Filename [HDS1EU_Cov1.fm] HDS1EU_Cov1.fm Page 1 Thursday, June 21, 2001 5:38 PM ENGLISH CONTENTS SAFETY FIRST 2 Safety Precautions .....................................2 INDEX INSTALLING YOUR NEW RECORDER HDD & S-VHS VIDEO RECORDER 5 12 Basic Connection ....................................12 S-VIDEO Connection ...............................13 INITIAL SETTINGS 14 Auto Set Up .............................................14 Preset Download .....................................16 Language ...........
Filename [HDS1EU_0_Safety.fm] HDS1EU_.book Page 2 Thursday, June 21, 2001 12:30 PM 2 EN Masterpage:Left-FullCol SAFETY FIRST Safety Precautions The rating plate and the safety caution are on the rear of the unit. WARNING: DANGEROUS VOLTAGE INSIDE WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. CAUTION 8 When you are not using the recorder for a long period of time, it is recommended that you disconnect the power cord from the mains outlet.
Filename [HDS1EU_0_Safety.fm] HDS1EU_.book Page 3 Thursday, June 21, 2001 12:30 PM Masterpage:Right-Full-NoTitle0 EN 3 For Italy: “It is declared that this product, brand JVC, conforms to the Ministry Decree n. 548 of 28 Aug.’95 published in the Official Gazette of the Italian Republic n. 301 of 28 Dec.’95” The STANDBY/ON 1 button does not completely shut off mains power from the unit, but switches operating current on and off. “`” shows electrical power standby and “!” shows ON.
Filename [HDS1EU_0_Safety.fm] HDS1EU_0_Safety.fm Page 4 Thursday, June 21, 2001 7:56 PM 4 EN Masterpage:Left-FullCol SAFETY FIRST (cont.) PRECAUTION FOR Hard Disk Drive 1. Before installing the recorder This recorder has a built-in hard disk drive, which is a device to read minute magnetic changes. The inside of the device is precision-built, which, when installing the recorder, requires you to note the following: ● DO NOT use the recorder in a location prone to vibration or dust.
Filename [HDS1EU_1.fm] Masterpage:Right HDS1EU_.book Page 5 Thursday, June 21, 2001 12:30 PM EN INDEX 5 FRONT VIEW SAT S-VHS ET HDD S-VHS VIDEO (M) L – AUDIO – R MENU NAVIGATION OK S-VIDEO CH A. DUB PAUSE F-1 A STANDBY/ON 1 Button 墌 pg. 14 B Infrared Beam Receiving Window C Hard Disk Drive Illumination D MENU Button 墌 pg. 18 E SAT# Button 墌 pg. 47 F HDD Button 墌 pg. 22 G Stop 8 Button 墌 pg. 22 H Play 4 Button 墌 pg. 23 I Pause 9 Button 墌 pg. 23 J Record 7 Button 墌 pg.
Filename [HDS1EU_1.fm] Masterpage:Left HDS1EU_.book Page 6 Thursday, June 21, 2001 12:30 PM 6 EN INDEX (cont.) REAR VIEW ANTENNA ANTENNE IN ENTREE AV1 (L-1) IN/OUT ENTREE/SORTIE OUT S SORTIE AUDIO L SAT CONTROL CONTROLEUR SAT OUT SORTIE R OUT SORTIE AV2 (L-2) IN/DECODER ENTREE/DECODEUR A ANTENNA IN Connector 墌 pg. 12 B AV1 (L-1) IN/OUT Connector 墌 pg. 12, 66, 70, 71, 72 C S OUT Connector 墌 pg. 13 D Mains Power Cord 墌 pg. 12 Page 6 E ANTENNA OUT Connector 墌 pg.
Filename [HDS1EU_1.fm] Masterpage:Right-NoTitle0 HDS1EU_1.fm Page 7 Thursday, June 21, 2001 7:05 PM EN 7 FRONT DISPLAY PANEL SP VCR VPS/PDC A B.E.S.T. Picture System Display 墌 pg. 41 B Symbolic Mode Indicators PLAY: FF/REW VARIABLE SEARCH: STILL: SLOW: RECORD: RECORD PAUSE: AUDIO DUBBING: C Recording Speed Indicators 墌 pg. 22 D “Timer” Indicator 墌 pg. 43, 45 E Tape Remaining Time Indicator 墌 pg. 38 F VPS/PDC Indicator 墌 pg. 45 G S-VHS Indicator 墌 pg.
Filename [HDS1EU_1.fm] Masterpage:Left HDS1EU_.book Page 8 Thursday, June 21, 2001 12:30 PM 8 EN INDEX (cont.) ON-SCREEN DISPLAY (for HDD deck) When “O.S.D.” is set to “ON” (墌 pg. 78), various operational indicators appear on the TV screen. When playing back a recorded programme 1 3 2 06/12 TUE PLAY 4 0:59:24 0:00 10:07 1:00 4 LP PR.
Filename [HDS1EU_1.fm] Masterpage:Right-NoTitle0 HDS1EU_.book Page 9 Thursday, June 21, 2001 12:30 PM EN 9 ON-SCREEN DISPLAY (for VHS deck) When “O.S.D.” is set to “ON” (墌 pg. 78), various operational indicators appear on the TV screen. H Type of Broadcast 墌 pg. 40 I VHS Indicator J Current Day/Month/Year K Clock Display L Channel Position Number and Station Name/ Auxiliary Input Indicator (L-1, L-2, F-1, DUB or SAT*) * When “L-2 SELECT” is set to “SAT” (墌 pg.
Filename [HDS1EU_1.fm] HDS1EU_1.fm Page 10 Thursday, June 21, 2001 7:29 PM 10 EN REMOTE CONTROL Buttons with a small dot on the left side of the name can also be used to operate your TV. (墌 pg. 49) Page 10 Masterpage:Left INDEX (cont.) A LCD Panel 墌 pg. 42 B HDD Button 墌 pg. 22 C TV/CABLE/SAT Button 墌 pg. 49, 50 D AUDIO Button 墌 pg. 28, 36 ^ (TV Muting) Button 墌 pg. 49 E LCD PROG Button 墌 pg. 42 F Number Keys 墌 pg. 22, 42 G DAILY Button 墌 pg. 43, 45 H VPS/PDC Button 墌 pg.
Filename [HDS1EU_1.fm] HDS1EU_.book Page 11 Thursday, June 21, 2001 12:30 PM Masterpage:Right-NoTitle0 EN 11 How To Use The remote control can operate most of your video recorder’s functions, as well as basic functions of TV sets and satellite receivers of JVC and other brands. (墌 pg. 49, 50) ● Point the remote control toward the receiving window. ● The maximum operating distance of the remote control is about 8 m.
Filename [HDS1EU_1.fm] Masterpage:Left HDS1EU_.book Page 12 Thursday, June 21, 2001 12:30 PM 12 EN INSTALLING YOUR NEW RECORDER Basic Connection Aerial connector Back of TV TV aerial cable It’s essential that your video recorder be properly connected. THESE STEPS MUST BE COMPLETED BEFORE ANY VIDEO OPERATION CAN BE PERFORMED. A Check the contents. Make sure the package contains all of the accessories listed in “SPECIFICATIONS” on page 98. B Situate the recorder.
Filename [HDS1EU_1.fm] Masterpage:Right-NoTitle0 HDS1EU_.
Filename [HDS1EU_2.fm] Masterpage:Left HDS1EU_.book Page 14 Thursday, June 21, 2001 12:30 PM 14 EN INITIAL SETTINGS Auto Set Up Before starting, make sure of the following: Auto Channel Set/Auto Clock Set/ Auto Guide Program Number Set After the 1 button on the recorder or remote control is pressed for the first time to power on the recorder, by simply selecting your country*, the Auto Set Up function sets the tuner channels, clock** and Guide Program numbers automatically.
Filename [HDS1EU_2.fm] Masterpage:Right-NoTitle0 HDS1EU_.book Page 15 Thursday, June 21, 2001 12:30 PM EN C Select the language. Press OK. The Language Set display appears on the front display panel and/or on the TV screen. On the front display panel Press rt to select your language code. Language Code ENGLISH DEUTSCH FRANCAIS ITALIANO CASTELLANO : : : : : 01 02 03 04 05 NEDERLANDS SVENSKA NORSK SUOMI DANSK : : : : : 06 07 08 09 10 (Example) DEUTSCH (02) is selected for SUISSE (41).
Filename [HDS1EU_2.fm] Masterpage:Left HDS1EU_.book Page 16 Thursday, June 21, 2001 12:30 PM 16 EN Preset Download Auto Channel Set by Downloading from TV/Auto Clock Set/Auto Guide Program Number Set ATTENTION You can use this function only with a TV offering T-V Link, etc.* Be sure to use a fully-wired 21-pin SCART cable. * Compatible with TVs offering T-V Link, EasyLink, Megalogic, SMARTLINK, Q-Link or DATA LOGIC via fully-wired 21-pin SCART cable.
Filename [HDS1EU_2.fm] Masterpage:Right-Full-NoTitle0 HDS1EU_.book Page 17 Thursday, June 21, 2001 12:30 PM EN 17 Results of Auto Set Up/Preset Download appear on the front display panel If both Auto Channel Set and Auto Clock Set have been performed successfully, the correct current time is displayed. Turn on the TV and select its AV mode, then make sure that all necessary stations have been stored in the recorder’s memory by using the PR button(s). ● If station names (ID – 墌 pg.
Filename [HDS1EU_2.fm] Masterpage:Left HDS1EU_.book Page 18 Thursday, June 21, 2001 12:30 PM 18 EN Language Turn on the TV and select the AV mode. INITIAL SETTINGS (cont.) This recorder offers you the choice to view on-screen messages in 10 different languages. Though Auto Set Up selects the language automatically (墌 pg. 17), you can change the language setting manually as required. A Access the Main Menu screen. Press MENU. B Access the Tuner Set screen.
Filename [HDS1EU_2.fm] Masterpage:Right HDS1EU_.book Page 19 Thursday, June 21, 2001 12:30 PM EN SAT CONTROL SET Satellite Receiver Control Setting Satellite receiver 19 The following procedure is required if you receive satellite channels through a satellite receiver. Approximately 20 seconds before the SHOWVIEW timer programming (墌 pg. 42) or Express timer programming (墌 pg.
Filename [HDS1EU_2.fm] Masterpage:Left HDS1EU_.book Page 20 Thursday, June 21, 2001 12:30 PM 20 EN SAT CONTROL SET (cont.) C Access the Initial Set screen. A Press w e to move the arrow to “INITIAL SET UP”, then press t or OK. B Press w e to move the arrow to “INITIAL SET”, then press OK.
Filename [HDS1EU_2.fm] Masterpage:Right-2lineTitle0 HDS1EU_.book Page 21 Thursday, June 21, 2001 12:30 PM SAT CONTROL SET (cont.) T-V LINK G Check the result of the test. If the satellite receiver’s channel number has been changed to the same one as you set in step F ... Press rt to move the highlight bar (pointer) to “CHANGED TO ...”, then press OK or e to finish the Sat Control Set mode. If the satellite receiver’s channel number has not been changed correctly ...
Filename [HDS1EU_2.fm] Masterpage:Left HDS1EU_2.fm Page 22 Thursday, June 21, 2001 5:35 PM 22 EN RECORDING/PLAYBACK ON HDD DECK Basic Recording A Turn on the recorder. ● Turn on the TV and select the AV mode. ● If the recorder is turned on with HDD deck selected, there may be about 30 seconds’ delay in starting to show pictures on the screen. Press 1. ● The button corresponding to the previously selected deck lights on the recorder. B Select the HDD deck. Press HDD.
Filename [HDS1EU_2.fm] Masterpage:Right-NoTitle0 HDS1EU_.book Page 23 Thursday, June 21, 2001 12:30 PM EN Basic Playback ● Turn on the TV and select the AV mode. ● If the recorder is turned on with HDD deck selected, there may be about 30 seconds’ delay in starting to show pictures on the screen. 23 A Turn on the recorder. Press 1. ● The button corresponding to the previously selected deck lights on the recorder. B Select the HDD deck. Press HDD. ● The HDD button lights on the recorder.
Filename [HDS1EU_2.fm] Masterpage:Left HDS1EU_2.fm Page 24 Thursday, June 21, 2001 3:22 PM 24 EN RECORDING/PLAYBACK ON HDD DECK (cont.) Playback with HDD Navigation The HDD Navigation enables you to seach and select the desired programmes recorded on the HDD deck very easily. There is a 40 Gbyte hard disk drive on this recorder. You can record up to 60 programmes for the HDD deck.
Filename [HDS1EU_2.fm] Masterpage:Right-NoTitle0 HDS1EU_2.fm Page 25 Thursday, June 21, 2001 7:58 PM 25 EN Scan for Beginning(s) of Programme(s) ● Turn on the TV and select the AV mode. ● If the recorder is turned on with HDD deck selected, there may be about 30 seconds’ delay in starting to show pictures on the screen. C Access the Index screen. A Press NAVIGATION. The HDD Navigation screen appears. B Confirm that “INDEX” screen appears. Then, press t or OK.
Filename [HDS1EU_2.fm] Masterpage:Left HDS1EU_.book Page 26 Thursday, June 21, 2001 12:30 PM 26 EN RECORDING/PLAYBACK ON HDD DECK (cont.) Live Memory Playback Equipped with a hard disk drive, this recorder allows information to be written to and read from the hard disk at high speeds. Taking advantage of this feature, you can temporarily record programmes received with the tuner or from an externally connected equipment, and can watch them only a few seconds behind actual air time.
Filename [HDS1EU_2.fm] Masterpage:Right-NoTitle0 HDS1EU_.book Page 27 Thursday, June 21, 2001 12:30 PM EN Playback Features ● Turn on the TV and select the AV mode. ● If the recorder is turned on with HDD deck selected, there may be about 30 seconds’ delay in starting to show pictures on the screen. 27 High-Speed Search During playback (or Live Memory Playback), press 5 for forward high-speed search, or 3 for reverse high-speed search. ● To resume normal playback, press 4.
Filename [HDS1EU_2.fm] Masterpage:Left HDS1EU_.book Page 28 Thursday, June 21, 2001 12:30 PM 28 EN RECORDING/PLAYBACK ON HDD DECK (cont.) Quick Rewind a little During playback (or Live Memory Playback), press (START –). The recorder rewinds the picture a little (about 7 seconds) and resumes playback. ● If the button is pressed repeatedly, the recorder rewinds the pictures continuously and resumes playback. Quick Skip Forward During playback (or Live Memory Playback), press (START +).
Filename [HDS1EU_2.fm] Masterpage:Right-NoTitle0 HDS1EU_2.fm Page 29 Thursday, June 21, 2001 7:07 PM EN Recording Features 29 Receiving Stereo and Bilingual Programmes Your recorder is equipped with a Sound-Multiplex decoder (A2) and a Digital stereo sound decoder (NICAM) making reception of stereo and bilingual broadcasts possible. When the channel is changed, the type of broadcast being received will be displayed on the TV screen for a few seconds.
Filename [HDS1EU_2.fm] Masterpage:Left HDS1EU_.book Page 30 Thursday, June 21, 2001 12:30 PM 30 EN Basic Recording ● Turn on the TV and select the AV mode. ● If the recorder is turned on with HDD deck selected, there may be about 30 seconds’ delay in starting to show pictures on the screen. RECORDING/PLAYBACK ON VHS DECK A Load a cassette. Insert a cassette with the record safety tab intact.
Filename [HDS1EU_2.fm] Masterpage:Right-NoTitle0 HDS1EU_.book Page 31 Thursday, June 21, 2001 12:30 PM EN Basic Playback ● Turn on the TV and select the AV mode. ● If the recorder is turned on with HDD deck selected, there may be about 30 seconds’ delay in starting to show pictures on the screen. 31 A Load a cassette. Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is pointed toward the recorder.
Filename [HDS1EU_2.fm] Masterpage:Left HDS1EU_2.fm Page 32 Thursday, June 21, 2001 3:37 PM 32 EN RECORDING/PLAYBACK ON VHS DECK (cont.) Playback with VCR Navigation The VCR Navigation enables you to seach and select the desired programmes recorded on the VHS deck very easily. When you record a programme with the VHS deck for more than 8 minutes in SP mode (for more than 15 minutes in LP mode or for more than 23 minutes in EP mode) with “NAVIGATION” set to “ON” (墌 pg.
Filename [HDS1EU_2.fm] Masterpage:Right-NoTitle0 HDS1EU_2.fm Page 33 Thursday, June 21, 2001 7:58 PM EN Scan for Beginning of Programme with VCR Navigation The VCR Navigation can take effect for the programme which has been recorded, and whose information has been registered with this recorder. Once the VHS (S-VHS) cassettes have been used for recording with this recorder, they have the register number given by this recorder. ● Turn on the TV and select the AV mode.
Filename [HDS1EU_2.fm] Masterpage:Left HDS1EU_.book Page 34 Thursday, June 21, 2001 12:30 PM 34 EN RECORDING/PLAYBACK ON VHS DECK (cont.) Playback Features Still Picture/Frame-By-Frame Playback 1 Pause during playback. Press 9. 2 Activate frame-by-frame playback. Press 9 repeatedly to advance one frame at a time. OR Press 9 for over 2 seconds to start frame-by-frame playback. ● To resume normal playback, press 4. Slow Motion 1 Pause during playback.
Filename [HDS1EU_2.fm] Masterpage:Right-NoTitle0 HDS1EU_.book Page 35 Thursday, June 21, 2001 12:30 PM EN 35 Index Search Your recorder automatically marks index codes at the beginning of each recording. This function gives you quick access to any one of 9 index codes in either direction. NOTE: Before starting, make sure the recorder is in the Stop mode. Activate Index Search. Press w or e (2 or 6). “2 1” or “6 1” is displayed on the TV screen and search begins in the corresponding direction.
Filename [HDS1EU_2.fm] Masterpage:Left HDS1EU_.book Page 36 Thursday, June 21, 2001 12:30 PM 36 EN RECORDING/PLAYBACK ON VHS DECK (cont.) Soundtrack Selection Your recorder is capable of recording three soundtracks (HI-FI L, HI-FI R and NORM) and will play back the one you select.
Filename [HDS1EU_2.fm] Masterpage:Right-NoTitle0 HDS1EU_.book Page 37 Thursday, June 21, 2001 12:30 PM EN Recording Features 37 Record One Programme While Watching Another Once recording is in progress, all you need to do is to set the channel controls on the TV for the station you wish to view. ● The programme selected with the TV’s channel controls appears on the TV screen, while the one selected with the recorder’s PR buttons is recorded on the tape.
Filename [HDS1EU_2.fm] Masterpage:Left HDS1EU_.book Page 38 Thursday, June 21, 2001 12:30 PM 38 EN RECORDING/PLAYBACK ON VHS DECK (cont.) Retake You can cut out unnecessary parts of a TV programme while you are recording it. End of programme Programme Unnecessary part Beginning of programme Unnecessary part Programme Recorded part Go back to end of programme to cut out unnecessary part 1 Engage the Record-Pause mode. Press 9 during recording. 2 Locate the start point.
Filename [HDS1EU_2.fm] Masterpage:Right-NoTitle0 HDS1EU_.book Page 39 Thursday, June 21, 2001 12:30 PM EN 39 Super VHS ET (S-VHS ET) — Recording on VHS cassettes with S-VHS quality You can record in SP mode on VHS cassettes with S-VHS picture quality. Tapes recorded using this function can be played back on a recorder equipped with the S-VHS ET function. ● You can activate the S-VHS ET function only before you start recording on a VHS cassette. ● Before recording, make sure that “B.E.S.T.
Filename [HDS1EU_2.fm] Masterpage:Left HDS1EU_.book Page 40 Thursday, June 21, 2001 12:30 PM 40 EN RECORDING/PLAYBACK ON VHS DECK (cont.) Receiving Stereo and Bilingual Programmes Your recorder is equipped with a Sound-Multiplex decoder (A2) and a Digital stereo sound decoder (NICAM) making reception of stereo and bilingual broadcasts possible. When the channel is changed, the type of broadcast being received will be displayed on the TV screen for a few seconds.
Filename [HDS1EU_2.fm] Masterpage:Right-NoTitle0 HDS1EU_.book Page 41 Thursday, June 21, 2001 12:30 PM EN B.E.S.T. Picture System The B.E.S.T. (Biconditional Equalised Signal Tracking) system checks the condition of the tape in use during playback and recording, and compensates to provide the highest-possible playback and recording pictures. You can set “B.E.S.T.” to “ON” or “OFF” to your preference (墌 pg. 77). Playback The recorder assesses the quality of the tape once you initiate playback.
Filename [HDS1EU_3.fm] Masterpage:Left HDS1EU_.book Page 42 Thursday, June 21, 2001 12:30 PM 42 EN TIMER RECORDING SHOWVIEW Timer Programming ® You can programme this recorder to timer-record as many as 16 programmes. With the SHOWVIEW system, timer programming is greatly simplified because each TV programme has a corresponding code number which your recorder is able to recognize. You can use the remote control with LCD panel to enter the SHOWVIEW number. A Turn on the recorder. Press 1.
Filename [HDS1EU_3.fm] Masterpage:Right-NoTitle0 HDS1EU_.book Page 43 Thursday, June 21, 2001 12:30 PM EN G NOTES: Set the recording speed. Press MODE (p). ● For the VHS deck: It is not possible to select EP mode if “COLOUR SYSTEM” is set to “MESECAM”. (墌 pg. 76) H Set the VPS/PDC mode. Press VPS/PDC to select “ON” or “OFF”. ● If “VPS/PDC ON” is displayed on the TV screen, VPS/PDC is set to ON. ● If “VPS/PDC OFF” is displayed on the TV screen, VPS/PDC is set to OFF.
Filename [HDS1EU_3.fm] Masterpage:Left HDS1EU_.book Page 44 Thursday, June 21, 2001 12:30 PM 44 EN Express Timer Programming You can programme this recorder to timer-record as many as 16 programmes. If you do not know the SHOWVIEW number for the programme you wish to record, use the following procedure to set your recorder to timer-record the programme. Before performing Express Timer Programming: ● Make sure that the recorder’s built-in clock is set properly. ● Turn on the TV and select the AV mode.
Filename [HDS1EU_3.fm] Masterpage:Right-NoTitle0 HDS1EU_3.fm Page 45 Thursday, June 21, 2001 3:23 PM EN I Set the VPS/PDC mode. Satellite Receiver Users Press VPS/PDC to select “ON” or “OFF”. ● If “VPS/PDC ON” is displayed on the TV screen, VPS/PDC is set to ON. ● If “VPS/PDC OFF” is displayed on the TV screen, VPS/PDC is set to OFF. 墌 “VPS/PDC Recording” in the right column J Set the category. A Press w e to move the arrow to “CATEGORY”, then press OK. The category set screen appears.
Filename [HDS1EU_3.fm] Masterpage:Left HDS1EU_3.fm Page 46 Thursday, June 21, 2001 3:23 PM 46 EN TIMER RECORDING (cont.) C Access the Programme screen. Press r t to select the programme, then press OK. PROGRAMME VPS/PDC RECORD TO REC MODE WEEKLY/DAILY HDD SEP WEEKLY ON START STOP DATE TV PROG 00:00 12/06/01 TUE 5 CH CANCEL CATEGORY UNDECIDED 23:30 CONFIRM + – + – START STOP + – + – DATE PR PROG. CHANGE SETTINGS BY REMOTE THEN CONFIRM EXIT To cancel or change a programme...
Filename [HDS1EU_3.fm] Masterpage:Right-NoTitle0 HDS1EU_.book Page 47 Thursday, June 21, 2001 12:30 PM EN Automatic Satellite Programme Recording NOTE: This function is available for the HDD deck only. This function allows you to automatically record a satellite programme which is timer-programmed on your external satellite receiver. Connect a satellite receiver to the recorder’s AV2 (L-2) IN/DECODER connector and programme the timer on the satellite receiver.
Filename [HDS1EU_3.fm] Masterpage:Left HDS1EU_.book Page 48 Thursday, June 21, 2001 12:30 PM 48 EN Remote A/B/C/D Code Switching The remote control is capable of controlling four JVC video recorders independently. Each of recorders can respond to one of four codes (A, B, C or D). The remote control is preset to send A code signals because your video recorder is initially set to respond to A code signals. You can easily modify your video recorder to respond to B, C or D code signals.
Filename [HDS1EU_3.fm] Masterpage:Right-NoTitle0 HDS1EU_.book Page 49 Thursday, June 21, 2001 12:30 PM EN TV Multi-Brand Remote Control Your remote control can operate the basic functions of your TV set. In addition to JVC TVs, other manufacturer’s TVs can also be controlled. Before performing the following steps: Turn off the TV using its remote control. LCD panel 49 A Set the TV brand code. Press TV/CABLE/SAT to switch the display to “TV” and keep pressing the button down until “TV-_ _” appears.
Filename [HDS1EU_3.fm] Masterpage:Left HDS1EU_.book Page 50 Thursday, June 21, 2001 12:30 PM 50 EN Satellite Receiver Multi-Brand Remote Control Your remote control can operate the basic functions of your satellite receiver set. In addition to JVC satellite receivers, other manufacturer’s satellite receivers can also be controlled. Before performing the following steps: Turn off the satellite receiver using its remote control. LCD panel REMOTE CONTROL FUNCTIONS (cont.
Filename [HDS1EU_3.fm] Masterpage:Right HDS1EU_.book Page 51 Thursday, June 21, 2001 12:30 PM EN EDITING About Hybrid Navigation In the sections “Playback with HDD Navigation” (墌 pg. 24) and “Playback with VCR Navigation” (墌 pg. 32), it is briefly described how to search for the beginning of each recorded programme using the Navigation functions. More detailed explanations are provided in this section using HDD Navigation by way of example.
Filename [HDS1EU_3.fm] Masterpage:Left HDS1EU_.book Page 52 Thursday, June 21, 2001 12:30 PM 52 EN Modify Information NOTE: The Navigation systems cannot work during recording on the HDD deck or in SAT# mode (墌 pg. 47). EDITING (cont.) C Access the Navigation screen. Press NAVIGATION. ● The Navigation screen corresponding to the selected deck appears. ● For the VHS deck: When “NAVIGATION” is set to “OFF” (墌 pg. 75), the Navigation screen does not appear. D Select the programme.
Filename [HDS1EU_3.fm] Masterpage:Right-NoTitle0 HDS1EU_3.fm Page 53 Thursday, June 21, 2001 7:47 PM 53 EN Modify Programme Title Perform steps A to D of “Modify Index” (墌 pg. 52) before continuing. A Access the modify screen. A Press w e to move the arrow to “MODIFY”, then press OK. B Press w e to move the arrow to “MODIFY TITLE”, then press OK. The “MODIFY TITLE” screen appears. B Enter new title. Press w r e t to move the arrow to the desired letter or command, then press OK.
Filename [HDS1EU_3.fm] Masterpage:Left HDS1EU_3.fm Page 54 Thursday, June 21, 2001 7:08 PM 54 EN EDITING (cont.) Modify Category Perform steps A to D of “Modify Index” (墌 pg. 52) before continuing. A Access the modify screen. A Press w e to move the arrow to “MODIFY”, then press OK. B Press w e to move the arrow to “MODIFY CATEGORY”, then press OK. The “MODIFY CATEGORY” screen appears. B Select new category. Press w r e t to move the arrow to the desired category, then press OK.
Filename [HDS1EU_3.fm] Masterpage:Right-NoTitle0 HDS1EU_.book Page 55 Thursday, June 21, 2001 12:30 PM EN 55 Delete Information For HDD Navigation: When you delete the registered information of a programme, the recorder delete the programme itself on the hard disk drive. The deleted programme is never resumed. For VCR Navigation: When you delete the registered information of a programme, the recorder delete only the information on the hard disk drive.
Filename [HDS1EU_3.fm] Masterpage:Left HDS1EU_3.fm Page 56 Friday, June 22, 2001 8:01 AM 56 EN Dubbing EDITING (cont.) Easy Dubbing from HDD deck to VHS deck Because this recorder includes both HDD deck and VHS deck, you can easily use it for dubbing without connecting any other equipment. A Access the HDD Navigation screen. Press HDD, then press NAVIGATION. The HDD Navigation screen appears. B Access the Easy Dubbing screen. Press w e to move the arrow to “EASY DUBBING”, then press OK.
Filename [HDS1EU_3.fm] Masterpage:Right-NoTitle0 HDS1EU_3.fm Page 57 Thursday, June 21, 2001 7:09 PM EN 57 E Select the VHS deck. Press S-VHS. F Load a cassette. Insert a cassette with the record safety tab intact. G Set the recording speed. Press MODE (p). ● For the VHS deck: It is not possible to select EP mode if “COLOUR SYSTEM” is set to “MESECAM”. (墌 pg. 76) H Locate the start point. A Search for the point where you want to start dubbing by pressing 4, 5 or 3 then press 8.
Filename [HDS1EU_3.fm] Masterpage:Left HDS1EU_.book Page 58 Thursday, June 21, 2001 12:30 PM 58 EN Normal Dubbing (from HDD to VHS) EDITING (cont.) You can dub selected scenes from the HDD deck to a cassette, starting and stopping wherever you wish. A Load a cassette. Insert a cassette with the record safety tab intact. B Prepare the HDD deck for dubbing. A Press HDD and select the programme to be dubbed. You can select the programme by HDD Navigation. (墌 pg.
Filename [HDS1EU_3.fm] Masterpage:Right-NoTitle0 HDS1EU_.book Page 59 Thursday, June 21, 2001 12:30 PM EN Normal Dubbing (from VHS to HDD) 59 You can dub selected scenes from a cassette to the HDD deck, starting and stopping wherever you wish. A Load a cassette. Insert a cassette with the record safety tab intact. B Prepare the VHS deck for dubbing. A Press S-VHS and select the programme to be dubbed. You can select the programme by VCR Navigation. (墌 pg.
Filename [HDS1EU_3.fm] Masterpage:Left HDS1EU_.book Page 60 Thursday, June 21, 2001 12:30 PM 60 EN Random Assemble Editing EDITING (cont.) 8-programme Editing Memory (1 programme x 8 scenes) By using the Random Assemble Editing function, you can select up to 8 scenes from a previously recorded programme on the HDD deck and automatically dub them onto a cassette on the VHS deck. Random Assemble Editing is possible only when dubbing from the HDD deck to the VHS deck. A Load a cassette.
Filename [HDS1EU_3.fm] Masterpage:Right HDS1EU_3.fm Page 61 Thursday, June 21, 2001 3:24 PM EN 61 I Select other edit-in and edit-out points. Repeat step H. You can select up to 8 pairs of edit-in and edit-out points. To modify the points A Move the arrow to “MODIFY”, then press OK. B Press w r e t to select the desired point, then press OK. The selected point starts couting. C Repeat step H. J Access the Start Editing screen. Press w r e t to move the arrow to “EDIT START”, then press OK.
Filename [HDS1EU_4.fm] Masterpage:Left HDS1EU_.book Page 62 Thursday, June 21, 2001 12:30 PM 62 EN EDITING (cont.) You can use a camcorder as the source player and your recorder as the recording deck. Edit From A Camcorder A A Make connections. AUDIO input Recorder A If the camcorder has no S-VIDEO output connector ... ... connect the camcorder’s AUDIO OUT and VIDEO OUT connectors to the recorder’s front panel AUDIO and VIDEO input connectors. B If the camcorder has an S-VIDEO output connector ... ..
Filename [HDS1EU_4.fm] Masterpage:Right-NoTitle0 HDS1EU_.book Page 63 Thursday, June 21, 2001 12:30 PM EN 63 B Select the recording deck. Press HDD or S-VHS. C Set the recorder’s input mode. Press AUX (number key “0”) and/or PR to select “F-1”. ● Set “F-1 INPUT” to “VIDEO” for the VIDEO input connector, or “S-VIDEO” for the S-VIDEO input connector, depending on the connector being used (墌 pg. 65). D Set the edit mode. (VHS deck only) See “PICTURE CONTROL” on page 77. E Start the camcorder.
Filename [HDS1EU_4.fm] Masterpage:Left HDS1EU_.book Page 64 Thursday, June 21, 2001 12:30 PM 64 EN Output/Input Set EDITING (cont.) the output or input mode for the AV1 C Select (L-1) IN/OUT connector. A Press rt to move the arrow to “L-1 OUTPUT” or “L-1 INPUT”, then press OK. B Press rt to select the appropriate setting, then press OK.
Filename [HDS1EU_4.fm] Masterpage:Right-NoTitle0 HDS1EU_.book Page 65 Thursday, June 21, 2001 12:30 PM EN 65 L-2 SELECT Setting F-1 INPUT Setting Set “L-2 SELECT” to the appropriate mode depending on the type of appliance connected to the recorder’s AV2 (L-2) IN/ DECODER connector. Set “F-1 INPUT” to the appropriate mode depending on the connector (VIDEO or S-VIDEO) being used on the front panel. Perform steps A and B of “L-1 OUTPUT and L-1 INPUT Setting” on page 64.
Filename [HDS1EU_4.fm] Masterpage:Left HDS1EU_.book Page 66 Thursday, June 21, 2001 12:30 PM 66 EN Edit To Or From Another Video Recorder EDITING (cont.) You can use your recorder as the source player or as the recording deck. A Make connections. Connect the player’s 21-pin SCART connector to the recorder’s 21-pin SCART connector as illustrated on page 67. A When using your recorder as the source player ... ... connect its AV1 (L-1) IN/OUT connector to the recording deck.
Filename [HDS1EU_4.fm] Masterpage:Right-NoTitle0 HDS1EU_.
Filename [HDS1EU_4.fm] HDS1EU_.book Page 68 Thursday, June 21, 2001 12:30 PM 68 EN Masterpage:Left EDITING (cont.) Audio Dubbing Audio Dubbing replaces the normal audio sound of a previously recorded tape with a new soundtrack. ATTENTION: ● Audio dubbing is not possible on the HDD deck. ● Audio dubbing is not possible with a cassette recorded in EP mode. Normal audio track Pre-recorded tape Video/Hi-Fi audio track Audio-dubbed tape Your recorder CD player, etc. CD player, etc.
Filename [HDS1EU_4.fm] Masterpage:Right-NoTitle0 HDS1EU_.book Page 69 Thursday, June 21, 2001 12:30 PM EN A Make connections. Connect an audio component to the AUDIO L + R input connectors on the recorder’s front panel. ● When connecting a monaural audio component, use only the recorder’s AUDIO L input connector. B Select the VHS deck. Press S-VHS. C Set the recorder’s input mode. Press AUX (number key “0”) and/or PR to select “F-1”. D Locate the start point.
Filename [HDS1EU_4.fm] Masterpage:Left HDS1EU_.book Page 70 Thursday, June 21, 2001 12:30 PM 70 EN SYSTEM CONNECTIONS Connecting To A Satellite Receiver Simple Connections NOTES: ● Set “L-2 SELECT” to “A/V” (墌 pg. 65). ● You can use Automatic Satellite Programme Recording function (墌 pg. 47) with this connection. ● To record a programme via the satellite receiver, select L-2 mode by pressing AUX (number key “0”) and/or PR so that “L-2” appears on the front display panel.
Filename [HDS1EU_4.fm] Masterpage:Right-NoTitle0 HDS1EU_.book Page 71 Thursday, June 21, 2001 12:30 PM EN Perfect Connections NOTES: This is an example of recommended connection if your TV has two 21-pin AV input (SCART) connectors. Connect the decoder to the satellite receiver’s connector if you have a decoder, AV1 (L-1) IN/OUT connector to TV’s connector, and AV2 (L-2) IN/DECODER connector to the satellite receiver’s connector. Then connect the satellite receiver and TV.
Filename [HDS1EU_4.fm] Masterpage:Left HDS1EU_.book Page 72 Thursday, June 21, 2001 12:30 PM 72 EN SYSTEM CONNECTIONS (cont.) Connecting/Using A Decoder The AV2 (L-2) IN/DECODER connector can be used as an input connector for an external decoder (descrambler). Simply connect a decoder and you can enjoy the variety of programming that is available through scrambled channels. A Select the input mode. Set “L-2 SELECT” to “DECODER”. (墌 pg. 65) TV receiver TV aerial cable B Connect the decoder.
Filename [HDS1EU_4.fm] Masterpage:Right-NoTitle0 HDS1EU_.book Page 73 Thursday, June 21, 2001 12:30 PM EN 73 Connecting/Using A Stereo System These instructions enable you to connect your video recorder to your Hi-Fi stereo system (if you have one) and listen to the soundtrack through the stereo.
Filename [HDS1EU_5.fm] Masterpage:Left HDS1EU_.book Page 74 Thursday, June 21, 2001 12:30 PM 74 EN Mode Set Turn on the TV and select the AV mode. SUBSIDIARY SETTINGS You can change various mode settings on the TV screen by following the procedure described below. The table below shows the structure of the menu system. HDD/VCR SET UP HDD SET UP (墌 pg. 75) VCR SET UP 1 (墌 pg. 75) VCR SET UP 2 (墌 pg. 77) FUNCTION SET UP FUNCTION (墌 pg. 78) INPUT/OUTPUT (墌 pg. 64) INITIAL SET UP TUNER SET (墌 pg.
Filename [HDS1EU_5.fm] Masterpage:Right-Full-NoTitle0 HDS1EU_5.fm Page 75 Thursday, June 21, 2001 7:16 PM EN HDD SET UP 8 LIVE MEMORY OFF 30MIN 1HR 3HR 8 AUDIO REC NICAM MONO 75 * The default setting is bold in the table below. When this function is set to “30MIN”, “1HR” or “3HR”, you can enjoy the selected length of the time for “Live Memory Playback” (墌 pg. 26). When this function is set to “NICAM”, the NICAM audio programme will be recorded.
Filename [HDS1EU_5.fm] Masterpage:Left-FullCol HDS1EU_.book Page 76 Thursday, June 21, 2001 12:30 PM 76 EN SUBSIDIARY SETTINGS (cont.) VCR SET UP 1 (cont.) 8 AUTO SP]LP TIMER ON OFF * The default setting is bold in the table below. When this function is set to “ON”, the recorder automatically switches to LP mode to allow complete recording if there is not enough tape to record the entire programme while timer-recording in SP mode. For Example . . .
Filename [HDS1EU_5.fm] HDS1EU_.book Page 77 Thursday, June 21, 2001 12:30 PM Masterpage:Right-Full-NoTitle0 EN VCR SET UP 2 8 B.E.S.T. ON OFF 8 PICTURE CONTROL AUTO EDIT SOFT SHARP 77 * The default setting is bold in the table below. You can set the B.E.S.T. (Biconditional Equalised Signal Tracking) system to “ON” or “OFF” (墌 pg. 41). This feature helps you to adjust the playback picture quality according to your preference. Normally select “AUTO”.
Filename [HDS1EU_5.fm] HDS1EU_5.fm Page 78 Thursday, June 21, 2001 5:32 PM 78 EN SUBSIDIARY SETTINGS (cont.) VCR SET UP 2 (cont.) 8 VIDEO STABILIZER ON OFF Masterpage:Left-FullCol * The default setting is bold in the table below. When this function is set to “ON”, you can automatically correct vertical vibration in the picture when playing back unstable recordings made on another recorder. NOTES: ● When you finish viewing a tape, be sure to set this function to “OFF”.
Filename [HDS1EU_5.fm] Masterpage:Right-NoTitle0 HDS1EU_.book Page 79 Thursday, June 21, 2001 12:30 PM EN 79 SHOWVIEW System Setup ® IMPORTANT Normally, Auto Set Up (墌 pg. 14), Preset Download (墌 pg. 16) or Auto Channel Set (墌 pg. 80) sets the Guide Program numbers automatically. You need to set the Guide Program numbers manually only in the following cases.
Filename [HDS1EU_5.fm] Masterpage:Left HDS1EU_.book Page 80 Thursday, June 21, 2001 12:30 PM 80 EN Tuner Set Turn on the TV and select the AV mode. SUBSIDIARY SETTINGS (cont.) IMPORTANT Perform the following steps only if — — Auto Channel Set has not been set correctly by Auto Set Up or by Preset Download (墌 pg. 14, 16). — you have moved to a different area or if a new station starts broadcasting in your area.
Filename [HDS1EU_5.fm] Masterpage:Right-NoTitle0 HDS1EU_.book Page 81 Thursday, June 21, 2001 12:30 PM EN G Perform Auto Channel Set. IMPORTANT Press OK twice. ● You can set up the recorder’s tuner also by Preset Download. (墌 pg. 16) ● The Auto Set screen appears, and remains on screen while the recorder searches for receivable stations. As Auto Channel Set progresses, the “q” mark on the TV screen moves from left to right. Wait Beginning until the TV screen as shown in step H appears.
Filename [HDS1EU_5.fm] Masterpage:Left HDS1EU_.book Page 82 Thursday, June 21, 2001 12:30 PM 82 EN SUBSIDIARY SETTINGS (cont.) Manual Channel Set Store channels that were not stored during Auto Set Up (墌 pg. 14), Preset Download (墌 pg. 16) or Auto Channel Set (墌 pg. 80). A Access the Main Menu screen. Press MENU. B Access the Tuner Set screen. A Press w e to move the arrow to “INITIAL SET UP”, then press t or OK. B Press w e to move the arrow to “TUNER SET”, then press OK.
Filename [HDS1EU_5.fm] Masterpage:Right-NoTitle0 HDS1EU_5.fm Page 83 Thursday, June 21, 2001 7:16 PM EN 83 F Input the channel. Delete A Channel ● Input “0” before any single number entries. ● To input the registered station name (ID – 墌 pg. 87), press e until “– – – –” (ID setting) begins blinking, then press rt. ● For fine tuning adjustment, press e until “+/–” begins blinking, then press rt. While tuning, “+” or “–” appears.
Filename [HDS1EU_5.fm] Masterpage:Left HDS1EU_.book Page 84 Thursday, June 21, 2001 12:30 PM 84 EN SUBSIDIARY SETTINGS (cont.) Change Station Channel Position Perform steps A and C of “Manual Channel Set” on page 82 to access the Confirmation screen before continuing. A Select the item. Press rt w e until the item you want to move begins blinking. Then press OK and the station name (ID) and its channel (CH) number begin blinking. B Select the new position.
Filename [HDS1EU_5.fm] Masterpage:Right-NoTitle0 HDS1EU_.book Page 85 Thursday, June 21, 2001 12:30 PM EN 85 Set Stations (A) Set Stations (B) Set station names that are registered in your recorder. Set station names other than the ones registered in your recorder. Perform steps A and C of “Manual Channel Set” on page 82 to access the Confirmation screen before continuing. A Select the item. Press rt w e until the item you want begins blinking. B Access the Manual Channel Set screen.
Filename [HDS1EU_5.fm] Masterpage:Left HDS1EU_.book Page 86 Thursday, June 21, 2001 12:30 PM 86 EN SUBSIDIARY SETTINGS (cont.) When Receiving A Scrambled Broadcast A Select the decoder mode. Set “L-2 SELECT” to “DECODER” (墌 pg. 65). B Access the Confirmation screen. Perform steps A and C of “Manual Channel Set” on page 82. C Select the position. Press rt w e to select the channel position broadcasting scrambled programmes, then press OK twice.
Filename [HDS1EU_5.fm] Masterpage:Right-NoTitle0 HDS1EU_.
Filename [HDS1EU_5.fm] Masterpage:Left HDS1EU_.book Page 88 Thursday, June 21, 2001 12:30 PM 88 EN Clock Set Turn on the TV and select the AV mode. SUBSIDIARY SETTINGS (cont.) IMPORTANT If you performed Auto Set Up (墌 pg. 14), Preset Download (墌 pg. 16) or Auto Channel Set (墌 pg. 80), without ever having set the clock previously, the recorder’s built-in clock is also set automatically.
Filename [HDS1EU_5.fm] Masterpage:Right-NoTitle0 HDS1EU_.book Page 89 Thursday, June 21, 2001 12:30 PM EN E Set the date and time. Press rt to set the time, then press OK or e. The “DATE” display begins blinking. Repeat the same procedure to set the date and year. ● When you set the time, press and hold rt to change the time by 30 minutes. ● When you set the date, press and hold rt to change the date by 15 days. F Set Just Clock. The default setting is “OFF”.
Filename [HDS1EU_5.fm] Masterpage:Left HDS1EU_.book Page 90 Thursday, June 21, 2001 12:30 PM 90 EN TROUBLESHOOTING Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are often easily corrected, and this can save you the trouble of sending your video recorder off for repair. POWER SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION 1. No power is supplied to the recorder. ● The mains power cord is disconnected. Connect the mains power cord.
Filename [HDS1EU_5.fm] Masterpage:Right-NoTitle0 HDS1EU_.book Page 91 Thursday, June 21, 2001 12:30 PM EN 91 RECORDING SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION 1. Recording cannot be started. ● There is no cassette loaded, or the cassette loaded has had its record safety tab removed. Insert a cassette, or using adhesive tape, cover the hole where the tab was removed. 2. TV broadcasts cannot be recorded. ● “L-1”, “L-2”, “F-1”, “DUB“ or “SAT” has been selected as the input mode.
Filename [HDS1EU_5.fm] Masterpage:Left HDS1EU_.book Page 92 Thursday, June 21, 2001 12:30 PM 92 EN TROUBLESHOOTING (cont.) TIMER RECORDING SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION ● The clock and/or the timer have been set incorrectly. Re-perform the clock and/or timer settings. ● The timer is not engaged. Press # and confirm that “#” is displayed on the front display panel. 2. Timer programming is not possible. ● Timer recording is in progress.
Filename [HDS1EU_5.fm] Masterpage:Right-Full-NoTitle0 HDS1EU_.book Page 93 Thursday, June 21, 2001 12:30 PM EN 93 OTHER PROBLEMS SYMPTOM POSSIBLE CAUSE 1. Whistling or howling is heard from the TV during camcorder recording. ● The camcorder’s microphone is too close to the TV. Position the camcorder so its microphone is away from the TV. ● The TV’s volume is too high. Turn the TV’s volume down. 2. When scanning channels, some of them are skipped over.
Filename [HDS1EU_5.fm] Masterpage:Left HDS1EU_.book Page 94 Thursday, June 21, 2001 12:30 PM 94 EN TROUBLESHOOTING (cont.) ON-SCREEN MESSAGES MESSAGE DESCRIPTION CAN NOT MODIFY LIVE MEMORY TIME, MORE CAPACITY NEEDED DELETE UNWANTED PROGRAMME THEN RETRY There is not enough memory on the hard disk drive for Live Memory Playback. To increase the free space, dub some programmes to cassettes or delete the unwanted programmmes. (墌 pg.
Filename [HDS1EU_5.fm] Masterpage:Right HDS1EU_5.fm Page 95 Thursday, June 21, 2001 3:25 PM EN MESSAGE 95 DESCRIPTION UNABLE TO SET TIMER PROGRAMME DUE TO SHORTAGE OF CAPACITY DELETE UNWANTED PROGRAMME FROM HDD There is not enough memory on the hard disk drive for recording. To increase the free space, dub some programmes to cassettes or delete the unwanted programmmes. (墌 pg. 55) PROGRAMME FULL DELETE UNWANTED TIMER PROGRAMME You can programme this recorder to timer-record as many as 16 programmes.
Filename [HDS1EU_5.fm] Masterpage:Left HDS1EU_.book Page 96 Thursday, June 21, 2001 12:30 PM 96 EN TROUBLESHOOTING (cont.) ON-SCREEN MESSAGES (cont.) MESSAGE DESCRIPTION REMAINING CAPACITY IS SMALL DELETE UNWANTED PROGRAMME FROM HDD The remaining capacity of the hard disk drive is in short for the current recording. (墌 pg. 55) CAPACITY IS FULL, RECORDING STOPPED The recording stopped due to the shortage of the free space on the hard disk drive.
Filename [HDS1EU_5.fm] Masterpage:Right HDS1EU_.book Page 97 Thursday, June 21, 2001 12:30 PM EN QUESTIONS AND ANSWERS 97 PLAYBACK TIMER RECORDING Q. What happens if the end of the tape is reached during playback or search? A. The tape is automatically rewound to the beginning. Q. “o” and “#” remain lit on the front display panel. Is there a problem? A. No. This is a normal condition for a timer recording in progress. Q. Can the video recorder indefinitely remain in the still mode? A. No.
Filename [HDS1EU_5.fm] Masterpage:Left HDS1EU_.book Page 98 Thursday, June 21, 2001 12:30 PM 98 EN SPECIFICATIONS GENERAL TUNER/TIMER Power requirement : AC 220 V – 240 Vd, 50 Hz/60 Hz Power consumption Power on : 41 W Power off : 16 W Temperature Operating : 5°C to 40°C Storage : –20°C to 60°C Operating position : Horizontal only Dimensions (WxHxD) : 435 mm x 124 mm x 385 mm Weight : 7.
Filename [HDS1EU_IX.fm] Masterpage:Right HDS1EU_IX.fm Page 99 Thursday, June 21, 2001 7:15 PM EN LISTE OF TERMS 99 A O Audio Dubbing ...................................................... 68 Auto Channel Set .................................................... 80 Auto Set Up .......................................................... 14 AUTO SP]LP TIMER .............................................. 76 AUTO TIMER ........................................................
Filename [HDS1EU_Cov4.fm] HDS1EU_.book Page 100 Thursday, June 21, 2001 12:30 PM EN Auto Set Up — referring to the front display panel The Auto Set Up function sets the tuner channels, clock and Guide Program numbers automatically. BEFORE YOU START PLEASE MAKE SURE THAT: 8 The TV aerial cable is connected to the ANTENNA IN connector on the rear panel of the video recorder. 8 The video recorder’s mains power cord is connected to a mains outlet. 8 The video recorder is turned off.