KW-M150BT MONITOR WITH RECEIVER INSTRUCTION MANUAL • Updated information (the latest Instruction Manual, etc.) is available from . Model name indication position See “Removing the trim plate” (P.23) Trim plate © 2019 JVC KENWOOD Corporation 19KWM_K_Ref_1En.
Contents Before use.................................................................................. 2 How to read this manual.................................................................................... 2 Precautions................................................................................................................. 2 Getting Started........................................................................ 3 Clock settings..................................................................
Getting Started 1 Turn the ignition key of your car to ACC. The unit is turned on. 2 Press the < > button. 3 Touch [Setting]. [Screen] [Dimmer] Select the dimmer mode. “High” (Default) / “Mid” / “Low” [Demo] Select the demonstration mode. Default is “ON”. [Information] Displays the software version of this unit. 5 Touch [6]. Clock settings 4 Touch the corresponding key and set the value. ÑÑSynchronizing the clock time with FM RDS Activate [RDS Clock Sync]. See Tuner Setup (P.7).
Basics Basics Functions of the Buttons on the Front Panel ÑÑTurning off the power 1 Press and hold the < > button. 1 2 3 ÑÑAdjusting the volume 1 Press the <+> or <–> button. 4 5 6 1 Remote Sensor • Receives the remote control signal. 2 (HOME) • Displays the HOME screen. (P.5) • Pressing for 1 second turns the power off. • When the power off, turns the power on. 3 EQ • Displays the Audio screen.* (P.
Basics HOME screen descriptions 1 Press the < List screen There are some common function keys in the list screens of most sources. > button. HOME screen appears. 2 3 4 1 5 1 You can change the page to display more items 6 7 by pressing [R]/ [S]. 1 Clock display Touch to displays the Clock screen. 2 Switches to the Tuner broadcast. (P.6) 3 [USB] Plays files on a USB device. (P.8) [iPod] Plays an iPod/iPhone. (P.10) • When iPod/iPhone is connected. [Mirroring] Displays the Mirroring screen. (P.
Tuner Tuner Tuner Basic Operation Presetting stations 1 Press the < > button. 2 Touch [Tuner]. ÑÑAuto memory You can preset 6 stations for the current band (FM1/ FM2/FM3/AM1/AM2). ÑÑSource control screen 4 1 2 The local stations with the strongest signals are found and stored automatically. ÑÑManual memory You can store the current receiving station in memory. 3 1 Displays the information of the current station: PS name, Frequency, PTY Genre, Indicator Items 2 [FM] : Switches the FM band.
Tuner Tuner Setup 1 Touch [ ]. 2 Set each item as follows. [PTY] Select a program type. [PTY Seek] Searches for a program by program type. *1 To use the function, it is necessary to set [Area] to [N.America]/[S.America]. *2 To use the function, it is necessary to set [Area] to [Europe]. *3 FM only 3 Touch [6]. [Auto Store] Automatically searches and stores the 6 stations with the strongest signals for the selected band. “Auto Store” appears. [Area] “N.
USB USB Preparation ÑÑConnecting a USB device 1 Remove the cap of the USB terminal. 2 Connect the USB device with the USB cable. Playback operations ÑÑControl the music you are listening to on the source control screen. 5 1 2 3 The unit reads the device and playback starts. ÑÑTo disconnect the USB device: 1 Press the < > button. 2 Touch a source other than [USB]. 3 Detach the USB device. ÑÑUsable USB device This unit can play MPEG1/ MPEG2/ MPEG4/ H.
USB ÑÑFor Video playback ÑÑSelecting a track in a list (Searches file) 1 When the operation buttons are not displayed 1 Touch [1]. 2 Select whether you search by audio files [ on the screen, touch the display. 4 1 video files [ ], ]. 2 3 ] : You can adjust image quality in video screen. [Brightness] : Adjusts the brightness. (00 to 10) [Contrast] : Adjusts the contrast. (00 to 10) [Color] : Adjusts the color. (00 to 10) [Tint] : Adjusts the tint. (00 to 10) [INITIALIZE] : To clear the adjustment.
iPod/iPhone iPod/iPhone Preparation ÑÑConnecting iPod/iPhone • For Lightning connector models: Use USB Audio cable for iPod/iPhone—KS-U62 (optional accessory). • For details about connecting iPod/iPhone, see page 25 . 1 Remove the cap of the USB terminal. 2 Connect the iPod/iPhone. The unit reads the device and playback starts. ÑÑTo disconnect the iPod/iPhone 1 Press the < > button. 2 Touch a source other than [iPod]. 3 Detach the iPod/iPhone.
iPod/iPhone ÑÑSelecting a content in a list 1 Touch [1]. 2 Touch desired item. When you touch a category its contents are displayed. 3 Touch desired item from the content list. Playback starts. • Touch [6] to moves to the upper hierarchy. ✎✎NOTE • The source control screen appears when you touch [6] at the top hierarchy. English | 11 Continued on the next page... 19KWM_K_Ref_1En.
Mirroring Mirroring Preparation You can display and control the App on the unit while your smartphone is connected to the USB terminal. ✎✎NOTE Mirroring operations ÑÑMirroring Operation 1 Touch [Mirroring]. • Pair your smartphone with the unit via Bluetooth. See Register your smartphone to the unit (P.15) and Connect the Bluetooth device. ÑÑCompatible Android smartphone • Android version 7.0 or later • Bluetooth support ✎✎NOTE • This unit may not work for some Android smartphone’s.
External Components External Components Using external audio/video players ÑÑStarting playback 1 Connect an external component to the AV-IN input terminal. (P.24) 2 Press the < > button. 3 Touch [AV-IN]. 4 Turn on the connected component and start Rear view camera To use a rear view camera, the REVERSE lead connection is required. For connecting a rear view camera. (P.
External Components ÑÑTo adjust the parking guidelines ✎✎NOTE • Install the rear view camera in the appropriate position according to the instruction manual supplied with the rear view camera. • When adjusting the parking guidelines, make sure to apply the parking brake to prevent the car from moving. 1 Press the < > button. 2 Touch [Setting]. 3 Touch [System]. 4 Touch [T] or [U] of [Parking Guidelines] and set to [ON].
Bluetooth Bluetooth ÑÑAbout the Bluetooth smartphone and Bluetooth audio player This unit conforms to the following Bluetooth specifications: Version Bluetooth Ver.4.2 Profile Smartphone/ Cell-phone: HFP (V1.6) (Hands Free Profile) PBAP (Phonebook Access Profile) Audio player: A2DP (Advanced Audio Distribution Profile) AVRCP (V1.
Bluetooth Receive a phone call Make a phone call 1 Touch [Û]. 1 Press the < > button. 2 Touch [Phone]. 3 See the table below for each operation method. • [Ý] : Reject an incoming call. ÑÑOperations during a call Call by entering a phone number 1) Enter a phone number with number keys. 2) Touch [Û]. Make a call • Touch [ ] to delete the last entry. [Ý] Ending a call You can send tones by touching desired keys on the screen. • Touch [6] to close the window.
Bluetooth Call by voice You can make a voice call using the voice recognition function of the Bluetooth smartphone. 1) Touch [ ]. 2) Say the name registered in the Bluetooth smartphone. ✎✎NOTE • Operations and display indications may differ according to their availability on the connected device. * You can access the voice recognition function of the Bluetooth smartphone connected to this unit. (The functionality depends on the Bluetooth smartphone.) ÑÑSelecting a content in a list 1 Touch [1].
Controlling Controlling Audio Audio You can adjust various settings such as audio balance or subwoofer level. 1 Press the button. 2 See the below for each operation method. Equalizer Control 1 Press the button. 2 Touch [Equalizer]. 3 Set each item as follows. 4 1 2 Controlling General Audio 1 Press the button. 2 Touch [Fader / Balance]. 3 Set each item as follows. 3 1 You can select frequency bar and adjust its level. (-9 to +9) • The adjustments are stored.
Controlling Audio Speaker / X’Over setup Listening Position / DTA 1 Press the button. 2 Touch [Speaker / X’Over]. 3 Touch the speaker to set up. 1 Press the button. 2 Touch [Position / DTA]. 3 Touch [Delay]. 4 Touch [T] or [U] to adjust the delay time of the selected speaker. 4 Set each item as follows. Mode [OFF], [ON] [ON] : Filter adjustment. [OFF] : Turns off the filter. Slope [R] [S] Set a crossover slope. Frequence [R] [S] • High Pass Filter adjustment.
Remote control This unit can be operated using the remote control. The remote control RM-RK258 (optional accessory) can be used. Functions of the Remote control Buttons • Aim the remote control directly at the remote sensor on the faceplate. • DO NOT expose the remote sensor to bright light (direct sunlight or artificial lighting). SRC Switches to the source to be played. VOL + – Adjusts the volume. ATT Mutes/restores the sound DISP Not used. FM/R AM/S E 2 F 3 Selects the folder to be played.
Installation Installation Before Installation Before installation of this unit, please note the following precautions. #WARNINGS • If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box. • Do not cut out the fuse from the ignition wire (red) and the battery wire (yellow).
Installation ÑÑSupplied accessories for installation 1 ÑÑNon-Japanese cars x2 x1 4 3 (3 m) x1 x1 6 5 x1 7 Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. x1 8 (M5 × 6 mm) 9 Installing the unit 2 x6 (M5 × 8 mm) x6 (2 m) x1 ÑÑInstallation procedure 1) To prevent a short circuit, remove the key from the ignition and disconnect the ¤ terminal of the battery. 2) Make the proper input and output wire connections for each unit.
Installation ÑÑMicrophone unit ÑÑRemoving the unit 1) Check the installation position of the microphone (accessory 4). 2) Clean the installation surface. 3) Remove the separator of the microphone (accessory 4), and stick the microphone to the place shown below. 4) Wire the microphone cable up to the unit with it secured at several positions using tape or other desired method. 5) Adjust the direction of the microphone (accessory 4) to the driver.
Installation ÑÑConnecting wires to terminals REMOTE CONT STEERING WHEEL REMOTE INPUT Light Blue/Yellow (Steering remote control wire) Bright Green/Red ST REMOTE INPUT 1 To steering remote To use the steering wheel remote control feature, you need an exclusive remote adapter (not supplied) matched to your car. ST REMOTE INPUT 2 ST REMOTE GND Connect to the vehicle’s parking brake detection switch harness.
Installation ÑÑConnecting an iPod/iPhone/Android Android smartphone[2] Micro USB to USB cable[2] M4x6 REAR OUT FRONT OUT AV IN L R 1 3 5 7 2 4 6 8 iPod/iPhone[2] Lightning connector 1 3 5 7 2 4 6 8 CAM IN VIDEO OUT VIDEO IN ANT KS-U62 (0.8m)[3] Accessory 5 Accessory 6 Speaker impedance: 4-8 Ω USB terminal[1] (0.8 m) 5V=1.
About this Unit About this Unit More information Troubleshooting ÑÑPlayable Audio files Audio format Bit rate/ (Bit count) MP3 (.mp3) 16 – 320kbps, VBR WMA (.wma) 16 – 320kbps AAC-LC (.m4a, .aac) 16 – 320kbps Linear PCM (WAVE) (16/24 bit) (.wav) FLAC (.flac) (16/24 bit) Vorbis (.ogg) (16/24 bit) Sampling frequency 16 – 48 kHz 16 – 48 kHz 16 – 48 kHz 8 – 192 kHz 8 – 192 kHz 8 – 192 kHz • This unit can show ID3 Tag Version 1.0/1.1/2.2/2.3/2.4 (for MP3).
About this Unit ÑÑAV-IN No picture appears on the screen. • Turn on the video component if it is not on. • Connect the video component correctly. ÑÑBluetooth Phone sound quality is poor. • Reduce the distance between the unit and the Bluetooth mobile phone. • Move the car to a place where you can get a better signal reception. The sound is interrupted or skipped while using a Bluetooth audio player. • Reduce the distance between the unit and the Bluetooth audio player. • Turn off, then turn on the unit.
About this Unit –– Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
About this Unit ÑÑBluetooth section ÑÑAudio section Technology : Bluetooth Ver.4.2 Frequency : 2.402 – 2.480 GHz Output Power : +8 dBm (AVE), Power Class1 Maximum Communication range : Line of sight approx. 10m (32.8 ft) Audio Codec : SBC Profile (Multi Profile support) • HFP (V1.6) (Hands Free Profile) • A2DP (Advanced Audio Distribution Profile) • AVRCP (V1.
About this Unit For USA ÑÑFCC WARNING This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. NOTE • This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
About this Unit For Argentina ÑÑInformación acerca de la eliminación de equipos eléctricos y electrónicos al final de la vida útil (aplicable a los países que hayan adoptado sistemas independientes de recogida de residuos) Los productos con el símbolo de un contenedor con ruedas tachado no podrán ser desechados como residuos domésticos.
19KWM_K_Ref_1En.