KW-M560BT MONITOR WITH RECEIVER INSTRUCTION MANUAL • Updated information (the latest Instruction Manual, system updates, new functions, etc.) is available from . © 2020 JVCKENWOOD Corporation !B5H-0357-31_JVC_KWM_M_En.
Contents Before Use 4 Tuner 18 Precautions.................................................................... 4 Tuner Basic Operation.............................................18 How to read this manual.......................................... 4 Memory Operation...................................................19 Selecting Operation.................................................19 Basic Operations 5 Functions of the Buttons on the Front Panel.... 5 Turning on the Unit....................
Controlling Audio 35 Speaker/ X’over setup..............................................35 Controlling General Audio.....................................36 Equalizer Control.......................................................37 Volume Offset.............................................................38 Sound Effect................................................................38 Listening Position/ DTA...........................................
Before Use Before Use Precautions # WARNINGS ÑÑTo prevent injury or fire, take ÑÑHow To Reset Your Unit • If the unit or the connected unit fails to operate properly, reset the unit. Press the button. The unit returns to factory settings. the following precautions: • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. • Do not watch or fix your eyes on the unit’s display when you are driving for any extended period.
Basic Operations Basic Operations Functions of the Buttons on the Front Panel Turning on the Unit 1 1 2 Press the [ ] button. 3 4 5 hh The unit is turned on. 6 ●● To turn off the unit: NOTE • The panels shown in this guide are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual panels. 1 Press the [ ] button for 1 second.
Basic Operations Getting Started ■■ [Camera] Set the parameters for the camera. 1 Touch [Camera]. 2 Set each item and touch [ ]. For detailed operation, see Camera Setup (P.29). Initial setup Perform this setup when you use this unit first time. 1 ■■ [DEMO] Set the demonstration mode. Default is “ON”. 1 Touch [DEMO] and set [ON] or [OFF]. Set each item as follows. 2 ■■ [Language] Select the language used for the control screen and setting items. Default is “[British English(en)]”.
Basic Operations 3 Touch [User Interface]. Adjusting the volume To adjust the volume (0 to 40), Press [＋] to increase, and press [−] to decrease. Holding [＋] increases the volume continuously to level 15. hh User Interface screen appears. 4 Touch [Clock Adjust]. Touch screen operations To perform operations on the screen, you need to touch, touch and hold, flick or swipe to select an item, display setting menu screen or to change the page, etc.
Basic Operations Display the HOME screen Gesture Touch Control: You can also control playback by moving your finger on the touch panel as follows (for some sources, the gesture control is not available). • Sliding the finger towards up/down: - Functions same as pressing [ ] / [ ] (Media) in the USB Control screen. - For the Tuner, tuner preset broadcast stations are switched. • Sliding the finger towards left/right: Functions same as pressing [E] / [F].
Basic Operations Select the playback source 1 To select the playback source on the HOME screen Touch [ ] on the HOME screen. From the screen, you can select the following sources and functions. • Switches to the Apple CarPlay screen from the connected iPhone. (P.12) • Switches to the USB Mirroring screen from the connected Android smartphone. (P.14) It is necessary to connect Android smartphone with “Mirroring OA for JVC” application installed and to set [Mode] to [Mirroring for Android™]. (P.
Basic Operations Customize Short-cut buttons on HOME screen 3 Secondary screen You can arrange the position of the source icons as you like. 1 Touch [ 2 Touch and hold the icon which you want to move to go into the customizing mode. 3 ] on the HOME screen. • [ ]/[ ] : The Secondary screen changes every time you touch it. You can also change the Secondary screen by flicking left or right on the screen. • Indicators: Displays the current source condition and so on.
Basic Operations FUNCTION screen 1 Press the [FNC] button. List screen There are some common function keys in the list screens of most sources. 1 2 6 hh FUNCTION screen appears. 2 Touch to display the FUNCTION screen. 3 4 5 1 The contents of the menu are as follows. • Displays the SETUP Menu screen. (P.31) Displays list type selection window. 2 Displays music/movie file list. • Displays the APP (Apple CarPlay/ Android Auto) screen. (P.12) • Displays the Screen Adjust screen. (P.
APPS APPS Apple CarPlay Operation Apple CarPlay is a smarter, safer way to use your iPhone in the car. Apple CarPlay takes the things you want to do with iPhone while driving and displays them on the screen of the product. You can get directions, make calls, send and receive messages, and listen to the music from iPhone while driving. You can also use Siri voice control to make it easier to operate iPhone. For details about Apple CarPlay, visit https://www.apple.com/ios/carplay/.
APPS Android Auto™ Operation Android Auto enables you to use functions of your Android smartphone convenient for driving. You can easily access route guidance, make calls, listen to music, and access convenient functions on the Android smartphone while driving. For details about Android Auto, visit https://www.android.com/auto/ and https://support.google.com/androidauto. Compatible Android smartphone You can use Android Auto with Android smartphone of Android version 5.0 or later.
APPS USB Mirroring Operation (Android only) You can display and control the App on the unit while your smartphone is connected to the USB terminal. ÑÑPreparation 1 2 ÑÑCompatible Android smartphone • Android version 7.0 or later • Linux Kernel version 3.5 or later • Bluetooth support NOTE • This unit may not work for some Android smartphone's. Download Mirroring App from the Google Play. Install the latest version of the Mirroring application “Mirroring OA for JVC” on your Android.
USB USB Connecting a USB device 1 Connect the USB device with the USB cable. (P.44) USB Basic Operation Most functions can be controlled from the source control screen and playback screen. Control screen 1 2 3 4 Press the [ Touch [ 4 ]. Touch [USB]. (P.9) Press the [ Touch [ 3 ] button. ÑÑDisconnect the USB device 1 2 3 4 2 5 6 7 Open the drawer 5 ] button. 4 ]. Touch a source other than [USB]. Detach the USB device.
USB 2 [ ]/[ Video screen ] ] : Repeats the current track/folder. Each •[ time you touch the key, repeat mode switches in the following sequence; File repeat ([ ]), Folder repeat ([ ]), Repeat all ([ ]) ] : Randomly plays all tracks in current •[ folder. Each time you touch the key, random mode switches in the following sequence; File random ([ ]), Random off ([ ]) 3 Track information Displays the information of the current file.
USB Search Operation You can search music or video files by the following operations. 1 2 Touch [1]. 3 Select the list type. Touch [S]. ÑÑLink search You can search a file of same artist/album/genre as the current track. 1 2 ÑÑCategory search You can search a file by selecting category. 1 2 Touch [Category List]. 3 Touch the desired category. Touch the desired tag type. You can select from artist, album and genre. hh The list corresponding to your selection appears.
Tuner Tuner Tuner Basic Operation 3 Operation keys Most functions can be controlled from the source control screen. To enter Tuner source, touch [Tuner] icon in the source selection screen. (P.9) Control screen 1 • [E] [F] : Tunes in a station. The method of frequency switching can be changed (see 2 in table). •[ ] : Touch to mute or not to mute. 4 Preset list • Touch on the right side of the screen to display the Preset list. Touch again to close the list. • Recalls the memorized station.
Tuner • [TI]: Indicates the reception state of traffic information. White: TP is being received. Orange: TP is not being received. Memory Operation Selecting Operation ÑÑPreset select You can list and select memorized station. 1 ÑÑAuto memory Touch [ ] on the right side of the screen. Select a station from the list. You can store stations with good reception in memory automatically. 1 Touch desired band key. ÑÑSearch by program type (FM only) 2 Touch [ ] on the left side of the screen.
Tuner Traffic Information (FM only) You can listen and watch the traffic information automatically when a traffic bulletin starts. However, this feature requires a Radio Broadcast Data System that includes the TI information. 1 Tuner Setup (FM only) You can set tuner related parameters. 1 Touch [ ] on the left side of the screen. Touch [SETUP]. Touch [ ] on the left side of the screen. Touch [TI]. hh Tuner SETUP screen appears. 2 hh Traffic information mode is set.
Bluetooth Control Bluetooth Control Using the Bluetooth function, various functions can be used: listening to the audio file, making/ receiving a call. Information for using Bluetooth® devices Bluetooth is a short-range wireless radio communication technology for mobile devices such as mobile phones, portable PCs, and other devices. Bluetooth devices can be connected without cables and communicate with each other.
Bluetooth Control Register from the Bluetooth device It is necessary to register the Bluetooth audio player or cell-phone to this unit before using the Bluetooth function. You can register up to 7 Bluetooth devices. Bluetooth Setup 1 Press the [FNC] button. hh FUNCTION screen appears. 2 Touch [ ]. NOTE • Up to 7 Bluetooth devices can be registered. If an attempt is made to register the 8th Bluetooth device, the Bluetooth device connected on the earliest date will be deleted to register the 8th one.
Bluetooth Control ÑÑConnect the Bluetooth device 1 Touch [Select Device] in the Bluetooth SETUP screen. Playing Bluetooth Audio Device Most function can be controlled from the source control screen. To enter Bluetooth source, touch [BT Audio] icon in the source selection screen. (P.9) ÑÑBluetooth basic operation Control screen 5 2 Touch [ ] you want to connect. 1 2 4 3 1 Device name/ [ NOTE • If the icon is lighted, it means that the unit will use that device.
Bluetooth Control 4 Function panel 2 Touch on the left side of the screen to display the function panel. Touch again to close the panel. • [BT DEVICE CHANGE] : Selects the device to connect via Bluetooth audio (A2DP) or APP (SPP). See Connect the Bluetooth audio (P.24). Touch the device name you want to connect. 5 Play mode indicator/ Playing time [D], [H]: Current play mode indicator The meanings of each icon are as follows; [D] (play), [B] (fast forward), [A] (fast backward), [H] (pause).
Bluetooth Control Using Hands-Free Unit You can use telephone function by connecting the Bluetooth telephone to this unit. NOTE • While Apple CarPlay or Android Auto is being connected, Bluetooth Hands-Free function cannot be used. Only Apple CarPlay or Android Auto Hands-Free function can be used. ●● Bluetooth SETUP 1) Touch [ ]. Bluetooth SETUP screen appears. NOTE • The status icons such as battery and antenna displayed may differ from those displayed on the cell-phone.
Bluetooth Control Call using the preset number ÑÑVoice Recognition 1 2 You can access the voice recognition function of the cell-phone connected to this unit. You can search the cell-phone phonebook by voice. (The functionality depends on the cell-phone.) Touch [ ]. Touch the Name or phone number. 1 Press the [ ] button. hh Voice Recognition screen appears. 2 Call using the phonebook 1 2 Touch [ 3 Select the phone number from the list. ]. Start speaking.
Bluetooth Control ÑÑReceive a call 1 ÑÑOperations during a call Touch [ ] to answer a phone call or [ to reject an incoming call. ] ●● Adjust the receiver volume Press the [−] or [＋] button. NOTE • While monitoring the view camera, this screen does not appear even if a call comes in. To display this screen, return the shift knob of car to the driver position. To end call 1 While talking, touch [ ]. ●● Output the dial tone Touch [DTMF] to display the tone input screen.
Bluetooth Control ÑÑPhone number preset ■■ [Delete] To delete a preset number, touch [Delete] and then touch [Yes] on the confirmation screen. You can register frequently used phone numbers to this unit. 1 2 Touch [ ]. Touch [Edit]. ÑÑPhonebook transfer You can transfer the phonebook in your Bluetooth smartphone via PBAP. 1 2 3 Touch [ ]. Touch [ ]. Select where to preset. hh The phonebook data transmission starts.
Other External Components Other External Components ÑÑCamera Setup View Camera NOTE • To connect a camera, see P.44. • To use a rear view camera, a REVERSE lead connection is required. (P.44) • The rear view screen is displayed when you shift the gear to the reverse (R) position. 1 Press the [FNC] button. hh FUNCTION screen appears. 2 Touch [ ]. hh SETUP Menu screen appears. 3 Touch [Camera]. ÑÑDisplay the camera screen 1 Press the [FNC] button. hh FUNCTION screen appears.
Other External Components To adjust the parking guidelines NOTE External audio/video players— AV-IN • Install the rear view camera in the appropriate position according to the instructions supplied with the rear view camera. 1 Connect an external component to the AV-IN input terminal. (P.44) • When adjusting the parking guidelines, make sure to use the parking brake to prevent the car from moving. 2 3 Select [AV-IN] as the source. (P.9) 1 Touch [ON] of [Parking Guidelines] in the Camera screen.
Setting Up Setting Up Monitor Screen Setup You can adjust image quality in video screen. 1 Press the [FNC] button. hh FUNCTION screen appears. 2 Touch [ ]. System Setup 1 Press the [FNC] button. hh FUNCTION screen appears. 2 Touch [ ]. hh Screen Control screen appears. 3 Adjust each item as follows. ■■ [Contrast] / [Brightness] / [Color] / [Tint] Adjusts each item. NOTE • Adjusting items are different depending on the current source. hh See the following section for each setting.
Setting Up User Interface Setup You can setup user interface parameters. 1 Press the [FNC] button. hh FUNCTION screen appears. 2 Touch [ ]. hh SETUP screen appears. 3 Touch [User Interface]. hh User Interface screen appears. 4 ÑÑLearning function of steering remote This function is available only when your vehicle is equipped with the electrical steering remote controller. If your steering remote controller is not compliant, learning may not be completed and error message may appear.
Setting Up Special Setup You can setup Special parameters. 1 Press the [FNC] button. hh FUNCTION screen appears. 2 Touch [ ]. hh SETUP screen appears. 3 Touch [Special]. Display Setup 1 Press the [FNC] button. hh FUNCTION screen appears. 2 Touch [ ]. hh SETUP screen appears. 3 Touch [Display]. hh Display screen appears. hh Special screen appears. 4 4 ■■ [DEMO] Set the demonstration mode. Default is “[ON]”. ■■ [Software Information] Check the software version of this unit. (P.
Setting Up To register original image You can load an image from the connected USB device and set it for the background image. Before operating this procedure, it is necessary to connect the device which has the image to load. 1 Touch [User1 Select] or [User2 Select] in the Background screen. 2 Select the image to load. AV Setup You can set AV parameters. 1 Press the [FNC] button. hh FUNCTION screen appears. 2 Touch [ ]. hh SETUP screen appears. 3 Touch [AV]. hh AV screen appears.
Controlling Audio Controlling Audio You can adjust the various settings such as audio balance or subwoofer level. 1 Press the [FNC] button. hh FUNCTION screen appears. 2 Touch [ ]. hh See the following section for each setting. • Set up speaker/ X’over (P.35) • Controlling equalizer (P.37) • Set listening position/ DTA (P.39) • Controlling general audio (Fader / Balance) (P.36) • Set volume offset (P.38) • Set sound effect (P.38) Speaker/ X’over setup 1 Press the [FNC] button.
Controlling Audio ■■ [Tweeter] (Only for Front) You can set the tweeter when you are selecting front speakers. [None], [Small], [Medium], [Large] ■■ [TW] (Tweeter) [Gain]*2 Adjusts the tweeter level. (When front is selected on Speaker Select screen) ■■ [Phase Inversion]*3 Sets the phase of subwoofer output. Check [Phase Inversion] to shift the phase 180 degrees. (When subwoofer is selected on Speaker Select screen) ■■ [Xʼover] Displays the speaker crossover setup screen.
Controlling Audio Equalizer Control ■■ [SW Level] Adjusts the subwoofer volume. You can adjust equalizer by selecting the optimized setting for each category. ÑÑRecall the EQ curve 1 1 2 Press the [FNC] button. hh FUNCTION screen appears. 2 Touch [ ]. hh Audio screen appears. 3 Touch [Equalizer]. 4 Touch the screen and set the Graphic Equalizer as desired. Touch [Preset Select]. Select EQ curve. ÑÑSave the EQ curve 1 2 3 Adjust the EQ curve. Touch [Memory]. Select where to save.
Controlling Audio Volume Offset Finely adjust the volume of the current source to minimize the difference in volume between different sources. Sound Effect You can set sound effects. 1 Press the [FNC] button. hh FUNCTION screen appears. Press the [FNC] button. hh FUNCTION screen appears. 2 2 Touch [ ]. hh Audio screen appears. Touch [ ]. hh Audio screen appears. 3 Touch [Sound Effect]. 3 Touch [Volume Offset]. 4 Set each item as follows. 1 4 Touch [＋] or [−] to adjust the level.
Controlling Audio Listening Position/ DTA Adjust the sound delay time as nearer speakers to the selected seat have more delay time, so that the sound from each speaker arrive a listener at the same time. 1 Press the [FNC] button. hh FUNCTION screen appears. 2 Touch [ ]. hh Audio screen appears. 3 Touch [Position/DTA]. 4 Select listening position from [Front R] (Right front), [Front L] (Left front), [Front All] (All front), and [All].
Remote control Remote control This unit can be operated using the remote control RM-RK258 (optional accessory). Functions of the Remote control Buttons Key Name Function Numeric Keypad Specifies the number to search in direct search. For details on the direct search mode, see Direct search mode (P.40). [CLR] Deletes a character while in direct search mode. [ENT] Performs the selected function. ÑÑDirect search mode Using the remote control, you can jump directly to the tuner frequency.
Connection/Installation Connection/Installation Before Installation Before installation of this unit, please note the following precautions. # WARNINGS • If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box. • Do not cut out the fuse from the ignition wire (red) and the battery wire (yellow).
Connection/Installation ÑÑSupplied accessories for Installing the unit installation 1 NOTE 2 (3 m) x1 x1 3 4 • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (eg, the sound may skip). ÑÑJapanese cars (2 m) x1 x1 5 or 6 Car Bracket 6 5 (M5 × 6 mm) (M5 × 8 mm) x6 7 x6 8 x1 5 or 6 x1 ÑÑTrim plate 1) Attach accessory 2 to the unit.
Connection/Installation ÑÑMicrophone unit 1) Check the installation position of the microphone (accessory 1). 2) Clean the installation surface. 3) Remove the separator of the microphone (accessory 1), and stick the microphone to the place shown below. 4) Wire the microphone cable up to the unit with it secured at several positions using tape or other desired method. 5) Adjust the direction of the microphone (accessory 1) to the driver. 1 Fix a cable with a commercial item of tape.
Connection/Installation ÑÑConnecting wires to terminals Connect to vehicle’s steering remote harness. Contact your JVC dealer for details. ST REMOTE INPUT 1 Bright Green/Red ST REMOTE INPUT 2 Purple/Red ST REMOTE GND Gray/Red STEERING WHEEL REMOTE INPUT Light Blue/Yellow (Steering remote control wire) To steering remote To use the steering wheel remote control feature, you need an exclusive remote adapter (not supplied) matched to your car. USB terminal[1] (1.0 m) 5V=1.
Connection/Installation ÑÑConnecting an iPhone/Android Android smartphone[2] USB cable[2] iPhone[2] Lightning connector KS-U62 (0.8m)[3] Accessory 7 Accessory 8 Speaker impedance: 4-8 Ω White USB terminal[1] (1.0 m) 5V=1.5A To front left speaker White/Black Gray Cap To front right speaker Gray/Black Green To rear left speaker Green/Black Purple To rear right speaker Purple/Black [2] ANT.CONT Blue (Power control/ Antenna control wire) SB maximum power supply current : U DC 5 V = 1.
Troubleshooting Troubleshooting Problems and Solutions If any trouble occurs, first check the following table for possible problems. NOTE • Some functions of this unit may be disabled by some settings made on this unit. • What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. ÑÑAbout settings • Cannot set up the subwoofer. • Cannot set up subwoofer phase. • No output from the subwoofer. • Cannot set up the low pass filter.
Appendix Appendix Playable Media and Files You can play various kinds of media and files on this unit. ÑÑAbout files The following audio and video files are supported. ■■Playable Audio files Format AAC-LC (.m4a) MPEG2/4 AAC LC HE-AAC(V1,V2) MP3 (.mp3) MPEG 1/2 Audio Layer 3 WMA (.wma) Windows Media Audio Standard L3 profile (Version 7,8,9) Linear PCM RIFF waveform Audio Format (WAVE) (.wav) FLAC (.flac) flac Vorbis (.
Appendix Specifications ■■Monitor section Picture Size : 6.75 inches (diagonal) wide : 151.8 mm (W) × 79.7 mm (H) Display System : Transparent TN LCD panel Drive System : TFT active matrix system Number of Pixels : 1,152,000 (800H × 480V × RGB) Effective Pixels : 99.99% Pixel Arrangement : RGB striped arrangement Back Lighting : LED ■■USB interface section USB Standard : USB 2.0 High Speed File System : FAT 16/ 32, exFAT Maximum Power Supply Current : DC 5 V 1.
Appendix ■■FM tuner section ■■Audio section Frequency Range (step) : 87.5 MHz – 108.0 MHz (50 kHz) Maximum Power Output (Front & Rear) : 45 W × 4 Usable Sensitivity (S/N: 30 dB) : 16.2 dBf (1.8 μV/75 Ω) Full Bandwidth Power (at less than 1% THD) : 21 W × 4 Frequency Response (± 3.0 dB) : 30 Hz – 14 kHz Output Frequency Band : 20 – 20,000 Hz S/N (dB) : 50 dB (MONO) Preout Level (V) : 2 V/ 10 kΩ Stereo Separation : 35 dB (1 kHz) Preout Impedance : 1.
Appendix About this Unit ■■Copyrights • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by JVCKENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners. • Windows Media is a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. • This product is protected by certain intellectual property rights of Microsoft.
Appendix –– Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. –– Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
Appendix ■■For Turkey Bu ürün 28300 sayılı Resmi Gazete’de yayımlanan Atik Elektrikli ve Elektronik Eşyalarin Kontrolü Yönetmeliğe uygun olarak üretilmiştir. Declaration of Conformity with regard to the RE Directive 2014/53/EU Declaration of Conformity with regard to the RoHS Directive 2011/65/EU Manufacturer: JVCKENWOOD Corporation 3-12, Moriyacho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0022, JAPAN EU Representative: JVCKENWOOD Europe B.V.
Important Notice on Software EULA ÑÑSoftware License on This Product ÑÑSoftware License Agreement The software embedded in this product comprises a number of independent software components, each of which is copyrighted by JVCKENWOOD Corporation or by a third party. JVCKENWOOD Corporation (hereinafter called “Licensor”) holds either the copyright to the embedded software or the right to sublicense it. This agreement establishes the conditions under which the customer uses this “Licensed Software.
Article 3 (Terms of License) Article 8 (Cancellation of the Agreement) 1. In assigning this product, User may not retain the original copy of the embedded Licensed Software (including associated literature, updates and upgrades) and any duplicates and associated literature with regard to the license to use Licensed Software. User may transfer Licensed Software only to the condition of binding the assignee to abide by the terms of this Software License Agreement.
!B5H-0357-31_JVC_KWM_M_En.
