English NETZWERKPACK BEDIENUNGSLEITFADEN BACK DE RESEAU GUIDE DE DEMARRAGE GUÍA DE INICIO DEL ADAPTADOR DE RED GUIDA RAPIDA AL CORREDO DI RETE Deutsch KA-DV5000 INSTRUCTIONS NETWORK PACK STARTUP GUIDE CK 0 00 PA V5 -D RK KA WO T NE MANUEL D’INSTRUCTIONS INSTRUCCIONES Français INSTRUCTIONS KA-DV5000BEDIENUNGSANLEITUNG Español ISTRUZIONI PO SU WE PP R LY ® is a registered trademark owned by VICTOR COMPANY OF JAPAN, LTD. is a registered trademark in Japan, the U.S.A., the U.K.
FOR USA AND CANADA IMPORTANT SAFEGUARDS CAUTION Information for USA This device complies with part 15 of the FCC Rules. Changes or modifications not approved by JVC could void the user’s authority to operate the equipment. RISK OF ELECTRIC SHOCK DO NOT OPEN 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. I Read all of these instructions. Save these instructions for later use. All warnings on the product and in the operating instructions should be adhered to.
Safety Precautions Product Components Network Pack KA-DV5000 Due to design modifications, data given in this instruction book are subject to possible change without prior notice. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. AVERTISSEMENT: POUR EVITER LES RISQUES D’INCENDIE OU D’ELECTRO-CUTION, NE PAS EXPOSER L’APPAREIL A L’HUMIDITE OU A LA PLUIE.
Features ● By connecting the unit to GY-DV5000, video/audio of camera or tape playback can be encoded/ decoded in realtime. Video data is converted to MPEG-4 and audio data is converted to G726. ● Installing a LAN-card in the PC card slot enables real-time streaming. ● Installing a Compact Flash card in the PC card slot enables real-time capturing.
What the KA-DV5000 can be used for (cont’d) Sending camera video/audio by email using CF (Compact Flash) card Connecting a notebook computer for remote control with monitor English What the KA-DV5000 can be used for CAM&VTR CONTROL CONTROL NETWORK NETW ORK SETUP VTR CONTROL CONTROL CAM REC REW ST STOP OP FF PLAY PAUSE VTR PORT POR NUMBER CAMERA&VTR CONTROL CONTR OL ENCODE PARAMETERS ARAMETERS STREAM CAPTURE OPEN EDITSEARCH MONITOR FILTER 1 3200K 2 5600K 1/8 ND .3 5600K .
Controls, Connectors and Indicators 7 CK 0 00 PA V5 -D RK KA WO T NE 4 9 6 A OF F 1 Power switch 2 Camera connection terminal For connecting DV camcorder (GYDV5000). (☞ See page 9) 3 PC card slot For inserting LAN card, Compact Flash card, etc. 4 Main unit mounting hooks Used when mounting to the main unit by hooking to the cut-away section of the camcorder. 5 EJECT button Press when ejecting card. 6 Service terminal Do not use.
Installing Streamproducer 1. Insert the CD-ROM with Streamproducer into the CD-ROM drive. Check to see whether the main unit has been mounted correctly using the procedure shown below. Wait until the access lamp of the CD-ROM drive goes out. 1 Turn off the power of GY-DV5000 and KADV5000. The screen shown on the left appears. 2 Press the button on the side of the main unit, open the cover and insert a card in the card slot. 3 Close the cover and turn on the KADV5000 power.
Specifications ● Mass: 480 g (main unit only) ● Power supply: Supplied from the GY-DV5000 ● Power consumption: DC 12 V — --- 0.5 A (main unit only) ● Allowable operating temperature: 0°C to 40°C ● Allowable storage temperature: –20°C to 60°C ● Allowable operating humidity: 30% to 80% RH ● Provided accessories CD-ROM INSTRUCTIONS Warranty Card (USA and Canada only) BH Cushion Cable Clamp ● External Dimensions (Unit: mm) 40.2 174.5 83.
KA-DV5000 NETWORK PACK NETWORK PACK KA-DV5000 User’s Guide CK 0 00 PA V5 -D RK KA WO T NE PO SU WE PP R LY ON OF F NE TW PA OR KA CK K -D V5 00 0 VICTOR COMPANY OF JAPAN, LIMITED is a registered trademark owned by VICTOR COMPANY OF JAPAN, LTD. is a registered trademark in Japan, the U.S.A., the U.K. and many other countries.
Introduction When attaching Network Pack KA-DV5000 to DV Camcorder GY-DV5000, network related menus are added to the GY-DV5000 menu screen. This User’s Guide explains settings for the network related menus, operation for recording streaming data to a CF (Compact Flash) memory card and operation for sending streaming data using a LAN card. When a LAN card is connected, menu screen settings for the Network Pack and GY-DV5000 can be operated from your PC.
Introduction LCD screen/viewfinder screen Information from Network Pack KA-DV5000 is displayed on the GY-DV5000 LCD screen/viewfinder screen. Menu screen Menu screen structure When attaching Network Pack KA-DV5000 to DV Camcorder GY-DV5000, NETWORK PACK CONFIG menu and MOVIE CLIP menu are added to the GY-DV5000 TOP MENU screen. MODE switch: When CAM-A or CAM-B is selected CF FULL! TOP MENU screen M ENU CAME RA O P E R A T I O N . . CAME RA P ROC E S S . . AUD I O / V I D E O . . LCD / V F . .
Menu screen NETWORK PACK CONFIG menu screen items 䢇 indicates default factory setting. Item Sets streaming speed (bps). 56K: MPEG4 24 kbps 128K: MPEG4 104 kbps 256K: MPEG4 232 kbps 384K: MPEG4 352 kbps 512K: MPEG4 472 kbps VIDEO RATE 56K 128K 256K 䢇384K 512K MAX FRAME RATE ( ): for E model Sets the video compression size. 320 × 240: Sets the image size to 320 × 240 pixels. (SIF) 160 × 120: Sets the image size to 160 × 120 pixels. (QSIF) (1/4 image size of SIF.
Menu screen Setting the NETWORK PACK CONFIG menu screen Menu screen Returning the NETWORK PACK CONFIG menu screen to factory settings Menu screen settings can be made regardless of whether a card is inserted. Settings will be stored in the KA-DV5000 memory even when turning the power off. SHUTTER SHUTTER STATUS STATUS MENU MENU OPEN OPEN SHUTTER dial STATUS button SHUTTER dial EDITSEARCH MONITOR FILTER 1 3200K 2 5600K 1/8 ND .3 5600K .
Network settings Setting the NETWORK SET menu screen When using a LAN card, network related settings for KA-DV5000 are made using NETWORK SET of the NETWORK PACK CONFIG Network settings menu. Settings will be stored in the KA-DV5000 memory even when turning the power off. Item Setting HOST NAME SHUTTER STATUS OPEN STATUS button EDITSEARCH MONITOR FILTER 1 3200K 2 5600K 1/8 ND .3 5600K .
Network settings USER PAGE can be customized Network settings Making network related settings USER PAGE can be customized as desired. Network related settings are made in the individual input setting screens. USER PAGE created on a PC is uploaded by FTP. Here, USER NAME is set as an example. Other settings are also made in the same manner. 1. 2. Set the unit so that NETWORK SETUP can be displayed. (☞ page 30) Create HTML on the PC using a commercially available HTML editor, etc.
Network settings Detailed IP settings (LAN) Example of IP address and subnet mast settings when using LAN is shown below. Network settings Detailed network settings (WLAN) Example of network settings when using wireless LAN is shown below. ●Operation is only guaranteed for Windows 2000, Windows XP Home Edition or Windows XP Professional. ●Operation is only guaranteed for Windows 2000, Windows XP Home Edition or Windows XP Professional. ●Internet Explorer 5.0 or later ●Internet Explorer 5.
Network settings Detailed network settings (WLAN) Recording on a CF card Formatting a CF memory card When an unformatted CF memory card is inserted and the GY-DV5000 power is turned on, “NO CF FORMAT!” appears in the LCD 2. For communication with PC via access point (Infrastructure mode) screen/viewfinder screen. DHCP WLAN AD HOC MODE WLAN ESS ID WLAN CH OFF OFF abcdef 2 IP ADDRESS NETMASK 192. 168. 100. 101 255. 255. 255.
Recording on a CF card SHUTTER Recording video on a DV cassette tape and CF memory card Recording on a CF card STATUS SHUTTER MENU Recording video on a CF memory card only STATUS MENU OPEN OPEN EDITSEARCH EDITSEARCH FILTER 1 3200K 2 5600K 1/8 ND .3 5600K .4 5600K 1/64 ND SHUTTER LCD BRIGHT DISPLAY MENU AUDIO LEVEL FULL AUTO BACK L NORMAL SPOT L FILTER 1 3200K 2 5600K 1/8 ND .3 5600K .
Recording on a CF card Recording playback signals of a DV cassette tape on a CF memory card Recording on a CF card Deleting all clip files on a CF memory card MOVIE CLIP of the NETWORK PACK CONFIG menu screen is used to delete all clips on a CF memory card. SHUTTER SHUTTER STATUS BLANK SEARCH REW STOP FF PLAY STATUS STILL MENU MENU OPEN SHUTTER dial OPEN EDITSEARCH STATUS button MONITOR FILTER 1 3200K 2 5600K 1/8 ND .3 5600K .
Movie clip Playing back video/audio recorded on a CF memory card Every time recording is performed, the recorded event is stored in the clip list of the CF memory card. The clip list is stored with the recorded event number (clip number) and the date/time when the recording was started. All events (clip numbers) can be played back Movie clip Playing back video/audio recorded on a CF memory card CLIP FUNCTION screen SHUTTER MO V I E C L I P MC 0 0 0 8 . a s f R /W on the MOVIE CLIP screen.
Movie clip Protecting a clip file on a CF memory card Clips recorded on a CF memory card can be protected using the MOVIE CLIP screen. SHUTTER Movie clip Deleting a clip file on a CF memory card Clips recorded on a CF memory card can be deleted using the MOVIE CLIP screen. STATUS SHUTTER MENU STATUS MENU OPEN SHUTTER dial STATUS button EDITSEARCH MONITOR FILTER 1 3200K 2 5600K 1/8 ND .3 5600K .
Movie clip Playing back CF memory card clips on your PC LAN card Sending video using LAN card while recording on a DV cassette tape SHUTTER STATUS MENU OPEN EDITSEARCH MONITOR STATUS button FILTER 1 3200K 2 5600K 1/8 ND .3 5600K .
LAN card Sending video using a LAN card (no DV cassette tape recording) SHUTTER LAN card Sending playback signals of a DV cassette tape using a LAN card STATUS SHUTTER MENU BLANK SEARCH REW STATUS STOP FF PLAY STILL MENU OPEN EDITSEARCH MONITOR STATUS button FILTER 1 3200K 2 5600K 1/8 ND .3 5600K .
Network pack setup Controlling GY-DV5000/KA-DV5000 via LAN card Network pack setup CAM & VTR CONTROL screen With the Network Pack, GY-DV5000/KA-DV5000 can be controlled via LAN. When the correct user ID and password are accepted, the following Streamcorder screen appears. It is also possible to playback video and audio from KA-DV5000 on your PC in the STREAMCAPTURE screen in realtime (live display) In the CAM & VTR CONTROL screen, camera adjustments of GY-DV5000 and VTR controls can be made.
Network pack setup CAM & VTR CONTROL screen \ VTR Control Network pack setup NETWORK SETUP screen Clicking NETWORK SETUP on the left of the Streamcorder screen displays the NETWORK SETUP screen for performing network related settings. VTR control icons Click each button to perform operation. \ To control the VTR in the Streamcorder screen, the following menu items of GY-DV5000 must be set in advance. ● Set NET REMOTE in the OTHERS [1/2] menu screen to ON.
Network pack setup PORT SETUP screen Clicking PORT SETUP on the left of the Streamcorder screen displays the PORT SETUP screen for performing port settings. Network pack setup ENCODE PARAMETERS screen Clicking ENCODE PARAMETERS on the left of the Streamcorder screen displays the ENCODE PARAMETERS screen for performing video/audio compression settings. Setting Input Select the setting from the Screen selection pull-down menu. Screen selection Click the OK icon to confirm setting.
Network pack setup STREAMCAPTURE screen (Playing back video/audio using a PC and saving to file) Clicking STREAMCAPTURE on the left of the Streamcorder screen displays the Streamcapture screen shown below. Network pack setup STREAMCAPTURE screen (Playing back video/audio using a PC and saving to file) About the Trigger Mode function (TRIG) Video and audio sent from KA-DV5000 via LAN can be played back on your PC in the Streamcapture screen or data can be saved to files.
Network pack setup STREAMCAPTURE screen (Playing back video/audio using a PC and saving to file) Network pack setup STREAMCAPTURE screen (Playing back video/audio using a PC and saving to file) Property dialog box About the Cast function (CAST) The Cast function can be used to send video/audio from KA-DV5000 to another PC.
Others Troubleshooting When there is a system error, network error, unit malfunction, etc., KA-DV5000 displays the error on the GY-DV5000 LCD screen or Others Screen display Troubleshooting Cause Remedy viewfinder screen. Reference page Warning display NO CF CARD! (Flashing for 3 sec.) There is no CF memory card inserted. Insert a CF memory card. PROTECT! (Flashing for 3 sec.) Deletion of a protected clip file was attempted. To delete the clip file, remove the protection.
Others Checking communication/connection By using the PING command standard to Windows, it is possible to check whether the connection is correct and that communication Others Terminology ● IP address Identification number assigned to each computer that is connected to a network. The address is used for communication between can be made from the PC to KA-DV5000. network devices. 1. Launch the command prompt.
Others Terminology ● Encryption mode Others Terminology \ About IP address Setting for encrypting the flow of data during wireless communication. Following settings are available: Global IP address and local IP address None (Open System): No encryption. Setting will be unavailable and throughput will be improved. However, there is the risk of inforThere are 2 types of IP addresses: “global IP address” and “local IP address”. mation leakage.