KW-M180BT MONITOR WITH RECEIVER INSTRUCTION MANUAL • Updated information (the latest Instruction Manual, etc.) is available from . Model name indication position See “Removing the trim plate” (P.
Contents Before use.................................................................................. 2 How to read this manual.................................................................................... 2 Precautions................................................................................................................. 2 Getting Started........................................................................ 3 Clock settings..................................................................
Getting Started 1 Turn the ignition key of your car to ACC. The unit is turned on, please read the warning and press “Agree” to enter the screen. 2 Press the < > button. 3 Touch [Settings]. 4 Touch the corresponding key and set the value. [Guidelines SETUP] If you select [ON] for [Parking Guidelines], you can adjust the parking guidelines. See To adjust the parking guidelines (P.11) [Reverse with ATT (-20dB)] When the gear is shifted to the reverse (R) position, the volume of the device is adjusted.
Basics Basics Functions of the Buttons on the Front Panel ÑÑTurning off the power 1 Press and hold the < > button. 1 2 3 ÑÑAdjusting the volume 1 Press the <+> or <–> button. 4 5 6 1 Remote Sensor • Receives the remote control signal. 2 (HOME) • Displays the HOME screen. (P.5) • Press and hold turns the power off. • When the power off, turns the power on. 3 EQ • Displays the Audio screen.* (P.
Basics HOME screen descriptions 1 Press the < Source control screen 1 > button. 1 [ [ HOME screen appears. 2 3 ] : Returns to previous screen. ] : Displays the Audio screen. (P.15) 4 1 5 6 7 1 Clock display Touch to displays the Clock screen. 2 Switches to the Tuner broadcast. (P.6) 3 [USB] Plays files on a USB device. (P.7) [iPhone] Plays an iPhone. (P.8) • When iPhone is connected. [Mirroring] Displays the Mirroring screen. (P.
Tuner Tuner Tuner Basic Operation Tuner Setup 1 Press the < > button. 2 Touch [Tuner]. 1 Touch [ ]. 2 Set each item as follows. ÑÑSource control screen 1 2 3 1 Displays the information of the current station: PS name, Frequency, PTY Genre, Indicator Items 2 [FM] : Switches the FM band. “FM1”, “FM2”, “FM3” [AM] : Switches the AM band. “AM1”, “AM2” [E] [F] : Tunes in a station with good reception automatically. Touch and hold to switch to the next frequency manually.
USB ÑÑFor Video playback Preparation 1 When the operation buttons are not displayed ÑÑConnecting a USB device 1 Remove the cap of the USB terminal. 2 Connect the USB device with the USB cable. The unit reads the device and playback starts. 5 6 ÑÑTo disconnect the USB device: ] : You can adjust image quality in video screen. [Brightness] : Adjusts the brightness. (0 to 10) [Contrast] : Adjusts the contrast. (0 to 10) [Color] : Adjusts the color. (0 to 10) [Tint] : Adjusts the tint.
iPhone iPhone Preparation Playback operations ÑÑConnecting iPhone • For details about connecting iPhone, see page 21 . ÑÑControl the music you are listening to on the source control screen. 1 Remove the cap of the USB terminal. 2 Connect the iPhone. 1 ÑÑTo disconnect the iPhone 3 The unit reads the device and playback starts. 1 Press the < > button. 2 Touch a source other than [iPhone]. 3 Detach the iPhone. ÑÑConnectable iPhone The following models can be connected to this unit.
Mirroring Mirroring Preparation You can display and control the App on the unit while your smartphone is connected to the USB terminal. ✎✎NOTE • Pair your smartphone with the unit via Bluetooth. See Register your smartphone to the unit (P.12) and Connect the Bluetooth device. ÑÑCompatible Android smartphone • Android version 7.0 or later • Bluetooth support ✎✎NOTE • This unit may not work for some Android smartphone’s. ÑÑTo disconnect the Android smartphone 1 Press the < > button.
External Components External Components Using external audio/video players ÑÑStarting playback 1 Connect an external component to the AV-IN input terminal. (P.20) 2 Press the < > button. 3 Touch [AV-IN]. 4 Turn on the connected component and start playing the source. Rear view camera To use a rear view camera, the REVERSE lead connection is required. For connecting a rear view camera. (P.
External Components ÑÑTo adjust the parking guidelines ✎✎NOTE • Install the rear view camera in the appropriate position according to the instruction manual supplied with the rear view camera. • When adjusting the parking guidelines, make sure to apply the parking brake to prevent the car from moving. 1 Press the < > button. 2 Touch [Settings]. 3 Touch [System]. 4 Touch [T] or [U] of [Parking Guidelines] and set to [ON].
Bluetooth Bluetooth ÑÑAbout the Bluetooth smartphone and Bluetooth audio player This unit conforms to the following Bluetooth specifications: Version Bluetooth Ver.5.0 Profile Smartphone/ Cell-phone: HFP (V1.6) (Hands Free Profile) PBAP (Phonebook Access Profile) Audio player: A2DP (Advanced Audio Distribution Profile) AVRCP (V1.
Bluetooth Receive a phone call Make a phone call 1 Touch [Û]. 1 Press the < > button. 2 Touch [Phone]. 3 See the table below for each operation method. • [Ý] : Reject an incoming call. ÑÑOperations during a call Call by entering a phone number 1) Enter a phone number with number keys. 2) Touch [Û]. Make a call • Touch [ ] to delete the last entry. Call using call records [Ý] [ ] Ending a call Mute your voice You can send tones by touching desired keys on the screen. • Touch [6] to close the window.
Bluetooth Call by voice You can make a voice call using the voice recognition function of the Bluetooth smartphone. 1) Touch [ ]. 2) Say the name registered in the Bluetooth smartphone. • Touch [Cancel] to cancel voice dialing. Call Waiting When you receive a new call while talking on the phone: 1) Touch [ ] , the current call is put on hold and you can answer the newly received call. 2) Each time you touch [ ], the caller will change to the other one.
Controlling Audio Controlling Audio You can adjust various settings such as audio balance or subwoofer level. 1 Press the button. 2 See the below for each operation method. Equalizer Control 1 Press the button. 2 Touch [Equalizer]. 3 Set each item as follows. 4 1 2 Controlling General Audio 1 Press the button. 2 Touch [Fader / Balance]. 3 Set each item as follows. 3 1 You can select frequency bar and adjust its level. (-9 to +9) • The adjustments are stored.
Controlling Audio Speaker / X’over setup Listening Position DTA 1 Press the button. 2 Touch [Speaker / X’over]. 3 Touch the speaker to set up. 1 Press the button. 2 Touch [Position DTA]. 3 Touch [Delay]. 4 Touch [T] or [U] to adjust the delay time of the selected speaker. 4 Set each item as follows. Mode [OFF], [ON] [ON] : Filter adjustment. [OFF] : Turns off the filter. Slope [R] [S] Set a crossover slope. Frequence [R] [S] • High Pass Filter adjustment.
Remote control Remote control This unit can be operated using the remote control. The remote control RM-RK258 (optional accessory) can be used. WARNINGS • Do not ingest the battery, Chemical Burn Hazard The remote control supplied with this product contains a coin/button cell battery. If the coin/ button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children.
Installation Installation Before Installation Before installation of this unit, please note the following precautions. #WARNINGS • If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box. • Do not cut out the fuse from the ignition wire (red) and the battery wire (yellow).
Installation ÑÑSupplied accessories for installation 1 ÑÑMicrophone unit 2 x1 x1 3 4 x1 5 x1 6 (2 m) (3 m) x1 x1 7 1) Check the installation position of the microphone (accessory 6). 2) Clean the installation surface. 3) Remove the separator of the microphone (accessory 6), and stick the microphone to the place shown below. 4) Wire the microphone cable up to the unit with it secured at several positions using tape or other desired method.
Installation ÑÑConnecting wires to terminals REMOTE CONT STEERING WHEEL REMOTE INPUT Light Blue/Yellow (Steering remote control wire) Bright Green/Red To steering remote To use the steering wheel remote control feature, you need an exclusive remote adapter (not supplied) matched to your car. ST REMOTE INPUT 1 Purple/Red ST REMOTE INPUT 2 Gray/Red ST REMOTE GND Connect to vehicle’s steering remote harness. Contact your JVC dealer for details.
Installation ÑÑConnecting an iPhone/Android Android smartphone[2] USB cable M4x6 REAR OUT FRONT OUT [2] AV IN L R 1 3 5 7 2 4 6 8 1 3 5 7 2 4 6 8 iPhone[2] CAM IN VIDEO OUT VIDEO IN ANT Lightning-USB cable[2] Accessory 3 Accessory 4 Speaker impedance: 4-8 Ω USB terminal[1] (1.0 m) 5V=1.
About this Unit About this Unit ÑÑAcceptable Video files More information ÑÑUsable USB device This unit can play MPEG1/ MPEG2/ MPEG4/ H.264/ MKV/ MP3/WMA/ AAC/ WAV/ FLAC/ OGG files stored in a USB mass storage class device. • File system: FAT16/FAT32 /NTFS/ exFAT • This unit can recognize a total of 9,999 files and 320 folders (a maximum of 9,999 files per folder).
About this Unit Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. • For operations with the external components, refer also to the instructions supplied with the adapters used for the connections (as well as the instructions supplied with the external components). ÑÑGeneral No sound comes out of the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. The unit does not work at all.
About this Unit Specifications ÑÑMonitor section Picture Size : 6.75 inches (diagonal) wide : 151.8 mm (W) × 79.7 mm (H) 5-15/16 × 3-1/8 inch Display System : Transparent TN LCD panel Drive System : TFT active matrix system Number of Pixels : 1,152,000 (800H x 480V x RGB) Effective Pixels : 99.99 % Pixel Arrangement : RGB striped arrangement Back Lighting : LED ÑÑUSB interface section USB Standard : USB 2.
About this Unit ÑÑAudio section Maximum Power (Front & Rear) : 45 W × 4 Full Bandwidth Power (Front & Rear) Full Bandwidth Power (at less than 1% THD) : 16 W × 4 Preout Level (V) : 2 V/ 10 kΩ Preout Impedance : 1.4 kΩ Speaker Impedance :4–8Ω ÑÑDSP section Equalizer : 13 Band Band Frequency: 62.5/100/160/250/400/630/1k/1.6k/2.5k/ 4k/6.3k/10k/16k Hz Level: -9 – +9 dB HPF Frequency: Through / 30/40/50/60/70/80/90/100/ 120/150/180/220/250 Hz Slope: -6/-12/-18/-24 dB/Oct.
About this Unit Copyrights • The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by JVCKENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners. • Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Apple product(s) identified in the badge and has been certified by the developer to meet Apple performance standards.
About this Unit For Turkey Bu ürün 28300 sayılı Resmi Gazete’de yayımlanan Atik Elektrikli ve Elektronik Eşyalarin Kontrolü Yönetmeliğe uygun olarak üretilmiştir. Declaration of Conformity with regard to the RE Directive 2014/53/EU Declaration of Conformity with regard to the RoHS Directive 2011/65/EU Manufacturer: JVCKENWOOD Corporation 3-12, Moriyacho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0022, JAPAN EU Representative: JVCKENWOOD Europe B.V.
