ENGLISH FRANÇAIS ESPAÑOL KD-R988BTS / KD-R888BT CD RECEIVER INSTRUCTION MANUAL RÉCEPTEUR CD MANUEL D’INSTRUCTIONS RECEPTOR CON CD MANUAL DE INSTRUCCIONES For customer Use: Enter below the Model No. and Serial No. which are located on the top or bottom of the cabinet. Retain this information for future reference. Model No. Serial No. B5A-1351-00 [K] JS_JVC_KD_R988BTS_K_C_00_2.
CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety. JVC KENWOOD Corporation 2967-3, ISHIKAWA-MACHI, HACHIOJI-SHI, TOKYO, JAPAN THIS PRODUCT COMPLIES WITH DHHS RULES 21CFR SUBCHAPTER J IN EFFECT AT DATE OF MANUFACTURE.
IC (Industry Canada) Notice This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Note de IC (Industrie Canada) Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux apprareils radio exempts de licence.
SOFTWARE LICENSE AGREEMENT The software embedded in the Product (hereinafter the "Licensed Software") provided by Licensor is copyrighted to or sublicensable by the Licensor, and this Agreement provides for the terms and conditions which Users shall follow in order to use the Licensed Software. The User shall use the Licensed Software by agreeing with the terms of this Software License Agreement.
Article 8 Termination In case the User falls under any of the events described in the following items, the Licensor may immediately terminate this Agreement or claim that the User compensates for the damage incurred by the Licensor due to such event: (1) when the User violated any provision of this Agreement; or (2) when a petition has been filed against the User for an attachment, provisional attachment, provisional disposition or any other compulsory execution.
CONTENTS BEFORE USE BEFORE USE 2 IMPORTANT BASICS 3 GETTING STARTED 4 • To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe Warning and Caution in this manual. • Please keep the manual in a safe and accessible place for future reference.
BASICS Faceplate Remote control (RM-RK52) Loading slot This unit can be remotely controlled with an optionally purchased remote control. Display window Remote sensor (Do not expose to bright sunlight.) KD-R988BTS: USB cable from the rear of the unit Detach button Attach Detach How to reset Pull out the insulation sheet when using for the first time. How to replace the battery To On the faceplate On the remote control Turn on the power . Press • Press and hold to turn off the power.
GETTING STARTED 3 Set the basic settings 1 Press and hold . 2 Press to select an item (see the following table), then press . 3 Repeat step 2 until the desired item is selected or activated. 4 Press to exit. 1 To return to the previous setting item, press Cancel the demonstration When you turn on the power for the first time (or [FACTORY RESET] is set to [YES]), the display shows: “CANCEL DEMO” “PRESS ENTER” 1 Press . [YES] is selected for the initial setup. 2 Press again. “DEMO OFF” appears.
GETTING STARTED RADIO CLOCK TIME SYNC ON: The clock time is automatically set using the Clock Time (CT) data in FM Radio Broadcast Data System signal. ; OFF: Cancels. CLOCK DISPLAY ON: The clock time is shown on the display even when the unit is turned off. ; OFF: Cancels. ENGLISH Select the display language for menu and music information if applicable. By default, ENGLISH is selected. ESPANOL “ST” lights up when receiving an FM stereo broadcast with sufficient signal strength.
RADIO Other settings IF BAND AUTO: Increases the tuner selectivity to reduce interference noises from adjacent FM stations. (Stereo effect may be lost.) ; WIDE: Subjects to interference noises from adjacent FM stations, but sound quality will not be degraded and the stereo effect will remain. 3 Repeat step 2 until the desired item is selected/activated or follow MONO SET*3 the instructions stated on the selected item. 4 Press to exit. .
CD/USB/iPod/ANDROID Start playback The source changes automatically and playback starts. CD Label side Eject disc Selectable sources: • KD-R988BTS: CD/USB FRONT/USB REAR/iPod FRONT/iPod REAR/ANDROID FRONT/ANDROID REAR • KD-R888BT: CD/USB/iPod USB/ANDROID USB input terminal USB USB 2.0 cable*1 (commercially available) To On the faceplate Reverse/Fast-forward*3 Press and hold Select a track/file Press . Press Select a folder*4 Press . Press Repeat play*5 Press repeatedly.
CD/USB/iPod/ANDROID Select control mode While in iPod FRONT/iPod REAR/iPod USB source, press repeatedly. HEAD MODE: Control iPod from this unit. IPHONE MODE: Control iPod using the iPod itself. However, you can still play/pause or file skip from this unit. While in ANDROID FRONT/ANDROID REAR/ANDROID source, press repeatedly. AUTO MODE: Control Android device from this unit via JVC MUSIC PLAY application installed in the Android device.
Pandora® Preparation: Install the latest version of the Pandora application on your device (iPhone/iPod touch), then create an account and log in to Pandora. • Select [ON] for [PANDORA SRC] in [SOURCE SELECT]. ( 4) Create and store a new station 1 Press 2 Press 3 Press . to select [NEW STATION], then press . to select [FROM TRACK] or [FROM ARTIST], then press . A new station is created based on the current song or artist. 4 Press and hold one of the number buttons (3, 4, 5 or 6) to store.
iHeartRadio® Preparation: Install the latest version of iHeartAuto application on your device (iPhone/iPod touch), then create an account and log in to iHeartRadio. • Select [ON] for [IHEART SRC] in [SOURCE SELECT]. ( 4) Start listening 1 Open the iHeartAuto application on your device. 2 Connect your device to the USB input terminal. USB input terminal Accessory of the iPod/iPhone* To On the faceplate On the remote control Playback/pause Press Skip a track for custom station Press T.
SiriusXM® Radio (for KD-R988BTS) Only SiriusXM® brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world of satellite radio. A SiriusXM Vehicle Tuner and Subscription are required. For more information, visit . Preparation: 1 Connect the optional SiriusXM Vehicle Tuner (commercially available).
SiriusXM® Radio (for KD-R988BTS) Using SiriusXM tuner models later than SXV200: This unit can assign a maximum of 18 SmartFavorites channels. Initially, all preset channels are assigned as SmartFavorites. • “ ” appears at the last character of the channel name for the SmartFavorites channels. SiriusXM Replay™ While listening to a channel.... 1 Press . “ ” lights up and the unit memorizes this paused position. 2 Press to start Replay. Replay starts from the paused position in step 1. During Replay...
SiriusXM® Radio (for KD-R988BTS) TuneScan™ You can get a short preview of the songs that you have missed on each of your SmartFavorites music channels or currently tuned music channel. 1 Press . 2 Press to select TUNE SCAN, then press . Scanning start for the first 6 seconds of the recorded music contents. • To listen to the current song, press to stop scanning. The unit continues playing the current song. • To select the previous/next song, press . • To cancel scanning, press and hold .
BLUETOOTH® BLUETOOTH — Connection Supported Bluetooth profiles – Hands-Free Profile (HFP) – Advanced Audio Distribution Profile (A2DP) – Audio/Video Remote Control Profile (AVRCP) – Serial Port Profile (SPP) – Phonebook Access Profile (PBAP) Supported Bluetooth codecs – Sub Band Codec (SBC) – Advanced Audio Coding (AAC) Connect the microphone MIC (microphone input terminal)* Microphone (supplied) Rear panel Adjust the microphone angle Secure using cord clamps (not supplied) if necessary.
BLUETOOTH® Auto Pairing BLUETOOTH — Mobile phone When you connect iPhone/iPod touch/ Android device to the USB input terminal, pairing request (via Bluetooth) is automatically activated. Symbolic button Press to pair once you have confirmed the device name. Receive a call Automatic pairing request is activated only if: – Bluetooth function of the connected device is turned on. – [AUTO PAIRING] is set to [ON].
BLUETOOTH® To On the faceplate Default: XX On the remote control While talking on the first incoming call... Answer another incoming call and hold the current call Press Reject another incoming call Press and hold . or ( Not available ) End current call and activate held call Press and hold . or Press and hold . Swap between the current call and held call Press Adjust the phone volume*1 [00] to [35] (Default: [15]) Press a call.
BLUETOOTH® Make a call using voice recognition Make a call You can make a call from the call history, phonebook, or dialing the number. Call by voice is also possible if your mobile phone has the feature. 1 Press to enter Bluetooth mode. “(First device name)” appears. • If two Bluetooth phones are connected, press again to switch to another phone. “(Second device name)” appears. 2 Press to select an item (see the following table), then press .
BLUETOOTH® Bluetooth compatibility check mode Bluetooth mode settings 1 Press and hold . 2 Press to select an item (see the following table), then press . 3 Repeat step 2 until the desired item is selected/activated or follow the instructions stated on the selected item. to exit. To return to the previous setting item, press 4 Press . Default: XX BT MODE PHONE SELECT* AUDIO SELECT* DEVICE DELETE PIN CODE EDIT (0000) Selects the phone or audio device to connect or disconnect.
BLUETOOTH® The connectivity result flashes on the display. “PAIRING OK” and/or “HANDS-FREE OK”*1 and/ or “AUD.STREAM OK”*2 and/or “PBAP OK”*3 : Compatible *1 Compatible with Hands-Free Profile (HFP) *2 Compatible with Advanced Audio Distribution Profile (A2DP) *3 Compatible with Phonebook Access profile (PBAP) After 30 seconds, “PAIRING DELETED” appears to indicate that pairing has been deleted, and the unit exits check mode. • To cancel, press and hold to turn off the power, then turn on the power again.
BLUETOOTH® Settings to use JVC Remote application STATUS JVC Remote application is designed to control the JVC car receiver’s operations from iPhone/iPod (via Bluetooth or via USB input terminal) or Android smartphone (via Bluetooth). Preparation: Install the latest version of JVC Remote application on your device before connecting. For more information, visit . 1 Press and hold . 2 Press to select an item (see the following table), then press .
BLUETOOTH® Internet radio via Bluetooth You can listen to internet radio (Pandora and iHeartRadio) on iPhone/ iPod touch/Android device via Bluetooth on this unit. • Make sure the USB input terminal is not connected to any device. AUX Use a portable audio player 1 Connect a portable audio player (commercially available). Auxiliary input jack Portable audio player Listen to Pandora Preparation: Select [ON] for [PANDORA SRC] in [SOURCE SELECT]. ( 4) 1 Open the Pandora application on your device.
AUDIO SETTINGS PRO EQ Adjust your own sound settings. • The settings are stored to [USER]. • The settings made may affect the current settings of [EASY EQ]. 62.5HZ LEVEL –09 to LEVEL +09 (LEVEL 00): Adjusts the level to memorize for each source. (Before making an adjustment, select the source you want to adjust.) 1 Press and hold . 2 Press to select an item (see the following table), then press .
AUDIO SETTINGS FADER (Not applicable when 3-way crossover is selected.) POSITION R15 to POSITION F15 (POSITION 00): Adjusts the front and rear speaker output balance. BALANCE*4 POSITION L15 to POSITION R15 (POSITION 00): Adjusts the left and right speaker output balance. VOLUME ADJUST LEVEL –15 to LEVEL +06 (LEVEL 00): Preset the initial volume level of each source (compared to the FM volume level). Before adjustment, select the source you want to adjust.
AUDIO SETTINGS Connection via speaker leads Speaker output settings [SPK/PRE OUT] (Applicable only if [X ' OVER TYPE ] is set to [2-WAY]) ( 23) Select the output setting for the speakers [SPK/PRE OUT], based on the speaker connection method. Connection via lineout terminals For connections through an external amplifier. ( 35) KD-R988BTS: Setting on [SPK/PRE OUT] REAR/REAR (default) REAR/SUB.W SUB.W/SUB.W For connections without using an external amplifier.
AUDIO SETTINGS Crossover settings Below are the available setting items for 2-way crossover and 3-way crossover. 2-way crossover setting items SPEAKER SIZE FRONT SIZE 3.5"/4"/4.75"/5"/6.5"/6.75"/7"/4×6/5×7/6×8/ 6×9/7×10 TWEETER SMALL/MIDDLE/LARGE/NONE (not connected) Caution Select a crossover type according to how the speakers are connected. ( 35) If you select a wrong type: • The speakers may damage. • The output sound level may be extremely high or low.
AUDIO SETTINGS 3-way crossover setting items SPEAKER SIZE TWEETER SMALL/MIDDLE/LARGE MID RANGE WOOFER*3 3.5"/4"/4.75"/5"/6.5"/6.75"/7"/4×6/5×7/6×8/6×9 6.5"/8"/10"/12"/15" OVER/NONE (not connected) X ' OVER TWEETER MID RANGE WOOFER*3 Digital Time Alignment sets the delay time of the speaker output to create a more suitable environment for your vehicle. • For more information, 27, Determining the value for [DISTANCE] and [GAIN] of [DTA SETTINGS].
DISPLAY SETTINGS AUDIO SETTINGS Symbolic button Determining the value for [DISTANCE] and [GAIN] of [DTA SETTINGS] If you specify the distance from the center of the currently set listening position to every speaker, the delay time will be automatically computed and set. 1 Determine the center of the currently set listening position as the reference point. 2 Measure the distances from the reference point to the speakers.
DISPLAY SETTINGS BRIGHTNESS TEXT SCROLL*2 Set the brightness for day and night separately. 1 DAY/NIGHT: Select day or night. 2 Select a zone. (See illustration, 27.) 3 LEVEL 00 to LEVEL 31: Set the brightness level. (Default: [DAY]: LEVEL 31 ; [NIGHT]: LEVEL 15) SCROLL ONCE: Scrolls the display information once. ; SCROLL AUTO: Repeats scrolling at 5-second intervals. ; SCROLL OFF: Cancels. COLOR (for symbolic button only) PRESET Select an illumination color for the symbolic button.
REFERENCES Playable files • Playable audio file: For disc: MP3 (.mp3), WMA (.wma), AAC (.aac) For USB mass storage class device: MP3 (.mp3), WMA (.wma), AAC (.aac), AAC (.m4a), WAV (.wav), FLAC (.flac) • Playable disc media: CD-R/CD-RW/CD-ROM • Playable disc file format: ISO 9660 Level 1/2, Joliet, Long file name.
REFERENCES Change the display information Each time you press , the display information changes. • If the information is unavailable or not recorded, “NO TEXT”, “NO NAME”, or other information (eg. station name) appears.
TROUBLESHOOTING Radio “MISWIRING CHECK WIRING THEN PWR ON” appears. “PROTECTING SEND SERVICE” appears. Source cannot be selected. • Radio reception is poor. • Static noise while listening to the radio. Disc cannot be ejected. CD/USB/iPod “IN DISC” appears. “PLEASE EJECT” appears. Playback order is not as intended. Elapsed playing time is not correct. “NOT SUPPORT” appears and track skips. “READING” keeps flashing. “UNSUPPORTED DEVICE” appears. “UNRESPONSIVE DEVICE” appears.
TROUBLESHOOTING 32 Playback is intermittent or sound skips. “CANNOT PLAY” Remedy Symptom Turn off the power saving mode on the Android device. • Make sure Android device contains playable audio files. • Reconnect the Android device. • Restart the Android device. Remedy “CH LOCKED LOCK CODE?” The selected channel is locked. Enter the correct pass code to unlock. ( 13) “CHAN UNSUB” The selected channel is unsubscribed. Call 1-866-635-2349 in the U.S.A. or 1-877-438-9677 in Canada to subscribe.
INSTALLATION/CONNECTION TROUBLESHOOTING Bluetooth® Symptom Remedy Phone sound quality is poor. • Reduce the distance between the unit and the Bluetooth device. • Move the car to a place where you can get a better signal reception. Sound is being interrupted or skipped during playback of a Bluetooth audio player. • Reduce the distance between the unit and the Bluetooth audio player. • Turn off, then turn on the unit and try to connect again.
INSTALLATION/CONNECTION Installing the unit (in-dash mounting) Part list for installation Do the required wiring. ( 35) (A) Faceplate (B) Trim plate (C) Mounting sleeve (D) Wiring harness Hook on the top side Orientate the trim plate as illustrated before fitting. Dashboard of your car Bend the appropriate tabs to hold the sleeve firmly in place. When installing without the mounting sleeve 1 Remove the mounting sleeve and trim plate from the unit.
INSTALLATION/CONNECTION Wiring connection Signal cord (not supplied) IMPORTANT We recommend installing the unit with a commercially available custom wiring harness specific for your car and leave this job to professionals for your safety. Consult your car audio dealer. JVC Amplifier*1 Output terminals ( 34) KD-R988BTS: USB cable (DC 5 V 1.5 A) (approx. 1.
SPECIFICATIONS 8.2 dBf (0.71 μV/75 Ω) Quieting Sensitivity (DIN S/N = 46 dB) 17.2 dBf (2.0 μV/75 Ω) Frequency Response (±3 dB) 30 Hz — 15 kHz Signal-to-Noise Ratio (MONO) 64 dB Stereo Separation (1 kHz) 40 dB CD player Usable Sensitivity (S/N = 20 dB) USB Usable Sensitivity (S/N = 26 dB) AM Frequency Range 36 87.9 MHz — 107.9 MHz (200 kHz step) 87.5 MHz — 108.0 MHz (50 kHz step) 530 kHz — 1 700 kHz (10 kHz step) 531 kHz — 1 611 kHz (9 kHz step) 29 dBμ (28.2 μV) USB Standard USB 1.1, USB 2.
General Audio SPECIFICATIONS Maximum Output Power 50 W × 4 or 50 W × 2 + 50 W × 1 (Subwoofer = 4 Ω) Full Bandwidth Power (at less than 1 % THD) 22 W × 4 Speaker Impedance 4Ω—8Ω Preout Level/Load (CD/USB) 4 000 mV/10 kΩ load Preout Impedance ≤ 600 Ω Operating Voltage (10.5 V — 16 V allowable) 14.
libFLAC Copyright (C) 2000,2001,2002,2003,2004,2005,2006,2007,2008,2009 Josh Coalson Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
WHEN IT IS NOT REQUIRED TO DETACH THE FRONT CONTROL PANEL FROM THE MAIN UNIT, USE THE PROVIDED SCREWTO ATTACH THE CONTROL PANEL TO THE MAIN UNIT.
U.S.A. JVCKENWOOD USA Corporation TO OUR VALUED CUSTOMER THANK YOU FOR PURCHASING THIS JVC PRODUCT. WE WANT TO HELP YOU ACHIEVE A PERFECT EXPERIENCE. .JVC LIMITED WARRANTY ONLY FOR PRODUCT PURCHASED IN U.SA JVCKENWOOD USA Corporation warrants this product and all parts thereof. except as set forth below ONLY TO THE OR IGINAL RETAIL PURC HASER to be FREE FROM DEFECTIVE MAT ERIALS AN D WO RKMANSHIP fro m t he date of original pu rchase for the period shown below.
.Jvc CANADA JVCKENWOOD CANADA INC. WARRANTY GARANTIE Warranty app lies only to PRODUCT distributed in Canada by JVCKENWOOD CANADA INC. JVCKENWOOD CANADA INC. (hereafter called "JVC ") gives the following express warranty for each new JVC prod uct distributed in Canada by JVC and sol d by an authorized JVC dealer.