC Canada Inc. Lagarantls' applrque seulement aux PRODUITS distrlbues au Canada par JVC Canada Inc. JVC CANADA INC. (hereafter called "JVC") grves the following express warranty for each new JVC product distributed in Canada by JVC and sold by an authorized JVC dealer. JVC warrants that this JVC product is free, under normal use and maintenance.
