SIRIUS® Radio KT-SR2000 INSTRUCTIONS For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear, bottom or side of the cabinet. Retain this information for future reference. Model No. Serial No. LVT1261-001A [J] KT-SR2000_Cover.p65 3 04.7.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ CONGRATULATIONS! Your new JVC SIRIUS® Radio KT-SR2000, called “JVC Plug-In–Play (PnP),” lets you enjoy SIRIUS Satellite Radio’s digital entertainment streams anywhere you’ve installed either KS-K6012 Car Docking Kit or KS-K6013 Home Docking Kit (sold separately). Use this manual to familiarize yourself with all of JVC PnP’s features and capabilities.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ Safety Precautions WARNINGS: Take the following precautions to prevent traffic accidents and avoid personal injury: • Installation must be performed according to this instruction manual. JVC is not responsible for issues arising from installations not performed according to the procedures in this manual. • Do not install the unit where it may obstruct your view through the windshield or of your vehicle’s indicator displays.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ Box Contents • Do not recharge, short, disassemble, or heat the battery or dispose of it in a fire. Doing any of these things may cause the battery to give off heat, crack, or start a fire. • Do not leave the battery with other metallic materials. Doing this may cause the battery to give off heat, crack, or start a fire.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ Installation: Preparation To use your JVC PnP in your car or at home, it is required to separately purchase either KS-K6012 Car Docking Kit or KS-K6013 Home Docking Kit. KS-K6012 includes... • Installations • Car Docking Cradle • Suction Cup Mount • Cigarette Lighter Adapter • Magnetic Roof-mount SIRIUS Antenna KS-K6013 includes...
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ Installation in Your Car with KS-K6012 CAUTION: Do not plug the cigarette lighter adapter into the cigarette lighter until you have completed the installation. 2 Installing in your car For more illustrated explanations, refer to the Installations supplied for your Car Docking Kit. 1 Determine where you want to mount JVC PnP.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ Installation in Your Car with KS-K6012 (continued) 3 Plug the cigarette lighter adapter into the back of the cradle—DC 12 V. Finding the Best Antenna Mounting Location 4 Activate the FM signal transmitter and preset the frequency (see “4 FM Transmitter Options” on page 24). • It is recommended to preset the same frequency into your car stereo as you have selected so you can easily tune in to the frequency.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ 5 6 Slide the locking knob into lock position on the back of the cradle. Press the JVC PnP. (POWER) button to turn on your • If your JVC PnP has been properly connected and the antenna is receiving the SIRIUS signal, you will hear audio. • If your JVC PnP has not been properly connected, “Antenna Error” will appear on the display of your JVC PnP. Re-orient the antenna until you hear audio (see “8 Antenna Aiming” on page 27).
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ Installation in Your Car with KS-K6012 (continued) 5 6 Route the cable from the antenna into the trunk by tucking it underneath the rubber molding around rear window. • Route the cable from the lowest point of the rear window. Take advantage of any existing cable channels or wiring conduits.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ Installation in a Home with KS-K6013 Installation in a Home SIRIUS Satellite map For more illustrated explanations, refer to the Installations supplied for your Home Docking Kit. Due to the paths of SIRIUS satellites over the US, the best location for the antenna in your home depends on where you live. Use the map below as a general placement guideline. Area 1 : Place the antenna at an EAST-facing window.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ JVC PnP’s Controls and Features SIRIUS® Radio Remote controller MUTE POWER 2 56 q CH + 1 CAT - SELECT CAT + CH - 3 5 5 CH 2 CAT 2 CAT3 4 ∞ 7 3 DISP MEMO BAND MENU S-SEEK 1 9 8 1 2 3 4 5 6 7 8 DIRECT 3 2 9 4 MENU 6 CH P.T un E MEMO DISP SEL 4 BAND p 8 7 9 PREV 0 w 6 5 e ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ 12 KT-SR2000_02-14.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ 1 Main display 2 (POWER) Turns on and off the power. 3 MEMO (memory) (S-SEEK) Stores and recalls the Artist/Song Title information. 4 BAND (P.TUNE) Selects the 3 bands of stream presets; enters and exits from the Preset Tuning Mode. 5 CH (channel) 5 / ∞ (CH + / –), CAT (category) 2 / 3 (CAT – / +) Navigate through streams, categories, and Menu screens. 6 SEL (SELECT) • On the menu and stream list screens: Selects an item highlighted.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ Activating your SIRIUS Subscription Before you can listen to JVC PnP, you must subscribe to SIRIUS Satellite Radio’s service. 1. Make sure that JVC PnP is properly connected and that its antenna is oriented to receive the SIRIUS satellite signal (see Installation sections for details). 2. Press (POWER) to turn on your JVC PnP. After displaying the SIRIUS logo, JVC PnP updates all Sirius channels.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ Basic Operation After you have successfully activated your SIRIUS subscription, the Normal Operation screen will appear: Press CH 5 / ∞ (or CH + / – on the remote controller) to select streams. • The selected stream will automatically play, and the name and artist of the currently playing song will scroll across the display. If you want to listen to a different entertainment category... 1.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ Selecting Music by Artist (Artist List) Selecting Music Selecting Music by Stream (Stream List) 1. Press and hold DISP (display) for about 2 seconds while in the Normal Operation mode. • To cancel the operation, press and hold DISP (display) again. 1. Press and hold DISP (display) for about 2 seconds while in the Normal Operation mode. The Stream List screen (below) appears, showing all available streams regardless of category.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ Selecting Music by Song Title (Song Title List) 1. Press and hold DISP (display) for about 2 seconds while in the Normal Operation mode. • To cancel the operation, press and hold DISP (display) again. Direct Tuning Streams can also be directly accessed. 1. Press DIRECT on the remote controller. 2. Press DISP (display) twice again. The Song Title List screen (below) appears, showing all currently playing songs regardless of category. 3.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ 3. Hold the number keys 1 – 6 you want to store the stream in for about 2 seconds. The selected preset number flashes and then remain lit on the display to show that it has been memorized. • If the preset button already has a stream stored in it, it will be replaced with the new stream. Searching for a Preset Stream You can search for a preset stream using the list. 1. Press and hold BAND while in the Normal Operation mode.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ 3. Press DISP (display) repeatedly until the desired Preset Stream List screen appears. • Each time you press the button, the Preset lists changes from “Stream List”, “Artist List,” then “Song Title List.” Enlarging the Indications—Display Button You can enlarge the artist name and song title shown on the Normal Operation screen or the Preset Tuning Mode screen. • This feature is useful when viewing the display at a distance. Press DISP (display).
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ S-Seek Function—Memory Button You can store the current Program Definition Text (PDT: Artist Name and Song title) with a total of 20 Artist/Song Title combinations, then by using the stored information, you can make your JVC PnP search the current incoming Sirius signal and alert you when a saved song is being played—S-Seek function. To store the information If you have already stored the same PDT...
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ Press CH 5 / ∞ (or CH + / –) to select unnecessary information (PDT), then press SEL (or SELECT). It will be replaced with the new information. • Cancel: Not to store a new information. The original screen will be resumed.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ 2. Press CH 5 / ∞ (or CH + / –) repeatedly to select an unnecessary PDT, then press SEL (or SELECT). The following screen appears. • S-Seek: To deactivate the PDT for S-Seek function After pressing SEL (or SELECT), the S-Seek Setting screen appears. – Select “Off” (to deactivate the PDT for S-Seek) or “On” (to activate the PDT for S-Seek) by using CH 5 / ∞ (or CH + / –) then SEL (or SELECT). Menu Options Settings 3.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ Basic Setting Procedure 1 Sirius ID 1. Press MENU. The Menu Options List screen appears on the display. Displays your 12 digit Sirius ID number. No adjustments are allowed in this mode. 2. Press CH 5 / ∞ (or CH + / –) repeatedly to select an desired item, then press SEL (or SELECT). The selected Option Setting screen appears. 3. Set the Option Setting as you like following the instruction described in each section that follows.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ Dimming Control: Press CH 5 / ∞ (or CH + / –) to select either “Manual” or “Automatic”, then press SEL (or SELECT). • Manual: A horizontal bar graph is displayed. Press CAT 3 / 2 (or CAT + / –) to adjust the display brightness manually, then press SEL (or SELECT). (You can also use CH 5 / ∞ (or CH + / –) for adjustment.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ 5 Add or Skip You can skip unwanted streams while tuning. Upon entering this mode, a stream list appears with the currently playing stream highlighted. Press CH 5 / ∞ (or CH + / –) to select a stream you want to skip then press SEL (or SELECT). “Skip” appears, next to the stream, on the screen. To activated skipped stream again, repeat the same procedure and delete “Skip”.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ Edit Code You can change the access code (default code—1111) as you like. 7 Audio Level Options You can adjust the audio level and gain at the same time when you feel that the sound through your JVC PnP is too small or too loud. Upon entering this mode, a horizontal bar graph is displayed. 1. Upon entering this mode, press the number keys 1 – 6 to enter the current access code (4-digit: default code—1111).
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ 8 Antenna Aiming 9 Memory Options This is required to be adjusted only when you use your JVC PnP at home. You can ensure optimum reception when locating the SIRIUS antenna. You can activate or deactivate S-Seek Function. In addition, you can delete all stored PDT (see page 21) at a time. Upon entering this mode, two horizontal bar graphs are displayed.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ 0 Time Based Features The following adjustments are possible on this submenu screen— • Clock • Alarm Clock • Program Alert • Auto Shutdown • Sleep Mode Clock When entering this menu option, you can set up the clock shown on the display. The clock data is provided via the SIRIUS Satellite stream, and will be updated automatically.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ Alarm Clock Program Alert You can set your JVC PnP to turn on at a specific time. The last selected stream prior to shutdown will be played when the Alarm turns on your JVC PnP. You can program your JVC PnP to switch to a specified stream at a specified time. • To use your programmed setting, make sure to set “Program Alert” to “Program Alert On”.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ Stream: Press CH 5 / ∞ (or CH + / –) to select a stream on the stream list shown on the screen, press SEL (or SELECT). Sleep Mode Program Alert On/Off: Press CH 5 / ∞ (or CH + / –) to select either “Program Alert On” or “Program Alert Off”, press SEL (or SELECT). Press CH 5 / ∞ (or CH + / –) to select the time, then press SEL (or SELECT). Your JVC PnP will now turn off after the selected time has passed.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ • • • • • • • • • Contrast Control—50% Dimming Control—Automatic FM On/Off—FM On Frequency selection—91.3MHz Output Level—70% Auto Memory Search—On Clock: Format—12 Hour Clock: Time Zone—Eastern Clock: Daylight Savings Time—DST Observed All preset streams and stored PDTs are also erased, and all skipped streams becomes unskipped (locked streams remain locked). Troubleshooting Your JVC PnP does not turn on. ] The fuse is blown.
KT-SR2000 http://www.jvcmobile.com Visit us on-line for Technical Support & Customer Satisfaction Survey. Having TROUBLE with operation? USA ONLY Call 1-800-252-5722 http://www.jvc.com We can help you! EN © 2004 Victor Company of Japan, Limited KT-SR2000_Cover.p65 2 0704MNMMDWKRI 04.7.