KW-M180BT MONITOR WITH RECEIVER INSTRUCTION MANUAL • Updated information (the latest Instruction Manual, etc.) is available from . Model name indication position See “Removing the trim plate” (P.
Contents Before use ................................................................................. 2 How to read this manual ................................................................................... 2 Precautions ................................................................................................................ 2 Getting Started ....................................................................... 3 Clock settings .................................................................
Getting Started 1 Turn the ignition key of your car to ACC. The unit is turned on, please read the warning and press “Agree” to enter the screen. 2 Press the < > button. 3 Touch [Setting]. [Guidelines SETUP] If you select [ON] for [Parking Guidelines], you can adjust the parking guidelines. See To adjust the parking guidelines (P.11). [Reverse with ATT (-20dB)] When the gear is shifted to the reverse (R) position, the volume of the device is adjusted. Default is “ON”.
Basics Basics Functions of the Buttons on the Front Panel Ñ Turning off the power 1 Press and hold the < > button. 1 2 3 Ñ Adjusting the volume 1 Press the <+> or <–> button. 4 5 6 1 Remote Sensor • Receives the remote control signal. 2 (HOME) • Displays the HOME screen. (P.5) • Press and hold turns the power off. • When the power off, turns the power on. 3 EQ • Displays the Audio screen.* (P.
Basics HOME screen descriptions 1 Press the < Source control screen 1 > button. 1 [ [ ] : Returns to previous screen. ] : Displays the Audio screen. (P.14) HOME screen appears. 2 3 4 1 5 6 7 1 Clock display Touch to displays the Clock screen. 2 Switches to the Tuner broadcast. (P.6) 3 [USB] Plays files on a USB device. (P.7) [iPhone] Plays an iPhone. (P.8) • When iPhone is connected. [Mirroring] Displays the Mirroring screen. (P.
Tuner Tuner Tuner Basic Operation Tuner Setup 1 Press the < > button. 2 Touch [Tuner]. ]. 1 Touch [ 2 Set each item as follows. Ñ Source control screen 1 2 3 1 Displays the information of the current station: PS name, Frequency, PTY Genre, Indicator Items 2 [FM] : Switches the FM band. “FM1”, “FM2”, “FM3” [AM] : Switches the AM band. “AM1”, “AM2” [E] [F] : Tunes in a station with good reception automatically. [ ] : Displays the Tuner Setup screen. (P.6) 3 Recalls the memorized station.
USB Ñ For Video playback Preparation 1 When the operation buttons are not displayed Ñ Connecting a USB device on the screen, touch the display. 1 Remove the cap of the USB terminal. 2 Connect the USB device with the USB cable. 6 The unit reads the device and playback starts. 5 [ Ñ To disconnect the USB device: 1 Press the < > button. 2 Touch a source other than [USB]. 3 Detach the USB device. Ñ Usable USB device This unit can play MPEG1/ MPEG2/ MPEG4/ H.263/ H.264/H.
iPhone iPhone Preparation Playback operations Ñ Connecting iPhone • For Lightning connector models: Use USB Audio cable for iPhone—KS-U62 (optional accessory). • For details about connecting iPhone, see page 21 . 1 Remove the cap of the USB terminal. 2 Connect the iPhone. The unit reads the device and playback starts. Ñ To disconnect the iPhone Ñ Connectable iPhone The following models can be connected to this unit.
Mirroring Mirroring Preparation You can display and control the App on the unit while your smartphone is connected to the USB terminal. ✎ NOTE Ñ To disconnect the Android smartphone 1 Press the < > button. 2 Touch a source other than [Mirroring]. 3 Detach the Android smartphone. • Pair your smartphone with the unit via Bluetooth. See Register your smartphone to the unit (P.11) and Connect the Bluetooth device. Ñ Mirroring Operation Ñ Compatible Android smartphone 1 Touch [Mirroring].
External Components External Components Using external audio/video players Ñ To adjust the parking guidelines ✎ NOTE Ñ Starting playback 1 Connect an external component to the AV-IN input terminal. (P.20) 2 Press the < > button. 3 Touch [AV-IN]. 4 Turn on the connected component and start playing the source. Ñ For Video playback 1 When the operation buttons are not displayed on the screen, touch the display.
Bluetooth Bluetooth Ñ About the Bluetooth smartphone and Bluetooth audio player This unit conforms to the following Bluetooth specifications: Version Bluetooth Ver.5.0 Profile Smartphone/ Cell-phone: HFP (V1.6) (Hands Free Profile) PBAP (Phonebook Access Profile) Audio player: A2DP (Advanced Audio Distribution Profile) AVRCP (V1.5) (Audio/Video Remote Control Profile) The Bluetooth device name of this unit is displayed. [Pin Code] Displays the PIN code. [Device address] Displays the device address.
Bluetooth Receive a phone call Make a phone call 1 Touch [Û]. 1 Press the < > button. 2 Touch [Phone]. 3 See the table below for each operation method. • [Ý] : Reject an incoming call. Ñ Operations during a call Call by entering a phone number 1) Enter a phone number with number keys. 2) Touch [Û]. Make a call • Touch [ ] to delete the last entry. Call using call records [Ý] [ ] Ending a call Mute your voice You can send tones by touching desired keys on the screen. • Touch [6] to close the window.
Bluetooth Call by voice You can make a voice call using the voice recognition function of the Bluetooth smartphone. 1) Touch [ ]. 2) Say the name registered in t he Bluetooth smartphone. 1 Displays the information of the current file. 2 Playing time/File number Play time bar : For confirmation of current playing position. • Touch [Cancel] to cancel voice dialing.
Controlling Controlling Audio Audio You can adjust various settings such as audio balance or subwoofer level. 1 Press the button. 2 See the below for each operation method. Equalizer Control 1 Press the button. 2 Touch [Equalizer]. 3 Set each item as follows. 4 1 2 Controlling General Audio 1 Press the button. 2 Touch [Fader / Balance]. 3 Set each item as follows. 4 Initialize the current EQ curve. [Fader Balance] Adjust the left and right volume Balance balance.
Controlling Audio Speaker / X’Over setup Listening Position / DTA 1 Press the button. 2 Touch [Speaker / X’Over]. 3 Touch the speaker to set up. 1 Press the button. 2 Touch [Position / DTA]. 3 Touch [Delay]. 4 Touch [T] or [U] to adjust the delay time of the selected speaker. 4 Set each item as follows. Mode [OFF], [ON] [ON] : Filter adjustment. [OFF] : Turns off the filter. Slope [R] [S] Set a crossover slope. Frequence [R] [S] • High Pass Filter adjustment.
Remote control This unit can be operated using the remote control. The remote control RM-RK258 (optional accessory) can be used. Functions of the Remote control Buttons • Aim the remote control directly at the remote sensor on the faceplate. • DO NOT expose the remote sensor to bright light (direct sunlight or artificial lighting). SRC Switches to the source to be played. VOL + – Adjusts the volume. ATT Mutes/restores the sound DISP Not used. FM/R AM/S E 2 F 3 Selects the folder to be played.
Installation Installation Before Installation Before installation of this unit, please note the following precautions. #WARNINGS • If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box. • Do not cut out the fuse from the ignition wire (red) and the battery wire (yellow).
Installation Ñ Supplied accessories for installation 1 Installing the unit 2 Ñ Non-Japanese cars x2 x1 3 4 (3 m) x1 x1 6 5 x1 x1 8 7 (M5 × 6 mm) 9 Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. x6 (M5 × 8 mm) x6 (2 m) x1 Ñ Installation procedure 1) To prevent a short circuit, remove the key from the ignition and disconnect the ¤ terminal of the battery. 2) Make the proper input and output wire connections for each unit.
Installation Ñ Microphone unit Ñ Removing the unit 1) Check the installation position of the microphone (accessory 4). 2) Clean the installation surface. 3) Remove the separator of the microphone (accessory 4), and stick the microphone to the place shown below. 4) Wire the microphone cable up to the unit with it secured at several positions using tape or other desired method. 5) Adjust the direction of the microphone (accessory 4) to the driver.
Installation Ñ Connecting wires to terminals REMOTE CONT STEERING WHEEL REMOTE INPUT Light Blue/Yellow (Steering remote control wire) To steering remote To use the steering wheel remote control feature, you need an exclusive remote adapter (not supplied) matched to your car. Connect to the vehicle’s parking brake detection switch harness.
Installation Ñ Connecting an iPhone/Android Android smartphone[2] Micro USB to USB cable M4x6 REAR OUT FRONT OUT [2] AV IN L R 1 3 5 7 2 4 6 8 iPhone[2] Lightning connector 1 3 5 7 2 4 6 8 CAM IN VIDEO OUT VIDEO IN ANT KS-U62 (0.8m)[3] Accessory 5 Accessory 6 Speaker impedance: 4-8 Ω USB terminal[1] (0.8 m) 5V=1.
About this Unit About this Unit Ñ Acceptable Video files More information Ñ Usable USB device This unit can play MPEG1/ MPEG2/ MPEG4/ H.263/ H.264/H.265/MKV/ MP3/WMA/ AAC/ WAV/ FLAC/ OGG/APE files stored in a USB mass storage class device. File system: FAT32 /NTFS/ exFAT ✎ NOTE • When the USB device is connected to this unit, it can be charged through the USB cable. • Install the USB device in the place where it will not affect safe driving.
About this Unit Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. • For operations with the external components, refer also to the instructions supplied with the adapters used for the connections (as well as the instructions supplied with the external components). Ñ General No sound comes out of the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. The unit does not work at all.
About this Unit Copyrights • The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by JVC KENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners. • Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Apple product(s) identified in the badge, and has been certified by the developer to meet Apple performance standards.
About this Unit Specifications Ñ Monitor section Picture Size : 6.75 inches (diagonal) wide : 151.8 mm (W) × 79.7 mm (H) 5-15/16 × 3-1/8 inch Display System : Transparent TN LCD panel Drive System : TFT active matrix system Number of Pixels : 1,152,000 (800H x 480V x RGB) Effective Pixels : 99.99 % Pixel Arrangement : RGB striped arrangement Back Lighting : LED Ñ USB interface section USB Standard : USB 2.
About this Unit Ñ Audio section Maximum Power (Front & Rear) : 45 W × 4 Full Bandwidth Power (Front & Rear) Full Bandwidth Power (at less than 1% THD) : 16 W × 4 Preout Level (V) : 2 V/ 10 kΩ Preout Impedance : 1.4 kΩ Speaker Impedance :4–8Ω Equalizer : 13 Band Band Frequency: 62.5/100/160/250/400/630/1k/1.6k/2.5k/ 4k/6.3k/10k/16k Hz Level: -9 – +9 HPF Frequency: Through / 30/40/50/60/70/80/90/100/ 120/150/180/220/250 Hz / Slope: -6/-12/-18/-24 dB/Oct.
About this Unit This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. For Canada Ñ IC (Industry Canada) Notice This device contains licence-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).