ENGLISH MONITOR WITH DVD RECEIVER INSTRUCTION MANUAL KW-V140BT KW-V240BT KW-V240BT KW-V340BT (Region 1 – DVD Region Code 1 Area) (Region 1 – DVD Region Code 1 Area) (Region 4 – DVD Region Code 4 Area) (Region 1 – DVD Region Code 1 Area) This instruction manual is used to describe the models listed above. Model availability and features (functions) may differ depending on the country and sales area. 01_KW_V_2018ST_KR_COVER.
Important Notice To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe WARNINGS and CAUTIONS in this manual. Please keep the manual in a safe and accessible place for future reference. WARNINGS To prevent accidents and damages • DO NOT install any unit or wire any cable in a location where; – it may obstruct the steering wheel and gearshift lever operations. – it may obstruct the operation of safety devices such as air bags.
Important Notice For KW-V140BT/KW-V240BT Region 1/KW-V340BT: CAUTION This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that is deemed to comply without maximum permissive exposure evaluation (MPE).
About this manual The displays and panels shown in this manual are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual displays or panels. Illustrations of KW-V240BT are mainly used for explanation. The region code of a particular model will only be stated if only one of the regions supports the particular feature with the same model name.
Component Names and Operations KW-V140BT/KW-V240BT KW-V340BT Basic Operations How to reset your unit If the unit fails to operate properly, press the reset button. KW-V140BT/KW-V240BT KW-V340BT 1 2 3 4 5 6 7 8 Reset button Loading slot M button Volume +/– buttons USB input terminal Monitor panel Screen (touch panel) button • (Press) Displays the current source control screen. • (Hold) Turns off/on the screen. 9 HOME/ button • (Press): Turns on the power. • (Hold): Turns off the power.
Getting Started Basic Operations Turning off the AV source 1 Adjusting the volume Display the source/option selection screen. KW-V140BT KW-V240BT Initial settings When you power on the unit for the first time or reset the unit, the screen appears. KW-V340BT Perform the initial settings. On the Home screen, touch as follows: Initial Settings Demonstration Language 2 Turn off the AV source.
Getting Started Select the text language used for on-screen information. • English (Initial)/Español/Français/Deutsch/ Italiano/Nederlands/Ελληνικά/Português/Türkçe/ Čeština/Polski/Magyar/Руccĸий/ / / / / / /Bahasa Malaysia/Bahasa Indonesia/ – For external monitors, only English/Spanish/ French/German/Italian/Dutch/Russian/Portuguese are available. If another language has been selected, the text language for external monitors will be set to English.
Various Screens and Operations You can display or change to other screens at any time to show information, change the AV source, change the settings, etc. Home screen When you turn on the power for the first time, the Home screen appears. • You can customize the Home screen. (Pages 7 and 45) • To display the Home screen from other screens, press HOME. KW-V140BT/KW-V240BT Touching the operation keys performs the following actions: 1 Selects or changes the playback source.
Various Screens and Operations Customizing the Home screen For KW-V140BT/KW-V240BT See on page 45. For KW-V340BT 1 Select an item to replace. On the Home screen, touch and hold the icon you want to replace. The item selection screen is displayed. 2 Select an item (1) you want to display in the selected position, then touch [ ] (2). Source control screen You can perform the playback operation from the source control screen during playback.
Various Screens and Operations Common operation keys on source control screen • The following explanations state the operation keys for KW-V240BT, unless stated otherwise. • The appearance of the operation keys may differ, however the similar operation keys have the same operations. • Available operation keys differ depends on the selected source or connected device.
Various Screens and Operations Using the pop-up short-cut menu While displaying the source control screen, you can jump to another screen by touching the operation keys on the pop-up short-cut menu. 1 To close the pop-up menu • KW-V140BT/KW-V240BT: Touch the screen anywhere other than the pop-up short-cut menu. • KW-V340BT: Touch [K] or touch the screen anywhere other than the pop-up short-cut menu. Display the pop-up short-cut menu.
Disc • If a disc does not have a disc menu, all tracks on it will be played repeatedly until you change the source or eject the disc. • For playable disc types, file types and other information, see pages 55 and 56. • If “ ” appears on the screen, the unit cannot accept the operation you have tried to do. – In some cases, without showing “ ”, operations will not be accepted. • When playing back a multi-channel encoded disc, the multi-channel signals are downmixed.
Video Disc 2 Make the settings. DISC Mode Menu Language English SET Subtitle Language English SET Audio Language English SET Dynamic Range Control Down Mix Screen Ratio Dialog Dolby Surround Stereo 16:9
Video Video menu control operations You can display the video menu control during video playback. • Available operation keys differ depend on the selected disc type and file type. Touching the operation keys performs the following actions: [ ]*1 Displays the picture size selection screen. 1 Touch [ Zoom] to change the magnification level of the picture (Zoom1, Zoom2, Zoom3, Full: Initial). 2 Touch [J] [K] [H] [I] to move the zooming frame. [ ] Displays the aspect ratio selection screen.
USB Video 2 [ MENU] [T MENU] [ [ ] ] Displays the disc menu (DVD). Displays the disc menu (DVD). Switches to the direct disc menu mode. Touch the target item to select. Displays the menu/scene selection screen. • [J] [K] [H] [I]: Selects an item. • [Enter]: Confirms the selection. • [Return]: Returns to the previous screen. Video playback for VCD Touching the operation keys performs the following actions: 1 [ ] [ ] [ ] Refer to “Video playback except VCD” on page 12.
USB Playback operations Playback information and key operation • For playback information, see “Source control screen” on page 7. • For key operations on the touch panel, see “Common operation keys on source control screen” on page 8. Selecting the file type to play You can specify the file type to play. USB File type Selecting a folder/track on the list 1 Display the folder/track list. On the source control screen, touch as follows: 2 Select the folder (1), then the item (2) in the selected folder.
Android This unit supports the Android™ application, JVC Music Play. When you use JVC Music Play via this unit, you can search for audio files by genre, artist, album, playlist and song. • For more information about JVC Music Play, visit .
Android iPod/iPhone Settings for Android playback Connecting an iPod/iPhone 1 Display the screen. On the source control screen, touch as follows: • For playable iPod/iPhone types and other information, see page 58. • You cannot watch video. Bluetooth connection Pair the iPod/iPhone with this unit via Bluetooth.
iPod/iPhone Tuner 2 Listening to the radio Select a category (1), then select a desired item (2). iPod Playlists Artist 000000001 Artist Artist 000000002 Album Artist 000000003 Songs Artist 000000004 Podcasts Artist 000000005 Playback information on the source control screen KW-V140BT/KW-V240BT Tuner Select an item in each layer until you reach and select the desired file. • Available categories differ depending on the type of iPod/iPhone.
Tuner Operation keys on source control screen • The following explanations state the operation keys for KW-V240BT, unless stated otherwise. • The appearance of the operation keys may differ, however the similar operation keys have the same operations. • See also “Common operation keys on source control screen” on page 8. Touching the operation keys performs the following actions: p [PTY]* [SEEK] 6 [SSM ]* (Hold) Presets stations automatically.
SiriusXM® Satellite Radio Tuner Selecting a preset station 1 Select the band, then display the preset station window. On the source control screen, touch as follows: (Only for KW-V340BT) Only SiriusXM® brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world of satellite radio. A SiriusXM Connect Vehicle Tuner and subscription are required.
SiriusXM® Satellite Radio Listening to the SiriusXM® Satellite Radio Playback information on the source control screen SiriusXM 7 [P1] – [P5] • (Touch) Selects a preset channel. • (Hold) Presets the current channel. 8 Signal strength indicator 9 Seek mode indicator p Operation keys* q Replay time bar for replay mode • Black: The remaining capacity • Blue: The amount of buffered contents w Playback source items shown on the Home screen. • Touching the playback source item changes the playback source.
SiriusXM® Satellite Radio Selecting a channel on the list You can obtain information on channels or select a channel to listen to. 1 Display the screen. Presetting channels in the memory 2 Select a preset channel. SiriusXM You can preset five channels for each band. P1 1 Channel Name 100Ch Tune in to a channel you want to preset.
SiriusXM® Satellite Radio 2 Perform the replay operations. • SmartFavorites is available only when you connect an SXV200 or later SiriusXM Connect Vehicle Tuner. • If you change to another band, the buffered content is cleared and new channels in the current band will start buffering. • To select the previous/next content, touch [S] or [T]. • To end scanning and continue listening to the current song/content, touch [SCAN] again. • To exit scanning, touch and hold [SCAN].
SiriusXM® Satellite Radio For teams For artists/songs/teams For traffic and weather information 1 1 1 Display the screen. On the source control screen, touch as follows: Display the screen. Display the screen.
SiriusXM® Satellite Radio For traffic and weather information On the source control screen, touch as follows: Setting reception restrictions You can limit access to SiriusXM channels, such as those with mature content. • When a traffic and weather broadcast for the selected city is received, the unit automatically switches the channel. To deactivate the Content Alert: Touch [ ] again. Switching to registered content 3 Enter a new four-digit code, then touch [Enter] to confirm.
SiriusXM® Satellite Radio Parental Lock channel selection This option allows you to manually select the channels to be locked by the parental control feature. • You can only change the setting if is set to [User]. 1 Display the screen. On the source control screen, touch as follows: To deactivate parental lock for all locked channels: Select [All Clear] for in step 1, then enter the parental code.
Pandora® (Only for KW-V140BT/KW-V240BT Region 1/KW-V340BT) You can stream Pandora from iPhone/iPod touch or Android devices. • Pandora is only available in certain countries. For more information, visit . • Because Pandora is a third-party service, the specifications are subject to change without prior notice. Accordingly, compatibility may be impaired or some or all of the services may become unavailable. • Some functions of Pandora cannot be operated from this unit.
Pandora® 1 Displays/hides other available operation keys* 2 Picture data 3 Track information • Touching [H] scrolls the text if not all of the text is shown. 4 Operation keys* 5 Playing time/playback status 6 Only for KW-V340BT: Playback source items shown on the Home screen. • Touching the playback source item changes the playback source. 4 3 [ ] Displays the list selection screen. [ ] Thumbs down to the current track and skips to the next track. [ Registers the current track as a favorite.
iHeartRadio (Only for KW-V140BT/KW-V240BT Region 1/KW-V340BT) iHeartRadio is a free, all-in-one digital radio service that lets you listen to your favorite live stations or create commercial-free, all-music custom stations featuring songs from the artists you select and similar music. You can stream iHeartRadio from iPhone/iPod touch or Android devices. • Because iHeartRadio is a third-party service, the specifications are subject to change without prior notice.
iHeartRadio 1 Displays/hides other available operation keys* 2 Picture data 3 Track information • Touching [H] scrolls the text if not all of the text is shown. 4 Operation keys* 5 Playback status 6 Only for KW-V340BT: Playback source items shown on the Home screen. • Touching the playback source item changes the playback source. * See the following “Operation keys on source control screen”.
iHeartRadio Editing the list 1 Display the screen. On the source control screen, touch as follows: Then, on the screen, touch as follows: 2 Select stations (1), then delete the selected stations (2). • A check mark appears beside the selected station. Spotify With Spotify, your music is everywhere. Working out, partying or relaxing, the right music is always at your fingertips. There are millions of songs on Spotify—from old favorites to the latest hits.
Spotify Playback operations Playback information and key operation KW-V140BT/KW-V240BT Spotify KW-V340BT 1 Displays/hides other available operation keys*2 2 Picture data 3 Track information • Touching [H] scrolls the text if not all of the text is shown. • Touching [ ]/[ ] changes the displayed information between artist ( ) and album ( ). 4 Operation keys*2 5 Playing time/playback status 6 Progress bar 7 Only for KW-V340BT: Playback source items shown on the Home screen.
Spotify 4 [ Selecting a track Displays the Spotify menu screen. ] [ ]*[ ] [ ][ [ ] ] 1 Selects a track. Other External Components Display the Spotify menu screen. AV-IN On the source control screen, touch as follows: (Only for KW-V240BT Region 4) Starts (I)/pauses (W) playback. Saves the current track/artist to . * Available only for premium account users. Creating your station (Start Radio) Start Radio is to start a radio channel based on the currently played track.
Other External Components Rear view camera Install the rear view camera (separately purchased) in the appropriate position according to the instructions supplied with the rear view camera. Operations while the camera screen is displayed To adjust the picture Touch the area shown below. Connecting a rear view camera See page 55 for more information. • To use the rear view camera, a reverse lead (REVERSE) connection is required.
Other External Components [Satellite Radio] Displays the control screen of the satellite radio source provided for the vehicle. [Media Player] Displays the control screen of the media player source provided for the vehicle. [TEL] Displays the control screen of the Bluetooth Hands Free function provided for the vehicle. [BT Streaming] Displays the control screen of the Bluetooth streaming function provided for the vehicle.
Bluetooth® Auto pairing When is set to [ON], Android or iOS (such as iPhone) devices are automatically paired when connected via USB. (Page 39) Pairing a Bluetooth device using a PIN code (for Bluetooth 2.0) 1 2 Then, on the screen, touch as follows: [System] A : [Enter] On the screen, touch as follows: : [0000] Search for the unit (“JVC KW-V”) from your Bluetooth device. Confirm the request both on the device and the unit.
Bluetooth® 2 Select the device (1) you want to connect, then select [Connection] (2). Paired Device List Device Name 1 Device Name 2 3 Device Name 3 OK Device Name 4 Connection Device Name 5 Remove Select the device (1) to connect, then return to the (2). BT Connection Settings • The status is shown as follows: – : Connection is in progress. – : A connection has been established. – : A connection can be established.
Bluetooth® Making a call 1 Display the phone control screen. On the Home screen, touch [Phone]. (See also page 6.) 2 Select a method to make a call. 1 Device Name 1 2 Device Name 2 X 1234XXXXXX 1 2 3 4 5 6 7 8 9 * 0/+ # 1 From the call history* (missed calls/received calls/dialed calls) 2 From the phone book* 3 From the preset list (Page 38) 4 Use direct number entry 5 Use voice dialling * Applicable only for mobile phone compatible with PBAP (Phone Book Access Profile).
Bluetooth® Bluetooth audio player Presetting phone numbers KW-V340BT You can preset up to five phone numbers. 1 Display the phone control screen. On the Home screen, touch [Phone]. (See also page 6.) 2 Select call history or phone book calling method (1), then select a contact (2) to preset. 1 Device Name 1 A-Z Select a preset number to store into. 1 Device Name 1 When “BT Audio” is selected as the source, you can connect up to five Bluetooth audio devices at the same time.
Bluetooth® Selecting an audio file from the menu 1 Display the audio menu. On the source control screen, touch as follows: Bluetooth settings You can change various settings for using Bluetooth devices on the screen. 1 Display the screen. On the Home screen, touch as follows: 2 Select a category (1), then select a desired item (2).
Settings Audio settings Display the
Settings Adjust the sound effect. Adjusts loudness. • OFF (Initial)/Low/High Selects the bass boost level. • OFF (Initial)/Level 1/Level 2/Level 3/Level 4/ Level 5 Reduces the driving noise by raising the bandwidth. • OFF (Initial)/ON *1 You cannot change the setting when “Tuner” is selected as the source. *2 This function works only when “DISC”/ “USB”/ “iPod”/ “Android™” is selected as the source.
Settings 2 Select the speaker type (1), select the size of the selected speaker (2), then display the screen (3). Speaker Select // Adjusts the crossover slope. Selects the phase for the speaker.
Settings Adjust and store the auto-adjustment volume level for each source. If the source is a disc, the adjustment is stored for each of the following categories: • DVD/VCD • CD • DivX*/MPEG1/MPEG2/MP3/WMA/WAV/AAC/FLAC The volume level will automatically increase or decrease when you change the source. • –15 to +6 (Initial: 00) * Only for KW-V240BT Region 4. • The color of the captured image may look different from that of the actual scene. Display settings Display the screen.
Settings 2 Change the background design Display the background design selection screen (1), select the dimmer setting (2) ([ ]: dimmer on or [ ]: dimmer off), then select the background design (3). • Selecting [Scan] changes the illumination color gradually. Storing your own scene for the background image 1 While playing a video or picture, display the screen.
Settings (Only for KW-V140BT/KW-V240BT) Adjust the brightness and blackness of the screen. Select [DIM ON] (dimmer on) or [DIM OFF] (dimmer off), then change the following settings: Arrange the items to display on the Home screen. For KW-V140BT/KW-V240BT Select an item (1) to replace, then select the item (2) you want to display in the selected position. Repeat this step to place icons for other items. Adjusts brightness.
Settings Adjust the parking guidelines according to the size of the car, parking space and so on. When adjusting the parking guidelines, make sure to use the parking brake to prevent the car from moving. mark (1), then adjust the position of the Select the selected mark (2). Initialize Make sure that A and B are horizontally parallel, and that C and D are the same length. • Touch and hold [Initialize ] for 2 seconds to set all the marks to the initial default position.
Settings 2 Select the connection method (1), then confirm the selection ([OK] or [Next]) (2). If [iPod/iPhone] is selected in step 1: When selecting [Bluetooth] as the connection method: Select the device (1), then press [OK] (2) to connect. Bluetooth Device Name 2 OK Select this when the device is connected via the USB input terminal (on the monitor panel or cable from the rear panel). [Bluetooth] • ON (Initial): Activates the key-touch tone. • OFF: Deactivates the key-touch tone.
Settings Initialize all settings you have made. Touch and hold [Enter] to initialize the settings. • After initializing the settings, adjust the settings on the screen. (Only for KW-V240BT Region 4) (Only for KW-V340BT) Displays the serial number. Adjust the touch positions of the buttons on the screen.
Settings Update the system by connecting a USB device containing an update file. • To obtain the update file, visit . Connect a USB device with the update file to the unit. System Information Updates the system application. Remote Controller Remote controller RM-RK258 is supplied for KW-V240BT Region 4. • For KW-V140BT/KW-V240BT Region 1/KW-V340BT: To use the remote controller, purchase optional remote controller, RM-RK258.
Remote Controller WARNINGS • Do not ingest the battery, as it presents a chemical burn hazard The remote controller supplied with this product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children.
Remote Controller JVC Remote APP JVC Remote is an application that connects and controls compatible JVC car receivers via Bluetooth® like a wireless remote control. You can also operate this unit from a Smartphone using JVC Remote APP. This application can display the source information of this unit on the smartphone’s screen, and enables the user to make an audio setting using the graphic user interface of this application.
Installation and Connection • If your car’s ignition does not have an ACC position, connect the ignition wires to a power source that can be turned on and off with the ignition key. If you connect the ignition wire to a power source with a constant voltage supply, such as with battery wires, the battery may be drained. • If the fuse blows, first make sure the wires are not touching to cause a short circuit, then replace the old fuse with one with the same rating.
Installation and Connection Installing the unit (Only for KW-V240BT Region 4) Installing the unit using the mounting bracket removed from the car Remove from the upper two catches of the trim plate (‘). ‘ π/[ π/[ 2 Installing the trim plate The frame can be removed from the top side in the same manner. Car bracket Note: Select the appropriate screws (supplied) for the mounting bracket.
Installation and Connection Wiring connection *1 Only for KW-V340BT. *2 Only for KW-V240BT Region 4.
References Installation and Connection Connecting external components 1 Expansion port for connecting SiriusXM Connect Vehicle Tuner (EXT I/F) (commercially available)*1 2 iDatalink input for connecting an ADS adapter (commercially available)*1 3 Steering wheel remote controller input (REMO-IN)*2 • Connect to the car’s steering remote harness using the steering remote cable («). Contact your JVC dealer for details.
References • This unit can play back files that meet the conditions below: – Bit rate: MP3: 8 kbps – 320 kbps WMA: For disc: 5 kbps – 320 kbps For USB : 32 kbps – 192 kbps AAC: 16 kbps – 320 kbps – Sampling frequency: MP3: 16 kHz – 48 kHz WMA: 8 kHz – 48 kHz WAV: 44.1 kHz AAC: 32 kHz – 48 kHz FLAC: 8 kHz – 96 kHz – Files recorded in VBR (variable bit rate), and have a discrepancy in elapsed time indication • This unit can show or display the following: – Tag: MP3: ID3 Tag (version 1.0/1.1/2.2/2.3/2.
References – This unit can recognize a total of 5 000 files and 250 folders (a maximum of 999 files per folder) in a recordable/rewritable disc. – Use only “finalized” recordable/rewritable discs. – This unit can play back multi-session recordable/ rewritable discs; however, unclosed sessions will be skipped while playing. Unplayable disc types and formats • DVD-Audio/DVD-ROM discs • SVCD (Super Video CD), CD-ROM, CD-I (CD-I Ready), DTS-CD • MPEG4/DivX*/AAC (.
References About USB playback Important Make sure all important data has been backed up to avoid losing the data. We bear no responsibility for any loss of data stored in the devices while using this unit. Playable files on a USB device • This unit can play the following types of files stored in a USB mass storage class device. – JPEG/Divx*/MPEG1/MPEG2/MP3/WMA/WAV/AAC (.aac/.
References Notes on using an iPod/iPhone • When operating an iPod/iPhone, some operations may not be performed correctly or as intended. In this case, visit the following JVC web site: • When you turn on this unit, the iPod/iPhone is charged through the unit. • The text information may not be displayed correctly. • For some iPod/iPhone models, the performance may be abnormal or unstable during operation. In this case, disconnect the iPod/iPhone device, then check its condition.
Troubleshooting “Region Code Error” appears. A You have inserted a DVD Video disc of an incorrect region code. Insert a correct region code disc. USB “Reading” does not disappear from the screen. A Turn the power off and on again. While playing a track, sound is sometimes interrupted. A The tracks are not properly copied into the USB device. Copy the tracks again, and try again. Tracks are not played back as you have intended them to play.
Troubleshooting Pandora*/iHeartRadio*/Spotify The application does not work. A The application on your iPod touch/iPhone/ Android is not the latest version. Update the application. “Please update Pandora App” appears. A The Pandora application on your iPod touch/ iPhone/Android is not the latest version. Update the application. “Please check device.” appears. A The Pandora application on your iPod touch/ iPhone/Android has not started up. A The Pandora application is not installed on the connected device.
Specifications Troubleshooting Bluetooth Phone sound quality is poor. A Reduce the distance between the unit and the Bluetooth mobile phone. A Move the car to a place where you can get a better signal reception. The sound is interrupted or skipped while using a Bluetooth audio player. A Reduce the distance between the unit and the Bluetooth audio player. Disconnect the device connected for Bluetooth phone. A Turn off, then turn on the unit. (When the sound is not yet restored) connect the player again.
Specifications DVD player section Bluetooth section DSP section D/A Converter 24 bit Technology Bluetooth 3.0 Equalizer 13 Band Audio Decoder Linear PCM/Dolby Audio/ MP3/WMA/WAV/AAC (.m4a) Frequency 2.402 GHz to 2.480 GHz Band Output Power +4 dBm (MAX), 0 dBm (AVE), Power Class 2 Maximum Communication Range Line of sight approx. 10 m (32.8 ft) Audio Codec SBC/AAC Frequency (Hz) (BAND1 – 13): 62.5/100/160/250/400/630/ 1k/1.6k/2.5k/4k/6.3k/10k/ 16k Level: −09 to +09 (−9 dB to +9 dB) Q: 1.
Specifications FM tuner section Frequency Range Video section KW-V140BT/KW-V240BT Region 1/KW-V340BT: 87.9 MHz to 107.9 MHz (200 kHz) KW-V240BT Region 4: 87.5 MHz to 108.0 MHz (50 kHz) General Color System of External Video Input NTSC/PAL Operating Voltage 14.4 V (10.
Specifications Trademarks and licenses • Dolby, Dolby Audio and the double-D symbol are trademarks of Dolby Laboratories. • “DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation registered in the US, Japan and other countries. • The “AAC” logo is a trademark of Dolby Laboratories. • Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
For updated information (the latest Instruction Manual, system updates, new functions, etc.), please visit the following website:
U.S.A. JVCKENWOOD USA Corporation TO OUR VALUED CUSTOMER THANK YOU FOR PURCHASING THIS JVC PRODUCT. WE WANT TO HELP YOU ACHIEVE A PERFECT EXPERIENCE. JVC LIMITED WARRANTY ONLY FOR PROD UCT PURCHASED IN U.S.A. JVCKENWOOD USA Corporation warrants this product and all parts thereof, except as set forth below ONLY TO THE ORIGINAL RETAIL PURCHASER to be FREE FROM DEFECTIVE MATER IALS AND WORKMANSHIP from the date of original purchase for the period shown below.
CANADA .JVC JVCKENWOOD CANADA INC. Warranty applies only to PRO:~~s~i~~~;Canada GARANTIE by JVCKENWOOD CANADA INC. La garantls' applique seulement aux PRODUITSdistrlbues au Canada par JVCKENWOOD CANADAINC. JVCKENWOOD CANADA INC. (hereafter called "JVC ") gives t he following express warranty for each new JVC product distributed in Canada by JVC and sold by an authorized JVC dealer.