ENGLISH FRANÇAIS ESPAÑOL KD-X350BTS / KD-X255BT / KD-X35MBS DIGITAL MEDIA RECEIVER INSTRUCTION MANUAL RÉCEPTEUR MULTIMÉDIA NUMÉRIQUE MANUEL D’INSTRUCTIONS RECEPTOR DE MEDIOS DIGITALES MANUAL DE INSTRUCCIONES For customer Use: Enter below the Model No. and Serial No. which are located on the top or bottom of the cabinet. Retain this information for future reference. Model No. Serial No. B5A-2132-00 [K] JS_JVC_KD_X350BTS_K_C.
Información acerca de la eliminación de equipos eléctricos y electrónicos al final de la vida útil (aplicable a los países que hayan adoptado sistemas independientes de recogida de residuos) Los productos con el símbolo de un contenedor con ruedas tachado no podrán ser desechados como residuos domésticos.
IC (Industry Canada) Notice This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
SOFTWARE LICENSE AGREEMENT The software embedded in the Product (hereinafter the "Licensed Software") provided by Licensor is copyrighted to or sublicensable by the Licensor, and this Agreement provides for the terms and conditions which Users shall follow in order to use the Licensed Software. The User shall use the Licensed Software by agreeing with the terms of this Software License Agreement.
Article 8 Termination In case the User falls under any of the events described in the following items, the Licensor may immediately terminate this Agreement or claim that the User compensates for the damage incurred by the Licensor due to such event: (1) when the User violated any provision of this Agreement; or (2) when a petition has been filed against the User for an attachment, provisional attachment, provisional disposition or any other compulsory execution.
CONTENTS BEFORE USE BEFORE USE 2 IMPORTANT BASICS 3 GETTING STARTED 4 • To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe Warning and Caution in this manual. • Please keep the manual in a safe and accessible place for future reference.
BASICS Faceplate Remote control (RM-RK52) Display window This unit can be remotely controlled with an optionally purchased remote control. Volume knob Remote sensor (Do not expose to bright sunlight.) Pull out the insulation sheet when using for the first time. Detach button Attach Detach How to reset To On the faceplate On the remote control Turn on the power . Press • Press and hold to turn off the power. ( Not available ) Adjust the volume Turn the volume knob. Press or .
GETTING STARTED 3 Set the basic settings 1 Press and hold . 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected or activated. 4 Press to exit. 1 To return to the previous setting item, press Cancel the demonstration . When you turn on the power for the first time (or [FACTORY RESET] is set to [YES]), the display shows: “CANCEL DEMO” “PRESS” “VOLUME KNOB” Default: XX SYSTEM 1 Press the volume knob.
GETTING STARTED RADIO CLOCK TIME SYNC ON: The clock time is automatically set using the Clock Time (CT) data in FM Radio Broadcast Data System signal. ; OFF: Cancels. CLOCK DISPLAY ON: The clock time is shown on the display even when the unit is turned off. ; OFF: Cancels. ENGLISH Select the display language for menu and music information if applicable. By default, ENGLISH is selected. ESPANOL “ST” or “STEREO” lights up when receiving an FM stereo broadcast with sufficient signal strength.
RADIO Other settings IF BAND AUTO: Increases the tuner selectivity to reduce interference noises from adjacent FM stations. (Stereo effect may be lost.) ; WIDE: Subjects to interference noises from adjacent FM stations, but sound quality will not be degraded and the stereo effect will remain. 3 Repeat step 2 until the desired item is selected/activated or follow MONO SET the instructions stated on the selected item. 4 Press to exit. ON: Improves the FM reception, but the stereo effect will be lost.
USB/iPod/ANDROID Start playback The source changes automatically and playback starts. USB input terminal USB USB 2.0 cable*1 (commercially available) iPod/iPhone Accessory of the iPod/iPhone*1 ANDROID*2 USB cable*1 (commercially available) To On the faceplate On the remote control Reverse/Fast-forward*3 Press and hold Select a file Press . Press Select a folder*4 Press . Press Repeat play*5 Press . Press and hold . . . repeatedly.
USB/iPod/ANDROID Select control mode Select a file from a folder/list While in iPod USB source, press repeatedly. HEAD MODE: Control iPod from this unit. IPHONE MODE: Control iPod using the iPod itself. However, you can still play/pause or file skip from this unit. While in ANDROID source, press repeatedly. AUTO MODE: Control Android device from this unit via JVC MUSIC PLAY application installed in the Android device.
Pandora® Preparation: Install the latest version of the Pandora application on your device (iPhone/iPod touch), then create an account and log in to Pandora. • Select [ON] for [PANDORA SRC] in [SOURCE SELECT]. ( 4) Create and store a new station 1 Press . 2 Turn the volume knob to select [NEW STATION], then press the knob. 3 Turn the volume knob to select [FROM TRACK] or [FROM ARTIST], then press the knob. A new station is created based on the current song or artist.
iHeartRadio® Preparation: Install the latest version of iHeartAuto application on your device (iPhone/iPod touch), then create an account and log in to iHeartRadio. • Select [ON] for [IHEART SRC] in [SOURCE SELECT]. ( 4) Start listening 1 Open the iHeartAuto application on your device. 2 Connect your device to the USB input terminal. USB input terminal Accessory of the iPod/iPhone* To On the faceplate On the remote control Playback/pause Press the volume knob.
Spotify Preparation: Install the latest version of the Spotify application on your device (iPhone/ iPod touch), then create an account and log in to Spotify. • Select [ON] for [SPOTIFY SRC] in [SOURCE SELECT]. ( 4) Start listening To On the faceplate Repeat play *3 Press Random play *3 repeatedly. ALL REPEAT, ONE REPEAT *1, REPEAT OFF repeatedly.*1 Press ALL RANDOM, RANDOM OFF 1 Open the Spotify application on your device. 2 Connect your device to the USB input terminal.
SiriusXM® Radio (for KD-X350BTS/KD-X35MBS) Only SiriusXM® brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world of satellite radio. A SiriusXM Vehicle Tuner and Subscription are required. For more information, visit . Preparation: 1 Connect the optional SiriusXM Vehicle Tuner (commercially available).
SiriusXM® Radio (for KD-X350BTS/KD-X35MBS) Using SiriusXM tuner models later than SXV200: This unit can assign a maximum of 18 SmartFavorites channels. Initially, all preset channels are assigned as SmartFavorites. • “ ” appears at the last character of the channel name for the SmartFavorites channels. SiriusXM Replay™ While listening to a channel.... 1 Press the volume knob. “ ” lights up and the unit memorizes this paused position. 2 Press the volume knob to start Replay.
SiriusXM® Radio (for KD-X350BTS/KD-X35MBS) TuneScan™ CODE SET 1 Press the volume knob to enter [NEW CODE]. 2 Turn the volume knob to select a number. 3 Press to move to the entry position. 4 Repeat steps 2 and 3 to enter a new 4-digit pass code. 5 Press the volume knob to confirm. 6 Repeat steps 2 to 5 to reconfirm the pass code. • Make a note of the new pass code to enter channel lock settings for next time. LOCK SETTING MATURE CH: Selects the SiriusXM-defined lock setting.
BLUETOOTH® BLUETOOTH — Connection Supported Bluetooth profiles – Hands-Free Profile (HFP) – Advanced Audio Distribution Profile (A2DP) – Audio/Video Remote Control Profile (AVRCP) – Serial Port Profile (SPP) – Phonebook Access Profile (PBAP) Supported Bluetooth codecs – Sub Band Codec (SBC) – Advanced Audio Coding (AAC) Connect the microphone MIC (microphone input terminal)* Microphone (supplied) Rear panel Adjust the microphone angle Pair and connect a Bluetooth device for the first time 1 Press to tur
BLUETOOTH® Auto Pairing BLUETOOTH — Mobile phone When you connect the iPhone/iPod touch/ Android device to the USB input terminal, pairing request (via Bluetooth) is automatically activated. Press the volume knob to pair once you have confirmed the device name. Automatic pairing request is activated only if: – Bluetooth function of the connected device is turned on. – [AUTO PAIRING] is set to [ON]. ( 19) – JVC MUSIC PLAY application is installed on the Android device ( 7) and [AUTO MODE] is selected ( 8).
BLUETOOTH® To On the faceplate Default: XX On the remote control While talking on the first incoming call... MIC GAIN LEVEL –10 to LEVEL +10 (LEVEL –04): The sensitivity of the microphone increases as the number increased. NR LEVEL LEVEL –05 to LEVEL+05 (LEVEL 00): Adjust the noise reduction level until the least noise is being heard during a phone conversation.
BLUETOOTH® Make a call using voice recognition Make a call You can make a call from the call history, phonebook, or dialing the number. Call by voice is also possible if your mobile phone has the feature. 1 Press to enter Bluetooth mode. “(First device name)” appears. • If two Bluetooth phones are connected, press again to switch to another phone. “(Second device name)” appears. 2 Turn the volume knob to select an item (see the following table), then press the knob.
BLUETOOTH® Bluetooth compatibility check mode Bluetooth mode settings 1 Press and hold . 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected/activated or follow the instructions stated on the selected item. to exit. 1 Press and hold 4 Press To return to the previous setting item, press .
BLUETOOTH® The connectivity result flashes on the display. “PAIRING OK” and/or “HANDS-FREE OK”*1 and/ or “AUD.STREAM OK”*2 and/or “PBAP OK”*3 : Compatible *1 Compatible with Hands-Free Profile (HFP) *2 Compatible with Advanced Audio Distribution Profile (A2DP) *3 Compatible with Phonebook Access profile (PBAP) After 30 seconds, “PAIRING DELETED” appears to indicate that pairing has been deleted, and the unit exits check mode. • To cancel, press and hold to turn off the power, then turn on the power again.
BLUETOOTH® Settings to use JVC Remote application STATUS JVC Remote application is designed to control the JVC car receiver’s operations from the iPhone/iPod (via Bluetooth or via USB input terminal) or Android smartphone (via Bluetooth). Preparation: Install the latest version of JVC Remote application on your device before connecting. For more information, visit . 1 Press and hold . 2 Turn the volume knob to select an item (see the following table), then press the knob. .
BLUETOOTH® Internet radio via Bluetooth You can listen to internet radio (Pandora, iHeartRadio and Spotify) on the iPhone/iPod touch/Android device via Bluetooth on this unit. • Make sure the USB input terminal is not connected to any device. Listen to Pandora Preparation: Select [ON] for [PANDORA SRC] in [SOURCE SELECT]. ( 4) 1 Open the Pandora application on your device. 2 Connect your device via Bluetooth connection.
AUX AUDIO SETTINGS Use a portable audio player 1 Connect a portable audio player (commercially available). 3.5 mm (1/8") stereo mini plug with “L” shaped connector (commercially available) Portable audio player 1 Press and hold . 2 Turn the volume knob to select an item (see the following table), Auxiliary input jack 2 Select [ON] for [BUILT-IN AUX] in [SOURCE SELECT]. ( 4) 3 Press repeatedly to select AUX. 4 Turn on the portable audio player and start playback. then press the knob.
AUDIO SETTINGS PRO EQ Adjust your own sound settings. • The settings are stored to [USER]. • The settings made may affect the current settings of [EASY EQ]. BALANCE*4 POSITION L15 to POSITION R15 (POSITION 00): Adjusts the left and right speaker output balance. VOLUME ADJUST LEVEL –15 to LEVEL +06 (LEVEL 00): Preset the initial volume level of each source (compared to the FM volume level). Before adjustment, select the source you want to adjust.
AUDIO SETTINGS KD-X255BT: SOUND EFFECT SPACE ENHANCE (Not applicable for TUNER source.) SMALL/MEDIUM/LARGE: Virtually enhances the sound space. ; OFF: Cancels. SND RESPONSE LEVEL1/LEVEL2/LEVEL3: Virtually makes the sound more realistic. ; OFF: Cancels. SOUND LIFT LOW/MIDDLE/HIGH: Virtually adjust the sound position heard from the speakers. ; OFF: Cancels. VOL LINK EQ ON: Boosts the frequency to reduce the noise heard from outside the car or running noise of the tyres. ; OFF: Cancels.
AUDIO SETTINGS Crossover settings Below are the available setting items for 2-way crossover and 3-way crossover. 2-way crossover setting items SPEAKER SIZE FRONT SIZE 3.5"/4"/4.75"/5"/6.5"/6.75"/7"/4×6/5×7/6×8/ 6×9/7×10 TWEETER SMALL/MIDDLE/LARGE/NONE (not connected) Caution Select a crossover type according to how the speakers are connected. ( 39, 40) If you select a wrong type: • The speakers may damage. • The output sound level may be extremely high or low.
AUDIO SETTINGS 3-way crossover setting items SPEAKER SIZE TWEETER SMALL/MIDDLE/LARGE MID RANGE WOOFER*3 3.5"/4"/4.75"/5"/6.5"/6.75"/7"/4×6/5×7/6×8/6×9 6.5"/8"/10"/12"/15" OVER/NONE (not connected) X ' OVER TWEETER MID RANGE WOOFER*3 Digital Time Alignment settings Digital Time Alignment sets the delay time of the speaker output to create a more suitable environment for your vehicle. • For more information, 28, Determining the value for [DISTANCE] and [GAIN] of [DTA SETTINGS].
DISPLAY SETTINGS AUDIO SETTINGS Determining the value for [DISTANCE] and [GAIN] of [DTA SETTINGS] If you specify the distance from the center of the currently set listening position to every speaker, the delay time will be automatically computed and set. 1 Determine the center of the currently set listening position as the reference point. 2 Measure the distances from the reference point to the speakers.
DISPLAY SETTINGS BRIGHTNESS Set the brightness for day and night separately. 1 DAY/NIGHT: Select day or night. 2 Select a zone. ( 28) 3 LEVEL 00 to LEVEL 31: Set the brightness level. TEXT SCROLL*2 SCROLL ONCE: Scrolls the display information once. ; SCROLL AUTO: Repeats scrolling at 5-second intervals. ; SCROLL OFF: Cancels. REFERENCES Maintenance Cleaning the unit Wipe off dirt on the faceplate with a dry silicone or soft cloth.
REFERENCES About iPod/iPhone • Via USB input terminal: Made for – iPod touch (5th and 6th generation) – iPod nano (7th generation) – iPhone 4S, 5, 5S, 5C, 6, 6 Plus, 6S, 6S Plus, SE, 7, 7 Plus • Via Bluetooth: Made for – iPod touch (5th and 6th generation) – iPhone 4S, 5, 5S, 5C, 6, 6 Plus, 6S, 6S Plus, SE, 7, 7 Plus • It is not possible to browse video files on the “Videos” menu in [HEAD MODE]. • The song order displayed on the selection menu of this unit may differ from that of the iPod/ iPhone.
REFERENCES Change the display information Each time you press , the display information changes. • If the information is unavailable or not recorded, “NO TEXT”, “NO NAME”, or other information (eg. station name) appears or display will be blank.
REFERENCES Display information Source name KD-X350BTS/KD-X35MBS KD-X255BT SPOTIFY/SPOTIFY BT Context title (Date/Clock)*1 Song title (Artist) Song title (Album name) Song title (Date/Clock)*1 Playing Time (Date/Clock)*1 Context title (Date) with music synchronisation*2 (back to the beginning) SIRIUS XM Channel number (Status) Channel name (Status) Artist (Status) Song title (Status) Content information (Status) Category name (Status) Date (Status) Channel number (Status) with music synchronisation*2
TROUBLESHOOTING USB/iPod • Adjust the volume to the optimum level. • Check the cords and connections. “MISWIRING CHECK WIRING THEN PWR ON” appears. Turn the power off, then check to be sure the terminals of the speaker wires are insulated properly. Turn the power on again. “PROTECTING SEND SERVICE” appears. Send the unit to the nearest service center. Source cannot be selected. Check the [SOURCE SELECT] setting. ( 4) • Radio reception is poor. • Static noise while listening to the radio.
TROUBLESHOOTING Pandora “CANNOT PLAY” Pandora iHeartRadio “NO DEVICE” or “READING” • Switch off the developer options on the Android device. keeps flashing. • Reconnect the Android device. • If this does not solve the problem, the connected Android device does not support [AUTO MODE]. ( 30) Playback is intermittent or sound skips. 34 • Make sure JVC MUSIC PLAY APP is installed on the Android device. ( 7) • Reconnect the Android device and select the appropriate control mode.
TROUBLESHOOTING Bluetooth® Remedy Symptom Remedy Sound is being interrupted • Reduce the distance between the unit and the Bluetooth audio player. or skipped during playback • Turn off, then turn on the unit and try to connect again. of a Bluetooth audio • Other Bluetooth devices might be trying to connect to player. the unit. “CHECK ANTENNA” Check that the antenna and its connection are in good condition. “CHECK TUNER” Make sure the SiriusXM Vehicle Tuner is connected to the unit.
20 Hz — 20 kHz Input Maximum Voltage 1 000 mV Input Impedance 30 kΩ Quieting Sensitivity (DIN S/N = 46 dB) 17.2 dBf (2.0 μV/75 Ω) Frequency Response (±3 dB) 30 Hz — 15 kHz Version Bluetooth 3.0 Signal-to-Noise Ratio (MONO) 64 dB Frequency Range 2.402 GHz — 2.480 GHz Stereo Separation (1 kHz) 40 dB Output Power +4 dBm (MAX), 0 dBm (AVE) Power Class 2 530 kHz — 1 700 kHz (10 kHz step) 531 kHz — 1 611 kHz (9 kHz step) Maximum Communication Range Line of sight approx. 10 m (32.
INSTALLATION/CONNECTION General SPECIFICATIONS Operating Voltage (10.5 V — 16 V allowable) 14.4 V Maximum Current Consumption 10 A Operating Temperature Range –10°C — +60°C Installation Size (W × H × D) 182 mm × 53 mm × 100 mm (7-3/16" × 2-1/8" × 3-15/16") Net Weight (includes Trimplate, Mounting Sleeve) 0.6 kg (1.4 lbs) Warning • The unit can only be used with a 12 V DC power supply, negative ground. • Disconnect the battery’s negative terminal before wiring and mounting.
INSTALLATION/CONNECTION Part list for installation (A) Faceplate Installing the unit (in-dash mounting) (B) Trim plate Do the required wiring. ( 39) (C) Mounting sleeve (D) Wiring harness Hook on the top side Orientate the trim plate as illustrated before fitting. Dashboard of your car (E) Extraction key Bend the appropriate tabs to hold the sleeve firmly in place.
INSTALLATION/CONNECTION Wiring connection IMPORTANT We recommend installing the unit with a commercially available custom wiring harness specific for your car and leave this job to professionals for your safety. Consult your car audio dealer. Antenna terminal Vehicle dashboard Fuse (10 A) Light blue/yellow Factory wiring harness (vehicle) To the steering wheel remote control adapter Join the same color wires together.
INSTALLATION/CONNECTION Connecting external components KD-X350BTS/KD-X35MBS: MIC (Microphone input terminal) ( 15) KD-X350BTS/KD-X35MBS: Expansion port (12 V 500 mA) To the optional SiriusXM Vehicle Tuner (commercially available) ( 12) KD-X255BT: Microphone input jack ( 15) Connecting external amplifiers via output terminals KD-X350BTS/ KD-X35MBS KD-X255BT Remote wire (not supplied) Signal cord (not supplied) JVC Amplifier*2 To remote lead (blue/white) of the wiring harness.
libFLAC Copyright (C) 2000-2009 Josh Coalson Copyright (C) 2011-2013 Xiph.Org Foundation Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
WHEN IT IS NOT REQUIRED TO DETACH THE FRONT CONTROL PANEL FROM THE MAIN UNIT, USETHE PROVIDED SCREWTO ATTACH THE CONTROL PANEL TO THE MAIN UNIT.
JVCKENWOOD USA Cor oration TO OUR VALUED CUSTOMER THANK YOU FOR PURCHASING THIS JVC PRODUCT. WE WANT TO HELP YOU ACHIEVE A PERFECT EXPERIENCE. JVC LIMITED WARRANTY ON LY FOR PRODUCT PURCHASED IN U.S.A. JVCKENWOOD USA Corporation warrants this product and all parts thereof, except as set forth below ONLY TO THE ORIGINAL RETAIL PURCHASER to be FREE FROM DEFECTIVE MATERIALS AND WO RKM ANSHIP from the date of original purchase for the period shown below.
CANADA .JVC JVCKENWOOD CANADA INC. Warranty applies only to PRO~C~~s~i~~~;Canada GAR ANTlE by JVCKENWOOD CANADA INC. La garantls' appliqueseulement aux PRODUITS distrlbues au Canada par JVCKENWOOD CANADA INC. JVCKENWOOD CANADA INC. (hereafter called "JVC") gives the following express warranty for each new JVC product distributed in Canada by JVC and sold by an authorized JVC dealer.