COLOR VIDEO MONITOR TM-2000SU TM-1600SU INSTRUCTIONS For Customer Use: Enter below the Model No. and Serial No. which is located on the rear of the cabinet. Retain this information for future reference. Model No. Serial No.
Thank you for purchasing this JVC color video monitor. Before using it, read and follow all instructions carefully to take full advantage of the monitor's capabilities. SAFETY PRECAUTIONS WARNING : FCC INFORMATION (U.S.A. only) TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS MONITOR TO RAIN OR MOISTURE. CAUTION: Changes or modification not approved by JVC could void the user's authority to operate the equipment. CAUTION : To reduce the risk of electric shock, do not remove cover.
CONTENTS SAFETY PRECAUTIONS .......................................................................................... 2 CONTROLS AND FEATURES ................................................................................... 4 HOW TO HANDLE BASIC OPERATIONS ................................................................ 6 HOW TO USE THE MENU FUNCTIONS ................................................................... 7 HOW TO INITIALIZE THE SETTING .......................................................
CONTROLS AND FEATURES FRONT VIEW [TM-2000SU] – B + Y/ C A VIDEO VIDEO ON OFF PHASE TM-2000SU CHROMA BRIGHT CONTRAST MENU INPUTSELECT VOLUME/SELECT POWER [TM-1600SU] – + B Y/ C A VIDEO VIDEO ON OFF TM-2000SU PHASE CHROMA BRIGHT CONTRAST MENU VOLUME/SELECT INPUTSELECT POWER – + B Y/ C A VIDEO VIDEO (Front view of TM-2000SU shown) ON OFF TM-1600SU 1 Phase button [PHASE PHASE ] Press this button to set the picture hue adjustment mode.
REAR VIEW A IN OUT IN OUT VIDEO B IN A IN OUT IN OUT VIDEO Y/ C B IN Y/ C OUT OUT A IN OUT B IN OUT REMOTE IN OUT AUDIO A IN OUT B IN OUT REMOTE IN OUT AUDIO To AC outlet (120 V AC, 50/60 Hz) 16 Video A terminals [VIDEO A IN/OUT] Video signal input (IN) and output (OUT) terminals. The output terminal is bridge-connected.
HOW TO HANDLE BASIC OPERATIONS BASIC OPERATION Color system indication (PAL or NTSC) 1. Press the POWER switch to turn on the power. _ON : Power turns ON. (Power indicator: lit) —OFF : Power turns OFF. (Power indicator: unlit) ON OFF NTSC POWER 2. Press the INPUT SELECT button to choose input. Selects video/audio signals input to terminals on the rear panel.
HOW TO USE THE MENU FUNCTIONS DISPLAY AND SELECTION IN THE
HOW TO USE THE MENU FUNCTIONS (cont'd) DISPLAY AND SELECTIONS IN THE MODE (SETTING) screen You can set the following set-up menu items. ● H. POSITION ● V. POSITION ● WHITE BALANCE ● CONTROL LOCK ● B.P.S. LEVEL ● REMOTE SELECT 1 ‰ H. POSITION : 00 V. POSITION : 00 WHITE BALANCE CONTROL LOCK : OFF B. P. S. LEVEL : 10 REMOTE SELECT : OFF Notes: ● Parameters for H. POSITION and V.
Set-up menu items H. POSITION V. POSITION WHITE BALANCE DRIVE Purpose Settings Adjusts the horizontal position of the screen (+ : Horizontal position shifts to the right/–: Horizontal position shifts to the left) –09 –08 •••••• –01 00 +01 • • • • • • +08 +09 Adjusts the vertical position on the screen (+: Vertical position moves down/–: Vertical position moves up) –09 –08 •••••• –01 00 +01 • • • • • • +08 +09 Adjusts the white balance Selects DRIVE (DRV) or CUT OFF (CUTO) adjustment.
HOW TO INITIALIZE THE SETTING SCREEN DISPLAY AND SELECTIONS IN THE RESET MODE You can set and screen items, picture adjustment items and the volume level to their factory-set (initial) values. RESET screen RESET 1. Press the Power ( OFF (—).
BASIC CONNECTION EXAMPLE Notes: ● Before connecting your system, make sure that all units are turned off. ● The illustration below shows some examples of different connections. Terminal connections may differ depending on the component connected. Be sure to refer to the instructions provided with the unit(s) you are connecting. ● Each pair of input (IN) and output (OUT) terminals are bridge-connected.
7 VIDEO B (VIDEO) Connection Example (Select Input B (VIDEO) button) A Video Camera IN OUT IN OUT Video Video (Video signal cable) (Video signal cable) VIDEO B VCR IN Y/ C OUT Video Monitor A IN OUT B IN OUT REMOTE IN OUT Audio AUDIO Audio (Audio signal cable) Video Monitor (Audio signal cable) VCR External control switch REMOTE open circuit (open) RCA pin REMOTE (Remote cable) short circuit (short) (Remote cable) – + B Y/ C A VIDEO VIDEO _ON —OFF TM-2000SU External
TROUBLESHOOTING Solutions to common problems related to your monitor are described here. If none of the solutions presented here solves the problem, unplug the monitor and consult a JVC-authorized dealer or service center for assistance. Problems Points to be checked Measures (Remedy) No power supply. Is the power plug loosened or disconnected? Firmly insert the power plug. No picture with the power on. Is the video signal output from the connected component? Set the connected component correctly.
SPECIFICATIONS MODEL TM-2000SU TM-1600SU Color video monitor PAL, NTSC (3.58) Type Color system 20" measured diagonally, flat-square type, 90° deflection, in-line gun, vertical line trio type (phosphor stripe pitch 0.69 mm) Picture tube Effective screen size Width Height Diagonal 16" (406.4 mm) 12" (304.8 mm) 20" (508 mm) 16" measured diagonally, flat-square type, 90° deflection, in-line gun, vertical line trio type (phosphor stripe pitch 0.
7 Dimensions [TM-2000SU] Unit : inch (mm) < Side View > < Front View > 1/16 (1.3) 18-7/8 (479) + B Y/ C A VIDEO VIDEO ON OFF CHROMA BRIGHT CONTRAST MENU 16-1/8 (407.5) * 16-1/2 (416.4) VOLUME/SELECT INPUTSELECT 1/8 (3) – PHASE TM-2000SU 3/8 (9.5) 2 (50.2) 1/8 (3) * 12-1/2 (314.8) 18-3/4 (476) POWER 3/16 (3.5) 4-1/4 (105) 5-3/8 (135) 5-1/8 (128.5) 15-1/8 (382.8) 19-3/8 (492) * Asterisks (∗) are used to indicate front panel dimensions.
TM-2000SU/TM-1600SU COLOR VIDEO MONITOR JVC PROFESSIONAL PRODUCTS COMPANY DIVISION OF US JVC CORP. 1700 Vallery Road Wayne, NJ07470 JVC CANADA INC.