. 4K MEMORY CARD CAMERA RECORDER GY-HM250U/GY-HM250E GY-HM180U/GY-HM180E GY-HM170U/GY-HM170E INSTRUCTIONS (BASIC) GY-HM250U(G)/GY-HM250E(G) GY-HM180U(G)/GY-HM180E(G) GY-HM170U(G)/GY-HM170E(G) This manual provides a brief explanation on operating this camera recorder. For detailed operation methods and camera settings, please refer to the following Mobile User Guide. The illustration here shows how the handle unit is attached using the unit supplied.
FOR USA These are general IMPORTANT SAFEGUARDS and certain items may not apply to all appliances. IMPORTANT SAFEGUARDS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Safety Precautions This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FOR USA AND CANADA Introduction CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Changes or modifications not approved by JVC could void the user’s authority to operate the equipment.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. POUR CANADA ATTENTION AVERTISSEMENT : POUR EVITER LES RISQUES D’INCENDIE OU D’ELECTROCUTION, NE PAS EXPOSER L’APPAREIL A LA PLUIE NI A L’HUMIDITE. ATTENTION: POUR EVITER TOUT RISQUE D’ELECTROCUTION NE PAS OUVRIR LE BOITER. AUCUNE PIECE INTERIEURE N’EST A REGLER PAR L’UTILISATEUR. SE REFERER A UN AGENT QUALIFIE EN CAS DE PROBLEME.
Introduction When the equipment is installed in a cabinet or on a shelf, make sure that it has sufficient space on all sides to allow for ventilation (10 cm (3-15/16") or more on both sides, on top and at the rear). Do not block the ventilation holes. (If the ventilation holes are blocked by a newspaper, or cloth etc. the heat may not be able to get out.) No naked flame sources, such as lighted candles, should be placed on the apparatus.
IMPORTANT (for owners in the U.K.) Connection to the mains supply in the United Kingdom. DO NOT cut off the mains plug from this equipment. This equipment is in conformity with the provisions and protection requirements of the corresponding European Directives. This equipment is designed for professional video appliances and can be used in the following environments: Controlled EMC environment (for example, purpose-built broadcasting or recording studio), and rural outdoors environments.
Introduction Dear Customer Battery Pack This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety. European representative of JVCKENWOOD Corporation is: JVCKENWOOD Deutschland GmbH Konrad-Adenauer-Allee 1-11 61118 Bad Vilbel GERMANY The supplied battery pack is a lithium-ion battery.
o Para Brasil Importer (UK only) Informação sobre eliminação de baterias Este produto não deverá ser eliminado como lixo doméstico em geral. Devolva a bateria velha ao comerciante ou para a rede autorizada, para que seja devolvida ao fabricante ou importador. A reciclagem e eliminação de lixo em uma maneira adequada, ajudarão para preservar recursos, prevenindo, ao mesmo tempo, contra efeitos prejudiciais sobre a nossa saúde e o meio ambiente.
Contents Introduction Introduction Safety Precautions ............................................ 4 Contents .......................................................... 10 Verifying the Accessories ................................ 10 Names of Parts ................................................ 11 Preparations Attaching the Handle Unit ................................ 14 Adjusting the Grip Belt ..................................... 14 Charging the Battery ........................................
Names of Parts B C D E H F G . A Built-in Microphone B Handle Unit Memo : 0 The handle unit is detached from the camera recorder unit in the factory shipment. For details on attaching the handle unit, please refer to [Attaching the Handle Unit] . C [MODE] Camera/Media Mode Selection Button D [POWER ON/OFF] Lock Power ON/OFF Switch Turns ON/OFF the power. 0 Hold down the lock button (blue) in the center to toggle ON/OFF. 0 When the power is turning OFF, “P.
Side Control Panel A [HOST] USB Host Terminal n B [DEVICE] USB Mini Terminal C [HDMI] HDMI Output Terminal D [SDI OUT] SDI Output Terminal n m E D Introduction C F B A G M . Rear Terminal GY-HM250U/GY-HM250E L K J I H A [FULL AUTO] Full Auto Selection Button Press and hold the button to switch the Full Auto mode ON and OFF. Full Auto mode adjusts the Iris, Gain, Shutter and White Balance automatically. Memo : 0 This camera recorder is set to Full Auto mode in the factory default.
LCD Monitor D C H I J B A M L K . A LCD Monitor B [CANCEL/STOP] Cancel/Stop Button C LCD Cross-Shaped Button (JKHI)/Set Button (R) D [MENU/THUMB] Menu/Thumbnail Button E [LOLUX/3] Low-light Shooting/User 3 Button F [C.
Attaching the Handle Unit Adjusting the Grip Belt The handle unit is detached from the camera recorder unit in the factory shipment. To use the handle unit, attach it by following the steps below. * Attach or detach the handle unit when the power is turned off. Open the pad and adjust the position of the grip belt accordingly. Preparations . Caution : 0 If the grip is loose, the camera recorder may fall off resulting in injuries or malfunction. .
Charging the Battery Removing the Battery GY-HM250U/GY-HM250E Charging the Battery 2 Charge the battery immediately after purchase or when the battery power is running low. * The battery is not charged when purchased. Preparations GY-HM180U/GY-HM180E GY-HM170U/GY-HM170E 2 2 3 4 1 . 1 Hold down the lock button (blue) at the center of the [POWER ON/OFF] switch to set to “OFF”. 2 Attach the supplied battery. Slide it in until you hear a click. 3 Connect the supplied AC adapter to the [DC] terminal.
Estimated Charging and Continuous Operating Times Preparations o Charging time SSL-JVC50 (accessory) n : Approx. 4 hrs BN-VC826 (accessory) m : Approx. 3 hrs 40 mins M * When the [POWER ON/OFF] switch is set to “OFF” Memo : 0 If you charge the battery immediately after using while the battery is still warm, it may not be fully charged. o mM 0 It is recommended that you charge the battery in an environment between 10 °C and 30 °C (50 °F and 86 °F).
Configuring the Initial Settings 2 Select a language using the cross-shaped button (JK), and press the Set button (R). The Initial Setting screen appears. Preparations When the power is first turned on, the Initial Setting screen for performing the initial settings in the camera recorder appears. Set the date/time of the built-in clock in the [Initial Setting] screen. All operations are disabled until initial settings are complete.
4 Press the Set button (R) after confirming the exit screen. The [Initial Setting] screen appears. 0 For U models Usable Cards Format Setting and Usable SD Card Combinations System Initial Setting UTC-05:00 Preparations Set HighSpeed 4K HD . 0 For E models Initial Setting UTC Set . Memo : 0 The [Initial Setting] screen appears when the power is turned on for the first time and when the power is turned on after the built-in battery is fully discharged.
Estimated Recordable Time of SD Cards o When [Main Menu] B [System] B [Record Set] B [Record Format] B [Format] is set to “Exchange” (U model only) The estimated recordable time is only a guide. Differences may occur depending on the SD card in use and the battery condition.
Inserting an SD Card This camera recorder comes with two card slots (Slot A and B) for video/audio recording and playback. 1 Select [System] B [Media] B [Format Media]. 2 Select the slot of the SD card to be formatted and press the Set button (R). Format Media Format Slot A Format Slot B 1 2 Preparations 3 SD Card Cover Set 2 SD Card . 3 The status of the selected SD card appears. 4 Select [Format] and press the Set button (R). .
Clip (Recorded Data) and Clip Name 0 When recording is stopped, the images, audio and accompanying data which are recorded from start to stop are recorded as one “clip” on the SD card. 0 An 8-character clip name is automatically generated for the recorded clip. (“Clip Name Prefix” + “Clip Number”) 0 When [System] B [Record Set] B [Record Format] B [WFormat] is set to “AVCHD”, the clip name generated consists of only the Clip Number (5-digit number).
Basic Shooting Procedures Shooting Preparations 4 3 . Shooting 4 2 1 . 1 Supply battery or AC adapter power to the camera recorder. 2 Insert an SD card. 3 Turn on the power of the camera recorder. Hold down the lock button (blue) at the center of the [POWER ON/OFF] switch to set to “ON”. The camera recorder starts up in Camera mode and is ready for recording. 4 Adjust the angle of the LCD monitor and viewfinder.
Miscellaneous Functions for Shooting and Recording Methods This camera recorder is equipped with various functions for shooting. The functions described here are the typical functions of the camera recorder. Miscellaneous Functions for Shooting 0 Assignment of user buttons: 0 0 0 0 Miscellaneous Functions for Shooting and Recording Methods 23 Shooting 0 You can assign functions to the buttons and use them as user buttons. Functions can be assigned to the buttons according to the usability.
Playing Recorded Clips Use the operation buttons on the side control panel of the camera recorder to play back. A B C . Playback A Set Button (R) 0 Plays back/pauses the clip pointed by the cursor. 0 You can press the cross-shaped button (HI) to perform frame-by-frame forward playback during pause mode. B Cross-shaped Button (JKH I) 0 [J/K] Button: Skips in the reverse or forward direction. 0 [H/I] Button: 0 During Playback: Fast forwards in the reverse or forward direction.
Connecting External Monitor 0 To output live or playback video images and Connecting via SDI n m 0 Digital video signals, together with embedded (superimposed) audio signals and time code signals, are output for both the 3G-SDI/HD-SDI and SD-SDI signals. Memo : 0 The sampling frequency for embedded (superimposed) audio signals is 48 kHz. Time code of the built-in time generator as well as playback time code are also output.
Functions of Network Connection n 0 The network function can be operated by connecting one of the following adapters to the [HOST] terminal at the side terminal section. 0 Wireless LAN adapter 0 Ethernet adapter 0 Cellular adapter 0 The network feature comprises web-browserbased functions using devices such as a smartphone, tablet terminal, or PC, as well as FTP and live streaming functions that run via thumbnail screens and menu operation.
Menu Screen Hierarchical Chart TC/UB... TC Generator TC Preset UB Mode Drop Frame Main Menu... Overlay Settings... n Layout Import User Layout Delete User Layout Type Output... Watermark Full Screen Graphic... Password Lock LCD/VF... Shooting Assist... Marker Settings... Display Settings... VF SW VF Color VF Bright VF Contrast LCD Bright LCD Contrast LCD Backlight LCD Mirror LCD/VF Peaking Camera Function...
Basic Operations in Menu Screen 0 Press the [MENU/THUMB] button on the LCD 0 0 0 0 0 monitor to display the menu screen on the LCD monitor and viewfinder. Various settings for shooting and playback can be configured on the menu screen. There are two types of menu screens - [Main Menu] and [Favorites Menu]. [Main Menu] contains all the setting items of the camera recorder, classified according to functions and uses, while [Favorites Menu] allows users to customize the menu items freely.
Display Screen Display Screen in Camera Mode Display 0 screen This screen displays the event. It is also used to display warnings only. e ※1 da Z Y c V ※2 282min 100min 50min A 5 . 6f t ND 1 /16 AE E+6 18dB F1.6 P 15000K 15000K 1/ 100 0 ※2 H I . *1 *2 Appears only during warnings Appears only during operation Display 1 screen da Z Y c X W e 00: 00: 00.00 A Jan 24 , 2015 12 :34 :56 F 5 . 6f t ND 1 /16 0 AE+6 18dB F1.6 1/ 100 P 15000K 4030 20 10 0 G H IJ .
F Audio Level Meter 0 Displays the audio levels of CH1 and CH2. 0 The V icon appears on the screen when in Manual mode. Memo : 0 This item is not displayed when [LCD/VF] B [Display Settings] B [Media Remain] is set to “Off”. However, warnings will be displayed. 0 Displayed on the Display 0 and Display 1 screens only in the case of warnings. (When the remaining time is shorter than 3 minutes) The icons appear on all display screens in the following cases.
J AE Lock The U icon is displayed during AE lock. K White Balance Mode Displays the current white balance mode. (*****K indicates color temperature) A< *****K> : When the [WHT BAL B/A/PRST] switch is set to “A” in the Manual White Balance mode. B< *****K> : When the [WHT BAL B/A/PRST] switch is set to “B” in the Manual White Balance mode. P< *****K> : When the [WHT BAL B/A/PRST] switch is set to “PRST” in the Manual White Balance mode.
S Focus Assist 0 “FOCUS” is displayed when auto focus is activated. 0 When ACCU-Focus is enabled, “ACCUFOCUS” blinks for about 10 seconds while Focus Assist starts up, after which the “FOCUS” indicator lights up. 0 If recording starts while [ACCU-Focus] is active, [ACCU-Focus] will be forcibly deactivated. Memo : 0 Displayed in the Display 0 screen only when there is a change. T Date/Time Display Displays the current date and time.
Y Live streaming mark n When [System] B [Network]/[Settings] B [Live Streaming Set] B [Live Streaming] is set to “On”, the distribution status is displayed. Icon . . .
Display Screen in Media Mode Media Display 0 Screen This screen displays the media status or event. It is also used to display warnings only. Q A ※ PO N M 1000/2000 282min K C Resolution Displays the video image resolution. D Frame Rate/Bit Rate Displays the frame rate and bit rate in pairs. E Operation Guide Displays a guide for the current operation buttons. F Audio Level Meter Displays the audio levels of CH1 and CH2. 0 I G .
I Information Display The camera information display turns on and off each time you press the [OIS/6] button. 0 Camera information display displays only information of Gain, Iris, Shutter and White Balance that have been recorded. K Network Connection Icon n The network connection status is displayed when [System] B [Network] is set to “On”. This icon is not displayed when “Off” is selected. (A P 0 [ Network n ] ) Icon . (Blink) P 0dB F1.6 1/ 100 13000K .
M Event/Warning Display Area Displays error messages. N Media Status Status Screen 0 This screen allows you to check the current settings. : Playing : Still picture playback mode : High-speed playback in the forward direction (* playback speed: 5x, 15x, 60x, or 360x) REV * : High-speed playback in the reverse direction (* reverse playback speed: 5x, 15x, 60x, or 360x) STOP : Stop mode P.OFF : Power OFF O Check Mark Displayed when the currently played clip is selected.
Troubleshooting Symptom Power does not turn on. Unable to start recording. Action 0 Is the AC adapter properly connected? 0 Is the battery charged? 0 Is the power turned on immediately after it is turned off? 0 0 0 Camera image is not output on the LCD monitor and viewfinder screen. Playback does not start after selecting a clip thumbnail and pressing the Set button (R). Images on the LCD monitor and viewfinder screen appear dark or blurred.
Symptom Incorrect display on the viewfinder. The actual recording time is shorter than the estimated time. Cannot connect to wireless LAN. n Action 0 Is [LCD/VF] B [VF SW] set to “Enable”, and is the viewfinder in use without being pulled out? To use the viewfinder in this setting, pull out the viewfinder. 0 The recordable time may be shorter depending on the shooting conditions or the subject. 0 Check the mode of connection and method of setting ([SSID] and [Passphrase] in cases other than WPS).
Precautions for Proper Use Storage and Usage Locations Maintenance o Turn off the power before performing any maintenance. o Wipe the external cabinet of the unit with a soft cloth. Do not wipe the body with benzene or thinner. Doing so may cause the surface to melt or turn cloudy. When it is extremely dirty, soak the cloth in a solution of neutral detergent, wipe the body with it, and then use a clean cloth to remove the detergent. Rechargeable Battery o Be sure to use only the specified batteries.
Regular Inspection (Maintenance) o Under normal environment, dust will accumulate on the camera recorder when it is used over a long period. Dust may enter the camera recorder especially if it is used outdoors. This may affect the image and sound quality of the camera recorder. Check and replace the fan after every 9000 hours (suggested guideline). You can check the usage time of the fan in [System] B [System Information] B [Fan Hour].
LCD Monitor and Viewfinder o The LCD monitor and viewfinder screen are manufactured using high-precision technology. Black spots may appear on the LCD monitor and viewfinder screen, or red, blue, and/or white spots may not disappear. However, this is not a malfunction and these spots are not recorded on the SD card. o If you use this unit continuously for a long period of time, the characters displayed in the viewfinder may temporarily remain on the screen. This is not recorded on the SD card.
Others Others o Do not insert objects other than the memory card into the card slot. o Do not block the vent on the unit. Blocking of the vent causes internal heating and may lead to burns and fires. o Do not turn off the [POWER ON/OFF] switch or remove the power cable during recording or playback. o The camera recorder may not show stable pictures for a few seconds immediately after the power is turned on, but this is not a malfunction.
Specifications Item [x] terminal Output General Item Power Power consumption Mass Description DC 12 V n 0 Approx. 9.2 W (*1) 0 Approx. 8.3 W (*2) mM 0 Approx. 8.9 W (*1) 0 Approx. 7.6 W (*2) n 0 Approx. 1.6 kg (with battery) mM 0 Approx. 1.
Others Item Description HD mode (QuickTime) Recording file QuickTime File Format format Video MPEG-4 AVC/H.264 50 Mbps YUV422 mode, XHQ (Max) 1920x1080/59.94p, 59.94i, 29.97p, 23.98p, 50p, 50i, 25p mode UHQ Mode MPEG-4 AVC/H.264 35 Mbps (Max) 1920x1080/59.94i, 29.97p, 23.98p, 50i, 25p 1280x720/59.94p, 50p Audio LPCM 2ch, 48 kHz/16 Bit HD mode (High-Speed) Recording file QuickTime File Format format Video XHQ mode MPEG-4 AVC/H.264 50 Mbps 119.88/59.94p, 100/50p, 119.88/29.97p, 59.94/29.
Software License Agreement The software embedded in the Product (hereinafter the “Licensed Software”) provided by JVCKENWOOD Corporation (hereinafter the “Licensor”) is copyrighted to or sublicensable by the Licensor, and this Agreement provides for the terms and conditions which Users shall follow in order to use the Licensed Software. The User shall use the Licensed Software by agreeing with the terms of this Software License Agreement.
Article 8 Termination In case the User falls under any of the events described in the following items, the Licensor may immediately terminate this Agreement or claim that the User compensates for the damage incurred by the Licensor due to such event: (1) when the User violated any provision of this Agreement; or (2) when a petition has been filed against the User for an attachment, provisional attachment, provisional disposition or any other compulsory execution.
Important Notice concerning the Software Software License Attached to the Product : The Software embedded in the Product is composed of several independent software components, and in each of such individual components (hereinafter the “Licensed Software”), a copyright of either JVCKENWOOD Corporation (hereinafter “JKC”) or a third party subsists. The Product uses the software component designated in the End-User License Agreement that was executed between JKC and a third party (hereinafter “EULA”).
B5A-4078-00 © 2021 JVCKENWOOD Corporation GY-HM250U/GY-HM250E GY-HM180U/GY-HM180E GY-HM170U/GY-HM170E 4K MEMORY CARD CAMERA RECORDER .
