INSTRUCTIONS (BASIC) . 4K MEMORY CARD CAMERA RECORDER GY-HM200U/GY-HM200E GY-HM170U/GY-HM170E This manual provides a brief explanation on operating this camera recorder. For detailed operation methods and camera settings, please refer to the “INSTRUCTIONS” provided in the supplied CD-ROM or the following Mobile User Guide. . The illustration here shows how the handle unit is attached using the unit supplied with GY-HM200U/GY-HM200E. GY-HM170U/GY-HM170E do not come with a handle unit.
FOR USA These are general IMPORTANT SAFEGUARDS and certain items may not apply to all appliances. IMPORTANT SAFEGUARDS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Safety Precautions This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FOR USA AND CANADA Introduction CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Changes or modifications not approved by JVC could void the user’s authority to operate the equipment.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. POUR CANADA ATTENTION AVERTISSEMENT : POUR EVITER LES RISQUES D’INCENDIE OU D’ELECTROCUTION, NE PAS EXPOSER L’APPAREIL A LA PLUIE NI A L’HUMIDITE. ATTENTION: POUR EVITER TOUT RISQUE D’ELECTROCUTION NE PAS OUVRIR LE BOITER. AUCUNE PIECE INTERIEURE N’EST A REGLER PAR L’UTILISATEUR. SE REFERER A UN AGENT QUALIFIE EN CAS DE PROBLEME.
Introduction When the equipment is installed in a cabinet or on a shelf, make sure that it has sufficient space on all sides to allow for ventilation (10 cm (3-15/16") or more on both sides, on top and at the rear). Do not block the ventilation holes. (If the ventilation holes are blocked by a newspaper, or cloth etc. the heat may not be able to get out.) No naked flame sources, such as lighted candles, should be placed on the apparatus.
IMPORTANT (for owners in the U.K.) Connection to the mains supply in the United Kingdom. DO NOT cut off the mains plug from this equipment. This equipment is in conformity with the provisions and protection requirements of the corresponding European Directives. This equipment is designed for professional video appliances and can be used in the following environments: Controlled EMC environment (for example, purpose-built broadcasting or recording studio), and rural outdoors environments.
CAUTION: Dear Customer Introduction To avoid electric shock or damage to the unit, first firmly insert the small end of the power cord into the AC Adapter until it is no longer wobbly, and then plug the larger end of the power cord in to an AC outlet. This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety.
o Para Brasil Battery Pack The supplied battery pack is a lithium-ion battery. Before using the supplied battery pack or an optional battery pack, be sure to read the following cautions: To avoid hazards Terminals ... do not burn. ... do not short-circuit the terminals. Keep it away from metallic objects when not in use. K When transporting, carry the battery in a Terminals plastic bag. ... do not modify or disassemble. ...
Contents Introduction Introduction Safety Precautions ............................................ 4 Contents .......................................................... 10 Verifying the Accessories ................................ 10 Names of Parts ................................................ 11 Preparations Attaching the Handle Unit ................................ 14 Adjusting the Grip Belt ..................................... 14 Charging the Battery ........................................
Names of Parts B C D E H o Bottom F G . A Built-in Microphone B Handle Unit K * GY-HM170U/GY-HM170E does not come with the handle unit. For details on purchasing the handle unit, please contact the local dealers in your area. Memo : 0 The handle unit is detached from the camera recorder unit in the factory shipment. For details on attaching the handle unit, please refer to [Attaching the Handle Unit K] .
Side Control Panel A [HOST] USB Host Terminal K B [DEVICE] USB Mini Terminal C [HDMI] HDMI Output Terminal E D D [SDI OUT] SDI Output Terminal K Introduction C F B A G M . Rear Terminal GY-HM200U/GY-HM200E L K J I H A [FULL AUTO] Full Auto Selection Button Press and hold the button to switch the Full Auto mode ON and OFF. Full Auto mode adjusts the Iris, Gain, Shutter and White Balance automatically. Memo : 0 This camera recorder is set to Full Auto mode in the factory default.
LCD Monitor D C H I J B A M L K . A LCD Monitor B [CANCEL/STOP] Cancel Button C LCD Cross-Shaped Button (JKHI)/Set Button (R) D [MENU/THUMB] Menu/Thumbnail Button E [LOLUX/3] Low-light Shooting/User 3 Button F [C.
Preparations Attaching the Handle Unit Adjusting the Grip Belt The handle unit is detached from the camera recorder unit in the factory shipment. * GY-HM170U/GY-HM170E does not come with the handle unit. For details on purchasing the handle unit, please contact the local dealers in your area. To use the handle unit, attach it by following the steps below. * Attach or detach the handle unit when the power is turned off. Open the pad and adjust the position of the grip belt accordingly. .
Memo : 0 Blinking of the [POWER/CHARGE] lamp during charging indicates the charge level.
Attaching/Detaching the Hood Attaching the Hood Align the markings on the camera recorder and hood; turn the hood in the direction of the arrow (clockwise) until it is locked. Configuring the Initial Settings Preparations When the power is first turned on, the Initial Setting screen for performing the initial settings in the camera recorder appears. Set the date/time of the built-in clock in the [Initial Setting] screen. All operations are disabled until initial settings are complete. . .
Memo : 0 The menus and messages on the screen of the LCD monitor or viewfinder are displayed in the selected language. 4 Press the Set button (R) after confirming the exit screen. The [Initial Setting] screen appears. 0 For U models 2 Select a language using the cross-shaped button (JK), and press the Set button (R). The Initial Setting screen appears. Initial Setting UTC-05:00 Preparations Set . 0 For E models . 3 Ensure the lens cap is attached, and press the Set button (R).
Usable Cards o When [Main Menu] B [System] B [Record Set] B [Record Format] B [Format] is set to “QuickTime” System 4K HD Resolution 2160p 1080i/1080p Format Setting and Usable SD Card Combinations System Format Bit Rate Preparations 4K - - HD QuickTime 50M (YUV422), 50M (XHQ) 35M (UHQ) AVCHD - - Class 6 or higher Class 4 or higher SD Web Caution : 0 Using cards other than those from Panasonic, TOSHIBA or SanDisk may result in recording failure or data loss.
1 Open the SD card cover by sliding the cover in the direction indicated by the arrow. 2 Insert an SD card with the notched corner pointing up. The status indicator of the card slot to which the card was inserted lights up in red. 3 Close the SD card cover in the direction indicated by the arrow. 4 Select [Format] and press the Set button (R). Format Media Formatting (Initializing) SD Cards 1 Select [System] B [Media] B [Format Media].
Clips Recorded to SD Cards Example: QuickTime Folders in the SD Card A BCG 00 01 The captured image is recorded into different folders according to the [System] and [WFormat]/ [YFormat] settings. System Preparations 4K/HD/SD/ Web HD/SD/ Web WFormat/ YFormat QuickTime Record Folder AVCHD PRIVATE/AVCHD DCIM Memo : 0 By formatting (initializing) the SD card from the [Format Media] menu on the camera recorder, folders required for recording in the current [System] settings will be generated.
Basic Shooting Procedures Shooting Preparations 4 3 . 2 1 . 1 Supply battery or AC adapter power to the camera recorder. 2 Insert an SD card. 3 Turn on the power of the camera recorder. Hold down the lock button (blue) at the center of the [POWER ON/OFF] switch to set to “ON”. The camera recorder starts up in Camera mode and is ready for recording. 4 Adjust the angle of the LCD monitor and viewfinder.
Miscellaneous Functions for Shooting and Recording Methods This camera recorder is equipped with various functions for shooting. The functions described here are the typical functions of the camera recorder. Miscellaneous Functions for Shooting 0 Assignment of user buttons: Shooting 0 0 0 0 0 You can assign functions to the buttons and use them as user buttons. Functions can be assigned to the buttons according to the usability.
Playing Recorded Clips Use the operation buttons on the side control panel of the camera recorder to play back. A B C . 0 You can confirm the playback sound from the monitor speaker, or the headphone connected to the [x] terminal. When a headphone is connected to the [x] terminal, sound cannot be output from the monitor speaker. 0 Adjust the volume of the monitor speaker and headphone using the J / K volume buttons on the side of the camera recorder.
Connecting External Monitor * Select the output signal in [A/V Set] B [HDMI/SDI Out]. 0 To output live or playback video images and Audio (Lch) Video GND Audio (Rch) GY-HM200U/ GY-HM200E only Connecting External Devices audio sound to an external monitor, select the output signals from the camera recorder, and connect using an appropriate cable according to the monitor to be used. 0 Choose the most suitable terminal according to the monitor in use.
Loading Clips to the PC 0 You can load clips to a PC by connecting the camera recorder to the PC via the USB port. Doing so enables clips stored in the SD card to be managed and edited on the PC. 0 Files on the SD card can be managed/edited on the connected PC in this mode only for USB mass storage class devices that are recognized by the said PC as a peripheral drive. Memo : 0 Files cannot be written to the SD card. 1 Connect the camera recorder to the PC using a USB cable.
Functions of Network Connection K 0 The network function can be operated by connecting one of the following adapters to the [HOST] terminal at the side terminal section. 0 Wireless LAN adapter 0 Ethernet adapter 0 Cellular adapter 0 The network feature comprises web-browserbased functions using devices such as a smartphone, tablet terminal, or PC, as well as FTP and live streaming functions that run via thumbnail screens and menu operation.
Menu Screen Hierarchical Chart TC/UB... TC Generator TC Preset Main Menu... Camera Function... Bars OIS Flicker Correction Shutter AE Speed AGC Limit Auto Iris Limit (OPEN) Auto Iris Limit (CLOSE) EEI Limit Smooth Trans FAW GAIN L GAIN M GAIN H Dynamic Zoom UB Mode Drop Frame LCD/VF... Shooting Assist... Marker Settings... Display Settings... VF SW VF Color VF Bright VF Contrast LCD Bright LCD Contrast LCD Backlight LCD Mirror Handle Zoom Speed L LCD/VF Peaking Handle Zoom Speed M A/V Set...
Basic Operations in Menu Screen 0 Press the [MENU/THUMB] button on the LCD 0 0 0 0 0 monitor to display the menu screen on the LCD monitor and viewfinder. Various settings for shooting and playback can be configured on the menu screen. There are two types of menu screens - [Main Menu] and [Favorites Menu]. [Main Menu] contains all the setting items of the camera recorder, classified according to functions and uses, while [Favorites Menu] allows users to customize the menu items freely.
Display Screen Display Screen in Camera Mode Display 0 screen This screen displays the event. It is also used to display warnings only. YX W a A ※1 U ※2 282min 100min 50min 5 . 6f t ND 1 /16 AE E+6 18dB F1.6 P 15000K 15000K 1/ 100 0 ※2 H I . *1 *2 Appears only during warnings Appears only during operation Display 1 screen YXW a A 00: 00: 00.00 Jan 24 , 2015 12 :34 :56 F 4030 20 10 5 . 6f t ND 1 /16 0 AE+6 18dB F1.6 1/ 100 P 15000K 0 G H IJ .
F Audio Level Meter 0 Displays the audio levels of CH1 and CH2. 0 The V icon appears on the screen when in Manual mode. Memo : 0 This item is not displayed when [Main Menu] B [LCD/VF] B [Display Settings] B [Media Remain] is set to “Off”. However, warnings will be displayed. 0 Displayed on the Display 0 and Display 1 screens only in the case of warnings. (When the remaining time is shorter than 3 minutes) The icons appear on all display screens in the following cases.
J AE Lock The U icon is displayed during AE lock. K White Balance Mode Displays the current white balance mode. (*****K indicates color temperature) A<*****K> : When the white balance is set to A. B<*****K> : When the white balance is set to B. P<*****K> : When the white balance is set to PRST. P : The color temperature setting with respect to the Auto WB value is appropriate when white balance is set to PRST and the WB indicator to “On”, : Locked in the Full Auto White Balance mode.
R Focus Assist 0 “FOCUS” is displayed when auto focus is activated. 0 When ACCU-Focus is enabled, “ACCUFOCUS” blinks for about 10 seconds while Focus Assist starts up, after which the “FOCUS” indicator lights up. 0 If recording starts while [ACCU-Focus] is active, [ACCU-Focus] will be forcibly deactivated. Memo : 0 Displayed in the Display 0 screen only when there is a change. S Date/Time Display Displays the current date and time.
W Live streaming mark K When [Main Menu] B [System] B [Network]/ [Settings] B [Live Streaming Set] B [Live Streaming] is set to “On”, the distribution status is displayed. Icon . . .
Display Screen in Media Mode Media Display 0 Screen This screen displays the media status or event. It is also used to display warnings only. P A ※ ON M L 1000/ 2000 282min 00: 00: 00.00 C Resolution Displays the video image resolution. D Frame Rate/Bit Rate Displays the frame rate and bit rate in pairs. E Operation Guide Displays a guide for the current operation buttons. F Audio Level Meter Displays the audio levels of CH1 and CH2. 0 I G .
I Information Display The camera information display turns on and off each time you press the [OIS/6] button. 0 Camera information display displays only information of Gain, Iris, Shutter and White Balance that have been recorded. P 0dB F1.6 1/ 100 13000K Camera Information Display . Memo : 0 Trimming information is displayed while trimming is in progress. In this case, pressing the [OIS/6] button does not switch the display. L Event/Warning Display Area Displays error messages.
Status Screen 0 This screen allows you to check the current settings. 0 To display the status screen, press the [STATUS] button in the normal screen. 0 The status display differs according to the operation mode (two types). 0 Press the [STATUS] button to switch to the display screen. 0 Press the [MENU] button at each status screen (other than the [Camera 1] screen) to enter the setting screen.
Troubleshooting Symptom Power does not turn on. Unable to start recording. Action 0 Is the AC adapter properly connected? 0 Is the battery charged? 0 Is the power turned on immediately after it is turned off? 0 0 0 Camera image is not output on the LCD monitor and viewfinder screen. Playback does not start after selecting a clip thumbnail and pressing the Set button (R). Images on the LCD monitor and viewfinder screen appear dark or blurred.
Symptom Incorrect display on the viewfinder. The actual recording time is shorter than the estimated time. Cannot connect to wireless LAN. K Action 0 Is [LCD/VF] B [VF SW] set to “Enable”, and is the viewfinder in use without being pulled out? To use the viewfinder in this setting, pull out the viewfinder. 0 The recordable time may be shorter depending on the shooting conditions or the subject. 0 Check the mode of connection and method of setting ([SSID] and [Passphrase] in cases other than WPS).
Precautions for Proper Use Storage and Usage Locations o When this unit is not in use, be sure to set the [POWER ON/OFF] switch to “OFF” in order to reduce power consumption. Maintenance o Turn off the power before performing any maintenance. o Wipe the external cabinet of the unit with a soft cloth. Do not wipe the body with benzene or thinner. Doing so may cause the surface to melt or turn cloudy.
Regular Inspection (Maintenance) o Under normal environment, dust will accumulate on the camera recorder when it is used over a long period. Dust may enter the camera recorder especially if it is used outdoors. This may affect the image and sound quality of the camera recorder. Check and replace the fan after every 9000 hours (suggested guideline). You can check the usage time of the fan in [System] B [System Information] B [Fan Hour].
Others o The LCD monitor and viewfinder screen are manufactured using high-precision technology. Black spots may appear on the LCD monitor and viewfinder screen, or red, blue, and/or white spots may not disappear. However, this is not a malfunction and these spots are not recorded on the SD card. o If you use this unit continuously for a long period of time, the characters displayed in the viewfinder may temporarily remain on the screen. This is not recorded on the SD card.
Copyright o Any recordings made on this camera recorder that are played back for profit or public preview may infringe on the rights of the owner of the recordings. Do not use the recordings for purpose other than personal enjoyment without prior consent from the owner.
Specifications Item [x] terminal Output General Item Power Power consumption Mass Description DC 12 V K 0 Approx. 7.9 W (*1) 0 Approx. 7.3 W (*2) M 0 Approx. 7.6 W (*1) 0 Approx. 6.7 W (*2) K 0 Approx. 1.6 kg (with battery) M 0 Approx. 1.
Video/Audio Others Item Description Recording time Approx. 25 minutes (8 GB SD card, 35 Mbps, VBR mode) 4K mode Recording file QuickTime File Format format MPEG-4 AVC/H.264 150 Mbps Video (Max) 3840x2160/30p, 25p, 24p Audio LPCM 2ch, 48 kHz/16 Bit HD mode (QuickTime) Recording file QuickTime File Format format Video MPEG-4 AVC/H.264 50 Mbps YUV422 (Max) 1920x1080/59.94p, 59.94i, mode, XHQ mode 29.97p, 23.98p, 50p, 50i, 25p UHQ Mode MPEG-4 AVC/H.264 35 Mbps (Max) 1920x1080/59.94i, 30p, 23.
Software License Agreement The software embedded in the Product (hereinafter the “Licensed Software”) provided by JVC KENWOOD Corporation (hereinafter the “Licensor”) is copyrighted to or sublicensable by the Licensor, and this Agreement provides for the terms and conditions which Users shall follow in order to use the Licensed Software. The User shall use the Licensed Software by agreeing with the terms of this Software License Agreement.
Article 8 Termination In case the User falls under any of the events described in the following items, the Licensor may immediately terminate this Agreement or claim that the User compensates for the damage incurred by the Licensor due to such event: (1) when the User violated any provision of this Agreement; or (2) when a petition has been filed against the User for an attachment, provisional attachment, provisional disposition or any other compulsory execution.
Important Notice concerning the Software Software License Attached to the Product : The Software embedded in the Product is composed of several independent software components, and in each of such individual components (hereinafter the “Licensed Software”), a copyright of either JVC KENWOOD Corporation (hereinafter “JKC”) or a third party subsists. The Product uses the software component designated in the End-User License Agreement that was executed between JKC and a third party (hereinafter “EULA”).
B5A-0453-00 © 2015 JVC KENWOOD Corporation GY-HM200U/GY-HM200E/ GY-HM170U/GY-HM170E 4K MEMORY CARD CAMERA RECORDER .