KW-M25BT MONITOR WITH RECEIVER INSTRUCTION MANUAL • Updated information (the latest Instruction Manual, etc.) is available from . Model name indication position See “Removing the trim plate” (P.22) Trim plate © 2019 JVC KENWOOD Corporation !B5A-3197-00_KWM.
Contents Before use.....................................................................................2 How to read this manual........................................................................................2 Precautions.....................................................................................................................2 Getting Started...........................................................................3 Clock settings........................................................
Getting Started 1 Turn the ignition key of your car to ACC. The unit is turned on. 2 Press the < > button. 3 Touch [Settings]. BT Auto Connection The unit automatically reconnect when the last connected Bluetooth device is within range. “ON” (Default), “OFF” Clock Setting Adjust the clock time. (P.4). Default Touch [Default] to set all the settings to the initial default settings. 5 Touch [6]. 4 Touch the corresponding key and set the value. Audio Sound Effect Displays the Equalizer screen. (P.
Getting Started Clock settings ÑÑSynchronizing the clock time with FM RDS Activate [RDS Clock Sync]. See “Tuner Setup” (P.13). ÑÑAdjusting the clock manually ✎✎NOTE • Deactivate [RDS Clock Sync] before adjusting the clock. See “Tuner Setup” (P.13). Touch panel adjustment 1 Press the < > button. 2 Touch [Settings]. 3 Touch [Display]. 4 Touch [Panel Adjust]. 5 Follow the instruction on the screen and touch the center of each +. 1 Press the < > button. 2 Touch [Settings]. 3 Touch [General].
Basics Basics Functions of the Buttons on the Front Panel 1 2 Common operations ÑÑTurning on the power 1 Press the < > button. 3 4 5 6 1 Remote Sensor • Receives the remote control signal. 2 (HOME) • Displays the HOME screen. (P.6) • Pressing for 1 second turns the power off. • When the power off, turns the power on. 3 EQ • Displays the Equalizer screen.* (P.18) * During video file playback, you can set only the preset equalizer curve.
Basics HOME screen descriptions 1 Press the < Source control screen descriptions You can perform source playback operations on the source control screen. > button. 1 5 2 3 HOME screen appears. 2 3 4 4 1 5 6 7 1 Clock display Touch to displays the Clock screen. 2 Switches to the radio broadcast. (P.12) 3 [USB] Plays files on a USB device. (P.7) [iPod] Plays an iPod/iPhone. (P.9) • When iPod/iPhone is connected. [Mirroring] Displays the Mirroring screen.(P.
USB USB Preparation ÑÑConnecting a USB device 1 Remove the cap of the USB terminal. 2 Connect the USB device with the USB cable. Playback operations ÑÑControl the music you are listening to on the source control screen 6 1 The unit reads the device and playback starts. ÑÑTo disconnect the USB device 1 Press the < > button. 2 Touch a source other than [USB]. 3 Detach the USB device. ÑÑUsable USB device This unit can play MPEG1/ MPEG2/ MPEG4/ H.
USB ÑÑPlaying videos and pictures ÑÑSelecting a track in a list (Searches file) 1 When the operation buttons are not displayed on 1 Touch [ ]. 2 Select whether you search by audio files [ the screen, touch the display. 1 5 video files [ ] or picture files [ ], ]. 4 2 2 3 1 D, etc.
iPod/iPhone iPod/iPhone Preparation Playback operations ÑÑConnecting iPod/iPhone • For Lightning connector models: Use USB Audio cable for iPod/iPhone—KS-U62 (optional accessory). • For details about connecting iPod/iPhone, see page 24 . 1 Remove the cap of the USB terminal. 2 Connect the iPod/iPhone. The unit reads the device and playback starts. ÑÑTo disconnect the iPod/iPhone 1 Press the < > button. 2 Touch a source other than [iPod]. 3 Detach the iPod/iPhone.
iPod/iPhone ÑÑSelecting a content in a list 1 Touch [ ]. 2 Touch desired item. When you touch a category its contents are displayed. 3 Touch desired item from the content list. Playback starts. • Touch [6] to moves to the upper hierarchy. ✎✎NOTE • The source control screen appears when you touch [6] at the top hierarchy. 10 !B5A-3197-00_KWM.
Mirroring Mirroring Preparation Pair your smartphone with the unit via Bluetooth. See Register your smartphone to the unit (P.15) and Connect the Bluetooth device. Mirroring operations ÑÑMirroring Operation 1 Touch [Mirroring]. ÑÑCompatible Android smartphone • Android version 7.0 or later • Bluetooth support ✎✎NOTE • This unit may not work for some Android smartphone’s. ÑÑConnecting Android smartphone • For details about connecting Android smartphone, see page 24 .
Tuner ÑÑManual memory Tuner Basic Operation You can store the current receiving station in memory. 1 Press the < > button. 2 Touch [Tuner]. 1 Tune in to a station you want to preset. 2 Touch and hold [#] (#:1-6) in which you want to ÑÑSource control screen 1 store the station. 5 2 3 4 1 Displays the information of the current station: PS name, Frequency, PTY Genre, Indicator Items [<<] [>>] : Touch to the next frequency manually. 2 Recalls the memorized station.
Tuner Tuner Setup ÑÑFunction menu 1 Press the < > button. 2 Touch [Settings]. AF When station reception is poor, automatically switches to the station that is broadcasting the same program over the same Radio Data System network. “ON” (Default), “OFF” 5 Touch [6]. 3 Touch [Tuner]. 4 Set each item as follows. Stereo Determines whether to receive stereo broadcasts in the stereo mode or monaural mode (the MONO indicator lights up).
External Components External Components Using external audio/video players ÑÑStarting playback 1 Connect an external component to the AV-IN input terminal. (P.23) 2 Press the < > button. 3 Touch [AV-IN]. 4 Turn on the connected component and start Rear view camera To use a rear view camera, the REVERSE lead connection is required. For connecting a rear view camera. (P.
Bluetooth smartphone Bluetooth smartphone ÑÑAbout the Bluetooth smartphone and Bluetooth audio player This unit conforms to the following Bluetooth specifications: Version Bluetooth Ver.2.1 + EDR Profile Smartphone/ Cell-phone: HFP (V1.6) (Hands Free Profile) PBAP (V1.1.1) (Phonebook Access Profile) Audio player: A2DP (V1.2) (Advanced Audio Distribution Profile) AVRCP (V1.
Bluetooth smartphone Make a phone call 1 Press the < > button. 2 Touch [Phone]. 3 See the table below for each operation method. • [ • [ ] : Disconnects the Bluetooth smartphone. ] : Closes the screen for sending tones while talking. • [ ] : Displays the screen for deleting the previously registered Bluetooth devices. (P.17) Call by entering a phone number 1) Touch [ ]. 2) Enter a phone number with number keys. 3) Touch [Û]. Make a call • Touch [W] to delete the last entry.
Bluetooth smartphone Playing Bluetooth Audio Device Delete the registered Bluetooth device 1 Press the < > button. 2 Touch [BT Audio]. ÑÑSource control screen 3 1 Press the < > button. 2 Touch [Phone]. 3 Touch [ ]. 4 Touch the device name. 2 1 1 [L] : Plays or pauses. [E] [F] : Searches the previous/next content. 2 Displays the information of the current file. Only a file name and a folder name are displayed if there is no tag information. 3 D, etc.
Controlling Audio Controlling Audio Controlling General Audio Equalizer Control 1 Press the < > button. 2 Touch [Settings]. 3 Touch [Audio]. 4 Touch [Sound Effect]. 5 Touch [ ]. 6 Set each item as follows. 1 Press the < > button. 2 Touch [Settings]. 3 Touch [Audio]. 4 Touch [Sound Effect]. 5 Set each item as follows. 1 2 Adjust the front and rear volume balance. ] 12 (front) to -12 (rear) Balance Adjust the left and right volume balance.
Remote control Remote control This unit can be operated using the remote control. The remote control RM-RK258 (optional accessory) can be used. !!WARNING • Do not ingest the battery, Chemical Burn Hazard The remote control supplied with this product contains a coin / button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children.
Installation Installation Before Installation Before installation of this unit, please note the following precautions. #WARNINGS • If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box. • Do not cut out the fuse from the ignition wire (red) and the battery wire (yellow).
Installation ÑÑInstallation procedure 1) To prevent a short circuit, remove the key from the ignition and disconnect the ¤ terminal of the battery. 2) Make the proper input and output wire connections for each unit. 3) Connect the wire on the wiring harness. 4) Take Connector B on the wiring harness and connect it to the speaker connector in your vehicle. 5) Take Connector A on the wiring harness and connect it to the external power connector on your vehicle.
Installation ÑÑRemoving the trim plate ÑÑRemoving the unit 1) Use the extraction key (accessory 3) to lever out the four tabs (two on the left part, two on the right part). 1) Remove the trim plate by referring to step 1 in “Removing the trim plate”. 2) Insert the extraction key (accessory 2) deeply into the slot as shown. (The protrusion at the tip of the extraction key must face toward the unit.) 3 2) Pull the trim plate forward.
Installation ÑÑConnecting wires to terminals Light Green (Parking sensor wire) Accessory 5 Extension cable USB device[2] PARKING BRAKE USB terminal[1] (0.8 m) 5V=1A Cap Accessory 4: Bluetooth Microphone For best safety, be sure to connect the parking sensor. Connect to the vehicle’s parking brake detection switch harness. MIC REVERSE GEAR SIGNAL Purple/White (Reverse sensor wire) Connect to vehicle’s reverse lamp harness when using the optional rear view camera.
Installation ÑÑConnecting an iPod/iPhone ÑÑConnecting an Android smartphone iPod/iPhone[2] Lightning connector KS-U62 (0.8m) [3] Android smartphone[2] Micro USB to USB cable USB terminal[1] (0.8 m) USB terminal[1] (0.
About this Unit About this Unit More information Troubleshooting ÑÑPlayable Audio files Audio format MP3 (.mp3) Bit rate 16 – 320kbps, VBR WMA (.wma) 16 – 320kbps AAC-LC (.m4a) 16 – 320kbps WAV (.wav) – FLAC (.flac) – Sampling frequency 16 – 48 kHz 16 – 48 kHz 16 – 48 kHz 16 – 192 kHz 16 – 192 kHz • This unit can show ID3 Tag Version 1.0/1.1/2.2/2.3/2.4 (for MP3). • The maximum number of characters: ––Tag : 30 characters ✎✎NOTE • WMA and AAC of which is covered with DRM cannot be played.
About this Unit ÑÑAV-IN Copyrights No picture appears on the screen. • Turn on the video component if it is not on. • Connect the video component correctly. • The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by JVC KENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners.
About this Unit • libFLAC Copyright (C) 2000-2009 Josh Coalson Copyright (C) 2011-2013 Xiph.Org Foundation Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: –– Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
About this Unit Specifications ÑÑMonitor section Picture Size : 6.75 inches (diagonal) wide : 151.8 mm (W) × 79.7 mm (H) Display System : Transparent TN LCD panel Drive System : TFT active matrix system Number of Pixels : 1,152,000 (800H x 480V x RGB) Effective Pixels : 99.99 % Pixel Arrangement : RGB striped arrangement Back Lighting : LED ÑÑUSB interface section USB Standard : USB 2.
About this Unit ÑÑAudio section Maximum Power (Front & Rear) : 50 W × 4 Full Bandwidth Power (Front & Rear) Full Bandwidth Power (at less than 1% THD) : 21 W × 4 Preout Level (V) : 2 V/ 10 kΩ Preout Impedance : ≤ 600 Ω Speaker Impedance :4–8Ω Equalizer : 7 Band Band Frequency: 62.5/ 160/ 400/ 1k/ 2.5k/ 6.
Declaration of Conformity with regard to the RE Directive 2014/53/EU Declaration of Conformity with regard to the RoHS Directive 2011/65/EU Manufacturer: JVC KENWOOD Corporation 3-12, Moriyacho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0022, JAPAN EU Representative: JVCKENWOOD Europe B.V. Amsterdamseweg 37, 1422 AC UITHOORN, THE NETHERLANDS !B5A-3197-00_KWM.
English Hereby, JVC KENWOOD declares that the radio equipment KW-M25BT is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: Français Par la présente, JVC KENWOOD déclare que l’équipement radio KW-M25BT est conforme à la directive 2014/53/UE.
!B5A-3197-00_KWM.