ENGLISH FRANÇAIS ESPAÑOL KD-X470BHS / KD-X370BTS / KD-X37MBS / KD-X270BT / KD-SX26BT DIGITAL MEDIA RECEIVER INSTRUCTION MANUAL RÉCEPTEUR MULTIMÉDIA NUMÉRIQUE MANUEL D’INSTRUCTIONS RECEPTOR DE MEDIOS DIGITALES MANUAL DE INSTRUCCIONES For customer Use: Enter below the Model No. and Serial No. which are located on the top or bottom of the cabinet. Retain this information for future reference. Model No. Serial No. B5A-3105-00a [K] JS_JVC_KD_X470BHS_K_C_00a.
Información acerca de la eliminación de equipos eléctricos y electrónicos al final de la vida útil (aplicable a los países que hayan adoptado sistemas independientes de recogida de residuos) Los productos con el símbolo de un contenedor con ruedas tachado no podrán ser desechados como residuos domésticos.
IC (Industry Canada) Caution This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device.
Article 4 Right pertaining to the Licensed Software Any and all copyrights and other rights pertaining to the Licensed Software and related documents shall belong to the Licensor or the original holder of the right who granted to the Licensor the license or sublicense for the Licensed Software (hereinafter the "Original Rightholder"), and the User shall not be entitled to any right other than the license granted hereunder, in respect of the Licensed Software and any related documents.
Important Notice concerning the Software -jansson Copyright (c) 2009-2012 Petri Lehtinen
sha2 AUTHOR: Aaron D. Gifford - http://www.aarongifford.com/ Copyright (c) 1995, 1996 Carnegie-Mellon University. All rights reserved. Author: Chris G. Demetriou Copyright (c) 2000-2001, Aaron D. Gifford All rights reserved.
T-Kernel 2.0 This product uses the source code of T-Kernel 2.0 under T-License 2.0 granted by T-Engine Forum (www.tron.org) BSD-3-Clause Copyright (c) 2000-2001, Aaron D. Gifford All rights reserved. You may obtain a copy of the license at https://opensource.org/licenses/BSD-3-Clause THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
Contents Before Use ................................................................................................. 3 References .............................................................................................. 37 Basics ......................................................................................................... 4 Maintenance Getting Started ........................................................................................
Before Use IMPORTANT • To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe Warnings and Cautions in this manual. • Please keep the manual in a safe and accessible place for future reference. WARNING • Do not operate any function that takes your attention away from safe driving. • Do not ingest the battery, Chemical Burn Hazard. The remote control supplied with this product contains a coin/button cell battery.
Basics Faceplate Attach KD-X470BHS/KD-X370BTS/KD-X37MBS: Volume knob Display window* Detach Detach button How to reset KD-X270BT/KD-SX26BT: Reset the unit within 5 seconds after detaching the faceplate. * Only for illustration purpose. To On the faceplate Turn on the power Press B SRC. • Press and hold to turn off the power. Adjust the volume Turn the volume knob. Press the volume knob to mute the sound or pause playback. • Press again to cancel.
Getting Started Basics Remote control (RM-RK52) (except for KD-SX26BT) This unit can be remotely controlled with an optionally purchased remote control. Remote sensor (Do not expose to bright sunlight.) 1 Cancel the demonstration When you turn on the power for the first time (or [FACTORY RESET] is set to [YES], see page 6), the display shows: “CANCEL DEMO” “PRESS” “VOLUME KNOB” Pull out the insulation sheet when using for the first time. 1 Press the volume knob. [YES] is selected for the initial setup.
Getting Started 9 Press to exit. To return to the previous setting item, press 3 [F/W UPDATE] . [UPDATE SYSTEM]/[UPDATE HD] [F/W UP xxxx]/ [F/W UP Vxx] Set the basic settings . 1 Press and hold 2 Turn the volume knob to select an item (see the following table), then [FACTORY RESET] press the knob. 3 Repeat step 2 until the desired item is selected or activated. 4 Press to exit. To return to the previous setting item, press Default: [XX] (Not applicable when 3-way crossover is selected.
HD Radio™ Tuner (for KD-X470BHS) You can tune in to both conventional and HD Radio broadcasts. • To find HD Radio stations in your area, visit . 2 Turn the volume knob to select a preset number, then press the knob. “MEMORY” appears once the station or channel is stored. Select a stored station or channel Press one of the number buttons (1 to 6). (or) 1 Press to enter HD search select mode. 2 Turn the volume knob to select [PRESET LIST], then press the knob.
HD Radio™ Tuner (for KD-X470BHS) Display received emergency alert messages 4 Set the activation day*2 and time. “M” indicator lights up when complete. The received emergency alert messages are stored in the Alert Message List, and you can check them later. While listening to the HD RADIO source... 1 Press to enter HD search select mode. 2 Turn the volume knob to select [ALRT MSG LIST], then press the knob.
Radio (for KD-X370BTS/KD-X37MBS/KD-X270BT/KD-SX26BT) Select a stored station Press one of the number buttons (1 to 6). (or) 1 Press . 2 Turn the volume knob to select a preset number, then press the knob. Other settings Search for a station 1 Press B SRC repeatedly to select FM or AM. 2 Press S / T (or press H / I on the remote control) to search for a station automatically.
Radio (for KD-X370BTS/KD-X37MBS/KD-X270BT/KD-SX26BT) [SSM] [SSM 01–06]/[SSM 07–12]/[SSM 13–18]: Automatically presets up to 18 stations for FM. “SSM” stops flashing when the first 6 stations are stored. Select [SSM 07–12]/[SSM 13–18] to store the following 12 stations. [IF BAND] [AUTO]: Increases the tuner selectivity to reduce interference noises from adjacent FM stations. (Stereo effect may be lost.
USB/iPod Select music drive Basic operations While in USB source, press 5 MODE repeatedly. Stored songs in the following drive will be played back. • Selected internal or external memory of a smartphone (Mass Storage Class). • Selected drive of a multiple drive device. Selectable source: • KD-X470BHS/KD-X370BTS/KD-X37MBS: USB/iPod USB or iPod BT • KD-X270BT/KD-SX26BT: USB Select control mode While in iPod USB source (or iPod BT source), press 5 MODE repeatedly.
AUX USB/iPod Quick search (applicable only for USB source) If you have many files, you can search through them quickly. 1 2 3 4 Press . Turn the volume knob to select a folder/list, then press the knob. Turn the volume knob quickly to browse through the list quickly. Turn the volume knob to select a file, then press the knob. Selected file starts playing. You can listen to music from a portable audio player via the auxiliary input jack. Preparation: Select [ON] for [BUILT-IN AUX] in [SOURCE SELECT].
Pandora® You can listen to Pandora on the following device: To On the faceplate On the remote control • KD-X470BHS/KD-X370BTS/KD-X37MBS: iPhone/iPod touch (via Bluetooth or via USB input terminal) or Android device (via Bluetooth) • KD-X270BT/KD-SX26BT: Android device (via Bluetooth) Play back/pause Press the volume knob. Press d. Skip a track Press T. Press I. Select thumbs up or thumbs down* Press 2 J / 1 K. Press J / K.
Pandora® Bookmark current song information Press and hold the volume knob. “BOOKMARKED” appears and the information is stored to your device. • The bookmark is available on your Pandora account but not on this unit.
Spotify To On the faceplate Play back/pause Press the volume knob. Press d. Skip a track Press S*1 / T. Press H*1 / I. Select thumbs up or thumbs down *2 Press 2 J / 1 K. Press J / K. Start radio Press and hold 5. ( Not available ) Repeat play*3 Press 4 B repeatedly. [ALL REPEAT], [ONE REPEAT]*1, [REPEAT OFF] Random play*3 Press 3 A repeatedly *1. [ALL RANDOM], [RANDOM OFF] On the remote control ( Not available ) Search for a song or station .
SiriusXM® Radio (for KD-X470BHS/KD-X370BTS/KD-X37MBS) Only SiriusXM® brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world of satellite radio. A SiriusXM Vehicle Tuner and Subscription are required. For more information, visit . Preparation: 1 Connect the optional SiriusXM Vehicle Tuner (commercially available).
SiriusXM® Radio (for KD-X470BHS/KD-X370BTS/KD-X37MBS) Select a stored channel SmartFavorites and TuneStart™ Press one of the number buttons (1 to 6) (or press J / K on the remote control). (or) 1 Press . 2 Turn the volume knob to select PRESET, then press the knob. 3 Turn the volume knob to select a preset number, then press the knob. User preset channels are initially assigned as the SmartFavorites channels. SmartFavorite channel is available with SXV200 or later SiriusXM tuner models.
SiriusXM® Radio (for KD-X470BHS/KD-X370BTS/KD-X37MBS) To On the faceplate Select a stored SmartFavorite channel Press one of the number buttons (1 to 6). 1 Press . 2 Turn the volume knob to select PRESET, then press the knob. 3 Turn the volume knob to select a preset number, then press the knob. Cancel SmartFavorites channels 1 Press . 2 Turn the volume knob to select PRESET, then press the knob. 3 Turn the volume knob to select a preset number, then press and hold the knob.
SiriusXM® Radio (for KD-X470BHS/KD-X370BTS/KD-X37MBS) [CODE SET] 1 2 3 4 5 6 • Press the volume knob to enter [NEW CODE]. Turn the volume knob to select a number. Press S / T to move to the entry position. Repeat step 2 and step 3 to enter a new 4-digit pass code. Press the volume knob to confirm. Repeat step 2 to step 5 to reconfirm the pass code. Make a note of the new pass code to enter channel lock settings for next time. [LOCK SETTING] [MATURE CH]: Selects the SiriusXM-defined lock setting.
Bluetooth® Using Other Applications 3 Repeat step 2 until the desired item is selected or activated. 4 Press to exit. To return to the previous setting item, press . Default: [XX] [REMOTE APP] [SELECT] [IOS] (For KD-X470BHS/KD-X370BTS/KD-X37MBS) Selects the device ([IOS] or [ANDROID]) to use the application. [YES]: Selects iPhone/iPod touch to use the application via Bluetooth or connected via USB input terminal. ; [NO]: Cancels.
Bluetooth® Pair and connect a Bluetooth device for the first time 1 Press B SRC to turn on the unit. 2 Search and select the name of your receiver (“KD-X470BHS”/ “KD-X370BTS”/“KD-X37MBS”/“KD-X270BT”/“KD-SX26BT”) on the Bluetooth device. “BT PAIRING” flashes on the display. • For some Bluetooth devices, you may need to enter the Personal Identification Number (PIN) code immediately after searching. 3 Perform (A) or (B) depending on what appears on the display.
Bluetooth® Bluetooth — Mobile phone The following operations may differ or be unavailable depending on the connected phone. To On the faceplate On the remote control Answer a call Press or the volume knob. Press J / K / H / I. Reject a call Press and hold or the volume knob. Press and hold J / K / H / I. End a call Press and hold or the volume knob. Press and hold J / K / H / I. First incoming call...
Bluetooth® *1 This adjustment will not affect the volume of the other sources. *2 Press and hold VOL + to continuously increase the volume to 15. *3 Operations may vary according to the connected Bluetooth device. Default: [XX] [SETTINGS] [AUTO ANSWER] [01 SEC] to [30 SEC]: Answers an incoming call automatically in the selected time (in seconds). ; [OFF]: Cancels. Improve the voice quality While talking on the phone...
Bluetooth® [RECENT CALL] [PHONEBOOK] (Applicable only if the phone supports PBAP.) 1 Press the volume knob to select a name or a phone number. • “<” indicates call received, “>“ indicates call made, “M” indicates call missed. • “NO HISTORY” appears if there is no recorded call history or call number. 2 Press the volume knob to call. You can store up to 6 contacts into the number buttons (1 to 6). 1 Press to enter Bluetooth mode.
Bluetooth® Default: [XX] [BT MODE] [PHONE SELECT] [AUDIO SELECT] Selects the phone or audio device to connect or disconnect. “ ” appears in front of the device name when connected. “ ” appears in front of the current playback audio device. • You can connect a maximum of two Bluetooth phones and one Bluetooth audio device at a time. Bluetooth compatibility check mode You can check the connectivity of the supported profile between the Bluetooth device and the unit.
Bluetooth® The connectivity result flashes on the display. “PAIRING OK” and/or “HANDS-FREE OK”*1 and/or “AUD.STREAM OK”*2 and/ or “PBAP OK”*3: Compatible Bluetooth — Audio *1 Compatible with Hands-Free Profile (HFP) *2 Compatible with Advanced Audio Distribution Profile (A2DP) *3 Compatible with Phonebook Access profile (PBAP) After 30 seconds, “PAIRING DELETED” appears to indicate that pairing has been deleted, and the unit exits check mode.
AMAZON ALEXA (for KD-X470BHS/KD-X370BTS/KD-X37MBS) Bluetooth® To Repeat play On the faceplate Press 4 B repeatedly. [TRACK REPEAT], [ALL REPEAT], [GROUP REPEAT]*1, [REPEAT OFF] Random play On the remote control ( Not available ) Press 3 A repeatedly. [GROUP RANDOM]*1, [ALL RANDOM], [RANDOM OFF] Select a file from a folder/list Refer to “Select a file to play” on page 11. Switch between connected Bluetooth audio devices Press 5.
AMAZON ALEXA (for KD-X470BHS/KD-X370BTS/KD-X37MBS) Option B: Manual Pairing 1 Start up the Alexa mobile application and go to the “Devices” tab. 2 Tap the “ + “ icon at the top right corner. 3 Tap “Add Device”. 4 Tap “Automotive Accessory” or “Headphones” from the list of device types. 5 Tap the name of your receiver (“KD-X470BHS”/“KD-X370BTS”/ “KD-X37MBS”) and follow the instructions. Once the setup process is completed, the Alexa mobile application will establish a connection with this unit.
AMAZON ALEXA (for KD-X470BHS/KD-X370BTS/KD-X37MBS) Audio Settings Start listening While in Alexa idle state... 1 Press on the unit to activate Alexa. The display shows: “LISTENING...”. 2 Communicate with Alexa via the connected microphone. (Page 20) 3 During music playback in ALEXA source, you can perform the following operations: To On the faceplate On the remote control Play back/pause Press the volume knob. Press d. Reverse skip/ Forward skip Press S / T. Press H / I. 1 Press and hold .
Audio Settings [PRO EQ] Adjusts your own sound settings for each source. • The settings are stored to [USER] in [PRESET EQ]. • The settings made may affect the current settings of [EASY EQ]. [62.5HZ] [LEVEL –09] to [LEVEL +09] ([LEVEL 00]): Adjusts the level to memorize for each source. (Before making an adjustment, select the source you want to adjust.) [ON]: Turns on the extended bass. ; [OFF]: Cancels. [100HZ]/[160HZ]/[250HZ]/[400HZ]/[630HZ]/[1KHZ]/[1.6KHZ]/[2.5KHZ]/[4KHZ]/ [6.
Audio Settings Speaker output settings [SPK/PRE OUT] [SOUND EFFECT] [SPACE ENHANCE] (Not applicable for FM/AM source.) [SMALL]/[MEDIUM]/[LARGE]: Virtually enhances the sound space. ; [OFF]: Cancels. [SND RESPONSE] [LEVEL1]/[LEVEL2]/[LEVEL3]: Virtually makes the sound more realistic. ; [OFF]: Cancels. [SOUND LIFT] [LOW]/[MIDDLE]/[HIGH]: Virtually adjusts the sound position heard from the speakers. ; [OFF]: Cancels.
Audio Settings Connection via speaker leads Crossover settings You can also connect the speakers without using an external amplifier but still being able to enjoy the subwoofer output with these settings. (Page 45) Below are the available setting items for 2-way crossover and 3-way crossover. CAUTION Setting on [SPK/PRE OUT] Audio signal through rear speaker lead L (left) R (right) Rear speakers output Rear speakers output [REAR/SUB.W]* Rear speakers output Rear speakers output [SUB.W/SUB.
Audio Settings 2-way crossover setting items [SUBWOOFER LPF]*2*3 [SW LPF FRQ] [30HZ]/[40HZ]/[50HZ]/[60HZ]/[70HZ]/[80HZ]/ [90HZ]/[100HZ]/[120HZ]/[150HZ]/[180HZ]/ [220HZ]/[250HZ]/[THROUGH] [3.5"]/[4"]/[4.75"]/[5"]/[6.5"]/[6.75"]/[7"]/ [4×6]/[5×7]/[6×8]/[6×9]/[7×10] [SW LPF SLOPE] [–06DB]/[–12DB]/[–18DB]/[–24DB] [SMALL]/[MIDDLE]/[LARGE]/[NONE] (not connected) [SW LPF GAIN] [SPEAKER SIZE] [FRONT] [SIZE] [TWEETER] [REAR]*1 [3.5"]/[4"]/[4.75"]/[5"]/[6.5"]/[6.
Audio Settings [MID RANGE] [HPF FRQ] [30HZ]/[40HZ]/[50HZ]/[60HZ]/[70HZ]/[80HZ]/[90HZ]/ [100HZ]/[120HZ]/[150HZ]/[180HZ]/[220HZ]/[250HZ]/ [THROUGH] [HPF SLOPE] [–06DB]/[–12DB] [LPF FRQ] [1KHZ]/[1.6KHZ]/[2.5KHZ]/[4KHZ]/[5KHZ]/[6.3KHZ]/ [8KHZ]/[10KHZ]/[12.5KHZ]/[THROUGH] [LPF SLOPE] [–06DB]/[–12DB] Digital Time Alignment sets the delay time of the speaker output to create a more suitable environment for your vehicle. • For more information, see “Determining the delay time automatically” on page 35.
Display Settings Audio Settings Determining the delay time automatically If you specify the distance from the currently set listening position to every speaker, the delay time will be automatically calculated. 1 Set [POSITION] and determine the listening position as the reference point (the reference point for [FRONT ALL] will be the center between the right and left in the front seats). 2 Measure the distances from the reference point to the speakers.
Display Settings 1 Press and hold . 2 Turn the volume knob to select an item (see the following table), then press the knob. *1 The illumination control wire connection is required. (Page 45) *2 Some characters or symbols will not be shown correctly (or will be blank). *3 Functionality depends on the type of phone used. 3 Repeat step 2 until the desired item is selected/activated or follow the instructions stated on the selected item. to exit.
References Maintenance Cleaning the unit Wipe off dirt on the faceplate with a dry silicone or soft cloth. Cleaning the connector Detach the faceplate and clean the connector gently with a cotton swab. Be careful not to damage the connector. Connector (on the reverse side of the faceplate) More information For: – Latest firmware updates and latest compatible item list – JVC original application – Any other latest information Visit .
References About AMAZON ALEXA • Alexa is a third party service, therefore the specifications are subject to change without prior notice. Accordingly, compatibility may be impaired or some or all of the services may become unavailable. Change the display information Each time you press , the display information changes. • If the information is unavailable or not recorded, “NO TEXT”, “NO NAME”, or other information (eg. station name) appears or display will be blank.
References BT AUDIO/ALEXA Song title (Artist) Song title (Artist) with Music Synchronization Effect*2 Song title (Album title) Song title (Date) Playing time (Date) back to the beginning Frequency (Date) Frequency (Date) with Music Synchronization Effect*2 back to the beginning AUX Source name (Date) Source name (Date) with Music Synchronization Effect*2 back to the beginning For FM Radio Broadcast Data System stations only: Station name/Program type (Date) Station name/Program type (Date) with Music S
Troubleshooting Source name Display information: Main SPOTIFY BT Context title Context title with Music Synchronization Effect* Song title Artist Album title Playing Time Date back to the beginning BT AUDIO Song title/Artist Song title/Artist with Music Synchronization Effect* Album title/Artist Playing time Date back to the beginning AUX Source name Source name with Music Synchronization Effect* Date back to the beginning Symptom Remedy Sound cannot be heard.
Troubleshooting USB/iPod Remedy Symptom • Check whether the connected USB device is compatible with this unit and ensure the file systems are in supported formats. (Page 37) • Reattach the USB device. “UNRESPONSIVE DEVICE” appears. Make sure the USB device is not malfunction and reattach the USB device. “USB HUB IS NOT SUPPORTED” appears. This unit cannot support a USB device connected via a USB hub. “CANNOT PLAY” appears. Connect a USB device that contains playable audio files.
Troubleshooting Bluetooth® 42 Remedy “CH LOCKED LOCK CODE?” The selected channel is locked. Enter the correct pass code to unlock. (Page 18) “CHAN UNSUB” The selected channel is unsubscribed. Call 1-866-635-2349 in the U.S.A. or 1-877-438-9677 in Canada to subscribe. (Page 16) “CH UNAVAIL” The selected channel is unavailable. For more information about the SiriusXM channel lineup, visit . “CHECK ANTENNA” Check that the antenna and its connection are in good condition.
Installation/Connection Troubleshooting AMAZON ALEXA Bluetooth® Symptom Remedy “H/W ERROR” Reset the unit and try the operation again. If “H/W ERROR” appears again, consult your nearest service center. “SWITCHING NG” The connected phones might not support phone switching feature. The Bluetooth connection between the Bluetooth device and the unit is unstable. Delete the unused registered Bluetooth device from the unit. (Page 25) No response from Alexa after the voice input.
Installation/Connection Part list for installation Installing the unit (in-dash mounting) (A) Faceplate (×1) (B) Trim plate (×1) (C) Mounting sleeve (×1) (D) Wiring harness (×1) Do the required wiring. (Page 45) Hook on the top side Orientate the trim plate as illustrated before fitting. Dashboard of your car (E) Extraction key (×2) Bend the appropriate tabs to hold the sleeve firmly in place.
Installation/Connection Wiring connection IMPORTANT We recommend installing the unit with a commercially available custom wiring harness specific for your car and leave this job to professionals for your safety. Consult your car audio dealer. Antenna terminal Vehicle dashboard Fuse (10 A) Light blue/yellow Factory wiring harness (vehicle) To the steering wheel remote control adapter Custom wiring harness (separately purchased) Join the same color wires together.
Installation/Connection Connect external components Connect external amplifiers via output terminals Signal cord (not supplied) JVC Amplifier* Output terminals Remote wire (not supplied) To remote lead (blue/white) of the wiring harness. (Page 45) No Part 1 For KD-X470BHS: MIC (Microphone input terminal) (page 20) 2 For KD-X370BTS/KD-X37MBS: MIC (Microphone input terminal) (page 20) 3 Output terminals (See “Connect external amplifiers via output terminals”.
Specifications KD-X470BHS: Frequency Range FM Frequency Range 87.9 MHz — 107.9 MHz (200 kHz step) 87.5 MHz — 108.0 MHz (50 kHz step) 7.2 dBf (0.63 μV/75 Ω) Usable Sensitivity (S/N = 26 dB) 8.2 dBf (0.71 μV/75 Ω) Quieting Sensitivity (DIN S/N = 46 dB) 15.2 dBf (1.58 μV/75 Ω) Quieting Sensitivity (DIN S/N = 46 dB) 17.2 dBf (2.
Specifications Signal-to-Noise Ratio (1 kHz) KD-X470BHS: 98 dB Dynamic Range 93 dB Channel Separation KD-X470BHS: 92 dB Bluetooth MP3 Decode 48 50 W × 4 or 50 W × 2 + 50 W × 1 (Subwoofer = 4 Ω) Full Bandwidth Power (at less than 1 % THD) 22 W × 4 Speaker Impedance 4Ω—8Ω Preout Level/Load KD-X470BHS: 5 000 mV/10 kΩ KD-X370BTS/KD-X37MBS: 4 000 mV/10 kΩ Compliant with MPEG-1/2 Audio Layer-3 WMA Decode Compliant with Windows Media Audio AAC Decode KD-X470BHS/KD-X370BTS/KD-X37MBS: AAC-LC “.
JS_JVC_KD_X470BHS_K_EN_1.
Table des matieres Avant l’utilisation .................................................................................... 3 Références............................................................................................... 37 Fonctionnement de base ....................................................................... 4 Entretien Prise en main ............................................................................................
Avant l’utilisation IMPORTANTES • Pour utiliser correctement l’appareil, veuillez ce manuel complément avant de l’utiliser. Il est particulièrement important que vous lisiez et acceptiez les avertissements et les précautions de ce manuel. • Veuillez garder ce manuel dans un endroit sûr et accessible pour une utilisation future. MISE EN GARDE • N’utilisez aucune fonction qui risque de vous distraire de la conduite sure de votre véhicule. • Ne pas ingérer la pile. Risque de brûlures chimiques.
Fonctionnement de base Façade Attachez KD-X470BHS/KD-X370BTS/KD-X37MBS: Bouton de volume Fenêtre d’affichage* Détachez Touche de détachement Comment réinitialiser KD-X270BT/KD-SX26BT: Réinitialisez l’appareil en moins de 5 secondes après avoir détaché la façade. * Uniquement à des fins d’illustration. Pour Sur la façade Mettez l’appareil sous tension Appuyez sur B SRC. • Maintenez la touche enfoncée pour mettre l’appareil hors tension. Tournez le bouton de volume.
Fonctionnement de base Prise en main Télécommande (RM-RK52) (sauf pour KD-SX26BT) Cet appareil peut être commandé à distance avec une télécommande vendue séparément. Capteur de télécommande (Ne l’exposez Pas à la lumière directe du soleil.) 1 Annulez la démonstration Quand vous mettez l’appareil sous tension pour la première fois (ou que [FACTORY RESET] est réglé sur [YES], voir page 6), l’affichage montre: “CANCEL DEMO” “PRESS” “VOLUME KNOB” 1 Appuyez sur le bouton de volume.
Prise en main 9 Appuyez sur pour quitter. Pour retourner à l’option de réglage précédente, appuyez sur 3 [F/W UPDATE] . [UPDATE SYSTEM]/[UPDATE HD] [F/W UP xxxx]/ [F/W UP Vxx] Faites les réglages de base 1 Maintenez enfoncée . 2 Tournez le bouton de volume pour sélectionner un élément (voir le tableau suivant), puis appuyez sur le bouton. 3 Répétez l’étape 2 jusqu’à ce que l’élément souhaité soit sélectionné ou activé. 4 Appuyez sur pour quitter.
Tuner HD Radio™ (pour KD-X470BHS) Vous pouvez accorder à la fois les émissions conventionnelles et HD Radio. • Pour en savoir plus sur les stations HD Radio dans votre région, consultez le site . 2 Tournez le bouton de volume pour choisir un numéro de préréglage, puis appuyez sur le bouton. “MEMORY” apparaît une fois que la station ou le canal est mémorisé.
Tuner HD Radio™ (pour KD-X470BHS) Affichage des messages d’urgence reçus 4 Réglez l’heure et le jour*2 de mise en service. L'indicateur “M” s’allume quand le réglage est terminé. Les messages d’urgence reçus sont stockés dans la liste des messages d’urgence, et vous pouvez les vérifier plus tard. Lors de l’écoute de la source HD RADIO... La minuterie de radio ne se met pas en service dans les cas suivants. • L’appareil est mis hors tension.
Radio (pour KD-X370BTS/KD-X37MBS/KD-X270BT/KD-SX26BT) Sélectionnez une station mémorisée Appuyez sur l’une des touches numériques (1 à 6). (ou) 1 Appuyez sur . 2 Tournez le bouton de volume pour choisir un numéro de préréglage, puis appuyez sur le bouton. Autres paramètres Recherchez une station 1 Appuyez répétitivemenent sur B SRC pour sélectionner FM ou AM. 2 Appuyez sur S / T (ou appuyez sur H / I sur la télécommande) pour rechercher une station automatiquement.
Radio (pour KD-X370BTS/KD-X37MBS/KD-X270BT/KD-SX26BT) [SSM] [SSM 01–06]/[SSM 07–12]/[SSM 13–18]: Prérègle automatiquement un maximum de 18 stations pour FM. “SSM” s’arrête de clignoter quand les 6 premières stations sont mémorisées. Sélectionnez [SSM 07–12]/ [SSM 13–18] pour mémoriser les 12 stations suivantes. [IF BAND] [AUTO]: Augmente la sélectivité du tuner pour réduire les interférences des stations FM adjacentes. (L’effet stéréo peut être perdu.
USB/iPod Sélectionnez le lecteur de musique Opérations de base Quand la source est USB, appuyez répétitivement sur 5 MODE. Les morceaux mémorisés dans le lecture suivant seront lus. • Mémoire sélectionnée interne ou externe d’un smartphone (Mass Storage Class). • Lecteur sélectionné parmi plusieurs lecteurs.
AUX USB/iPod Recherche rapide (applicable uniquement pour la source USB) Si vous avez beaucoup de fichiers, vous pouvez effectuer une recherche rapide parmi eux. 1 Appuyez sur . 2 Tournez le bouton de volume pour sélectionner un dossier/liste, puis appuyez sur le bouton. 3 Tournez rapidement le bouton de volume pour parcourir la liste rapidement. 4 Tournez le bouton de volume pour choisir un fichier, puis appuyez sur le bouton. La lecture du fichier sélectionné démarre.
Pandora® Vous pouvez écouter Pandora sur le périphérique suivant: Pour Sur la façade Sur la télécommande • KD-X470BHS/KD-X370BTS/KD-X37MBS: iPhone/iPod touch (via Bluetooth ou via la prise d’entrée USB) ou périphérique Android (via Bluetooth) • KD-X270BT/KD-SX26BT: Périphérique Android (via Bluetooth) Lecture/pause Appuyez sur le bouton de volume. Appuyez sur d.
Pandora® Enregistrez un signet sur le morceau actuel Maintenez enfoncé le bouton de volume. “BOOKMARKED” apparaît et l’information est mémorisée sur votre périphérique. • Le signet est disponible sur votre compte Pandora mais pas sur cet appareil.
Spotify Pour Sur la façade Sur la télécommande Lecture/pause Appuyez sur le bouton de volume. Appuyez sur d. Sauter une plage Appuyez sur S*1 / T. Appuyez sur H*1 / I. Sélectionnez un pouce Appuyez sur 2 J / 1 K. vers le haut ou vers le bas *2 Appuyez sur J / K. Démarrer la radio Maintenez enfoncée 5. ( Non disponible ) Lecture répétée*3 Appuyez répétitivement sur 4B. [ALL REPEAT], [ONE REPEAT]*1, [REPEAT OFF] Lecture aléatoire*3 Appuyez répétitivement sur 3 A *1.
Radio SiriusXM® (pour KD-X470BHS/KD-X370BTS/KD-X37MBS) Seul SiriusXM® vous apporte plus de ce que vous aimez écouter, en un seul endroit. Obtenez plus de 140 canaux, y compris de la musique sans pauses publicitaires, le meilleur du sport, les nouvelles, les discussions, les comédies et de les divertissements. Bienvenue dans le monde de la radio satellite. Un tuner SiriusXM Vehicle et un abonnement sont nécessaires. Pour plus d’informations, consultez .
Radio SiriusXM® (pour KD-X470BHS/KD-X370BTS/KD-X37MBS) Sélectionnez un canal mémorisé SmartFavorites et TuneStart™ Appuyez sur une des touches numériques (1 à 6) (ou appuyez sur J / K sur la télécommande). (ou) 1 Appuyez sur . 2 Tournez le bouton de volume pour choisir PRESET, puis appuyez sur le bouton. 3 Tournez le bouton de volume pour choisir un numéro de préréglage, puis appuyez sur le bouton. Lors de l’écoute d’un canal... * 1 Appuyez sur le bouton de volume.
Radio SiriusXM® (pour KD-X470BHS/KD-X370BTS/KD-X37MBS) Pour Sur la façade Sélectionnez un canal SmartFavorite Appuyez sur l’une des touches numériques (1 à 6). 1 Appuyez sur . 2 Tournez le bouton de volume pour choisir PRESET, puis appuyez sur le bouton. 3 Tournez le bouton de volume pour choisir un numéro de préréglage, puis appuyez sur le bouton. Annulation des canaux SmartFavorites 1 Appuyez sur . 2 Tournez le bouton de volume pour choisir PRESET, puis appuyez sur le bouton.
Radio SiriusXM® (pour KD-X470BHS/KD-X370BTS/KD-X37MBS) [CODE SET] 1 2 3 4 5 6 Appuyez sur le bouton de volume pour entrer [NEW CODE]. Tournez le bouton de volume pour sélectionner un numéro. Appuyez sur S / T pour déplacer la position d’entrée. Répétez les étapes 2 et 3 pour entrer un nouveau code secret de 4 chiffres. Appuyez sur le bouton de volume pour valider. Répétez les étapes 2 à 5 pour confirmer le code secret.
Bluetooth® Utilisation d’autres applications 3 Répétez l’étape 2 jusqu’à ce que l’élément souhaité soit sélectionné ou activé. 4 Appuyez sur pour quitter. Pour retourner à l’option de réglage précédente, appuyez sur . Défaut: [XX] [REMOTE APP] [SELECT] [IOS] Bluetooth — Connexion (Pour KD-X470BHS/KD-X370BTS/KD-X37MBS) Sélectionnez le périphérique ([IOS] ou [ANDROID]) pour utiliser l’application.
Bluetooth® Faites le pairage et connectez un périphérique Bluetooth pour la première fois 1 Appuyez sur B SRC pour mettre l’appareil sous tension. 2 Recherchez et sélectionnez le nom de votre récepteur (“KD-X470BHS”/ “KD-X370BTS”/“KD-X37MBS”/“KD-X270BT”/“KD-SX26BT”) sur le périphérique Bluetooth. “BT PAIRING” clignote sur l’affichage. • Pour certains périphériques Bluetooth, il se peut que vous ayez besoin d’entrer le code PIN (numéro d’identification personnel) immédiatement après la recherche.
Bluetooth® Bluetooth — Téléphone portable Les opérations suivantes peuvent différer ou peuvent ne pas être disponibles en fonction du téléphone connecté. Pour Sur la façade Premier appel entrant... Répondre à un appel Réception d’un appel Quand il y a un appel entrant: • KD-X470BHS/KD-X370BTS/KD-X37MBS: Les touches clignotent dans la couleur que vous avez sélectionnée dans [RING COLOR]. (Page 23) KD-X270BT/KD-SX26BT: Les touches clignotent de la façon que vous avez sélectionnée dans [RING ILLUMI].
Bluetooth® *1 Cet ajustement n’affecte pas le volume des autres sources. *2 Maintenez VOL + enfoncé de façon continue pour augmenter le volume sur 15. *3 Les opérations peuvent différer en fonction du périphérique Bluetooth connecté. Défaut: [XX] [SETTINGS] [AUTO ANSWER] [01 SEC] à [30 SEC]: Répond à un appel entrant automatiquement pendant le temps sélectionné (secondes). ; [OFF]: Annulation. Amélioration de la qualité des voix Quand vous parlez au téléphone...
Bluetooth® [RECENT CALL] [PHONEBOOK] [DIAL NUMBER] [VOICE] (Applicable uniquement quand le téléphone prend en charge PBAP.) 1 Appuyez sur le bouton de volume pour sélectionner un nom ou un numéro de téléphone. • “<” indique l’appel reçu, “>” indique un appel passé, “M” indique un appel manqué. • “NO HISTORY” apparaît s’il n’y a pas d’historique d’appels enregistré ou de numéro d’appel. 2 Appuyez sur le bouton de volume pour appeler. (Applicable uniquement quand le téléphone prend en charge PBAP.
Bluetooth® Défaut: [XX] [BT MODE] [AUDIO SELECT] Permet de sélectionner le téléphone ou le périphérique audio à connecter ou déconnecter. “ ” apparaît devant le nom de l’appareil quand il est connecté. “ ” apparaît devant le périphérique de lecture audio actuel. • Vous pouvez connecter un maximum de deux téléphones Bluetooth et un périphérique audio Bluetooth en même temps.
Bluetooth® Le résultat de la connectivité clignote sur l’affichage. “PAIRING OK” et/ou “HANDS-FREE OK” *1 et/ou “AUD.STREAM OK” *2 et/ou “PBAP OK” *3 : Compatible Bluetooth — Audio *1 Compatible avec le Profile mains libres (HFP) *2 Compatible avec le Profile de distribution audio avancé (A2DP) *3 Compatible avec le Profile d’accès au répertoire d’adresses (PBAP) Après 30 secondes, “PAIRING DELETED” apparaît pour indiquer que le pairage a été supprimé, et l’appareil qui le mode de vérification.
AMAZON ALEXA (pour KD-X470BHS/KD-X370BTS/KD-X37MBS) Bluetooth® Pour Sur la façade Lecture répétée Appuyez répétitivement sur 4B. [TRACK REPEAT], [ALL REPEAT], [GROUP REPEAT]*1, [REPEAT OFF] Lecture aléatoire Appuyez répétitivement sur 3A. [GROUP RANDOM]*1, [ALL RANDOM], [RANDOM OFF] Sélectionnez un fichier à partir d’un dossier/liste Commutation entre les périphériques audio Bluetooth Reportez-vous à “Sélectionnez un fichier à lire” à la page 11.
AMAZON ALEXA (pour KD-X470BHS/KD-X370BTS/KD-X37MBS) Option B: Pairage manuel 1 Démarrez l’application mobile Alexa et accédez à l’ongle “Devices (Périphériques)”. 2 Touchez l’icône “ + ” dans le coin supérieur droit. 3 Touchez “Add Device (Ajout de périphérique)”. 4 Touchez “Automotive Accessory (Accessoire automobile)” ou “Headphones (Casque d’écoute)” sur la liste des types de périphérique. 5 Touchez le nom de votre autoradio (“KD-X470BHS” / “KD-X370BTS” / “KD-X37MBS”) et suivez les instructions.
AMAZON ALEXA (pour KD-X470BHS/KD-X370BTS/KD-X37MBS) Réglages audio Démarrez l’écoute Quand Alexa est en attente... 1 Appuyez sur sur l’appareil pour activer Alexa. L’affichage montre: “LISTENING...”. 2 Communiquez avec Alexa via le microphone connecté. (Page 20) 3 Pendant la lecture de musique avec la source ALEXA, vous pouvez réaliser les opérations suivantes. Pour Sur la façade Sur la télécommande 1 Maintenez enfoncée .
Réglages audio [FADER] (Non applicable quand la transition 3 voies est sélectionnée.) [POSITION R15] à [POSITION F15] ([POSITION 00]): Règle la balance de sortie des enceintes avant et arrière. [BALANCE]*4 [POSITION L15] à [POSITION R15] ([POSITION 00]): Règle la balance de [VOLUME ADJUST] [LEVEL –15] à [LEVEL +06] ([LEVEL 00]): Prérègle le niveau de volume [AMP GAIN] [LOW POWER]: Limite le volume maximum à 25.
Réglages audio Réglages de sortie d’enceinte [SPK/PRE OUT] [SOUND EFFECT] [SPACE ENHANCE] (Ne s’applique pas à la source FM/AM.) [SMALL]/[MEDIUM]/[LARGE]: Améliore virtuellement l’espace sonore. ; [OFF]: Annulation. [SND RESPONSE] [LEVEL1]/[LEVEL2]/[LEVEL3]: Rend virtuellement le son plus réaliste. ; [OFF]: Annulation. [SOUND LIFT] [LOW]/[MIDDLE]/[HIGH]: Ajuste virtuellement la position sonore entendue par les enceintes. ; [OFF]: Annulation.
Réglages audio Connexion via les câbles d’enceinte Réglages de transition Vous pouvez aussi connecter les enceintes sans utiliser un amplificateur extérieur mais continuer à utiliser la sortie du caisson de grave avec ces réglages. (Page 45) Signal audio via le fil de l’enceinte arrière Réglage sur [SPK/PRE OUT] L (gauche) R (droite) [REAR/REAR] Sortie des enceintes arrière Sortie des enceintes arrière [REAR/SUB.W]* Sortie des enceintes arrière Sortie des enceintes arrière [SUB.W/SUB.
Réglages audio Options de réglage de la transition 2 voies [SUBWOOFER LPF]*2*3 [SW LPF FRQ] [30HZ]/[40HZ]/[50HZ]/[60HZ]/[70HZ]/[80HZ]/ [90HZ]/[100HZ]/[120HZ]/[150HZ]/[180HZ]/ [220HZ]/[250HZ]/[THROUGH] [SW LPF SLOPE] [–06DB]/[–12DB]/[–18DB]/[–24DB] [SPEAKER SIZE] [FRONT] [SIZE] [TWEETER] [3.5"]/[4"]/[4.75"]/[5"]/[6.5"]/[6.75"]/[7"]/ [4×6]/[5×7]/[6×8]/[6×9]/[7×10] [SW LPF PHASE] [REVERSE] (180°)/ [NORMAL] (0°) [SMALL]/[MIDDLE]/[LARGE]/[NONE] [SW LPF GAIN] (non connecté) [REAR]*1 [3.5"]/[4"]/[4.
Réglages audio [MID RANGE] [HPF FRQ] [30HZ]/[40HZ]/[50HZ]/[60HZ]/[70HZ]/[80HZ]/[90HZ]/ [100HZ]/[120HZ]/[150HZ]/[180HZ]/[220HZ]/[250HZ]/ [THROUGH] [HPF SLOPE] [–06DB]/[–12DB] [LPF FRQ] [1KHZ]/[1.6KHZ]/[2.5KHZ]/[4KHZ]/[5KHZ]/[6.3KHZ]/ [8KHZ]/[10KHZ]/[12.
Réglages d’affichage Réglages audio Détermination automatique du temps de retard Si vous spécifiez la distance à partir de la position d’écoute actuellement réglée pour n’importe quelle enceinte, le temps de retard est calculé automatiquement. 1 Réglez [POSITION] et déterminez la position d’écoute comme point de référence (le point de référence pour [FRONT ALL] est le centre entre les sièges avant droite et gauche). 2 Mesure la distance entre la position de référence et les enceintes.
Réglages d’affichage 1 Maintenez enfoncée . 2 Tournez le bouton de volume pour sélectionner un élément (voir le tableau suivant), puis appuyez sur le bouton. *1 La connexion du fil de commande de l’éclairage est requise. (Page 45) *2 Certains caractères ou symboles n’apparaissent pas correctement (ou un blanc apparaît à leur place). *3 Les fonctionnalités dépendent du type de téléphone utilisé.
Références À propos de l’iPod/iPhone Entretien Nettoyage de l’appareil Essuyez la saleté de la façade avec un chiffon sec au silicone ou un chiffon doux. Nettoyage du connecteur Détachez la façade et nettoyez le connecteur à l’aide d’un coton tige. Faites attention de ne pas endommager le connecteur.
Références À propos d'AMAZON ALEXA • Alexa est un service tiers, et par conséquent les spécifications sont sujettes à changement sans notification préalable. Par conséquent, la compatibilité peut réduite ou certains services ou même tous les services peuvent devenir indisponibles. À propos de la technologie HD Radio™ Changez l’information sur l’affichage Chaque fois que vous appuyez sur , les informations affichées changent.
Références Nom de la source Informations sur l’affichage: Principal (supplémentaire) FM ou AM (Pour KD-X370BTS/KD-X37MBS) Fréquence (Date) Fréquence (Date) avec effet de synchronisation musicale*2 retour au début Pour les stations FM Radio Broadcast Data System uniquement: Nom de la station/Type de programme (Date) Nom de station/Type de programme (Date) avec effet de synchronisation musicale*2 Radio texte (Date) Radio texte+ (Radio texte+) Titre de morceau (Artiste) Titre de morceau (Date) Fréquence (Da
Guide de dépannage Nom de la source Informations sur l’affichage: Principal SPOTIFY BT Titre contextuel Titre contextuel avec effet de synchronisation musicale* Titre de morceau Artiste Titre d’album Durée de lecture Date retour au début BT AUDIO Titre du morceau/Artiste Titre du morceau/Artiste avec effet de synchronisation musicale* Titre d’album/Artiste Durée de lecture Date retour au début AUX Nom de la source Nom de la source avec effet de synchronisation musicale* Date retour au début * Penda
Guide de dépannage • Vérifiez si le périphérique USB connecté est compatible avec cet appareil et assurez-vous que le système de fichiers est dans un format compatible. (Page 37) • Reconnectez le périphérique USB. “UNRESPONSIVE DEVICE” apparaît. Assurez-vous que le périphérique USB n’est pas défaillant et reconnectez-le. “USB HUB IS NOT SUPPORTED” apparaît. Cet appareil ne peut pas prendre en charge un périphérique USB connectez via un hub USB. “CANNOT PLAY” apparaît.
Guide de dépannage Bluetooth® 42 Remède “CH LOCKED LOCK CODE?” Le canal sélectionné est verrouillé. Entrez le code secret correct pour déverrouiller. (Page 18) “CHAN UNSUB” Le canal sélectionné ne fait pas parti de l’abonnement. Appelez le 1-866-635-2349 aux États-Unis ou le 1-877-438-9677 au Canada pour vous abonner. (Page 16) “CH UNAVAIL” Le canal sélectionné n’est pas disponible. Pour obtenir plus d’informations sur les canaux disponibles SiriusXM, consultez .
Installation/Connexion Guide de dépannage AMAZON ALEXA Bluetooth® Symptôme Remède “H/W ERROR” Réinitialiser l’appareil et essayez de nouveau l’opération. Si “H/W ERROR” apparaît de nouveau, consultez le centre de service le plus proche. “SWITCHING NG” Les téléphones connectés ne prennent peut-être pas en charge la fonction de commutation de téléphone. La connexion Bluetooth entre le périphérique Bluetooth et l’appareil est instable.
Installation/Connexion Liste des pièces pour l’installation Installation de l’appareil (montage encastré) (A) Façade (×1) (B) Plaque de garniture (×1) (C) Manchon de montage (×1) (D) Faisceau de fils (×1) Réalisez les connexions nécessaires. (Page 45) Crochet sur le côté supérieur Orientez la plaque de garniture de la façon illustrée avant la fixation. Tableau de bord de votre voiture (E) Clé d’extraction (×2) Tordez les languettes appropriées pour maintenir le manchon en place.
Installation/Connexion Connexions IMPORTANTES Nous recommandons d’installer l’appareil en utilisant un harnais de câblage en vente dans le commerce recommandé spécifiquement pour votre voiture et, pour votre sécurité, de laisser ce travail a des professionnels. Consultez votre revendeur autoradio. Borne de l’antenne Tableau de bord du véhicule Fusible (10 A) Bleu clair/jaune Faisceau de câbles de l’usine (véhicule) À l’adaptateur de télécommande volant Joignez les fils de même couleur ensemble.
Installation/Connexion Connexion d’appareils extérieurs Connectez les amplificateurs extérieurs via les prises de sortie Cordon de signal (non fournie) JVC Amplificateur* Prises de sortie Fil de télécommande (non fournie) Au fil de télécommande (bleu/blanc) du faisceau de fils. (Page 45) No.
Spécifications KD-X470BHS: Sensibilité utilisable (S/B = 26 dB) 7,2 dBf (0,63 μV/75 Ω) Sensibilité utilisable (S/B = 26 dB) 8,2 dBf (0,71 μV/75 Ω) Seuil de sensibilité (DIN S/B = 46 dB) 15,2 dBf (1,58 μV/75 Ω) Seuil de sensibilité (DIN S/B = 46 dB) 17,2 dBf (2,0 μV/75 Ω) Réponse en fréquence (±3 dB) 30 Hz — 15 kHz Taux de Signal/Bruit (MONO) 68 dB Séparation stéréo (1 kHz) 40 dB 87,9 MHz — 107,9 MHz (pas de 200 kHz) 75 dB Plage de fréquences 530 kHz — 1 700 kHz (pas de 10 kHz) 531 kHz — 1 6
Spécifications Taux de Signal/Bruit (1 kHz) KD-X470BHS: 98 dB 93 dB Séparation des canaux KD-X470BHS: 92 dB Bluetooth USB KD-X370BTS/KD-X37MBS/KD-X270BT/KD-SX26BT: 89 dB 48 Décodage MP3 Compatible avec MPEG-1/2 Audio Layer-3 Décodage WMA Compatible avec Windows Media Audio Décodage AAC KD-X470BHS/KD-X370BTS/KD-X37MBS: Fichiers AAC-LC “.aac”, “.m4a” Décodage WAV PCM linéaire Décodage FLAC Fichier FLAC jusqu’à 24 bits/96 kHz Version Bluetooth V4.
JS_JVC_KD_X470BHS_K_FR.
Contenido Antes del uso ............................................................................................ 3 Referencias ............................................................................................. 37 Puntos básicos ......................................................................................... 4 Mantenimiento Procedimientos iniciales ........................................................................
Antes del uso IMPORTANTE • Antes de utilizar este producto y para asegurar su uso correcto, lea completamente este manual. En especial, lea y acate las Advertencias y Precauciones incluidas en este manual. • Guarde el manual en un lugar seguro y accesible para futuras consultas. ADVERTENCIA • No utilice ninguna función que pueda desviar su atención mientras está conduciendo el vehículo. • No ingiera la pila, existe riesgo de quemaduras por productos químicos.
Puntos básicos Placa frontal Fijar KD-X470BHS/KD-X370BTS/KD-X37MBS: Rueda de volumen Ventanilla de visualización* Desmontar Botón de liberación Cómo reinicializar KD-X270BT/KD-SX26BT: Reinicialice la unidad en menos de 5 segundos después de haber extraído la placa frontal. * Solo para fines ilustrativos. Para En la placa frontal Encender la unidad Pulse B SRC. • Pulse y mantenga pulsado para apagar la unidad. Ajustar el volumen Gire la rueda de volumen.
Procedimientos iniciales Puntos básicos Mando a distancia (RM-RK52) (excepto para KD-SX26BT) Esta unidad puede controlarse a distancia mediante un mando a distancia adquirido a opción. Sensor remoto (DO lo exponga a la luz solar brillante.) 1 Cancele la demostración Cuando enciende la unidad por primera vez (o [FACTORY RESET] está ajustado a [YES], consulte la página 6), en la pantalla se muestra: “CANCEL DEMO” “PRESS” “VOLUME KNOB” 1 Pulse la rueda de volumen.
Procedimientos iniciales 9 Pulse para salir. Para volver al elemento de ajuste anterior, pulse 3 [F/W UPDATE] . [UPDATE SYSTEM]/[UPDATE HD] [F/W UP xxxx]/ [F/W UP Vxx] Realice los ajustes básicos 1 Pulse y mantenga pulsado . 2 Gire la rueda de volumen para seleccionar un elemento (consulte la siguiente tabla) y, a continuación, pulse la rueda. 3 Repita el paso 2 hasta que se seleccione o active el elemento deseado. 4 Pulse para salir.
Sintonizador HD Radio™ (para KD-X470BHS) Puede sintonizar tanto transmisiones convencionales y emisiones de HD Radio. • Para encontrar emisoras de HD Radio en su área, visite . 2 Gire la rueda de volumen para seleccionar un número de preajuste y, a continuación, pulse la rueda. Aparece “MEMORY” una vez que la emisora o el canal esté almacenado. Seleccione una emisora o canal guardado Busca una emisora o un canal de radio 1 Pulse B SRC repetidamente para seleccionar FM o AM.
Sintonizador HD Radio™ (para KD-X470BHS) Visualizar los mensajes de alerta de emergencia recibidos 4 Define el día*2 y la hora de activación. Al finalizar, el indicador “M” se ilumina. Los mensajes de alerta de emergencia recibidos se guardan en la Lista de mensajes de alerta para que usted pueda comprobarlos posteriormente. Mientras escucha la fuente HD RADIO... El temporizador de la radio no se activará en los siguientes casos. • La unidad está apagada.
Radio (para KD-X370BTS/KD-X37MBS/KD-X270BT/KD-SX26BT) Seleccione una emisora almacenada Pulse uno de los botones numéricos (1 a 6). (o) 1 Pulse . 2 Gire la rueda de volumen para seleccionar un número de preajuste y, a continuación, pulse la rueda. Otros ajustes Búsqueda de una emisora 1 Pulse B SRC repetidamente para seleccionar FM o AM. 2 Pulse S / T (o pulse H / I en el mando a distancia) para la búsqueda automática de emisoras.
Radio (para KD-X370BTS/KD-X37MBS/KD-X270BT/KD-SX26BT) [SSM] [SSM 01–06]/[SSM 07–12]/[SSM 13–18]: Configura automáticamente hasta 18 emisoras para FM. “SSM” deja de destellar cuando se almacenan las primeras 6 emisoras. Seleccione [SSM 07–12]/[SSM 13–18] para almacenar las 12 emisoras siguientes. [IF BAND] [AUTO]: Aumenta la selectividad del sintonizador para reducir las interferencias con emisoras FM adyacentes. (Se puede perder el efecto estéreo.
USB/iPod Seleccionar Music drive Operaciones básicas Pulse 5 MODE repetidamente mientras está en una fuente USB. Se reproducirán las canciones almacenadas en la siguiente unidad. • Memoria interna o externa seleccionada de un smartphone (Clase de almacenamiento masivo). • Unidad seleccionada de un dispositivo de múltiples unidades.
AUX USB/iPod Búsqueda rápida (aplicable solo para fuente USB) Si existen numerosos archivos, puede realizar una búsqueda rápida. 1 Pulse . 2 Gire la rueda de volumen para seleccionar una carpeta/lista y, a La música de un reproductor de audio portátil se puede escuchar a través de una toma de entrada auxiliar. Preparativos: Seleccione [ON] para [BUILT-IN AUX] en [SOURCE SELECT]. (Página 6) continuación, pulse la rueda. 3 Gire la rueda de volumen rápidamente para navegar por la lista con rapidez.
Pandora® Puede escuchar Pandora en los siguientes dispositivos: • KD-X470BHS/KD-X370BTS/KD-X37MBS: iPhone/iPod touch (a través de Bluetooth o a través del terminal de entrada USB) o dispositivo Android (a través de Bluetooth) • KD-X270BT/KD-SX26BT: Dispositivo Android (a través de Bluetooth) Preparativos: • Instale la última versión de la aplicación Pandora en su dispositivo (iPhone/ iPod touch o dispositivo Android) y, a continuación, cree una cuenta e inicie sesión en Pandora.
Pandora® Para marcar la información sobre la canción actual Pulse y mantenga pulsada la rueda de volumen. Aparece “BOOKMARKED” y la información se almacena en su dispositivo. • El marcador está disponible en su cuenta de Pandora pero no en esta unidad.
Spotify Para En la placa frontal En el mando a distancia Reproducción/pausa Pulse la rueda de volumen. Pulse d. Saltar una pista Pulse S*1 / T. Pulse H*1 / I. Seleccione pulgar Pulse 2 J / 1 K. arriba o pulgar abajo *2 Pulse J / K. Iniciar la radio Pulse y mantenga pulsado 5. ( No disponible ) Repetir reproducción*3 Pulse 4B repetidamente. Reproducción aleatoria*3 [ALL REPEAT], [ONE REPEAT]*1, [REPEAT OFF] Pulse 3 A repetidamente *1.
Radio SiriusXM® (para KD-X470BHS/KD-X370BTS/KD-X37MBS) Solo SiriusXM® ofrece todo lo que quiere escuchar, en un solo lugar. Con más de 140 canales, incluida música sin publicidad además de lo mejor en deportes, noticias, entrevistas, comedia y entretenimiento. Bienvenido al mundo de la radio satelital. Se requiere un sintonizador para vehículos SiriusXM y una suscripción. Para obtener más información, visite .
Radio SiriusXM® (para KD-X470BHS/KD-X370BTS/KD-X37MBS) Seleccionar un canal presintonizado SmartFavorites y TuneStart™ Pulse uno de los botones numéricos (1 a 6) (o pulse J / K en el mando a distancia). (o) 1 Pulse . 2 Gire la rueda de volumen para seleccionar PRESET y, a continuación, pulse la rueda. 3 Gire la rueda de volumen para seleccionar un número de preajuste y, a continuación, pulse la rueda. SiriusXM Replay™ Mientras escucha un canal... 1 Pulse la rueda de volumen.
Radio SiriusXM® (para KD-X470BHS/KD-X370BTS/KD-X37MBS) Para En la placa frontal Seleccionar un canal SmartFavorite guardado Pulse uno de los botones numéricos (1 a 6). 1 Pulse . 2 Gire la rueda de volumen para seleccionar PRESET y, a continuación, pulse la rueda. 3 Gire la rueda de volumen para seleccionar un número de preajuste y, a continuación, pulse la rueda. Cancelar los canales SmartFavorites 1 Pulse . 2 Gire la rueda de volumen para seleccionar PRESET y, a continuación, pulse la rueda.
Radio SiriusXM® (para KD-X470BHS/KD-X370BTS/KD-X37MBS) [CODE SET] [LOCK SETTING] 1 2 3 4 Pulse la rueda de volumen para ingresar en [NEW CODE]. Gire la rueda de volumen para seleccionar un número. Pulse S / T para mover la posición de ingreso. Repita los pasos 2 y 3 para ingresar un nuevo código de acceso de 4 dígitos. 5 Pulse la rueda de volumen para confirmar. 6 Repita los pasos 2 a 5 para volver a confirmar el código de acceso.
Bluetooth® Uso de otras aplicaciones 3 Repita el paso 2 hasta que se seleccione o active el elemento deseado. 4 Pulse para salir. Para volver al elemento de ajuste anterior, pulse . Predeterminado: [XX] [REMOTE APP] [SELECT] (Para KD-X470BHS/KD-X370BTS/KD-X37MBS) Seleccione el dispositivo ([IOS] o [ANDROID]) en el que desea ejecutar la aplicación. [IOS] [YES]: Seleccione iPhone/iPod touch para usar la aplicación a través de Bluetooth o a través del terminal de entrada USB conectado.
Bluetooth® Emparejar y conectar por primera vez un dispositivo Bluetooth 1 Pulse B SRC para encender la unidad. 2 Busque y seleccione el nombre de su receptor (“KD-X470BHS”/ “KD-X370BTS”/“KD-X37MBS”/“KD-X270BT”/“KD-SX26BT”) en el dispositivo Bluetooth. “BT PAIRING” parpadea en la pantalla. • En el caso de algunos dispositivos Bluetooth, puede ser necesario ingresar el número de identificación personal (código PIN) inmediatamente después de la búsqueda.
Bluetooth® Bluetooth — Teléfono móvil Las siguientes operaciones pueden diferir o no estar disponibles dependiendo del teléfono que se haya conectado. Para En la placa frontal Primera llamada entrante... Contestar una llamada Recibir una llamada Cuando se recibe una llamada entrante: • KD-X470BHS/KD-X370BTS/KD-X37MBS: Los botones parpadean en el color que ha seleccionado en [RING COLOR].
Bluetooth® *1 Este ajuste no influirá en el volumen del resto de las fuentes. *2 Pulse y mantenga pulsado VOL + para aumentar continuamente el volumen a 15. *3 Las operaciones pueden variar dependiendo del dispositivo Bluetooth conectado. Predeterminado: [XX] [SETTINGS] [AUTO ANSWER] [01 SEC] a [30 SEC]: Contesta automáticamente una llamada entrante en el tiempo seleccionado (en segundos). ; [OFF]: Se cancela. Mejorar la calidad de voz Mientras habla por teléfono...
Bluetooth® [RECENT CALL] [PHONEBOOK] [DIAL NUMBER] [VOICE] (Solo si el teléfono es compatible con PBAP.) 1 Pulse la rueda de volumen para seleccionar un nombre o un número de teléfono. • “<” indica llamada recibida, “>” indica llamada realizada, “M” indica llamada perdida. • El mensaje “NO HISTORY” aparece si no existe un historial de llamadas o número de llamada registrado. 2 Pulse la rueda de volumen para llamar. (Solo si el teléfono es compatible con PBAP.
Bluetooth® Predeterminado: [XX] [BT MODE] [PHONE SELECT] [AUDIO SELECT] [DEVICE DELETE] Selecciona el teléfono o el dispositivo de audio que desea conectar o desconectar. Al conectarse, aparece “ ” delante del nombre del dispositivo. Aparece “ ” delante del actual dispositivo de audio para reproducción. • Solo se puede conectar un máximo de dos teléfonos con Bluetooth y un dispositivo de audio con Bluetooth a la vez.
Bluetooth® El resultado de la conectividad parpadea en la pantalla. “PAIRING OK” y/o “HANDS-FREE OK” *1 y/o “AUD.
AMAZON ALEXA (para KD-X470BHS/KD-X370BTS/KD-X37MBS) Bluetooth® Para En la placa frontal Repetir reproducción Pulse 4B repetidamente. [TRACK REPEAT], [ALL REPEAT], [GROUP REPEAT]*1, [REPEAT OFF] Reproducción aleatoria Pulse 3 A repetidamente. Seleccionar un archivo de una carpeta/lista Consulte el apartado “Seleccione el archivo que desea reproducir” que aparece en la página 11. Cambiar entre los dispositivos de audio Bluetooth conectados Pulse 5.
AMAZON ALEXA (para KD-X470BHS/KD-X370BTS/KD-X37MBS) Opción B: Emparejamiento manual 1 Inicie la aplicación móvil Alexa y pase a la pestaña “Devices (Dispositivos)”. 2 Toque el icono “ + ” en la esquina derecha superior. 3 Toque “Add Device (Añadir dispositivo)”. 4 Toque “Automotive Accessory (Accesorio automotriz)” o “Headphones (Auriculares)” en la lista de tipos de dispositivos. 5 Toque el nombre de su receptor (“KD-X470BHS” / “KD-X370BTS” / “KD-X37MBS”) y siga las instrucciones.
AMAZON ALEXA (para KD-X470BHS/KD-X370BTS/KD-X37MBS) Ajustes de audio Comience a escuchar Cuando Alexa está en estado de inactividad... 1 Para activar Alexa, pulse en la unidad. En la pantalla se muestra: “LISTENING...”. 2 Comuníquese con Alexa a través del micrófono conectado. (Página 20) 3 Puede realizar las siguientes operaciones durante la reproducción de música de la fuente ALEXA: Para En la placa frontal En el mando a distancia 1 Pulse y mantenga pulsado .
Ajustes de audio [PRO EQ] Configura sus propios ajustes de sonido para cada fuente. • Los ajustes se guardan en [USER] in [PRESET EQ]. • Los ajustes realizados afectan a los ajustes actuales de [EASY EQ]. [62.5HZ] [FADER] (No aplicable si se ha seleccionado crossover de 3 vías.) [POSITION R15] a [POSITION F15] ([POSITION 00]): Ajusta el balance de salida de los altavoces delanteros y traseros.
Ajustes de audio Ajustes salida altavoz [SPK/PRE OUT] [SOUND EFFECT] [SPACE ENHANCE] (No aplicable para la fuente FM/AM.) [SMALL]/[MEDIUM]/[LARGE]: Aumenta virtualmente el espacio acústico. ; [OFF]: Se cancela. [SND RESPONSE] [LEVEL1]/[LEVEL2]/[LEVEL3]: Hace que el sonido sea virtualmente más realista. ; [OFF]: Se cancela. [SOUND LIFT] [LOW]/[MIDDLE]/[HIGH]: Realiza el ajuste virtual de la posición de escucha del sonido emitido por los altavoces. ; [OFF]: Se cancela.
Ajustes de audio Conexión a través de los cables de los altavoces Ajustes de crossover También puede conectar los altavoces sin utilizar un amplificador externo, pero aún así podrá disfrutar de la salida del subwoofer mediante estos ajustes. (Página 45) A continuación se describen los elementos de ajuste disponibles para crossover de 2 vías y crossover de 3 vías.
Ajustes de audio Elementos de ajuste de crossover de 2 vías [SUBWOOFER LPF]*2*3 [SW LPF FRQ] [30HZ]/[40HZ]/[50HZ]/[60HZ]/[70HZ]/[80HZ]/ [90HZ]/[100HZ]/[120HZ]/[150HZ]/[180HZ]/ [220HZ]/[250HZ]/[THROUGH] [SW LPF SLOPE] [–06DB]/[–12DB]/[–18DB]/[–24DB] [SPEAKER SIZE] [FRONT] [SIZE] [TWEETER] [3.5"]/[4"]/[4.75"]/[5"]/[6.5"]/[6.75"]/[7"]/ [4×6]/[5×7]/[6×8]/[6×9]/[7×10] [SW LPF PHASE] [REVERSE] (180°)/ [NORMAL] (0°) [SMALL]/[MIDDLE]/[LARGE]/[NONE] [SW LPF GAIN] (no conectado) [REAR]*1 [3.5"]/[4"]/[4.
Ajustes de audio [MID RANGE] [HPF FRQ] [30HZ]/[40HZ]/[50HZ]/[60HZ]/[70HZ]/[80HZ]/[90HZ]/ [100HZ]/[120HZ]/[150HZ]/[180HZ]/[220HZ]/[250HZ]/ [THROUGH] [HPF SLOPE] [–06DB]/[–12DB] [LPF FRQ] [1KHZ]/[1.6KHZ]/[2.5KHZ]/[4KHZ]/[5KHZ]/[6.3KHZ]/ [8KHZ]/[10KHZ]/[12.5KHZ]/[THROUGH] [LPF SLOPE] [–06DB]/[–12DB] La Alineación de Tiempo Digital ajusta el tiempo de retardo de la salida de los altavoces creando un entorno más adecuado para su vehículo.
Ajustes de visualización Ajustes de audio Cómo determinar automáticamente el tiempo de retraso Si especifica la distancia a cada altavoz desde la posición de escucha actualmente establecida, el tiempo de retraso se calcula automáticamente. 1 Configure [POSITION] y determine la posición de escucha como punto de referencia (el punto de referencia para [FRONT ALL] estará en el centro entre la derecha e izquierda de los asientos delanteros).
Ajustes de visualización 1 Pulse y mantenga pulsado . 2 Gire la rueda de volumen para seleccionar un elemento (consulte la siguiente tabla) y, a continuación, pulse la rueda. *1 Se requiere la conexión del cable de control de iluminación. (Página 45) *2 Algunos caracteres o símbolos no se mostrarán correctamente (o aparecerán en blanco). *3 La funcionalidad depende del tipo de teléfono en uso.
Referencias Acerca del iPod/iPhone Mantenimiento Limpieza de la unidad Limpie la suciedad de la placa frontal con un paño suave o paño de silicona seco. Limpieza del conector Desmonte la placa frontal y limpie el conector con un palillo de algodón. Tenga cuidado de no dañar el conector.
Referencias Acerca de AMAZON ALEXA • Debido a que Alexa es un servicio de terceros, las especificaciones se encuentran sujetas a cambios sin previo aviso. Por consiguiente, la compatibilidad podría verse afectada, y alguno o todos los servicios podrían dejar de estar disponibles. Acerca de la Tecnología HD Radio™ Cambiar la información en pantalla Cada vez que pulsa , la información en pantalla cambia.
Referencias Nombre de la fuente Información en pantalla: Principal (suplementaria) FM o AM (Para KD-X370BTS/KD-X37MBS) Frecuencia (Fecha) Frecuencia (Fecha) con efecto de sincronización de música*2 vuelta al comienzo Solo para emisoras del FM Radio Broadcast Data System: Nombre de la emisora/Tipo de programa (Fecha) Nombre de la emisora/Tipo de programa (Fecha) con efecto de sincronización de música*2 Radio texto (Fecha) Radio texto+ (Radio texto+) Título de la canción (Artista) Título de la canción (Fec
Localización y solución de problemas Nombre de la fuente Información en pantalla: Principal SPOTIFY BT Título del contexto Título del contexto con efecto de sincronización de música* Título de la canción Artista Título del álbum Tiempo de reproducción Fecha vuelta al comienzo BT AUDIO Título de la canción/Artista Título de la canción/Artista con efecto de sincronización de música* Título del álbum/Artista Tiempo de reproducción Fecha vuelta al comienzo AUX Nombre de la fuente Nombre de la fuente con
Localización y solución de problemas Síntoma Solución Síntoma Solución “ADD ERROR” Fracasó la creación de la nueva emisora. “CHK DEVICE” Verifique la aplicación Pandora en su dispositivo. “NO SKIPS” Se ha llegado al límite de saltos. Aparece “UNRESPONSIVE DEVICE”. Asegúrese de que no exista ningún fallo de funcionamiento en el dispositivo USB y vuelva a conectarlo. “NO STATIONS” No se pueden encontrar emisoras. Aparece “USB HUB IS NOT SUPPORTED”.
Localización y solución de problemas Bluetooth® 42 Solución Síntoma Solución • Ajuste la posición del micrófono. (Página 20) • Verifique el ajuste [ECHO CANCEL]. (Página 23) Se ha seleccionado un canal al que no está suscrito. Para suscribirse, llame al 1-866-635-2349, en EE. UU., o al 1-877-438-9677, en Canadá. (Página 16) Se escucha ruido o eco durante una conversación telefónica. La calidad del sonido del teléfono es baja. “CH UNAVAIL” Se ha seleccionado un canal que no está disponible.
Localización y solución de problemas AMAZON ALEXA Bluetooth® Síntoma Solución “H/W ERROR” Reinicialice la unidad y vuelva a intentar la operación. Si vuelve a aparecer “H/W ERROR”, consulte al centro de servicio más cercano. “SWITCHING NG” Los teléfonos conectados no son compatibles con la función cambio de teléfono. La conexión Bluetooth entre el dispositivo Bluetooth y la unidad es inestable. Elimine de la unidad el dispositivo Bluetooth registrado no utilizado.
Instalación/Conexión Lista de piezas para la instalación Instalación de la unidad (montaje en el tablero) (A) Placa frontal (×1) (B) Placa embellecedora (×1) (C) Manguito de montaje (×1) (D) Mazo de conductores (×1) Prepare el cableado necesario. (Página 45) Gancho en el lado superior Antes del montaje, oriente la placa embellecedora tal como se muestra en la ilustración.
Instalación/Conexión Conexión del cableado IMPORTANTE Se recomienda instalar la unidad con un mazo de cables disponible en el mercado que sea adecuado para su automóvil y, para fines de seguridad, deje esta tarea en manos de profesionales. Consulte con un distribuidor de productos de audio para automóviles.
Instalación/Conexión Conecte los componentes externos Conecte los amplificadores externos a través de los terminales de salida Cable de señal (no suministrado) Amplificador de JVC* Terminales de salida Cable remoto (no suministrado) No. Pieza Al cable remoto (azul/blanco) del mazo de conductores.
Especificaciones KD-X470BHS: FM Digital AM Sensibilidad útil (Relación señal/ruido = 26 dB) Sensibilidad de silenciamiento (DIN S/N = 46 dB) Gama de frecuencias 87,9 MHz — 107,9 MHz (pasos de 200 kHz) 87,5 MHz — 108,0 MHz (pasos de 50 kHz) 7,2 dBf (0,63 μV/75 Ω) Sensibilidad útil (Relación señal/ruido = 26 dB) 8,2 dBf (0,71 μV/75 Ω) 15,2 dBf (1,58 μV/75 Ω) Sensibilidad de silenciamiento (DIN S/N = 46 dB) 17,2 dBf (2,0 μV/75 Ω) Respuesta de frecuencia (±3 dB) 30 Hz — 15 kHz Relación señal a rui
Especificaciones Relación señal a ruido (1 kHz) KD-X470BHS: 98 dB 93 dB Separación de canales KD-X470BHS: 92 dB Bluetooth USB KD-X370BTS/KD-X37MBS/KD-X270BT/KD-SX26BT: 89 dB 48 MP3 decodificado Compatible con MPEG-1/2 Audio Layer-3 WMA decodificado Compatible con Windows Media Audio AAC decodificado KD-X470BHS/KD-X370BTS/KD-X37MBS: Archivos AAC-LC “.aac”, “.m4a” WAV decodificado PCM lineal FLAC decodificado Archivo FLAC, hasta 24bit /96 kHz Versión Bluetooth V4.
JS_JVC_KD_X470BHS_K_SP.
• Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. • HD Radio Technology manufactured under license from iBiquity Digital Corporation. U.S. and Foreign Patents. For patents see http://dts.com/patents. HD Radio™ and the HD, HD Radio, and “ARC” logos are registered trademarks or trademarks of iBiquity Digital Corporation in the United States and/or other countries.