CD RECEIVER KD-G333/KD-G332/KD-G331 For canceling the display demonstration, see page 5. For installation and connections, refer to the separate manual. INSTRUCTIONS GET0406-003A [EX/EU] Cover_KD-G333_003A_f.
ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION: Visible and/or invisible class 1M laser radiation when open.
Ex.: When number button 2 works as MO (monaural) button. CONTENTS Control panel — KD-G333/KD-G332/KD-G331 .. 4 Getting started ................................ 5 Basic operations ................................................... 5 ENGLISH How to use the M MODE button If you press M MODE, the unit goes into functions mode, then the number buttons and ¢/4 buttons work as different function buttons. Radio operations ............................. 6 FM RDS operations ...........................
ENGLISH Control panel — KD-G333/KD-G332/KD-G331 Parts identification Display window 1 2 3 4 5 6 7 8 9 p q w e r t y u i 0 (eject) button Loading slot (standby/on/attenuator) button SOURCE button Display window BAND button T/P (traffic programme/programme type) button ¢/4 buttons Control dial SEL (select) button DISP (display) button EQ (equalizer) button MO (monaural) button SSM (Strong-station Sequential Memory) button Number buttons RPT (repeat) button RND (random) button M MODE button o (control pane
Getting started Basic operations • See also “General settings — PSM” on pages 12 and 13. ~ 1 Turn on the power. ENGLISH Basic settings 2 Ÿ * You cannot select “DISC” as the playback source if there is no disc in the unit. ! For FM/AM tuner ⁄ Adjust the volume. 1 Canceling the display demonstrations Select “DEMO,” then “DEMO OFF.” 2 Setting the clock Select “CLOCK H” (hour), then adjust the hour. Select “CLOCK M” (minute), then adjust the minute.
ENGLISH Radio operations To restore the stereo effect, repeat the same procedure. “MONO OFF” appears and the MO indicator goes off. ~ Storing stations in memory Ÿ You can preset six stations for each band. Lights up when receiving an FM stereo broadcast with sufficient signal strength. FM station automatic presetting— SSM (Strong-station Sequential Memory) 1 ! Start searching for a station. When a station is received, searching stops. To stop searching, press the same button again.
Searching for your favorite FM RDS programme Preset number flashes for a while. Listening to a preset station 1 You can tune in to a station broadcasting your favorite programme by searching for a PTY code. • To store your favorite programme types, see the following. ~ Ÿ 2 Select the preset station (1 – 6) you want. ENGLISH 3 The last selected PTY code appears. Select one of your favorite programme types. or Select one of the PTY codes (see page 9).
Select the preset number (1 – 6) you want to store into. ENGLISH 2 Ex.: When “ROCK M” is selected 3 Repeat steps 1 and 2 to store other PTY codes into other preset numbers. 4 Finish the procedure. Using the standby receptions PTY Standby Reception PTY Standby Reception allows the unit to switch temporarily to your favorite PTY programme from any source other than AM. To activate and select your favorite PTY code for PTY Standby Reception, see page 13. The PTY indicator either lights up or flashes.
Usually when you press the number buttons, the preset station is tuned in. If the signals from the FM RDS preset station are not sufficient for good reception, this unit, using the AF data, tunes in to another frequency broadcasting the same programme as the original preset station is broadcasting. • The unit takes some time to tune in to another station using programme search. • See also page 13.
ENGLISH : Elapsed playing time with the current track number : Clock with the current track number : Corresponding indicator lights up on the display To select a particular track in a folder (for MP3 or WMA disc): Prohibiting disc ejection You can lock a disc in the loading slot. *1 If the current disc is an audio CD, “NO NAME” appears. *2 If an MP3/WMA file does not have Tag information, folder name and file name appear. In this case, the TAG indicator will not light up.
Sound adjustments You can select a preset sound mode suitable to the music genre (C-EQ: custom equalizer). You can adjust the sound characteristics to your preference. 1 1 2 2 Preset values Indication (For) BAS (bass) TRE ENGLISH Adjusting the sound LOUD (treble) (loudness) Indication, [Range] USER (Flat sound) 00 00 OFF BAS*1 (bass), [–06 to +06] Adjust the bass. ROCK (Rock or disco music) +03 +01 ON TRE*1 (treble), [–06 to +06] Adjust the treble.
ENGLISH General settings — PSM You can change PSM (Preferred Setting Mode) items listed in the table that follows. 3 Adjust the PSM item selected. 4 Repeat steps 2 and 3 to adjust other PSM items if necessary. 5 Finish the procedure. 1 2 Select a PSM item. Indications Item ( : Initial) Selectable settings, [reference page] DEMO Display demonstration • DEMO ON : Display demonstration will be activated automatically if no operation is done for about 20 seconds, [5]. : Cancels.
Item ( : Initial) Selectable settings, [reference page] PTY-STBY *2 PTY standby OFF, PTY codes Activates PTY Standby Reception with one of the PTY codes, [9]. TA VOL *2 Traffic announcement volume VOL 00 – VOL 30 or 50 *3 [Initial: VOL 15] P-SEARCH *2 Programme search • ON • OFF : Activates Programme Search, [9]. : Cancels. DIMMER Dimmer • ON • OFF : Dims the display illumination. : Cancels.
ENGLISH Maintenance How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors. To keep discs clean A dirty disc may not play correctly. If a disc does become dirty, wipe it with a soft cloth in a straight line from center to edge. • Do not use any solvent (for example, conventional record cleaner, spray, thinner, benzine, etc.
• If you want to know more about RDS, visit . Basic operations Disc operations Turning on the power Caution for DualDisc playback • By pressing SOURCE on the unit, you can also turn on the power. If the source is ready, playback also starts. • The Non-DVD side of a “DualDisc” does not comply with the “Compact Disc Digital Audio” standard. Therefore, the use of Non-DVD side of a DualDisc on this product may not be recommended.
ENGLISH • CD-RWs may require a longer readout time since the reflectance of CD-RWs is lower than that of regular CDs. • Do not use the following CD-Rs or CD-RWs: – Discs with stickers, labels, or protective seal stuck to the surface. – Discs on which labels can be directly printed by an ink jet printer. Using these discs under high temperatures or high humidities may cause malfunctions or damage to the unit. Playing an MP3/WMA disc • This unit can play back MP3/WMA files with the extension code <.
What appears to be trouble is not always serious. Check the following points before calling a service center. FM/AM General Symptoms ENGLISH Troubleshooting Remedies/Causes • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. • The unit does not work at all. Reset the unit (see page 2). • SSM automatic presetting does not work. Store stations manually. • Static noise while listening to the radio. Connect the aerial firmly.
MP3/WMA playback ENGLISH Symptoms Remedies/Causes • Disc cannot be played back. • Use a disc with MP3/WMA tracks recorded in the format compliant with ISO 9660 Level 1, Level 2, Romeo, or Joliet. • Add the extension code <.mp3> or <.wma> to the file names. • Noise is generated. Skip to another track or change the disc. (Do not add the extension code <.mp3> or <.wma> to non-MP3 or WMA tracks.) • A longer readout time is required (“CHECK” keeps flashing on the display).
AUDIO AMPLIFIER SECTION CD PLAYER SECTION Maximum Power Output: Front/Rear: 50 W per channel Continuous Power Output (RMS): Front/Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion. Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Tone Control Range: Bass: ±12 dB at 100 Hz Treble: ±12 dB at 10 kHz Frequency Response: 40 Hz to 20 000 Hz Signal-to-Noise Ratio: 70 dB Line-Out Level/ 2.
Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Dear Customer, This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety. European representative of Victor Company of Japan, Limited is: JVC Technology Centre Europe GmbH Postfach 10 05 52 61145 Friedberg Germany EN, FR © 2006 Victor Company of Japan, Limited Rear_KD-G333_003A_f.