KW-M180BT MONITOR WITH RECEIVER Quick Start Guide MONITOR CON RECEPTOR Guía de inicio rápido • For detailed operations and information, refer to the INSTRUCTION MANUAL on the following website: • Para obtener información y detalles sobre las operaciones, consulte el MANUAL DE INSTRUCCIONES en el siguiente sitio web: Model name indication position See “Removing the trim plate” (P.13) Posición de la indicación del nombre del modelo Consulte “Retirada del marco” (P.
Contents Before use.................................................................................. 2 How to read this manual.................................................................................... 2 Precautions................................................................................................................. 2 Getting Started........................................................................ 3 Clock settings..................................................................
Getting Started 1 Turn the ignition key of your car to ACC. The unit is turned on, please read the warning and press “Agree” to enter the screen. 2 Press the < > button. 3 Touch [Settings]. [Guidelines SETUP] If you select [ON] for [Parking Guidelines], you can adjust the parking guidelines. [Reverse with ATT (-20dB)] When the gear is shifted to the reverse (R) position, the volume of the device is adjusted. Default is “ON”. See To adjust the Reverse with ATT (P.
Basics Basics Functions of the Buttons on the Front Panel HOME screen descriptions 1 Press the < > button. 1 2 3 HOME screen appears. 4 2 3 4 5 1 6 1 Remote Sensor • Receives the remote control signal. 2 (HOME) • Displays the HOME screen. (P.4) • Press and hold turns the power off. • When the power off, turns the power on. 3 EQ • Displays the Audio screen.* (P.10) * The Audio screen is not displayed during SETUP screen or on the list screen etc, 4 + , – (Volume) • Adjusts volume.
Tuner Tuner Tuner Basic Operation Tuner Setup 1 Press the < > button. 2 Touch [Tuner]. 1 Touch [ ]. 2 Set each item as follows. ÑÑSource control screen 1 2 3 1 Displays the information of the current station: PS name, Frequency, PTY Genre, Indicator Items 2 [FM] : Switches the FM band. “FM1”, “FM2”, “FM3” [AM] : Switches the AM band. “AM1”, “AM2” [E] [F] : Tunes in a station with good reception automatically. Touch and hold to switch to the next frequency manually.
USB USB ÑÑFor Video playback Preparation 1 When the operation buttons are not displayed ÑÑConnecting a USB device 1 Remove the cap of the USB terminal. 2 Connect the USB device with the USB cable. The unit reads the device and playback starts. 5 6 ÑÑTo disconnect the USB device 5 [ 1 Press the < > button. 2 Touch a source other than [USB]. 3 Detach the USB device. ÑÑUsable USB device This unit can play MPEG1/ MPEG2/ MPEG4/ H.
iPhone iPhone Preparation Playback operations ÑÑConnecting iPhone • For details about connecting iPhone, see page 15 . ÑÑControl the music you are listening to on the source control screen. 1 Remove the cap of the USB terminal. 2 Connect the iPhone. 1 ÑÑTo disconnect the iPhone 3 The unit reads the device and playback starts. 1 Press the < > button. 2 Touch a source other than [iPhone]. 3 Detach the iPhone. ÑÑConnectable iPhone The following models can be connected to this unit.
External Components External Components Using external audio/video players ÑÑStarting playback 1 Connect an external component to the AV-IN input terminal. (P.14) 2 Press the < > button. 3 Touch [AV-IN]. 4 Turn on the connected component and start playing the source. ÑÑFor Video playback 1 When the operation buttons are not displayed on the screen, touch the display. This function is available only when your vehicle is equipped with the electrical steering remote controller. 1 Press the < > button.
Bluetooth Bluetooth Register your smartphone to the unit You can use your Bluetooth smartphone when paired to this unit. 1 Turn on the Bluetooth function on your smartphone/cell-phone. 2 Search the unit (“KW-M180BT”) from your smartphone/cell-phone. If a PIN code is required, enter the PIN code (“0000”). • appears when the Bluetooth smartphone is connected. Make a phone call 1 Press the < > button. 2 Touch [Phone]. 3 See the table below for each operation method.
Controlling Audio Bluetooth Bluetooth Playing Bluetooth Audio Device You can adjust various settings such as audio balance or subwoofer level. 1 Press the < > button. 2 Touch [Bluetooth Audio]. 1 Press the button. 2 See the below for each operation method. ÑÑSource control screen 1 2 3 1 Displays the information of the current file. 2 Playing time/File number Play time bar : For confirmation of current playing position. 3 [ ] : Selects Random playback mode. [ ] : Selects Repeat playback mode.
Installation Installation Before Installation Before installation of this unit, please note the following precautions. #WARNINGS • If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box. • Do not cut out the fuse from the ignition wire (red) and the battery wire (yellow).
Installation Installation ÑÑSupplied accessories for installation 1 2 ÑÑJapanese cars (North America, South America sales area only) x1 x1 3 Installing the unit 6 or 7 4 (3 m) x1 Car Bracket x1 6 5 (M5 × 6 mm) x1 7 8 (M5 × 8 mm) x6 6 or 7 x6 ÑÑTrim plate (2 m) 1) Attach accessory 1 to the unit. x1 9 x1 ÑÑInstallation procedure 1) To prevent a short circuit, remove the key from the ignition and disconnect the ¤ terminal of the battery.
Installation Installation ÑÑMicrophone unit ÑÑRemoving the trim plate 1) Check the installation position of the microphone (accessory 3). 2) Clean the installation surface. 3) Remove the separator of the microphone (accessory 3), and stick the microphone to the place shown below. 4) Wire the microphone cable up to the unit with it secured at several positions using tape or other desired method. 5) Adjust the direction of the microphone (accessory 3) to the driver.
Installation Installation ÑÑConnecting wires to terminals Connect to vehicle’s steering remote harness. Contact your JVC dealer for details. REMOTE CONT STEERING WHEEL REMOTE INPUT Light Blue/Yellow (Steering remote control wire) To steering remote To use the steering wheel remote control feature, you need an exclusive remote adapter (not supplied) matched to your car.
Installation Installation ÑÑConnecting an iPhone/Android Android smartphone[2] USB cable M4x6 REAR OUT FRONT OUT [2] AV IN L R 1 3 5 7 2 4 6 8 1 3 5 7 2 4 6 8 iPhone[2] CAM IN VIDEO OUT VIDEO IN ANT Lightning-USB cable[2] Accessory 4 Accessory 5 Speaker impedance: 4-8 Ω USB terminal[1] (1.0 m) 5V=1.
About this Unit About this Unit ÑÑAcceptable Video files More information ÑÑUsable USB device This unit can play MPEG1/ MPEG2/ MPEG4/ H.264/ MKV/ MP3/WMA/ AAC/ WAV/ FLAC/ OGG files stored in a USB mass storage class device. • File system: FAT16/FAT32 /NTFS/ exFAT • This unit can recognize a total of 9,999 files and 320 folders (a maximum of 9,999 files per folder).
this Unit Unit About this Copyrights • The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by JVCKENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners. • Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Apple product(s) identified in the badge and has been certified by the developer to meet Apple performance standards.
Contenido Antes de la utilización.........................................................18 Cómo leer este manual.....................................................................................18 Precauciones............................................................................................................18 Inicio..........................................................................................19 Ajustes del reloj......................................................................
Inicio 1 Coloque la llave de encendido del coche en la posición ACC. La unidad se pone en marcha, Por favor, lea el aviso y pulse “Agree” para entrar en la pantalla. 2 Pulse el botón < 3 Toque [Settings]. 4 >. Toque la tecla correspondiente y establezca un valor. [Guidelines SETUP] Si selecciona [ON] para [Parking Guidelines], podrá ajustar las pautas de aparcamiento. [Inverso con ATT (-20dB)] Ajusta el volumen de la unidad cuando la marcha se desplaza a la posición de marcha atrás (R).
Conceptos básicosbásicos Conceptos Funciones de los botones del panel frontal Descripciones de la pantalla INICIO 1 Pulse el botón < >. 1 2 3 Aparece la pantalla HOME (inicio). 4 2 3 4 5 1 6 1 Sensor remoto • Recibe la señal del control remoto. 2 (HOME) • Muestra la pantalla INICIO. (P.20) • Presione y mantenga en segundo se apaga la alimentación. • Si la unidad está apagada, la enciende. 3 EQ • Muestra la pantalla Audio.* (P.
Tuner Tuner Manejo básico de tuner Configuración de tuner 1 Pulse el botón < 2 Toque [Tuner]. 1 Toque [ ]. 2 Ajuste cada elemento del modo siguiente. >. ÑÑPantalla de control de fuente 1 2 3 1 Muestra información sobre la emisora actual: Nombre PS, Frecuencia, Género PTY, Elementos del indicador 2 [FM] : Cambia a la banda FM. “FM1”, “FM2”, “FM3” [AM] : Cambia a la banda AM. “AM1”, “AM2” [E] [F] : Sintoniza automáticamente una emisora con buena recepción.
USB USB Preparativos ÑÑPara la reproducción de video 1 Si los botones de operación no se visualizan en ÑÑConexión de un dispositivo USB 1 Retire la tapa del terminal de USB. 2 Conecte el dispositivo USB con el cable USB. la pantalla, toque la pantalla. 5 6 La unidad lee el dispositivo y se inicia la reproducción. 5 [ ÑÑPara desconectar el dispositivo USB 1 Pulse el botón < > . 2 Toque una fuente distinta de [USB]. 3 Desconecte el dispositivo USB.
iPhone iPhone Preparativos Operaciones de reproducción ÑÑConexión de iPhone 1 2 • Para obtener detalles acerca de la conexión de un iPhone, consulte la página 31. Retire la tapa del terminal de USB. Conecte el iPhone. La unidad lee el dispositivo y se inicia la reproducción. ÑÑPara desconectar el iPhone 1 Pulse el botón < > . 2 Toque una fuente distinta de [iPhone]. 3 Desconecte el iPhone. ÑÑiPhone que pueden conectarse Los siguientes modelos pueden conectarse a esta unidad.
Componentes externos externos Componentes Uso de reproductores de audio/ vídeo exteriores Función de aprendizaje del mando a distancia de la dirección ÑÑInicio de la reproducción 1 Conecte un componente externo a la terminal de entrada AV-IN. (P.30) 2 Pulse el botón < > . 3 Toque [AV-IN]. 4 Enciende el componente conectado y comienza a reproducir la fuente. ÑÑPara la reproducción de video 1 Si los botones de operación no se visualizan en la pantalla, toque la pantalla. 1 Pulse el botón < >.
Bluetooth Bluetooth Registre su teléfono inteligente enla unidad Puede utilizar su teléfono inteligente Bluetooth cuando esté emparejado con esta unidad. 1 Active la función Bluetooth en su teléfono inteligente/teléfono móvil. 2 Busque la unidad (“KW-M180BT”) en su teléfono inteligente/teléfono móvil. Si se requiere un código PIN, introduzca el código PIN (“0000”). • aparece cuando el teléfono inteligente Bluetooth está conectado. Realice una llamada telefónica 1 Pulse el botón < > . 2 Toque [Phone].
Control del audio Bluetooth Bluetooth Reproducir dispositivos de audio Bluetooth Puede configurar diversos ajustes como el balance del audio o el nivel del subwoofer. 1 Pulse el botón . 2 Consulte lo siguiente para cada método de 1 Pulse el botón < > . 2 Toque [Bluetooth Audio]. funcionamiento. ÑÑPantalla de control de fuente 1 2 3 1 Muestra la información del archivo actual.
Instalación Instalación Antes de la instalación Antes de la instalación de esta unidad, tenga en cuenta las precauciones siguientes. #ADVERTENCIAS • Si conecta el cable de encendido (rojo) y el cable de la batería (amarillo) al chasis del automóvil (tierra), podría producir un cortocircuito y esto, a su vez, un incendio. Conecte siempre esos cables a la fuente de alimentación que pasa por la caja de fusibles. • No corte el fusible del cable de ignición (rojo) y el cable de la batería (amarillo).
Instalación Instalación ÑÑAccesorios suministrados para la instalación 1 ÑÑCoches japoneses (solo área de venta de Norteamérica y Sudamérica) 2 x1 x1 3 Instalación de la unidad 6o7 Soporte del vehículo 4 (3 m) x1 x1 6 5 6o7 (M5 × 6 mm) x1 7 8 (M5 × 8 mm) x6 x6 ÑÑPlaca de montaje 1) Conecte el accesorio 1 a la unidad. (2 m) x1 9 x1 ÑÑProcedimiento de instalación 1) Para evitar cortocircuitos, retire la llave del encendido y desconecte el terminal ¤ de la batería.
Instalación Instalación ÑÑUnidad de micrófono ÑÑRetirada del marco 1) Compruebe la posición de instalación del micrófono (accesorio 3). 2) Limpie la superficie de instalación. 3) Extraiga el separador del micrófono (accesorio 3) y fije el micrófono en la posición indicada más abajo. 4) Conecte el cable del micrófono a la unidad de forma segura en varias posiciones mediante cinta u otro método. 5) Ajuste la dirección del micrófono (accesorio 3) hacia el conductor.
Instalación Instalación ÑÑConectar los cables a los terminales REMOTE CONT STEERING WHEEL REMOTE INPUT Azul claro/Amarillo (cable del mando a distancia de la dirección) Al mando a distancia de la dirección Para utilizar la función de mando a distancia en el volante es necesario un adaptador remoto exclusivo (no suministrado) apropiado para su vehículo. Conecte al arnés remoto de la dirección del vehículo. Contacte con su distribuidor JVC para obtener más detalles.
Instalación Instalación ÑÑConexión de un iPhone/Android Teléfono inteligente Android[2] Cable USB[2] M4x6 REAR OUT FRONT OUT AV IN L R 1 3 5 7 2 4 6 8 1 3 5 7 2 4 6 8 iPhone[2] CAM IN VIDEO OUT VIDEO IN ANT Cable Lightning-USB[2] Accesorio 4 Accesorio 5 Impedancia del altavoz: 4-8 Ω Terminal USB[1] (1,0 m) 5V=1.
Acerca deunidad esta unidad Acerca de esta Más información ÑÑDispositivos USB que pueden utilizarse Esta unidad puede reproducir archivos MPEG1/ MPEG2/ MPEG4/H.264/MKV/ MP3/WMA/ AAC/ WAV/ FLAC/ OGG guardados en un dispositivo de almacenamiento masivo USB. • Sistema de archivo: FAT16 / FAT32 / NTFS / exFAT • Esta unidad puede reconocer un total de 9.999 archivos y 320 carpetas (un máximo de 9.999 archivos por carpeta).
de esta estaunidad unidad Acerca de Derechos de autor • La marca denominativa y los logos de Bluetooth® son marcas registradas propiedad de Bluetooth SIG, Inc. y cualquier uso de dichas marcas por JVCKENWOOD Corporation está sujeto a los términos de licencia. El resto de marcas comerciales y nombres comerciales corresponden a sus respectivos propietarios.
Acerca de de esta estaunidad unidad ÑÑFCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE • This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Acerca de de esta estaunidad unidad Supplier’s Declaration of Conformity Trade Name: JVC Products: MONITOR WITH RECEIVER Model Name: KW-M180BT Responsible Party: JVCKENWOOD USA CORPORATION 4001 Worsham Avenue, Long Beach, CA 90808, U.S.A. PHONE: 1-800-252-5722 THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.