ENGLISH FRANÇAIS ESPAÑOL KD-R690S / KD-R492 / KD-R490 CD RECEIVER INSTRUCTION MANUAL RÉCEPTEUR CD MANUEL D’INSTRUCTIONS RECEPTOR CON CD MANUAL DE INSTRUCCIONES For customer Use: Enter below the Model No. and Serial No. which are located on the top or bottom of the cabinet. Retain this information for future reference. Model No. Serial No. B5A-2120-00 [K] JS_JVC_KD_R690S_K_C.
CONTENTS BEFORE USE BEFORE USE 2 IMPORTANT BASICS 3 GETTING STARTED 4 • To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe Warning and Caution in this manual. • Please keep the manual in a safe and accessible place for future reference.
BASICS Faceplate Volume knob Remote control (RM-RK52) Attach Loading slot Display window Remote sensor (Do not expose to bright sunlight.) KD-R690S Detach Pull out the insulation sheet when using for the first time. KD-R492/ KD-R490 How to reset How to replace the battery Your preset adjustments will be erased except stored radio stations. Detach button To On the faceplate On the remote control Turn on the power Press . • Press and hold to turn off the power.
GETTING STARTED 3 Set the basic settings 1 Press and hold . 2 Turn the volume knob to select an item (see the following table), then press the knob. 1 3 Repeat step 2 until the desired item is selected or activated. 4 Press to exit. Cancel the demonstration To return to the previous setting item, press . When you turn on the power (or after you reset the unit), the display shows: “CANCEL DEMO” “PRESS” “VOLUME KNOB” Default: XX 1 Press the volume knob.
GETTING STARTED RADIO CLOCK TIME SYNC ON: The clock time is automatically set using the Clock Time (CT) data in FM Radio Broadcast Data System signal/FM Radio Data System signal. ; OFF: Cancels. CLOCK DISPLAY ON: The clock time is shown on the display even when the unit is turned off. ; OFF: Cancels. ENGLISH Select the display language for menu and music information if applicable. By default, ENGLISH is selected.
RADIO Select a stored station Press one of the number buttons (1 to 6). (or) 1 Press . 2 Turn the volume knob to select a preset number, then press the knob. Other settings 1 Press and hold . 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected/activated or follow the instructions stated on the selected item. 4 Press to exit. To return to the previous setting item, press .
RADIO Default: XX TI ON: Allows the unit to temporarily switch to Traffic Information if available (“TI” lights up) while listening to all sources except in AM. ; OFF: Cancels. Turns on the radio at a specific time regardless of the current source. 1 ONCE/DAILY/WEEKLY/OFF: Select how often the timer will be turned on. 2 FM/AM: Select the band. 3 01 to 18 (for FM)/01 to 06 (for AM): Select the preset station. 4 Set the activation day *1 and time. “M” lights up when complete. AREA N.
CD/USB/iPod/ANDROID Start playback The source changes automatically and playback starts. CD Label side Eject disc USB input terminal USB USB 2.0 cable*1 (commercially available) Selectable source: KD-R690S: CD/USB/iPod/ANDROID KD-R492/KD-R490: CD/USB/ANDROID • To directly select USB/iPod/ANDROID source, press iPod/USB or USB. To On the faceplate Reverse/Fast-forward*3 Press and hold Select a track/file Press . Press Select a folder*4 Press .
CD/USB/iPod/ANDROID Select control mode Select a file from a folder/list While in iPod source, press repeatedly. HEAD MODE : Control iPod from this unit. IPHONE MODE : Control iPod using the iPod itself. However, you can still play/pause or file skip from this unit. While in ANDROID source, press repeatedly. AUTO MODE : Control Android device from this unit via JVC MUSIC PLAY application installed in the Android device.
Pandora® (for KD-R690S) Preparation: Install the latest version of the Pandora application on your device (iPhone/iPod touch), then create an account and log in to Pandora. • Select [ON] for [PANDORA SRC] in [SOURCE SELECT]. ( 4) Create and store a new station 1 Press . 2 Turn the volume knob to select [NEW STATION], then press the knob. 3 Turn the volume knob to select [FROM TRACK] or [FROM ARTIST], then press the knob. A new station is created based on the current song or artist.
SiriusXM® Radio (for KD-R690S) Only SiriusXM® brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world of satellite radio. A SiriusXM Vehicle Tuner and Subscription are required. For more information, visit . Preparation: 1 Connect the optional SiriusXM Vehicle Tuner (commercially available).
SiriusXM® Radio (for KD-R690S) Using SiriusXM tuner models later than SXV200: This unit can assign a maximum of 18 SmartFavorites channels. Initially, all preset channels are assigned as SmartFavorites. • “ ” appears at the last character of the channel name for the SmartFavorites channels. SiriusXM Replay™ While listening to a channel.... 1 Press the volume knob. “ ” lights up and the unit memorizes this paused position. 2 Press the volume knob to start Replay.
SiriusXM® Radio (for KD-R690S) TuneScan™ CODE SET 1 Press the volume knob to enter [NEW CODE]. 2 Turn the volume knob to select a number. 3 Press to move to the entry position. 4 Repeat steps 2 and 3 to enter a new 4-digit pass code. 5 Press the volume knob to confirm. 6 Repeat steps 2 to 5 to reconfirm the pass code. • Make a note of the new pass code to enter channel lock settings for next time. LOCK SETTING MATURE CH: Selects the SiriusXM-defined lock setting.
AUX AUDIO SETTINGS Use a portable audio player 1 Connect a portable audio player (commercially available). 3.5 mm (1/8") stereo mini plug with “L” shaped connector (commercially available) Portable audio player Select a preset equalizer directly Auxiliary input jack 2 Select [ON] for [BUILT-IN AUX] in [SOURCE SELECT]. ( 4) 3 Press repeatedly to select AUX. 4 Turn on the portable audio player and start playback. Use a 3-core plug head stereo mini plug for optimum audio output.
AUDIO SETTINGS Default: XX EQ SETTING PRESET EQ EASY EQ PRO EQ Select a preset equalizer suitable to the music genre. • Select [USER] to use the settings made in [EASY EQ] or [PRO EQ]. FLAT/DRVN 3/DRVN 2/DRVN 1/HARD ROCK/HIP HOP/JAZZ/POP/R&B/ TALK/USER/VOCAL BOOST/BASS BOOST/CLASSICAL/DANCE AUDIO CONTROL BASS BOOST LEVEL +01 to LEVEL +05 (LEVEL +01): Selects your preferred bass boost level. ; OFF: Cancels.
AUDIO SETTINGS VOLUME ADJUST AMP GAIN LEVEL –15 to LEVEL +06 (LEVEL 00): Preset the initial volume level of each source (compared to the FM volume level). Before adjustment, select the source you want to adjust. (“VOL ADJ FIX” appears if FM is selected.) LOW POWER: Limits the maximum volume level to 25. (Select if the maximum power of each speaker is less than 50 W to prevent damaging the speakers.) ; HIGH POWER: The maximum volume level is 35. D.T.
DISPLAY SETTINGS Zone identification for brightness setting BRIGHTNESS Set the brightness for day and night separately. 1 DAY/NIGHT: Select day or night. 2 Select a zone. 3 LEVEL 00 to LEVEL 31: Set the brightness level. TEXT SCROLL *2 SCROLL ONCE: Scrolls the display information once. ; SCROLL AUTO: Repeats scrolling at 5-second intervals. ; SCROLL OFF: Cancels. Zone identification for color setting (for KD-R690S) COLOR (for KD-R690S) 1 Press and hold .
REFERENCES Maintenance Cleaning the unit Wipe off dirt on the faceplate with a dry silicone or soft cloth. Cleaning the connector Detach the faceplate and clean the connector gently with a cotton swab, being careful not to damage the connector. Connector (on the reverse Handling discs: side of the faceplate) • Do not touch the recording surface of the disc. • Do not stick tape etc. on the disc, or use a disc with tape stuck on it. • Do not use any accessories for the disc.
REFERENCES About Android device • This unit supports Android OS 4.1 and above. • Some Android devices (with OS 4.1 and above) may not fully support Android Open Accessory (AOA) 2.0. • If the Android device supports both mass storage class device and AOA 2.0, this unit always playback via AOA 2.0 as priority. About Pandora • Pandora is only available in certain countries. For more information, visit .
TROUBLESHOOTING REFERENCES Source name Display information (for KD-R492/KD-R490) FM or AM Frequency (For FM Radio Broadcast Data System stations/FM Radio Data signal only) Station name (PS)/Program type (PTY) Radio text Radio text+ Radio text+ title/Radio text+ artist Frequency Clock (back to the beginning) “MISWIRING CHECK WIRING THEN PWR ON” appears. Turn the power off, then check to be sure the terminals of the speaker wires are insulated properly. Turn the power on again.
TROUBLESHOOTING Correct characters are not displayed. • This unit can only display uppercase letters, numbers, and a limited number of symbols. • Depending on the display language you have selected ( 5), some characters may not be displayed correctly. Cannot playback at [AUTO MODE]. • Reconnect the Android device. • If in [AUDIO MODE], launch any media player application on the Android device and start playback.
INSTALLATION/CONNECTION TROUBLESHOOTING SiriusXM® Radio Symptom Remedy “CH UNAVAIL” The selected channel is unavailable. For more information about the SiriusXM channel lineup, visit . “CHECK ANTENNA” Check the antenna and its connection are in good condition. “CHECK TUNER” Make sure the SiriusXM Vehicle Tuner is connected to the unit. “NO SIGNAL” Make sure the antenna is mounted outside the vehicle. “SUBSCRIPTION UPDATED – PRESS ENTER TO CONTINUE.
INSTALLATION/CONNECTION Part list for installation (A) Faceplate Installing the unit (in-dash mounting) (B) Trim plate Do the required wiring. ( 24) (C) Mounting sleeve (D) Wiring harness Hook on the top side Orientate the trim plate as illustrated before fitting. Dashboard of your car (E) Extraction key Bend the appropriate tabs to hold the sleeve firmly in place.
INSTALLATION/CONNECTION Wiring connection KD-R690S/KD-R492 IMPORTANT We recommend installing the unit with a commercially available custom wiring harness specific for your car and leave this job to professionals for your safety. Consult your car audio dealer.
SPECIFICATIONS Frequency Response (±1 dB) 20 Hz — 20 kHz Signal-to-Noise Ratio (1 kHz) 105 dB Usable Sensitivity (S/N = 26 dB) 8.2 dBf (0.71 μV/75 Ω) Dynamic Range 90 dB Quieting Sensitivity (DIN S/N = 46 dB) 17.2 dBf (2.
CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety. JVC KENWOOD Corporation 2967-3, ISHIKAWA-MACHI, HACHIOJI-SHI, TOKYO, JAPAN THIS PRODUCT COMPLIES WITH DHHS RULES 21CFR SUBCHAPTER J IN EFFECT AT DATE OF MANUFACTURE.
WHEN IT IS .N OT REQU1REO TO DETACH THE FRONT CONTROL PANEL FROM THE MAIN UNIT, USE THE PROVIDED SCREWTO ATTACH THE CONTROL PANEL TO THE MAIN UNIT.