JVC KS-GC10Q Wireless Charging Magnetic Car Mount INSTRUCTION MANUAL Support magnetique de charge sans fil pour voiture MODE D'EMPLOI Soporte magnetico de carga inalambrica para vehfculo MANUAL DE INSTRUCCIONES JVCKENWOOD Corporation © 2020 JVCKENWOOD Corporation BSA-3538-00/ 00 (KH)
Safety precautions Read this page carefully to ensure safe operation. lnstdalloil and wl~- - - - - - - - 1.A. WARNING 1 Do not use this unit on vehicles except those that are equipped with a DC12V/DC24V supply. This may cause a fire or malfunction. Never install or wire the unit in a location that will obstruct the operation of the air bag. The air bag rr:iay malfunction, resulting in a fatal accident.
Trademarklnformatlon q• • The 'Qi' symbol is a trademark of the Wireless Power Consortium. @ Qualcomm quick charge 3. Q 9ualcomm Quick Charge IS a product of Qualcomm Technologies, Inc. Qualcomm is a trademark of Qualcomm incorporated, registered in the United States and other countries. Qualcomm Quick Charge is a trademark of Qualcomm incorporated. All Qualcomm incorporated trademarks are used with permission.
1m 0.7m 0.9m 2m 2m 0.3m 0 Pole (height: 1m, diameter: 0.3m) Tige (hauteur : 1 m, diametre: 0,3 m) Poste (altura: 1 m, diametro: 0,3 m) CJ Field of vision from steering position Champ de vision depuis la position de conduite Campo de vision desde la posici6n de direcci6n • Exempted area (size is subject to regulation) Zone exemptee (la taille est soumise areglementation) Area exenta (el tamano esta sujeto a regulaciones) Standards are reversed for right-hand drive cars.
P a ~ Contents/ Contenu du colls / Contenldo del ~_ 9uet _ e_ _ _ _ _ _ _ _ _ _ _ _ _ ___. CD-,, -~ i ...........JVC .' II/I. 10t ® ~--/ .'~.
Installation I Installation I lnstalaci6n 4 0· 0 + 1. Put the phone or phone case on a flat surface with the backside facing upwards. 2. Remove the release paper from the magnetic plate. 3. Line up the guiding "+" cross mark with the center of the backside of your phone or phone case and attach the magnetic plate to it as illustrated. 4. Remove the template guide from the magnetic plate.
1. Vissez l'ecrou dans le sens antihoraire pour le desserrer et le fixer au support de ventilation pour voiture. 2. Fixez le support de ventilation pour voiture al'unite comme illustre. 3. Vissez l'ecrou dans le sens des aiguilles d'une montre pour stabiliser le support de ventilation de voiture sur l'unite. 4. Tournez le bouton du support de ventilation pour voiture dans le sens antihoraire pour desserrer le collier. 5.
Operation I Fonctionnement I Funcionamiento ....,-,Bottom / Bas / Inferior Bottom / Bas / Inferior/ • When you want to charge your phone, move it close to the charger and the magnetic attraction locates the phone and automatically starts charging. • Verify the mounting direction of the phone. Align the direction of unit cable with the bottom of the phone. Unless aligned properly, it may cause lack of installation strength and not charge the phone properly.
Red light flashing Over temperature protection status ttat de protection contre la surchauffe Voyant rouge clignotant Estado de protecci6n contra sobre-temperatura Luz roja titilando Overvoltage protection status Red light flashing Statut de protection contre les surtensions Voyant rouge clignotant Estado de protecci6n contra sobre-tensi6n Luz roja titilando Troubleshooting Guide What might appear to be a malfunction in your unit may just be the result of slight misoperation or miswiring.
Specifications Specifications subject to change without notice. Qi Charger lnput ......................................................................... DC.5 V/2 A, 9 V/1.6 A Rated frequency .................................................... 110 kHz to 205 kHz Power ................................................................................................ l0W Max Operating temperature range .................................. 0° C to +40° C Transmission distance.....................................
For U.S.A. FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 18 of the FCC Rules. FCC NOTE NOTE: This equipment has been tested and found to comply with the limits pursuant to part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
JVCKENWOOD USA Corporation TO OUR VALUED CUSTOMER THANK YOU FOR PURCHASING THIS JVC PRODUCT. WE WANT TO HELP YOU ACHIEVE A PERFECT EXPERIENCE. JVC LIMITED WARRANTY ONLY FOR PRODUCT PURCHASED IN U.S.A. JVCKENWOOD USA Corporation warrants this product and all parts thereof, except as set forth below ONLY TO THE ORIGINAL RETAIL PURCHASER to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date of original purchase for the period shown below.
Jvc JVCKENWOOD CANADA INC. WARRANTY GARANTIE Warranty applies only to PRODUCT distributed in Canada by JVCKENWOOD CANADA INC. JVCKENWOOD CANADA INC. (hereafter called "JVC") gives the following express warranty for each new JVC product distributed in Canada by JVC and sold by an authorized JVC dealer.