JVC VIDEO CASSE'I-rE RECORDER HR-S5900U/5910U H R-S3900U/3910U i% HR-S5900U/5910U SuperVHSET HR-S3900U/3910U TRUCTIONS For Customer Use: Enter below the Model No. and Serial No. which are located on the rear of cabinet. Retain this information for future reference. Model No. Serial No.
EN Thank you for purchasing the JVC S-VHS video cassette recorder. Before use, please read the safety information Dear Customer, contained in the following pages to ensure safe use of your new VCR. CAUTIONS and precautions ] Declaration of Conformity Model Number :HR-S5900U HR-S5910U HR-S3900U RISK OFELECTRIC SHOCK DONOT OPEN HR-S3910U Trade Name Responsible CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
IMPORTANT PRODUCT SAFETY INSTRUCTIONS Electrical energy can perform many useful functions. But improper use can result in potential electrical shock or fire hazards. This product has been engineered and manufactured to assure your personal safety. In order not to defeat the built-in safeguards, observe the following basic rules for its installation, use and servicing. ATTENTION: 5. Ventilation Slots and openings in the cabinet are provided for ventilation.
EN USE SERVICING 1. Accessories 1. Servicing If your product is not operating correctly or exhibits a marked change in performance and you are unable to restore normal operation by following the detailed procedure in its operating instructions, do not attempt to service it yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
CONTENTS INSTALLING EN YOUR NEW VCR Basic Connections .................................. 6 SPECIAL EFFECT PLAYBACK 6 Special Effect Playback ........................ 28 Locating particular scene rapidly -- Picture Search ..................................................... 28 Viewing still picture -- Still Picture Playback ........... 29 Skipping unwanted portions --Skip Search ............. 29 Viewing still picture frame by frame -- Frame-by-Frame Playback ...................................
fN INSTALLING YOUR NEW VCR Basic Connections ANTENNA IN (Antenna or cable input) Antenna or cable Matching transformer VIDEO OUT AUDIO OUT / (not supplied) AC Power Cord Back of VCR S VIDEO OUT TV OUT AC Outlet S-video cable (supplied) To S-video input connector _l, (not supplied) _.
Check contents Set VCR channel Make sure the package contains all of the accessories listed in "SPECIFICATIONS" Press POWER to turn off the VCR and press STOP/ EJECT ( II/--_ ) on the front panel for more than 5 seconds. "3CH" appears on the display panel. PressCH + and - on the Remote to select "3CH" or "4CH" for only RF connection, "-CH" (OFF) for RF and AV connection, then press OK. • The VCR channel is preset to 3CH. Set to 4CH if 3CH is used for broadcasting in your area.
EN INITIAL Plug & Play Setting Auto Clock Set/Auto Tuner Set SETTINGS This VCR sets the clock and tuner channels automatically when AC power cord is first connected to an AC outlet. The antenna cable must be connected for the Plug & Play setting. The time and date can be set automatically by the clock setting data transmitted from one of the regular TV broadcast channels. We call this TV channel the "host channel" and it is a PBS channel in your area.
Language Setting Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV. This VCR offers you the language and some messages (excluding superimposed or French. on the TV screen) -- Select the desired The default il El language choice to view the on-screen in English, using the following Spanish procedure. setting is "ENGLISH". AccessMain Menuscreen Press MENU.
lO fN Clock Setting INITIAL Perform correctly clock setting only if the clock (cont.) has not been set by the Plug & Play setting or if you use a cable bOX. Access the Clock Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV. SETTINGS Manual Clock Set screen to perform Set. Each procedure after preparation steps below If you use a cable the Semiauto or starts from step [] are finished. box, set the clock manually. (_ pg.
Setting clock semiautomatically _ -- Semiauto ClockSet You can change the host setting manually. First follow steps [] to [] fol Iowing steps. channel/D.S.T./time on AUTO- zone 1 0, then page elect D.S.T. mode have three choices: You Select clock OFFTIME Press SHUTTLE 00 SUN to "D.S.T.', HOSTCN _"AU'I_' (CATV) D.S.T. : AUTO TIMEZONE :AUTO You can until select Daylight Saving D to move press the the SHUTTLE Time zone PLUS ZONE", repeatedly Each will be erased when "AUTO "D.
eN INITIAL SETTINGS (cont.) Set date PressSHUTTLE PLUS AV until the desired date appears, then press OK or SHUTTLE PLUS E>. • Holding SHUTTLE PLUS AV changes the date in 15-day intervals. Set year Press SHUTTLE PLUS AV until the desired year appears, then press OK or SHUTTLE PLUS E>twice. Select D.S.T. mode You can select either "ON" or "OFF". ON- Adjustment will be made by the built-in clock itself. OFF- Select when Daylight Saving Time does not apply to you.
Tuner Setting Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV. Setting channels automatically - AutoChannel Set Use Auto Channel Set only if channels have not been set correctly by the Plug & Play setting. If you want to add or delete channels, use Manual Channel Set (_7_ pg. 14). H AccessMain Menuscreen Press MENU.
fN INITIAL SETTINGS (cont.) AccessTunerSet screen PressSHUTTLE PLUS _,V to move the highlight bar (arrow) to "TUNER SET", then press OK or SHUTTLE PLUS E>. AccessManual ChannelSet screen PressSHUTTLE PLUS _,v to move the highlight bar (arrow) to "MANUAL CHANNEL SET", then press OK or SHUTTLE PLUS E>. O TUNER SET BAND AUTO CHANNEL SET CATV Add or skip desired channels ITo add channels I O Press the Number MANUAL CHANNEL SET keys to input a channel number want to add.
Cable Box The following procedure is required if you receive your TV channels through a cable box (descrambler). The Controller allows the VCR to automatically switch the cable box channel during timer recording. The Controller is effective for recording broadcasts that have been programmed using VCR Plus+ (_ pg. 30), Express timer programing (_ pg. 34) or 24HR quick programing (_7_ pg. 36). Control Setting NOTE: Suggested location Place the cable box on top of the VCR.
EN INITIAL SETTINGS (cont.) Access Main Menu screen on VCR Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV. Press MENU. AccessInitial Set screen Press SHUTTLE PLUS AV bar (arrow) to "INITIAL SHUTTLE PLUS _.
CABLE BOX BRAND _ AccessCable BoxBrandSet screen Press OK. Enter cable box brand Press the appropriate Number keys to enter the brand code from list shown to the then OK. press • If the cable channel the right, box's changes to 9, setting is complete Press OK and "CABLE BOX CONTROL returns then to the 1 DID YOUR CABLE BOX CHANGETO CHANNEL 09? NO it normal screen.
fN INITIAL DB$ Receiver Control Setting The following channels receiver. procedure through is required a DBS The Controller SETTINGS switch the DBS receiver's if you receive satellite (Direct allows (cont.) Broadcast Satellite) the VCR to automatically channels during timer recording. NOTES: • The Controller is not supplied with this unit. It can be Suggestedlocation Place the DBS (Direct of the VCR.
Access Main Menu screen on VCR Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV. Press MENU. AccessInitial Set screen Press SHUTTLE PLUS AV bar (arrow) to "INITIAL SHUTTLE PLUS _. !! to move the highlight SET", then press OK or AccessDBSReceiverSet screen Press SHUTTLE PLUS INITIAL SET AV to move the CLOCK SET LANGUAGE ENGLISH GUIDE CHANNEL SET CABLE BOX SET highlight bar (arrow) to "DBS RECEIVER SET", then press OK or SHUTTLE PLUS _.
fN INITIAL _ SETTINGS (cont.) AccessDBSReceiverBrandSet screen Press OK. Enter DBS Receiver's brand Press the appropriate DBSRECEIVER BRANDSET Number keys the to enter code from the brand following press The list, then OK. currently through the program received DBS receiver appears for about 10 seconds.
Basic Playback This VCR can check the tape condition during playback (and recording), and realizes the best possible pictures. il Load a cassette Make sure the window side is facing side is up, the rear label you and the arrow the cassette is pointing Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) the VCR. Do not apply too much pressure when on the TV. inserting. • The VCR turns on automatically.
fN BASIC PLAYBACK Basic AND RECORDING (cont.) Changingdisplayinformation Playback Press DISPLAY during Features clock playback. Each time you press the button, shows the time counter, the front display tape remaining panel time and the time in sequence. [ Time Counter 1--_ t__[ Tape Remaining Time ClockTime ]_-- • To display the VCR status including the tape remaining time, the time counter and the clock time on the TV screen, see "Showing on-screen display" (_ pg. 27).
Adjustingtrackingcondition Selectingmonitor sound -- Audio Monitor -- Tracking Adjustments Automatic tracking adjustment This VCR automatically adjusts the tracking condition. Whenever you insert a tape and start playback, automatic tracking starts working and continuously analyzes the signal to enable optimum picture quality during playback. You can select the desired monitor sound. While playing back a tape on which stereo sound or SAP sound is recorded, pressA. MONITOR on the Remote.
fN BASIC PLAYBACK AND RECORDING (cont.) Locatingbeginningof recordings-Index Search Index codes are placed each recording when find and automatically any recording 1 on the tape at the beginning recording play back from the beginning Start search press SHUTTLE PLUS Access distant code To access a recording press SHUTTLE of 2 to 9 index PLUS 14141or _ the correct number is displayed "SUPERIMPOSE" is set to "ON" REW ( of using the Index Search function.
Basic Recording El Select recordingchannel On the front panel: Push the JOG dial, then turn it to the left or right. On the Remote: a- Press CH + or-. b- Press the Number or Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV. • If you connect JOG dial keys. the TV and the VCR only the RF connection, press TV/VCR so that the VCR mode indicator POWER display using on the Remote lights on the front panel, to view the program to be recorded.
fN BASIC PLAYBACK Basic Recording Features AND RECORDING (cont.) Changingdisplayinformation Press DISPLAY during recording or recording pause. Each time you press the button, the front display panel shows the time counter, channel number, tape remaining time and the clock time in sequence. Time Counter ]--_ ClockTime ]_-- Tape Remaining Tim_ ChannelNo.
NOTES: Showingon-screendisplay When "SUPERIMPOSE" is set to "ON" (__7 _ pg. you can see the current VCR status on • For more detailed information about display, 1 see page the the 39, • 40), TV screen. on-screen 63. During recording or l" CH 125 OSD. RECORD • _ to the press are status displayed for 5 seconds. time counter • The indications HI-FI the elapsed time. • are not recorded. pause mode, allows during tapes are recommended forS-VHS tapes ET recordings.
fN SPECIAL Special Effect Playback Locating particularscene rapidly- PictureSearch • High-SpeedPictureSearch: You can rapidly On the front Possible PLAY ( I_ EFFECT PLAYBACK locate a particular scene on the tape. panel: during normal To do forward playback. picture search, turn the JOG dial quickly to the right. To do reverse to the left. picture search, turn the JOG dial quickly • If you release the dial, picture search continues.
How to use the SHUTTLE To do forward PLUS buttons on the Remote: picture search, press SHUTTLE viewing still pictureframe by frame - Frame-by-FramePlayback PLUS repeatedly. Each time you press the button, increases. • To decrease (toward the speed while normal playback, press SHUTTLE the search speed On the front During forward then picture search reverse picture Push the JOG dial or press PAUSE ( II ) to pause. search), PLUS 141_1repeatedly.
fN TIMER VCR Plus+ ® Timer Programing Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV. RECORDING Timer recording allows you to program the VCR to automatically record a broadcast at some future time. Up to 8 timer recording programs can be made using VCR Plus+ timer programing, Express timer programing (__7 _ pg. 34) or 24HR quick programing method (_-7 _ pg. 36) as far as a year in advance.
Returnto normal screen Input receivingchannelnumber The guide channel number, which is assigned to the TV or cable station for the PlusCode number that you entered in step R, will appear automatically on the Guide Channel Set screen. PressPROG. or OK. GUIDE CHANNEL SET "PROGRAM COMPLETED" appears on the screen for about 5 seconds, then normal screen appears. • If "PROGRAM NOT COMPLETED PROGRAM _" OVERLAP" appears, you have another program overlapping the program you have just made.
fN Changing VCR Plus+ ® Setting Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV. TIMER RECORDING (cont.) IMPORTANT If you have moved to a different area or if a broadcasting station's channel number has been changed, the wrong VCR CH or CABLE CH number will be displayed on the Program screen (_" step [] on page 31 ). When this happens, perform the following steps to set the correct guide channel number for that station.
eN33 Ill !i AccessMain Menu screen Inputreceivingchannelnumber Press MENU. Press the Number keys or SHUTTLE PLUS/xv AccessInitial Set screen Press SHUTTLE PLUS /xv to move the highlight "INITIAL MAIN MENU to input the number of the channel on which the guide channel's broadcasts are received, FUNCTION SET TUNER SET bar (arrow) to SET", then (Ex.) If WNJU(Ind.)is received on channel 47 then press OK or SHUTTLE PLUS E>. press OK or SHUTTLE PLUS E>. • Repeat steps [] and [] for each instance.
fN TIMER Express Timer Programing RECORDING (cont.) You can directly program the VCR's timer to record up to 8 broadcasts, as far as a year in advance. Remember, the clock must be set before you can program the timer (___ pg. 8 or 10). il Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV. Loada cassette Make sure the record safety tab is intact. If not, cover the hole with adhesive tape, then load it into the VCR.
Set tape speed NOTES: Press • Even ifa power SP/EP to set the tape speed. programs. Returnto normalscreen Press PROG. other menu settings As a result, or OK. failure However, when after the power "PROGRAM screen COMPLETED" for about 5 appears seconds, then on the normal restore OVERLAP" appears, overlapping The can page you Check now have program correct another appears and • Programs date. made.
EN TIMER 24HR Quick Programing RECORDING (cont.) You can program a timer recording that starts within 24 hours. Up to 8 timer recording programs can be made as far as a year in advance. Remember, the clock must be set before you can program the timer (_7_ pg. 8 or 10). Loada cassette Make sure the record safety tab is intact. If not, cover the hole with adhesive tape, then load it into the VCR. JOG dial • The VCR turns on, and the counter is reset, automatical ly.
TurnontheVCRandtheTV,andselect theVCR channel 3or4 (orAVmode) ontheTV. Checkingprogramsettings 1 Disengage timer Press TIMER, then • When "AUTO press POWER. TIMER" (_ pg. 40) is set to "ON", you do not have to press TIMER. 7 AccessProgramCheckscreen Press PROG. CHECK. _R STARTSTOP CH DATE 8:00P 10:00A 11:30P 3 10:00 10:45 1:00 12 40 125 12/24 12/25 12/25 AccessProgram screen Press PROG. CHECK again to check more detailed information. Each time you press PROG.
fN TIMER 3 RECORDING (cont.) Cancelor changeprogramsetting To cancel a program, press CANCEL PROGRAM 4 when the START Program screen you do STOP 9:00 PM DATE not want is shown. "PROGRAM --_ 10:00PM CR 12/24/00 sun 10 sP COMPLETED" appears on the screen for about 5 seconds, then normal screen appears.
Useful Function Settings Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV. You can use the other useful function settings on the Function Set screen by following the procedure described below. • For the functions you can set on the Function Set screen, see pages 40 to 43. H AccessMain Menuscreen PressMENU.
111'_ z-I'{J EN OTHER USEFUL * The • VIDEO CALIBRATION ON OFF default FUNCTIONS setting is bold (cont.) in the table below. When this function is set to "ON", this VCR checks the condition of the tape in use during playback and recording, and compensates to provide the highest-possible pictures. This takes place whenever you play back a tape or start recording after inserting a tape.
EN41 * The • AUTOSP -* EPTIMER ON OFF When this function mode to allow the entire default is set to "ON", complete program is bold in the table the VCR automatically recording while setting if there timer-recording is not enough switches below. to EP tape to record in SP mode. For Example...
fN OTHER USEFUL FUNCTIONS (cont.) * The default setting is bold in the table below. • AUDIO MONITOR HI-FI: Normally select this. Hi-Fi sound is played back. HI-FI L: Sound on the left Hi-Fi channel is played back. HI-FI R: Sound on the right Hi-Fi channel is played back. NORM: Sound on the normal track is played back. MIX: Both sounds on the Hi-Fi track and normal track are mixed and played back. This VCR can record two sound tracks simultaneously (normal and HiFi) on a Hi-Fi stereo tape.
* The default setting is bold in the table below. AV COMPU LINK Television This VCR II ToAVCOMPU LINKII (VCR ONLY) To S-VIDEO IN To REMOTE To S-VIDEO OUT PAUSE/ AV COMPULINK ,! ToAUDIO// VIDEO IN _-_ To AU DIO/ VIDEO OUT S-video cable (supplied) Audio/video cable (not supplied) Mini-plug cable (not supplied) • FRONT AUX INPUT VIDEO S-VIDEO This function is ONLY FOR HR-S5900U/5910U.
fN OTHER SatelliteAuto Recording USEFUL FUNCTIONS (cont.) This function allows you to automatically record a satellite program which is timer-programed on your DBS receiver. Preparation: Connect a DBS receiver to the AUDIO/ VIDEO IN or S VIDEO IN (L-l) connectors* on the rear; otherwise, you cannot use this function. • You can also connect the cable box if it has a timer. * To use these connectors, you have to select which one to use C__"pg. 43).
Child Lock You can disable • You can only the VCR operations. use the Remote for this operation. While the VCR is turned on, press and hold POWER the Remote for more than 10 seconds. The VCR turns off, and "CL" panel for about on appears on the front display 5 seconds, then the clock time appears again. )WER • The child lock function is now activated and you cannot turn on the VCR by pressing POWER on the front panel.
EN EDITING Edit From Camcorder I1 Connection This VCR (for recording) (HR-S5900U/5910U) To AUDIO/ VIDEO REMOTE PAUSE/ ! To rear panel AV COMPULINK connector Input &udio/video cable (not supplied) \ To S VIDEO Input* "-S-video Mini-plug cable (not supplied) (JVC camcorder only) cable (supplied) To Audio/video _ To EDIT Camcorder (for playback) * For HR-S3900U/3910U, the S VIDEO input connector is located on the rear panel.
You can use a camcorder as the playback VCR and your VCR as the recording VCR Set "AV COMPU-LINK" to "OFF" g • The REMOTE PAUSE/AV COMPU-LINK connector works as the Remote Pause Make connections Connect an audio/video camcorder's audio/video your VCR's audio/video • When Edit Control, from the camcorder. cable (not supplied to the left. • When output connect is equipped Connect with the procedure connector when Press MENU.
EN EDITING Edit To Or (cont.) Loadcassettes Insert the playback cassette into the playback VCR and the cassette to be recorded on into the From Another VCR recording VCR. Select input mode on recording VCR Select the correct external input on the other VCR.
Audio Dubbing El (ONLY FOR HR-S5900U/5910U) Loada cassetteand preparethe audio source Select input mode Select Connection "F-1" -- component when connecting to the audio the audio input connectors on the front panel. This VCR (for recording) Select %-1" -- component when connecting to the audio the audio input connectors on the rear panel. On the front panel: Push the JOG dial, then turn it to the left or right.
EN EDITING (cont.) Insert Editing Refer also to the other component's instruction manual for connection and its operations. and AV Dubbing Insert Editing: You can replace a recorded scene with new scene recorded on another tape or with other material. Both the picture and the sound recorded on the Hi-Fi sound track are replaced at the same time. (ONLY FOR HR-S5900U/5910U) Connection This VCR (for recording) Audio/Video Dubbing: You can perform Audio Dubbing and Insert Editing at the same time.
I11 Make connections Locate start point Connect an audio/video cable between the VCR's Use REW ((_) or JOG dial to reverse the tape (See "Special Effect Playback": _7_ pg. 28). When you find the begining of the scene you want to edit, press PAUSE( II ). audio/video input connectors and the other component's audio/video output connectors. Prepare tapes Activate editing mode Load the source tape on the other VCR, and the tape to be edited on this VCR. PressINSERT on the front panel.
2 fN MULTI-BRAND TV Brand Setting REMOTE CONTROL This Remote can control some functions of remote controllable TVs listed below. Without setting, you can control a JVC TV. il Turn on the TV Turn on the TV using the Power button on the TV or its Remote. Set TV brand code Follow the example shown below. O Pressand hold TV. O PressMBR SET. O Pressthe Number keys to enter your TV's brand code by referring to the table below. O PressOK, and release TV. The TV should turn off.
Cable Box This Remote can control some functions of the cable boxes listed below. Some cable box brands have more than one code. If your cable box does not function with a specified code, try other codes. Brand Setting g Turn on the cable box El Enter cable box brand code Turn on the cable box using the Power button on the cable box or its Remote. CABLE/DBS Follow the example shown below.
fN MULTI-BRAND DBS Receiver Brand Setting REMOTE CONTROL (cont.) This Remote can control some functions of the DBS (Direct Broadcast Satellite) receivers listed below. iI_ Turn on the DBS receiver Turn on the DBS receiver using the Power on the DBS receiver or its Remote. button Enter DBS receiver brand code Follow the example shown below. O Press and hold CABLE/DBS. O Press MBR SET. O Press the Number _l)@ )WER CABLE/DBS receiver's below.
Changing Remote Control Code This Remote is capable of transmitting two control codes; one set to respond to A code control signals and another set to respond to B code control signals. This Remote control is preset to send A code signals because your VCR is initially set to respond to A code signals. You can easily modify your VCR and the Remote to respond to B code signals. When using two JVC VCRs, set two VCRs and their Remotes to different codes, so that you can operate these VCRs separately.
fN Before requesting corrected, TROUBLESHOOTING service, use this chart and see if you can repair the trouble and this can save you the trouble of sending yourself. Small problems are often easily your VCR off for repair. 1. The power will not come on. • The AC power cord is disconnected. • Child lock is on. Connect the AC power cord. Turn off child lock function (_7_ pg. 45). 2. The clock works, but the VCR's power will not come on.
1.Timer recording willnotwork. • Theclock and/or thetimer have been setincorrectly. • The timerisnotengaged. • The VCR has notbeen setupproperly. Set the clock and/or timer correctly. Press TIMER and check to make sure that ® appears on the front display panel. Re-perform the set-up procedures. Make sure you have compensated for guide channel and VCR or cable box channel number mismatches (_7_ pg. 32). 2.Timer programing willnotwork. • Timer recording isinprogress. 3.
EN TROUBLESHOOTING (cont.) 1. When scanning channels, some of them are skipped over. • Those channels have been preset to be skipped. If you need the skipped channels, restore them (_7 pg. 14). 2. The channel cannot be changed. • Recording is in progress. Press PAUSE ( II ) to pause the recording, change channels, then press PLAY ( I_ ) to resume recording. 3. The Remote will not operate your TV or cable box or DBS receiver. • The brand codes are set incorrectly.
Questions and answers PLAYBACK RECORDING Q. What happens if the tape reaches its end during Q. playback A. The VCR automatically rewinds Q. Can the VCR indefinitely remain A. after 5 minutes No. It stops automatically the heads. A. in still mode? to protect picture search, still picture playback A. Picture loss occurs attempted with a tape recorded PLAY ( I_ ) to return to normal and A.
6 0 EN INDEX List of terms This guide serves as a quick way to locate frequently used terms and on-screen display names.
EN61 Frontpanel (HR-S5900U/5910U) Frontpanel (HR-S3900U/3910U) O POWER button : _7 pg. 21,25 O Cassette loading slot PLAY ( D ) button : _7 pg. 21 O Advanced JOG dial : _7 pg. 21,25, 28 S VIDEO input connector (ONLY FOR HR-S5900U/5910U) : _7 pg. 46, 50 O AUDIO/VIDEO input connectors :_7 pg. 49, 50 O S VHS ET button and lamp : _7 pg. 27 O REC LINK button and lamp : _7 pg. 44 O Front display panel : _7 pg. 62 Remote sensor INSERT button (ONLY FOR HR-S5900U/5910U): _7 pg. 51 A.
EN INDEX (cont.) Front display panel O Symbolic Mode Indicators PLAY: FF/REW VARIABLE SHUTTLE SEARCH: ii:::' STILL: SLOW: !::::iiiiii RECORD: .:"''t RECORD AUDIO DUBBING*: AUDIO DUBBING PAUSE: """q'i_'_ __..!-:..<....- PAUSE*: •".':":i'ii'i ;._....'._._ INSERT*: iC_ INSERT PAUSE*: iiiiii)iiiii[ AUDIO DUBBING INSERT*: ili:::ii: (- AUDIO DUBBING INSERT PAUSE*: -'i_:!_"_iii * ONLY FOR HR-S5900U/5910U. O Tape speed indicators O Program start time and stop time indicator : _7 pg.
EN63 Rear panel O AC power cord : _7 pg. 6 O CABLE BOX Controller connector : _7 pg. 15, 18 REMOTE PAUSE/AV COMPULINK terminal • REMOTE PAUSEterminal : _7 pg. 42, 46 • AV COMPULINK terminal : _7 pg. 42 OANTENNA IN terminal : _7 pg. 6 S VIDEO IN connector : _7 pg. 50 O S VIDEO OUT connector : _7 pg. 6 AUDIO/VIDEO IN connectors :_7 pg. 50 O AUDIO/VIDEO OUT connectors : _7 pg. 48 O TV OUT terminal : _7 pg.
EN INDEX (cont.) Remote O O O O O O O ¢ The glow-in-the-dark buttons shown in white on the illustration above are helpful when using the Remote in darkened rooms. Buttons with a small dot on the left side of the name can also be used to operate your TV while holding down TV on the Remote. (_7_ pg. 52). CABLE/DBS button : _7 pg. 53, 54 TV button: _7 pg. 52 TV/VCR button : _7 pg. 25, 26, 52 REVIEW button : _7 pg. 24 Number buttons : _7 pg. 25, 30, 33 DBS button : _7 pg. 35 CANCEL button : _7 pg.
SPECIFICATIONS EN GENERAL Power requirement Power consumption Power on Power off Temperature Operating Storage Operating position Dimensions (W x H x D) Weight Format Maximum recording time 65 TIMER :AC120V,_ ,60Hz Clock reference Program capacity : Quartz : 1-year programmable timer/ 8 programs Memory backup for timer is not supported. :20W :2.
EN FOR SERVICING HOW TO LOCATE YOUR JVC SERVICE TOLL FREE: Dear customer, (Only in U.S.A.) CENTER 1-800-537-5722 http://www.jvc.com In order to receive the most satisfaction from your purchase, please read the instruction booklet before operating the unit. In the event that repair is necessary, or for the address nearest your location within the Continental United States, please call 1-800-537-5722 for your nearest authorized servicer or visit our website at www.JVC.com.
WARRANTY (Only in U.S.A.) EN LIMITED WARRANTY 67 CONSUMER VIDEO 1-90 JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONLY TO THE ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date of original retail purchase for the period as shown below.
ZZ oo oo Cc _0_0 oo cc JVC VICTOR COMPANY COPYRIGHT@ 2001 VICTOR COMPANY OF JAPAN, LTD.
