. Head Mounted Display Set up HMD-VS1W HMD-VS1DW Getting Started INSTRUCTIONS Operate Adjust/Set . Maintenance Thank you for purchasing this JVC product. Please read this “INSTRUCTIONS” prior to use to ensure proper use of this unit. Be sure to read the (pages P. 4 to P. 8) especially for safe use of this unit. Troubleshooting For Customer use : Enter below the serial No. which is located on the body. Retain this information for future reference. Others Model No. HMD-VS1W, HMD-VS1DW Serial No.
Contents Getting Started Getting Started Accessories ............................................................. 3 Check the Accessories ........................................ 3 Safety Precautions .................................................. 4 Warning ................................................................... 8 Precautions ............................................................. 8 Name of Parts ....................................................... 12 Front .......................
Accessories Getting Started Check the Accessories AC adapter ............................................................................. 1 piece Power cord (for use in the U.S.) .............................................. 1 piece Power cord (for use in Europe) ............................................... 1 piece 0 This product also comes with a safety precautions guide. 0 Be sure to read the “Safety Precautions” before using this equipment.
Safety Precautions These are general Important Safety Instructions and certain items may not apply to all appliances. Important Safety Instructions 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Ces informations sont des CONSIGNES DE SÉCURITÉ IMPORTANTES et certains points peuvent ne pas s’appliquer à tous les appareils. CONSIGNES DE SÉCURITÉ IMPORTANTES 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Lire ces instructions. Conserver ces instructions. Tenir compte de tous les avertissements. Respecter toutes les instructions. Ne pas utiliser cet appareil à proximité de l’eau. Ne nettoyer qu’avec un chiffon sec. Ne pas boucher les ouvertures de ventilation.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
CAUTION: Attention: WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. AVERTISSEMENT : POUR EVITER LES RISQUES D’INCENDIE OU D’ELECTROCUTION, NE PAS EXPOSER L’APPAREIL A LA PLUIE NI A L’HUMIDITE. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
Warning 0 As the power plug (main plug) is used to disconnect the unit from the wall outlet (mains), connect the unit to an easily accessible AC outlet. 0 Should you notice an abnormality in the unit, disconnect the power plug (main plug) from the AC outlet (mains) immediately. 0 The set is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet (mains), even if the set itself has been turned off.
Supplier's Declaration of Conformity Model Number: HMD-VS1W, HMD-VS1DW JVC Trade Name: JVCKENWOOD USA Responsible Corporation party: 1440 Corporate Drive, Address: Irving, TX 75038 678-449-8879 Telephone Number: Déclaration de conformité du fournisseur HMD-VS1W, Numéro de HMD-VS1DW modèle : Nom de marque : JVC JVCKENWOOD USA Personne Corporation responsable : 1440 Corporate Drive, Adresse : Irving, TX 75038 678-449-8879 Numéro de téléphone : This device complies with Part 15 of the FCC Rules.
WARNING: ATTENTION : This equipment is compliant with Class A of CISPR 32. In residential environment this equipment may cause radio interference. Cet équipement est conforme aux exigences de la classe A de la CISPR 32. En environnement résidentiel, cet appareil peut être à l’origine d’interférences radio. CAUTION: Where there are strong electromagnetic waves or magnetism, for example near a radio or TV transmitter, transformer, motor, etc., the picture and the sound may be disturbed.
ENGLISH Information for Users on Disposal of Old Equipment and Batteries [European Union only] These symbols indicate that equipment with these symbols should not be disposed of as general household waste. If you want to dispose of the product or battery, please consider the collection systems or facilities for appropriate recycling. Battery Products Notice: The sign Pb below the symbol for batteries indicates that this battery contains lead.
Name of Parts Getting Started Front A Half-mirror B Sensor Cover C Cable D Smoke Panel E Rear Pad 12
Getting Started Rear F Sensor Unit G Forehead Pad H Face Pad I Nose Pad J Rear Cover K Side Belt L Adjustment Band M Cable Hook N Belt Adjustment Dial O Power Switch P Audio Output Terminal Q Forehead Adjustment Dial R Firmware Update Button 13
Putting on Precautions during Use This unit is a precision device. Please refrain from using it at locations that are subject to humidity, dust or oily smoke. Otherwise, it may cause fire or malfunction. Putting on the Head-mounted Display Set up 1 Loosen by turning the belt adjustment dial and forehead adjustment dial in the anticlockwise direction. 2 Lift the rear cover as illustrated in the diagram, followed by tilting the side belt upward. 3 Put on the unit from the front of the face and hold it.
Lower the rear cover until the side belt is level as illustrated in the diagram. 5 Turn to adjust the belt adjustment and forehead adjustment dials until the headset fits snugly. 6 Adjust the hook-and-loop fastener of the adjustment band until it fits snugly on the top of the head. Set up 4 * The adjustment band is elastic. Tightening the band can help to achieve greater comfort.
MEMO 0 If you are wearing glasses, open the face pad slightly wider as illustrated in the diagram for greater comfort when wearing the unit. 0 Although the design of this product has taken the use of glasses into consideration, it does not guarantee compatibility with all types of glasses. The glasses you are using may not be compatible with this product depending on the shape and size. Set up When cable is disconnected If the cable is disconnected, follow the illustration below to connect it.
Connection 0 The connection procedures differ according to the device used. For details, please refer to the instruction manual of the device to be connected. 0 Some cables cannot be connected to this unit due to the size of their connector cover. Connecting with a PC PC, etc. Set up DisplayPort Cable (2 pcs) DisplayPort Terminal USB Terminal USB cable 0 Connect the two DisplayPort cables connected to this unit to the DisplayPort terminals of the PC.
Initial Configuration 1 Download and install the software programs The following software programs are needed for the use of this unit. 0 NVIDIA GeForce driver Download and install NVIDIA GeForce Game Ready Driver 461.72 or a later version from the official NVIDIA website. 0 Steam Go to the official Steam website, click on “Install Steam” to download the setup file, followed by running the file and following the instructions on the screen to install the Steam software. Set up https://store.
3 Installing SteamVR Base Station 2.0 As illustrated in the diagram below, install two SteamVR Base Station 2.0 units at a height of 2 m and a distance of 2 m from each other at the two corners in front of the space for using the system. Use this unit at a seated position (height of approx. 1.25 m) that is 1 m away from the center of the two SteamVR Base Station 2.0 units. * Ensure a height difference of at least 0.5 m between this unit and the SteamVR Base Station 2.0 units during use.
Viewing Videos Initialization of the settings is needed before using this unit. Before using this unit, refer to “Initial Configuration” (P. 18) to initialize the settings. 1 Turn on the power Turn on the power switch of this unit. OFF Operate 2 ON Launch the SteamVR app Room setup is needed during the first startup. Upon launching the SteamVR app, a video image is displayed.
4 Put on this unit Refer to “Putting on” (P. 14) to put on this unit. 5 Turn off the power After using, exit the SteamVR app before turning off the power switch. OFF ON *2 To power on again after turning off the power, allow a time interval of at least 5 seconds before doing so. *3 If the power of the unit is turned off or the AC adapter is disconnected while SteamVR is running, a message prompting you to restart the HMD-VS1W driver will appear on the PC screen.
About the Software The IPD adjustment software and HMD configuration software will also be installed together with the HMD-VS1W driver. (Refer to P. 18 “Initial Settings”) Before using the software, make sure to refer to “Initial Settings” (P. 18) and initialize the settings. IPD Adjustment Software Below are the functions for adjusting the interpupillary distance (IPD). Note that the image may appear out of focus or it may cause strain to the eyes if the IPD is not correctly set.
HMD Configuration Software Use the HMD configuration software after connecting this unit to a PC and turning on the power. Brightness Below are the functions for configuring the brightness. Adjust/Set A Brightness/System Tab For switching between Brightness and System. B Brightness Settings Display/Preset Switching Displays the brightness settings of the left and right panels on the head-mounted display. The preset values selected from the drop-down list are reflected in the head-mounted display.
Predetermined settings Below are the functions for configuring the name of the preset brightness. Adjust/Set G Preset Name Settings For configuring the name for each of the presets from 1 to 4. The brightness configured for each of the presets is displayed in the respective fields. Pressing Set reflects the configured preset name.
System H Switch System For configuring whether for this unit to recognize SteamVR as a head-mounted display (HMD) or as a controller. * When switching between HMD/Controller, do not connect a SteamVR Tracking System 2.0 equipment other than this unit to the USB terminal. Doing so may damage the data on the equipment. I Switch Refresh Rate For switching the refresh rate for the panel of the head-mounted display. Pressing “Save” at the bottom reflects the settings.
Information N version Adjust/Set Displays the version of this software. O Serial number Displays the serial number of this unit. P No. of startups Displays the number of times the power of this unit has been turned on. Q Illumination time Displays the panel display time of this unit. R Firmware version Displays the firmware version of this unit. S DP driver version left Displays the firmware version of the IC (left) inside this unit.
Servicing of the HMD Unit 0 Always keep the product clean. 0 Because lenses such as half mirrors are coated, rubbing with a hard object may cause scratches. 0 If the product becomes dirty, follow the procedure below. 1) Blow off the dust on the surface Use a manual pump-type air blower or a soft-bristle brush for lenses to remove dust on the surface. Do not use a spray can type air duster. The gas may affect the performance of this product.
Replacement of Consumable Parts Forehead and Face Pads 0 The forehead and face pads can be attached to this unit using a fastener. Lift the pad carefully at the edge of the soft portion to detach it from the unit. To attach a new forehead or face pad, press gently while ensuring that the fastener on the pad coincides with the fastener on the unit. Rear Pad 0 The rear pad can be attached to the rear cover unit using a double-sided tape.
Nose Pad 0 The nose pad can be attached to this unit using a hook. Lift the pad carefully at the edge of the soft portion to detach it from the unit. To attach a new nose pad, hook the protruded part of the nose pad to the hole on the unit. Adjustment Band 0 To replace the adjustable band, do so after removing the forehead pad. Turn the forehead adjustment dial counterclockwise to detach the forehead pad along with the base of the forehead pad.
3 After attaching the new adjustment band, press the forehead pad and turn the forehead adjustment dial clockwise to attach it. Protect Filter (HMD-VS1DW) Removing the Protect Filter 1 Push the edge of the Protect Filter in the direction indicated by the arrow. 2 The Protect Filter will be raised. Pull the raised portion. 3 Perform the same steps for the opposite edge of the Protect Filter and the lock at the lower end will be disengaged.
Attaching the Protect Filter 1 Align the indentation on the Protect Filter with the protrusion on the main unit. 2 Bend the Protect Filter and insert both edges of it into the guide of the main unit. Guide Guide Guide Guide Align the indentation and protrusion. 3 Push the Protect Filter toward the lower lock. 4 Push the Protect Filter towards the upper two locks.
Disinfection of Product “Alcohol (ethanol) disinfectants” and “alcohol-type (ethanol) wet tissues” available commercially can be used if the following precautions are complied with. 0 Do not wet the openings (external connection terminals, vents, etc.), gaps inside this unit and the interior face of the rear cover with disinfectants. 0 Use disinfectants and wet tissues that do not contain chlorine or chlorine-based additives.
Long-term Storage 0 For prolonged storage of the unit at a place with an indoor temperature of 35°C and humidity of 60% or higher, it is recommended that you keep it in an airtight bag together with desiccants. 0 Replace the desiccants once a year. The desiccants will need to be replaced at shorter intervals if the storage environment is extremely humid. * For more information on the desiccants and airtight bag to be used, please consult our authorized dealer or customer service center.
Troubleshooting Power is not supplied Check Is the power cord disconnected? Reference Page Action Insert the power cord (plug) properly. P. 17 Video image does not appear or appears distorted Check Is the power of the devices (PC, etc.) turned on? Reference Page Action Turn on the power of the devices (PC, etc.). P. 17 Are the devices (PC, etc.) properly connected? Connect the devices (PC, etc.) properly. P. 17 Are the correct signals being output from the device (PC, etc.
No sound is heard Check Action Reference Page Are the headphones correctly connected? Connect the headphones or earphones correctly to the P. 20 audio output terminal. Are the correct signals being output from the device (PC, etc.)? Configure the devices (PC, etc.) correctly. P. 17 Unable to change the IPD value using the IPD adjustment software Check Action Reference Page Is the power of the unit turned on? Turn on the power of the connected devices. P.
Use of Commands It is possible to control this unit by connecting it to a PC using a USB cable. Required environment Windows10 Terminal software 1 Connect this equipment and PC with USB cable For the first connection, the driver will be installed automatically. (For Windows10) Make sure you have “USB Serial Device (COMx)” in “Ports (COM and LPT)” in Device Manager. 0 2 “x” changes depending on the environment. Start the terminal software Connect to “USB serial device (COMx)” with any terminal software.
List of Commands * r…Right panel operation, l…Left panel operation Command Abbreviation state st framerate fr directmode arg1 arg2 arg3 arg4 Output Description r/l - - - STATE_NONE STATE_WAITCABLE STATE_CONNECTING STATE_NORMAL - - - - 60/72 60/72 - - - - - - - - off/on on/off - - - - dm time tm - - - - 12h34m count cnt - - - - 123 You can get the status of each panel. STATE_NONE: The power switch is off.
Specifications Product Name Head Mounted Display Model Name HMD-VS1W, HMD-VS1DW Display Device/Resolution 5.5", 2560 × 1440 × 2 Refresh Rate 60 Hz / 72 Hz Color Gamut sRGB 100% (area ratio) Optical System Half-mirror + Combiner Angle of View H: 120° V: 45° (V: 72° with open view) Interpupillary Distance Adjustable using IPD adjustment software Input Compatibility Signal Input/Output 1440×2560(WQHD) 60Hz/72Hz Video/Audio Input Terminal PC: DisplayPort 1.2 × 2 (Supports HDCP2.
About Trademarks and Copyrights Intel and Intel Core are trademarks of Intel Corporation in the United States and/or other countries. NVIDIA and GeForce RTX are trademarks or registered trademarks of NVIDIA Corporation. HTC Vive is a trademark or registered trademark of HTC Corporation. Steam and SteamVR are trademarks of Valve Corporation in the United States and/or other countries. Windows is a trademark of Microsoft Corporation in the United States.
Index A AC adapter................................................................ 3 N No. of startups......................................................... 26 Accessories...............................................................3 Nose Pad.................................................................13 Adjust the volume level............................................20 NVIDIA GeForce driver............................................18 Adjustment Band............................................
1222KSH-SW-XX © 2021 HMD-VS1W/HMD-VS1DW Head Mounted Display .