ENGLISH FRANÇAIS ESPAÑOL KD-R975BTS / KD-R970BTS / KD-R97MBS / KD-R875BTS / KD-R870BT / KD-R770BT / KD-RD97BT / KD-RD87BT CD RECEIVER INSTRUCTION MANUAL RÉCEPTEUR CD MANUEL D’INSTRUCTIONS RECEPTOR CON CD MANUAL DE INSTRUCCIONES For customer Use: Enter below the Model No. and Serial No. which are located on the top or bottom of the cabinet. Retain this information for future reference. Model No. Serial No. B5A-0813-10 [K] JS_JVC_KD_R975BTS_K_C.
CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety. JVC KENWOOD Corporation 2967-3, ISHIKAWA-MACHI, HACHIOJI-SHI, TOKYO, JAPAN THIS PRODUCT COMPLIES WITH DHHS RULES 21CFR SUBCHAPTER J IN EFFECT AT DATE OF MANUFACTURE.
IC (Industry Canada) Notice This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The term “IC: ” before the certification/ registration number only signifies that the Industry Canada technical specification were met.
SOFTWARE LICENSE AGREEMENT The software embedded in the Product (hereinafter the "Licensed Software") provided by Licensor is copyrighted to or sublicensable by the Licensor, and this Agreement provides for the terms and conditions which Users shall follow in order to use the Licensed Software. The User shall use the Licensed Software by agreeing with the terms of this Software License Agreement.
Article 8 Termination In case the User falls under any of the events described in the following items, the Licensor may immediately terminate this Agreement or claim that the User compensates for the damage incurred by the Licensor due to such event: (1) when the User violated any provision of this Agreement; or (2) when a petition has been filed against the User for an attachment, provisional attachment, provisional disposition or any other compulsory execution.
CONTENTS BEFORE USE BEFORE USE 2 IMPORTANT BASICS 3 GETTING STARTED 4 • To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe Warning and Caution in this manual. • Please keep the manual in a safe and accessible place for future reference. 1 Cancel the demonstration 2 Set the clock 3 Set the basic settings Warning Do not operate any function that takes your attention away from safe driving.
BASICS Faceplate Remote control (RM-RK52) Volume knob Loading slot Display window KD-R97MBS can be remotely controlled with an optionally purchased remote control. Remote sensor (Do not expose to bright sunlight.) TI KD-R975BTS: USB cable from the rear of the unit Detach button Attach ST How to replace the battery How to reset Detach Pull out the insulation sheet when using for the first time. Press the switch twice within 5 seconds after detaching the faceplate.
GETTING STARTED 3 Set the basic settings . 1 Press and hold 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected or activated. 4 Press to exit. 1 Cancel the demonstration When you turn on the power for the first time (or [FACTORY RST] is set to [YES]), the display shows: “CANCEL DEMO” “PRESS” “VOLUME KNOB” 1 Press the volume knob. [YES] is selected for the initial setup. 2 Press the volume knob again.
GETTING STARTED RADIO CLOCK CLOCK SYNC AUTO: The clock time is automatically set using the Clock Time (CT) data in FM Radio Broadcast Data System signal. ; OFF: Cancels. CLOCK DISP ON: The clock time is shown on the display even when the unit is turned off. ; OFF: Cancels. ENGLISH Select the display language for menu and music information if applicable. By default, ENGLISH is selected. ESPANOL “ST” lights up when receiving an FM stereo broadcast with sufficient signal strength.
RADIO Other settings . 1 Press and hold 2 Turn the volume knob to select [TUNER], then press the knob. 3 Turn the volume knob to select an item (see the following table), then press the knob. 4 Repeat step 3 until the desired item is selected/activated or follow the instructions stated on the selected item. 5 Press to exit. . To return to the previous setting item, press Default: XX RADIO TIMER Turns on the radio at a specific time regardless of the current source.
CD / USB / iPod / ANDROID Start playback The source changes automatically and playback starts. CD Eject disc Label side Selectable source: • KD-R975BTS: CD/ USB FRONT/ USB REAR/ IPOD FRONT/ IPOD REAR/ ANDROID-F/ ANDROID-R • KD-R970BTS / KD-R97MBS / KD-R875BTS / KD-R870BT / KD-RD97BT / KD-RD87BT: CD/ USB/ USB-IPOD/ ANDROID • KD-R770BT: CD/ USB/ ANDROID USB input terminal USB USB 2.
CD / USB / iPod / ANDROID Select control mode While in IPOD FRONT/ IPOD REAR/ USB-IPOD source, press repeatedly. HEAD MODE: Control iPod from this unit. IPHONE MODE: Control iPod using the iPod itself. However, you can still play/ pause or file skip from this unit. Select a file from a folder/list . 1 Press 2 Turn the volume knob to select a folder/list, then press the knob. 3 Turn the volume knob to select a file, then press the knob.
Pandora® Preparation: Install the latest version of the Pandora application on your device (iPhone/ iPod touch), then create an account and log in to Pandora. • Select [ON] for [PANDORA] in [SRC SELECT]. ( 4) To On the faceplate On the remote control Playback / pause Press the volume knob. Press Skip a track Press T. Press I. KD-R770BT: You can listen to Pandora via Bluetooth connection. ( 14, 19) Thumbs up or thumbs down*2 Press Start listening 1 Open the Pandora application on your device.
iHeartRadio® Preparation: Install the latest version of iHeartAuto application on your device (iPhone/ iPod touch), then create an account and log in to iHeartRadio. • Select [ON] for [IHEART] in [SRC SELECT]. ( 4) KD-R770BT: You can listen to iHeartRadio via Bluetooth connection. ( 14, 19) Start listening 1 Open the iHeartAuto application on your device. 2 Connect your device to the USB input terminal. To On the faceplate On the remote control Playback / pause Press the volume knob.
SiriusXM® Radio (for KD-R975BTS / KD-R970BTS / KD-R97MBS / KD-R875BTS) Only SiriusXM® brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world of satellite radio. A SiriusXM Vehicle Tuner and Subscription are required. For more information, visit www.siriusxm.com. Start listening 1 Press 2 Press .
SiriusXM® Radio (for KD-R975BTS / KD-R970BTS / KD-R97MBS / KD-R875BTS) When you select a SmartFavorites channel, you can rewind and replay up to 30 minutes of any of the missed news, talk, sports or music content. • Playback starts from the beginning of the song if [TUNE START] is set to [ON] ( 13) for most music channels stored as a SmartFavorite. SiriusXM Replay™ 1 Press the volume knob. “ ” lights up and the unit memorizes this paused position. 2 Press the volume knob to start Replay.
SiriusXM® Radio (for KD-R975BTS / KD-R970BTS / KD-R97MBS / KD-R875BTS) SiriusXM settings . 1 Press and hold 2 Turn the volume knob to select [SIRIUS XM], then press the knob. 3 Turn the volume knob to select an item (see the following table), then press the knob. 4 Repeat step 3 until the desired item is selected/activated or follow the instructions stated on the selected item. 5 Press to exit. .
BLUETOOTH® BLUETOOTH — Connection Supported Bluetooth profiles – Hands-Free Profile (HFP) – Advanced Audio Distribution Profile (A2DP) – Audio/Video Remote Control Profile (AVRCP) – Serial Port Profile (SPP) – Phonebook Access Profile (PBAP) Supported Bluetooth codecs – Sub Band Codec (SBC) – Advanced Audio Coding (AAC) Connect the microphone Rear panel Microphone (supplied) Microphone input jack*1 Pair and connect a Bluetooth device for the first time 1 Press to turn on the unit.
BLUETOOTH® Auto Pairing BLUETOOTH — Mobile phone When you connect the following device to the USB input terminal, pairing request (via Bluetooth) is automatically activated. KD-R770BT: Android device Other models: iPhone/ iPod touch/ Android device Receive a call Press the volume knob to pair once you have confirmed the device name. Automatic pairing request is activated only if: – Bluetooth function of the connected devcie is turned on. – [AUTO CNNT] is set to [ON].
BLUETOOTH® To On the faceplate While talking on the first incoming call... Answer another incoming call and hold the current call Press knob. Reject another incoming call Press and hold the volume knob. or the volume or ( Not available ) ( Not available ) While having two active calls... Press and hold the volume knob.
BLUETOOTH® Make a call using voice recognition Make a call You can make a call from the call history, phonebook, or dialing the number. Call by voice is also possible if your mobile phone has the feature. 1 Press to enter Bluetooth mode. 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected/activated or follow the instructions stated on the selected item. To return to the previous setting item, press .
BLUETOOTH® Bluetooth mode settings 1 Press and hold . 2 Turn the volume knob to select [BLUETOOTH], then press the knob. 3 Turn the volume knob to select an item (see the following table), then press the knob. 4 Repeat step 3 until the desired item is selected/activated or follow the instructions stated on the selected item. to exit. To return to the previous setting item, press 5 Press . Default: XX PHONE*1 AUDIO*1 Selects the phone or audio device to connect or disconnect.
BLUETOOTH® BLUETOOTH — Audio Internet radio via Bluetooth Listen to Pandora You can listen to Pandora on the Android device via Bluetooth on this unit. Preparation: Select [ON] for [PANDORA] in [SRC SELECT]. ( 4) 1 Open the Pandora application on your device. 2 Connect your Bluetooth audio player via Bluetooth connection. ( 14) 3 Press repeatedly to select PANDORA. The source switches and broadcast starts automatically. You can operate Pandora in the same way as Pandora for iPod/iPhone.
AUX AUDIO SETTINGS Use a portable audio player 1 Connect a portable audio player (commercially available). 3.5 mm (1/8") stereo mini plug with “L” shaped connector (commercially available) Select a preset equalizer Auxiliary input jack Portable audio player 2 Select [ON] for [AUX] in [SRC SELECT]. ( 4) 3 Press repeatedly to select AUX. 4 Turn on the portable audio player and start playback. Use a 3-core plug head stereo mini plug for optimum audio output. Press repeatedly.
AUDIO SETTINGS Default: XX SUB.W LEVEL *1 EQ SETTING EQ PRESET Select a preset equalizer suitable to the music genre. (Select [USER] to use the settings made in [EASY EQ] or [PRO EQ].) FLAT / HARD ROCK / POP / HIP HOP / R&B / JAZZ / CLASSICAL / USER EASY EQ Adjust your own sound settings. The settings are stored to [USER]. • The settings made may affect the current settings of [PRO EQ]. SUB.W SP *1*2: 00 to +06 (Default: 03 1 3 SUB.
AUDIO SETTINGS (For KD-R970BTS / KD-R870BT / KD-RD97BT / KD-RD87BT) SND EFFECT Audio signal through lineout terminal (Not applicable for TUNER source.) SML/ MED/ LRG: Virtually enhances the sound space. ; OFF: Cancels. Setting on [SPK/PRE OUT] RESPONSE LV1/ LV2/ LV3: Virtually makes the sound more realistic. ; OFF: Cancels. REAR/REAR Front speakers output Rear speakers output SOUND LIFT LV1/ LV2/ LV3: Virtually adjust the sound position heard from the speakers. ; OFF: Cancels. REAR/SUB.
AUDIO SETTINGS Crossover settings Below are the available setting items for 2-way crossover and 3-way crossover. Caution Select a crossover type according to how the speakers are connected. ( 34, 35) If you select a wrong type: • The speakers may damage. • The output sound level may be extremely high or low. 2-way crossover setting items SPK SIZE FRONT SIZE 3.5"/ 4"/ 4.75"/ 5"/ 6.5"/ 6.75"/ 7"/ 4×6"/ 5×7"/ 6×8"/ 6×9"/ 7×10" TWEETER SML/ MID/ LRG/ NONE (not connected) REAR *1 3.5"/ 4"/ 4.75"/ 5"/ 6.
DISPLAY SETTINGS AUDIO SETTINGS 3-way crossover setting items KD-R975BTS / KD-R970BTS / KD-RD97BT KD-R97MBS / KD-R875BTS / KD-R870BT / KD-R770BT / KD-RD87BT SPK SIZE TWEETER SML/ MID/ LRG MID RANGE 3.5"/ 4"/ 4.75"/ 5"/ 6.5"/ 6.75"/ 7"/ 4×6"/ 5×7"/ 6×8"/ 6×9" WOOFER * 6.5"/ 8"/ 10"/ 12"/ 15" OVER/ NONE (not connected) X ' OVER TWEETER MID RANGE WOOFER * HPF FRQ 1KHZ/ 1.6KHZ/ 2.5KHZ/ 4KHZ/ 5KHZ/ 6.3KHZ/ 8KHZ/ 10KHZ/ 12.5KHZ 1 Press and hold .
DISPLAY SETTINGS BRIGHTNESS Set the button and display brightness for day and night separately. 1 DAY / NIGHT: Select day or night. 2 Select a zone. ( 24) 3 Set the brightness level (00 to 31). (Default: DAY: 31 ; NIGHT: 15) DAY COLOR SCROLL *2 ONCE: Scrolls the display information once. ; AUTO: Repeats scrolling at 5-second intervals. ; OFF: Cancels. NIGHT COLOR COLOR (for KD-R975BTS / KD-R970BTS / KD-RD97BT) PRESET Select color for display and button illumination separately.
REFERENCES Change the display information Each time you press , the display information changes. • If the information is unavailable or not recorded, “NO TEXT”, “NO NAME”, or other information (eg. station name) appears.
REFERENCES Maintenance Cleaning the unit Wipe off dirt on the faceplate with a dry silicone or soft cloth. Cleaning the connector Detach the faceplate and clean the connector gently with a cotton swab, being careful not to damage the connector. Connector (on the reverse side of the faceplate) Handling discs: • Do not touch the recording surface of the disc. • Do not stick tape etc. on the disc, or use a disc with tape stuck on it. • Do not use any accessories for the disc.
About Pandora • Pandora is only available in certain countries. Please visit for more information. • Because Pandora is a third-party service, the specifications are subject to change without prior notice. Accordingly, compatibility may be impaired, or some or all of the services may become unavailable. • Some functions of Pandora cannot be operated from this unit. • For issues using the application, please contact Pandora at pandora-support@pandora. com.
TROUBLESHOOTING Remedy “LOADING” appears when you enter search mode by . pressing This unit is still preparing the iPod/iPhone music list. It may take some time to load, try again later. Correct characters are not displayed. • This unit can only display uppercase letters, numbers, and a limited number of symbols. • Depending on the display language you have selected ( 5), some characters may not be displayed correctly. • Sound cannot be heard during playback.
TROUBLESHOOTING Bluetooth® Remedy “CHK ANTENNA” Check that the antenna and its connection are in good condition. “CHECK TUNER” Make sure the SiriusXM Vehicle Tuner is connected to the unit. “NO SIGNAL” Make sure the antenna is mounted outside the vehicle. “SUBSCRIPTION UPDATED – PRESS ENTER TO CONTINUE.” Your subscription is updated. Press the volume knob to continue. “CODE ERROR” Make sure you have entered the correct pass code.
SPECIFICATIONS 50 kHz/200 kHz Usable Sensitivity (S/N = 26 dB) 8.2 dBf (0.71 μV/75 Ω) Quieting Sensitivity (DIN S/N = 46 dB) 17.2 dBf (2.0 μV/75 Ω) Frequency Response (±3 dB) 30 Hz — 15 kHz Signal-to-Noise Ratio (MONO) 64 dB Stereo Separation (1 kHz) 40 dB USB Channel Space Selection 530 kHz — 1 700 kHz (10 kHz step) 531 kHz — 1 611 kHz (9 kHz step) Channel Space Selection 9 kHz/10 kHz Usable Sensitivity (S/N = 20 dB) 29 dBμ (28.2 μV) Auxiliary AM Frequency Range CD player 87.
INSTALLATION / CONNECTION SPECIFICATIONS General Audio Maximum Output Power 50 W × 4 or 50 W × 2 + 50 W × 1 (Subwoofer = 4 Ω) Full Bandwidth Power (at less than 1 % THD) 22 W × 4 Speaker Impedance 4Ω—8Ω Preout Level/Load (CD/USB) 4 000 mV/10 kΩ load Preout Impedance ≤ 600 Ω Operating Voltage (10.5 V — 16 V allowable) 14.
INSTALLATION / CONNECTION Part list for installation Installing the unit (in-dash mounting) (A) Faceplate (B) Trim plate (C) Mounting sleeve (D) Wiring harness Do the required wiring. ( 34, 35) Hook on the top side Orientate the trim plate as illustrated before fitting. Dashboard of your car (E) Extraction key Bend the appropriate tabs to hold the sleeve firmly in place. Output terminals When installing without the mounting sleeve 1 Remove the mounting sleeve and trim plate from the unit.
Wiring connection (for KD-R975BTS / KD-R970BTS / KD-R97MBS / KD-R875BTS) Output terminals ( 33) IMPORTANT We recommend installing the unit with a commercially available custom wiring harness specific for your car and leave this job to professionals for your safety. Consult your car audio dealer. Signal cord (not supplied) JVC Amplifier *1 Fuse (10 A) MIC (Microphone input terminal) ( 14) (For KD-R975BTS) USB cable (DC 5 V 1.5 A) (approx. 1.
Wiring connection (for KD-R870BT / KD-R770BT / KD-RD97BT / KD-RD87BT) We recommend installing the unit with a commercially available custom wiring harness specific for your car and leave this job to professionals for your safety. Consult your car audio dealer.
libFLAC Copyright (C) 2000,2001,2002,2003,2004,2005,2006,2007,2008,2009 Josh Coalson Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
WHEN IT IS NOT REQU IRED TO DETAC H THE FRON T CONT ROL PANEL FROM THE MAIN UNIT, USE THE PROV IDED SCRE W TO ATTAC H THE CONT ROL PANEL TO THE MAIN UNIT.
1.\ CAU T I 0 N ~ w 0:::: 0 w LL w INCORRECT CONNECTION CAUSES SERIOUS DAMAGE TO THIS UNIT PLEASE READ INSTALLATION/CONNECTION MANUAL CAREFULLY. c en W ...... m ~ w 0(.) __. 0::: m ...... <( (.) (.) .. w _. ::E w 0 w 0:::: LL __. ~ ~ w _. ~ c w (.) ~ i= w 'W U'J ~ w a :a: i= I= t- w w :3 :3 (.) N 0 :E ~ i= i= ~ 0:: 0::: w w CONNECT OTHER WIRES al ~ m ~ a > CD CONNECT GROUND FIRST <~ (.) w _. I= w w CONNECT BLACK WIRE
U.S.A. JVCKENWOOD USA Cor oration TO OUR VALUED CUSTOMER THANK YOU FOR PURCHASING THIS JVC PRODUCT. WE WANT TO HELP YOU ACHIEVE A PERFECT EXPERIENCE. NEED HELP ON HOW TO HOOK UP? NEED ASSISTANCE ON HOW TO OPERATE? NEED TO LOCATE A JVC SERVICE CENTER? LIKE TO PURCHASE ACCESSORIES? JVC LIMITED WARRANTY ONLY FOR PRODUCT PURCHASED IN U.S.A.
CANADA JVC JVCKENWDOD CANADA INC. Warranty applies only to PRO~C~~s~i!~~~Canada GARANTIE by JVCKENWOOD CANADA INC. La garantls' applique seulement aux PRODUITS distrlbues au Canada par JVCKENWOOD CANADA INC. JVCKENWOOD CANADA INC. (hereafter called "JVC") gives the following express warranty for each new JVC product distributed in Canada by JVC and sold by an authorized JVC dealer.