ENGLISH MONITOR WITH DVD RECEIVER INSTRUCTION MANUAL KW-V240BT KW-V340BT (Region 2 – DVD Region Code 2 Area) (Region 2 – DVD Region Code 2 Area) This instruction manual is used to describe models listed above. Model availability and features (functions) may differ depending on the country and sales area. 00_KW-V2018ST_E_EN.
Important Notice To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe WARNINGS and CAUTIONS in this manual. Please keep the manual in a safe and accessible place for future reference. WARNINGS To prevent accidents and damages • DO NOT install any unit or wire any cable in a location where; – it may obstruct the steering wheel and gearshift lever operations. – it may obstruct the operation of safety devices such as air bags.
Important Notice Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for countries that have adopted separate waste collection systems) Products and batteries with the symbol (crossedout wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts.
Important Notice Italiano Con la presente, JVCKENWOOD dichiara che l΄apparecchio radio “KW-V240BT/KW-V340BT” è conforme alla Direttiva 2014/53/UE. Il testo integrale della dichiarazione di conformità UE è disponibile al seguente indirizzo internet: http://www.jvc.net/cs/car/eudoc/ Český Společnost JVCKENWOOD tímto prohlašuje, že rádiové zařízení “KW-V240BT/KW-V340BT” splňuje podmínky směrnice 2014/53/EU. Plný text EU prohlášení o shodě je dostupný na následující internetové adrese: http://www.jvc.
Important Notice Eesti Käesolevaga JVCKENWOOD kinnitab, et „KW-V240BT/ KW-V340BT“ raadiovarustus on vastavuses direktiiviga 2014/53/EL. ELi vastavusdeklaratsiooni terviktekst on kättesaadav järgmisel internetiaadressil: http://www.jvc.net/cs/car/eudoc/ HRVATSKI / SRPSKI JEZIK JVCKENWOOD ovim izjavljuje da je radio oprema “KW-V240BT/KW-V340BT” u skladu s Direktivom 2014/53/EU. Cjeloviti tekst deklaracije Europske unije o usklađenosti dostupan je na sljedećoj internet adresi: http://www.jvc.
About this manual The displays and panels shown in this manual are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual displays or panels. Illustrations of KW-V240BT are mainly used for explanation. The region code of a particular model will only be stated if only one of the regions supports the particular feature with the same model name.
Component Names and Operations KW-V240BT KW-V340BT Basic Operations How to reset your unit If the unit fails to operate properly, press the reset button. KW-V240BT KW-V340BT 1 2 3 4 5 6 7 8 Reset button Loading slot M button Volume +/– buttons USB input terminal Monitor panel Screen (touch panel) button • (Press) Displays the current source control screen. • (Hold) Turns off/on the screen. 9 HOME/ button • (Press): Turns on the power. • (Hold): Turns off the power.
Getting Started Basic Operations Turning off the AV source 1 Adjusting the volume Display the source/option selection screen. KW-V240BT Initial settings KW-V340BT When you power on the unit for the first time or reset the unit, the screen appears. Perform the initial settings. On the Home screen, touch as follows: 2 Turn off the AV source.
Getting Started Select the text language used for on-screen information. • English (Initial)/Español/Français/Deutsch/ Italiano/Nederlands/Ελληνικά/Português/Türkçe/ Čeština/Polski/Magyar/Руccĸий/ / / / / / /Bahasa Malaysia/Bahasa Indonesia/ – For external monitors, only English/Spanish/ French/German/Italian/Dutch/Russian/Portuguese are available. If another language has been selected, the text language for external monitors will be set to English.
Various Screens and Operations You can display or change to other screens at any time to show information, change the AV source, change the settings, etc. Home screen When you turn on the power for the first time, the Home screen appears. • You can customize the Home screen. (Pages 7 and 33) • To display the Home screen from other screens, press HOME. KW-V240BT Touching the operation keys performs the following actions: 1 Selects or changes the playback source. 2 Displays all playback sources and options.
Various Screens and Operations Customizing the Home screen For KW-V240BT See on page 33. For KW-V340BT 1 Select an item to replace. On the Home screen, touch and hold the icon you want to replace. The item selection screen is displayed. 2 Select an item (1) you want to display in the selected position, then touch [ ] (2). Source control screen You can perform the playback operation from the source control screen during playback.
Various Screens and Operations Common operation keys on source control screen • The following explanations state the operation keys for KW-V240BT, unless stated otherwise. • The appearance of the operation keys may differ, however the similar operation keys have the same operations. • Available operation keys differ depends on the selected source or connected device.
Various Screens and Operations Using the pop-up short-cut menu While displaying the source control screen, you can jump to another screen by touching the operation keys on the pop-up short-cut menu. 1 Display the pop-up short-cut menu. KW-V240BT 2 To close the pop-up menu • KW-V240BT: Touch the screen anywhere other than the pop-up short-cut menu. • KW-V340BT: Touch [K] or touch the screen anywhere other than the pop-up short-cut menu.
Disc • If a disc does not have a disc menu, all tracks on it will be played repeatedly until you change the source or eject the disc. • For playable disc types, file types and other information, see pages 42 and 43. • If “ ” appears on the screen, the unit cannot accept the operation you have tried to do. – In some cases, without showing “ ”, operations will not be accepted. • When playing back a multi-channel encoded disc, the multi-channel signals are downmixed.
Video Disc 2 Make the settings.
Video Video menu control operations You can display the video menu control during video playback. • Available operation keys differ depend on the selected disc type and file type. Touching the operation keys performs the following actions: Displays the picture adjustment screen. 1 Touch [DIM ON] or [DIM OFF] to turn on or off the dimmer. 2 Touch [+]/[–] to adjust the other items. • : Adjusts the brightness (−15 to +15). • : Adjusts the contrast (−10 to +10).
USB Video 2 [ MENU] [T MENU] [ [ ] ] Displays the disc menu (DVD). Displays the disc menu (DVD). Switches to the direct disc menu mode. Touch the target item to select. Displays the menu/scene selection screen. • [J] [K] [H] [I]: Selects an item. • [Enter]: Confirms the selection. • [Return]: Returns to the previous screen. Video playback for VCD Refer to “Video playback except VCD” on page 12. You can connect a USB mass storage class device such as a USB memory, digital audio player, etc.
USB Selecting a folder/track on the list Playback operations Playback information and key operation • For playback information, see “Source control screen” on page 7. • For key operations on the touch panel, see “Common operation keys on source control screen” on page 8. 1 2 Display the folder/track list. Settings for USB playback On the source control screen, touch as follows: 1 Select the folder (1), then the item (2) in the selected folder. 2 Display the screen.
Android This unit supports the Android™ application, JVC Music Play. When you use JVC Music Play via this unit, you can search for audio files by genre, artist, album, playlist and song. • For more information about JVC Music Play, visit .
Android iPod/iPhone Settings for Android playback Connecting an iPod/iPhone 1 Display the screen. On the source control screen, touch as follows: • For playable iPod/iPhone types and other information, see page 44. • You cannot watch video. Bluetooth connection Pair the iPod/iPhone with this unit via Bluetooth. (Page 23) Selecting the playback device via the connection method Wired connection 2 Make the settings.
iPod/iPhone Tuner 2 Listening to the radio Select a category (1), then select a desired item (2). Playback information on the source control screen KW-V240BT Select an item in each layer until you reach and select the desired file. • Available categories differ depending on the type of iPod/iPhone. Settings for iPod/iPhone playback 1 KW-V340BT Display the screen. On the source control screen, touch as follows: 2 Make the settings.
Tuner Operation keys on source control screen • The following explanations state the operation keys for KW-V240BT, unless stated otherwise. • The appearance of the operation keys may differ, however the similar operation keys have the same operations. • See also “Common operation keys on source control screen” on page 8. [MODE ]*1 6 (Hold) Presets stations automatically. [MONO]*1 Activates monaural mode for better FM reception (stereo effect will be lost).
Tuner 2 Selecting a preset station 1 Make the settings. Select the band, then display the preset station window. On the source control screen, touch as follows: 2 Select a preset station. E.g. Preset station window for KW-V240BT To hide the window: Touch [ ] or [ ]. Settings for other FM Radio Data System features 1 Display the screen.
Spotify With Spotify, your music is everywhere. Working out, partying or relaxing, the right music is always at your fingertips. There are millions of songs on Spotify—from old favorites to the latest hits. Just choose the music you love, or let Spotify surprise you. You can stream Spotify from iPhone/iPod touch or Android devices. • Because Spotify is a third-party service, the specifications are subject to change without prior notice.
Spotify 1 Displays/hides other available operation keys* 2 Picture data 3 Track information • Touching [H] scrolls the text if not all of the text is shown. • Touching [ ]/[ ] changes the displayed information between artist ( ) and album ( ). 4 Operation keys* 5 Playing time/playback status 6 Progress bar 7 Only for KW-V340BT: Playback source items shown on the Home screen. • Touching the playback source item changes the playback source. * See “Operation keys on source control screen” below.
Spotify Selecting a track 1 Other External Components AV-IN Display the Spotify menu screen. On the source control screen, touch as follows: Connecting an external component See page 40 for more information. Starting playback 2 Select the list type, then select a desired item. The list types displayed differ depending on the information sent from Spotify. 1 2 Select “AV-IN” as the source. Turn on the connected component and start playing the source.
Other External Components Operations while the camera screen is displayed To adjust the picture Touch the area shown below. Video menu control screen is displayed. For details, see “Video menu control operations” on page 12. • To exit video menu control screen, touch the same area again. To display parking guide line Set to [ON] (Page 34) or touch the area shown below. • To close the parking guidelines, touch the same area again.
Bluetooth® Auto pairing When is set to [ON], Android or iOS (such as iPhone) devices are automatically paired when connected via USB. (Page 28) Pairing a Bluetooth device using a PIN code (for Bluetooth 2.0) 1 Search for the unit (“JVC KW-V”) from your Bluetooth device. 2 Confirm the request both on the device and the unit.
Bluetooth® 2 3 Select the device (1) you want to connect, then select [Connection] (2). Select the device (1) to connect, then return to the (2). • The status is shown as follows: – : Connection is in progress. – : A connection has been established. – : A connection can be established. – : Disconnection is in progress. – : No connection is established.
Bluetooth® Making a call 1 Display the phone control screen. On the Home screen, touch [Phone]. (See also page 6.) 2 Select a method to make a call. To use alphabet search in the phone book 1 Touch [ A-Z]. 2 Touch the first letter you want to search for on the keypad. To search for a number, touch [1,2,3...]. 3 Select a contact you want call from the list. To display other phone numbers in the same contact You can store up to 10 phone numbers per contact. 1 Touch [ ].
Bluetooth® Presetting phone numbers Bluetooth audio player KW-V340BT You can preset up to five phone numbers. 1 2 3 Display the phone control screen. JVC Streaming DJ On the Home screen, touch [Phone]. (See also page 6.) When “BT Audio” is selected as the source, you can connect up to five Bluetooth audio devices at the same time. You can easily switch between these five devices by playing music from the device.
Bluetooth® Selecting an audio file from the menu 1 Display the audio menu. On the source control screen, touch as follows: Bluetooth settings You can change various settings for using Bluetooth devices on the screen. 1 Display the screen. On the Home screen, touch as follows: 2 Select a category (1), then select a desired item (2). Then, on the screen, touch as follows: [System] : [Enter] 2 Make the settings.
Settings Display the
Settings *1 Virtually enhances the sound space using the Digital Signal Processor (DSP) system. Select the enhance level. • OFF (Initial)/Small/Medium/Large Adjusts the left and right speaker output balance. • L15 to R15 (Initial: 0) *2 Restores the sound lost due to audio compression to a realistic sound. • OFF/ON (Initial) Virtually makes the sound more realistic using the Digital Signal Processor (DSP) system. Select the sound level.
Settings 3 Adjust the crossover frequency of the selected speaker. • Adjustable items vary depending on the selected speaker type/speaker size/crossover settings. / Adjusts the output volume of the tweeter (left/ right). Adjusts the crossover frequency for the tweeter.
Settings Adjust and store the auto-adjustment volume level for each source. If the source is a disc, the adjustment is stored for each of the following categories: • DVD/VCD • CD • DivX/MPEG1/MPEG2/MP3/WMA/WAV/AAC/FLAC The volume level will automatically increase or decrease when you change the source. • –15 to +6 (Initial: 00) • Auto (Initial): Dims the screen and button illumination when you turn on the headlights. • ON: Activates dimmer. • OFF: Deactivates dimmer.
Settings 3 Change the illumination color of the buttons on the monitor panel Display the illumination color selection screen (1), select the dimmer setting (2) ([ ]: Dimmer on or [ ]: Dimmer off), then select the illumination color (3). 3 Adjust the image (1), then capture the image (2). • ON (Initial): Activates the display demonstration. • OFF: Deactivates the display demonstration. • ON: Scrolls the displayed information repeatedly.
Settings Adjust the brightness and blackness of the screen. Select [DIM ON] (dimmer on) or [DIM OFF] (dimmer off), then change the following settings: Adjusts brightness. • –15 to +15 (Initial: 0 for dimmer on, +15 for dimmer off) Input settings Display the screen. On the Home screen, touch as follows: Then, on the screen, touch [Input]. Adjust the parking guidelines according to the size of the car, parking space and so on.
Settings System settings Display the screen. On the Home screen, touch as follows: If [Android/Other] is selected in step 1: Specify the connection method of Android/iPod/ iPhone. 1 Select the device type (1), then touch [Change] (2). Then, on the screen, touch [System]. The screen appears. Go to step 3. 3 2 E.g. System settings screen for KW-V240BT Select the connection method (1), then confirm the selection ([OK] or [Next]) (2).
Settings • ON (Initial): Activates the key-touch tone. • OFF: Deactivates the key-touch tone. Adjust the touch positions of the buttons on the screen. Touch the center of the marks at the upper left (1), the lower center (2), then the upper right (3) as instructed. Memorize, recall, or clear the settings you have made. • The memorized settings are kept even when the unit is reset.
Remote Controller You can use an optionally purchased remote controller, RM-RK258, for controlling this unit. • Refer to the instruction manual that comes with the remote controller. Changing the battery of the remote controller Remote sensor* CR2025 (+side) * DO NOT expose the remote sensor to bright light (direct sunlight or artificial lighting). Preparation Removing the battery sheet Pull the battery sheet out from the remote controller to activate the battery.
Installation and Connection Remote Controller I/W • Starts/pauses playback. • Tuner: Changes the seek mode (AUTO1, AUTO2, MANU). 3 Press ENT to confirm. To exit the search mode: Press DIRECT. Answers incoming calls. 0–9 Enters a number. JVC Remote APP 1–5 Enters a preset station number. ANGLE Not used for this unit. JVC Remote is an application that connects and controls compatible JVC car receivers via Bluetooth® like a wireless remote control. ASPECT Changes the aspect ratio.
Installation and Connection • Do not use your own screws. Use only the screws provided. If you use the wrong screws, you could damage the unit. • After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are working properly. • Do not press hard on the panel surface when installing the unit to the car. Otherwise scratches, damage, or failure may result.
Installation and Connection Installing the unit Connecting external components Catch Lock 2 Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. Remove from the upper two catches of the trim plate (“). Installing the trim plate The frame can be removed from the top side in the same manner. 3 Insert the two extraction keys (]), then pulling them as illustrated.
Installation and Connection Wiring connection *1 Only for KW-V340BT. *2 For 3-way speaker system connection, see page 40. 10 A fuse Connect the aerial cord to the aerial terminal USB input terminal (1 m)*1 Purple with white stripe To the car’s reverse lamp harness when using the optional rear view camera Light green To the car’s parking brake detection switch harness (For best safety, be sure to connect the parking sensor.
References Maintenance Cleaning the unit • Do not use any solvent (for example, thinner, benzine, etc.), detergent, or insecticide. This may damage the monitor or the unit. • Gently wipe the panel with a soft, dry cloth. Handling discs • Do not touch the recording surface of the disc. • Do not stick tape etc. on the disc, or use a disc with tape stuck on it. • Do not use any accessories for the disc. • Clean from the center of the disc and move outward. • Clean the disc with a dry silicone or soft cloth.
References • This unit cannot play back the following files: – Progressive JPEG files – Lossless JPEG files About disc playback Playable disc types • CD-DA: Audio CD, CD Text • DVD Video: Region code: 2 • Dual Disc: DVD side • VCD: Video CD (PBC compatible) • DVD Recordable/Rewritable (DVD-R/-RW, +R/+RW) – DVD Video: UDF bridge – ISO 9660 level 1, level 2, Romeo, Joliet – Other playable formats: DVD-R recorded in multi-border format (except for dual layer discs) Finalized +R/+RW (Video format only) • CD Re
References LV MG MI MK ML MN MO MR MS MT MY NA NE NO OC OM OR PA PL PS QU RM RN RO RW SA SD SG SH SI SK SL 44 Latvian, Lettish Malagasy Maori Macedonian Malayalam Mongolian Moldavian Marathi Malay (MAY) Maltese Burmese Nauru Nepali Norwegian Occitan (Afan) Oromo Oriya Panjabi Polish Pashto, Pushto Quechua Rhaeto-Romance Kirundi Rumanian Kinyarwanda Sanskrit Sindhi Sangho Serbo-Croatian Singhalese Slovak Slovenian SM SN SO SQ SR SS ST SU SW TA TE TG TH TI TK TL TN TO TR TS TT TW UK UR UZ VI VO WO XH YO ZU
Troubleshooting References iPod/iPhone that can be connected • Via the USB terminal: Made for – iPod nano (7th Generation) – iPod touch (6th Generation) – iPod touch (5th Generation) – iPhone 7 Plus – iPhone 7 – iPhone SE – iPhone 6S Plus – iPhone 6S – iPhone 6 Plus – iPhone 6 – iPhone 5S – iPhone 5C – iPhone 5 – iPhone 4S • Via Bluetooth: Made for – iPod touch (6th Generation) – iPod touch (5th Generation) – iPhone 7 Plus – iPhone 7 – iPhone SE – iPhone 6S Plus – iPhone 6S – iPhone 6 Plus – iPhone 6 – iPh
Troubleshooting “Parking off” appears. No playback picture is shown when the parking brake is not engaged. USB Discs While playing a track, sound is sometimes interrupted. The tracks are not properly copied into the USB device. Copy the tracks again, and try again. Recordable/Rewritable discs cannot be played back. Insert a finalized disc. Finalize the discs with the component which you used for recording. Tracks on the Recordable/Rewritable discs cannot be skipped. Insert a finalized disc.
Troubleshooting Sound is distorted. Deactivate the equalizer either on this unit or the iPod/iPhone. A lot of noise is generated. Turn off (uncheck) “VoiceOver” on the iPod/iPhone. For details, visit . No operations are available when playing back a track containing artwork. Operate the unit after the artwork has loaded. “Authorization Error” appears. Check whether the connected iPod/iPhone is compatible with this unit. (Page 45) Tuner SSM automatic presetting does not work.
Specifications Monitor section Picture Size (W × H) DVD player section 6.2 inches (diagonal) wide 137.5 mm × 77.2 mm D/A Converter 24 bit Audio Decoder Linear PCM/Dolby Audio/ MP3/WMA/WAV/AAC (.m4a) Display System Transparent TN LCD panel Drive System TFT active matrix system Video Decoder DivX/MPEG1/MPEG2/JPEG Number of Pixels 1 152 000 (800H × 480V × RGB) Wow & Flutter Below Measurable Limit Frequency Response Effective Pixels 99.
Specifications Bluetooth section Technology Bluetooth 3.0 Frequency 2.402 GHz to 2.480 GHz Output Power +4 dBm (MAX), 0 dBm (AVE), Power Class 2 Maximum Communication Range Line of sight approx. 10 m HPF (High Pass Filter) LPF (Low Pass Filter) Frequency (Hz): Through/30/40/50/60/70/ 80/90/100/120/150/180/ 220/250 Slope (dB/Oct.): –6/–12/–18/–24 Gain (dB): –8/–7/–6/–5/–4/–3/–2/–1/0 Frequency (Hz): 30/40/50/60/70/80/90/100/ 120/150/180/220/250/ Through Slope (dB/Oct.
Specifications Trademarks and licenses • Dolby, Dolby Audio and the double-D symbol are trademarks of Dolby Laboratories. • “DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation registered in the US, Japan and other countries. • The “AAC” logo is a trademark of Dolby Laboratories. • Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
00_KW-V2018ST_E_EN.
For updated information (the latest Instruction Manual, system updates, new functions, etc.), please visit the following website: © 2017 JVC KENWOOD Corporation 00_KW-V2018ST_E_EN.
