MasterPage: FrontCover GR-DX97PAL.book Page 1 Tuesday, January 6, 2004 12:44 PM Dear Customer, Thank you for purchasing this digital video camera. Before use, please read the safety information and precautions contained in the pages 3 – 4 to ensure safe use of this product. ENGLISH DIGITAL VIDEO CAMERA GR-DX97 GR-DX77 GR-DX67 GR-DX57 GR-DX48 GR-DX37 GR-DX28 GR-DX27 6 GETTING STARTED VIDEO RECORDING & PLAYBACK 15 DIGITAL STILL CAMERA (D.S.C.
MasterPage: Safety_Left GR-DX97PAL.book Page 2 Tuesday, January 6, 2004 12:44 PM 2 EN Major Features of this Camcorder Wipe/Fader Effects Backlight Compensation You can use the Wipe/Fader Effects to make prostyle scene transitions. (墌 pg. 34) Simply pressing the BACK LIGHT button brightens the image darkened by backlight. (墌 pg. 33) ● You can also select a spot metering area so that more precise exposure compensation is available. (墌 pg.
MasterPage: Safety_Right GR-DX97PAL.book Page 3 Tuesday, January 6, 2004 12:44 PM EN SAFETY PRECAUTIONS 3 Caution on Replaceable lithium battery IMPORTANT (for owners in the U.K.) Connection to the mains supply in the United Kingdom. DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer.
MasterPage: Safety_Left GR-DX97PAL.book Page 4 Tuesday, January 6, 2004 12:44 PM 4 EN SOME DO’S AND DON’TS ON THE SAFE USE OF EQUIPMENT This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. DO read the operating instructions before you attempt to use the equipment.
MasterPage: TOC_Heading0_Right GR-DX97PAL.book Page 5 Tuesday, January 6, 2004 12:44 PM CONTENTS GETTING STARTED 6 ADVANCED FEATURES Index ..............................................................................6 Provided Accessories ....................................................9 Power ...........................................................................11 Operation Mode ...........................................................12 Date/Time Settings .................................
MasterPage: Heading0_Left GR-DX97PAL.book Page 6 Tuesday, January 6, 2004 12:44 PM 6 EN GETTING STARTED Index LIGHT H NIG T FOCUS SET BA C K LI G H To open the connector cover, pull the bottom end of the cover, then open it. T Bottom end When Using the LCD Monitor Correct direction for opening Correct direction for closing The LCD monitor cannot be rotated downward ( direction) from the position illustrated above. Rotating to the wrong direction may cause a malfunction.
MasterPage: Start_Right GR-DX97PAL.book Page 7 Tuesday, January 6, 2004 12:44 PM GETTING STARTED Controls Indicators a Menu Button [MENU] (墌 pg. 27) b Sub Zoom Buttons [T/W] (墌 pg. 16) D POWER/CHARGE Lamp (墌 pg. 11, 15) E Tally Lamp (墌 pg. 15, 29) (墌 pg. 12) f Power Zoom Lever [T/W] (墌 pg. 16) g Dioptre Adjustment Control (墌 pg. 13) h Power Switch [A, M, PLAY, OFF] (墌 pg. 12) i Lock Button (墌 pg. 12) j Set Button [SET] (墌 pg. 27) k Stop Button [8] (墌 pg.
MasterPage: Left GR-DX97PAL.book Page 8 Tuesday, January 6, 2004 12:44 PM 8 EN GETTING STARTED During D.S.C. Recording Only (GR-DX97/77/67 only) 3 4 5 1024 6 During Both Video And D.S.C. Recording 8 1 2 15 7 a Image Size: 1024 (1024 x 768) or 640 (640 x 480) (墌 pg. 30) : Focus Icon (墌 pg. 21) : Interval Shooting Icon (墌 pg. 21) c Shooting Icon (墌 pg. 21) (Appears and blinks during shooting.) d Card Icon (墌 pg. 21) : Appears during shooting. : Blinks in white when a memory card is not loaded.
MasterPage: Start_Right GR-DX97PAL.book Page 9 Tuesday, January 6, 2004 12:44 PM GETTING STARTED During Video Playback 1 EN 9 Provided Accessories 2 34 5 6 12 B I T / M I X L BLANK SEARCH PUSH "STOP" BUTTON TO CANCEL 7 VO LUME 9 GETTING STARTED 1 0 . 11 . 04 10: 0 0 2 0 : 2 1 : 25 0 OR MIC 8 a Sound Mode Indicator (墌 pg. 30) b Blank Search Indicator (墌 pg. 18) c Thumbnail Storing Indicator (墌 pg. 36) d Tape Speed (墌 pg.
MasterPage: Left GR-DX97PAL.book Page 10 Tuesday, January 6, 2004 12:44 PM 10 EN GETTING STARTED How To Attach The Lens Cap How To Attach The Core Filter (for USB Cable (except GR-DX27) and Audio Extension Cable) To protect the lens, attach the provided lens cap to the camcorder as shown in the illustration. Attach the core filters to the cables. The core filter reduces interference. 1 Release the stoppers on both ends of the core filter.
MasterPage: Start_Right GR-DX97PAL.book Page 11 Tuesday, January 6, 2004 12:44 PM GETTING STARTED EN Power This camcorder’s 2-way power supply system lets you choose the most appropriate source of power. Do not use provided power supply units with other equipment. Charging The Battery Pack 11 ● Since the AC Adapter processes electricity internally, it becomes warm during use. Be sure to use it only in wellventilated areas.
MasterPage: Left GR-DX97PAL.book Page 12 Tuesday, January 6, 2004 12:44 PM 12 EN GETTING STARTED Power-Linked Operation Operation Mode To turn on the camcorder, set the Power Switch to any operation mode except “OFF” while pressing down the Lock Button located on the switch.
MasterPage: Start_Right GR-DX97PAL.book Page 13 Tuesday, January 6, 2004 12:44 PM GETTING STARTED EN Brightness Adjustment Of The Display 1 Adjust the velcro strip. 2 Pass your right hand through the loop and grasp the grip. 3 Adjust your thumb and fingers through the grip to easily operate the Recording Start/Stop Button and Power Zoom Lever. Be sure to fasten the velcro strip to your preference. 1 Set the Power Switch to “M” or “PLAY” while pressing down the Lock Button located on the switch.
MasterPage: Left GR-DX97PAL.book Page 14 Tuesday, January 6, 2004 12:44 PM 14 EN GETTING STARTED Loading/Unloading A Cassette The camcorder needs to be powered up to load or eject a cassette. PUSH HERE Cassette holder cover Loading/Unloading A Memory Card (GR-DX97/77/67 only) The provided memory card is already inserted in the camcorder at the time of purchase. Card Cover (MEMORY CARD) OPEN/EJECT Memory card Erase protection tab Clipped edge Cassette holder Make sure the window side is facing out.
VIDEO RECORDING & PLAYBACK MasterPage: Video_Heading0_Right GR-DX97PAL.book Page 15 Tuesday, January 6, 2004 12:44 PM VIDEO RECORDING EN 15 Tape Remaining Time Basic Recording NOTE: Before continuing, perform the procedures listed below: ● Power (墌 pg. 11) ● Loading A Cassette (墌 pg. 14) Approximate tape remaining time appears on the display. “– h – – m” means the camcorder is calculating the remaining time. When the remaining time reaches 2 minutes, the indication starts blinking.
MasterPage: Left GR-DX97PAL.book Page 16 Tuesday, January 6, 2004 12:44 PM 16 EN VIDEO RECORDING Zooming Journalistic Shooting Produces the zoom in/out effect, or an instantaneous change in image magnification. In some situations, different shooting angles may provide more dramatic results. Hold the camcorder in the desired position and tilt the LCD monitor in the most convenient direction. It can rotate 270° (90° downward, 180° upward).
MasterPage: Advan_Heading0_Right GR-DX97PAL.book Page 17 Tuesday, January 6, 2004 12:44 PM VIDEO PLAYBACK EN Time Code During recording, a time code is recorded on the tape. This code is to confirm the location of the recorded scene on the tape during playback. 17 Normal Playback 4/9 Power Switch Display 5 Minutes Lock Button Seconds * Frames are not displayed during recording. If recording starts from a blank portion, the time code begins counting from “00:00:00” (minute:second:frame).
MasterPage: Left GR-DX97PAL.book Page 18 Tuesday, January 6, 2004 12:44 PM 18 EN VIDEO PLAYBACK Shuttle Search Connections To A TV Or VCR Allows high-speed search in either direction during video playback. 1) During playback, press 5 for forward search, or 3 for reverse search. 2) To resume normal playback, press 4/9. To AV connector Open the cover. ● During playback, press and hold 5 or 3. The search continues as long as you hold the button. Once you release the button, normal playback resumes.
MasterPage: Video_Right GR-DX97PAL.book Page 19 Tuesday, January 6, 2004 12:44 PM VIDEO PLAYBACK EN To choose whether or not the following displays appear on the connected TV 19 Buttons And Functions ● Date/Time Set “DATE/TIME” to “AUTO”, “ON” or “OFF”. (墌 pg. 27, 31) Or, press DISPLAY on the remote control to turn on/off the date indication. ● Time Code Set “TIME CODE” to “ON” or “OFF”. (墌 pg. 27, 31) ● Indications other than date/time and time code Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”. (墌 pg.
MasterPage: Left GR-DX97PAL.book Page 20 Tuesday, January 6, 2004 12:44 PM 20 EN VIDEO PLAYBACK . Zoom (T/W) PAUSE or (Up) SLOW (YI) SLOW (IU) PLAY (Right) (Left) STOP or (Down) SHIFT Slow-Motion Playback During normal video playback, press SLOW (YI or IU) more than approx. 2 seconds. ● After approx. 10 minutes, normal playback resumes. ● To pause Slow-Motion playback, press PAUSE (9). ● To stop Slow-Motion playback, press PLAY (U).
DIGITAL STILL CAMERA (D.S.C.) RECORDING & PLAYBACK (GR-DX97/77/67 only) MasterPage: DSC_Heading0_Right GR-DX97PAL.book Page 21 Tuesday, January 6, 2004 12:44 PM D.S.C. RECORDING (GR-DX97/77/67 only) EN Basic Shooting (D.S.C. Snapshot) You can use your camcorder as a Digital Still Camera for taking snapshots. Still images are stored in the memory card. 21 Approximate Number of Storable Images ● The number increases or decreases depending on the Picture Quality/Image Size, etc.
MasterPage: Heading0_Left GR-DX97PAL.book Page 22 Tuesday, January 6, 2004 12:44 PM 22 EN D.S.C. PLAYBACK (GR-DX97/77/67 only) Normal Playback Of Images Auto Playback Of Images Images shot with the camcorder are automatically numbered, then stored in numerical order in the memory card. You can view the stored images, one at a time, much like flipping through a photo album. Power Switch You can run through all the images stored in memory card automatically.
MasterPage: DSC_Right GR-DX97PAL.book Page 23 Tuesday, January 6, 2004 12:44 PM D.S.C. PLAYBACK (GR-DX97/77/67 only) EN Index Playback Of Files Removing On-Screen Display You can view several different files stored in the memory card at a time. This browsing capability makes it easy to locate a particular file you want. 1 For Index Playback of image files, perform steps 1 – 5 in “Normal Playback Of Images” (墌 pg. 22).
MasterPage: Heading0_Left GR-DX97PAL.book Page 24 Tuesday, January 6, 2004 12:44 PM 24 EN ADDITIONAL FEATURES FOR D.S.C. (GR-DX97/77/67 only) NOTES: E-Mail Clip Recording You can make video clips in 160 x 120 pixels from realtime camera image or recorded video footage and store them in a memory card as files which can be conveniently sent via E-Mail. To make video clips from real-time camera image 1 Load a memory card. (墌 pg. 14) 2 Set the VIDEO/MEMORY Switch to “MEMORY”.
MasterPage: DSC_Right GR-DX97PAL.book Page 25 Tuesday, January 6, 2004 12:44 PM ADDITIONAL FEATURES FOR D.S.C. (GR-DX97/77/67 only) EN Protecting Files The Protect mode helps prevent the accidental erasure of files. 1 To protect the file... ...for images, display its playback screen. (墌 pg. 22) ...for video clips, display its playback screen. (墌 pg. 22) 2 Press MENU. The Menu Screen appears. 3 Press or to select “PROTECT”, and press SET. The Sub Menu appears.
MasterPage: Left GR-DX97PAL.book Page 26 Tuesday, January 6, 2004 12:44 PM 26 EN ADDITIONAL FEATURES FOR D.S.C. (GR-DX97/77/67 only) Setting Print Information (DPOF Setting) This camcorder is compatible with the DPOF (Digital Print Order Format) standard in order to support future systems such as automatic printing.
ADVANCED FEATURES MasterPage: Advan_Heading0_Right GR-DX97PAL.book Page 27 Tuesday, January 6, 2004 12:44 PM MENUS FOR DETAILED ADJUSTMENT EN 27 Menus without Sub Menus Changing The Menu Settings This camcorder is equipped with an easy-to-use, onscreen menu system that simplifies many of the more detailed camcorder settings. (墌 pg. 28 – 31) Power Switch v WIPE/FADER (墌 pg. 34) r PROGRAM AE (墌 pg. 35) p EXPOSURE (墌 pg. 33) u W. BALANCE (墌 pg. 34) Selected menu icon blinks.
MasterPage: Left GR-DX97PAL.book Page 28 Tuesday, January 6, 2004 12:44 PM 28 EN MENUS FOR DETAILED ADJUSTMENT Recording Menus CAMERA The “m CAMERA” settings are effective when the Power Switch is set to both “A” and “M”. However, the menu settings can be changed only when the Power Switch is set to “M”. [ ] = Factory-preset REC MODE [SP]: To record in the SP (Standard Play) mode LP: Long Play—more economical, providing 1.5 times the recording time. NOTES: ● Audio Dubbing (墌 pg.
MasterPage: Advan_Right GR-DX97PAL.book Page 29 Tuesday, January 6, 2004 12:44 PM MENUS FOR DETAILED ADJUSTMENT EN * Available only when the VIDEO/MEMORY Switch is set to “VIDEO”. (GR-DX97/77/67 only) WIND CUT [OFF]: Disengages the function. ON : Helps cut down on noise created by wind. The “ ” indicator appears. The quality of the sound will change. This is normal. SYSTEM The “s SYSTEM” functions which are set when the Power Switch is set to “M” are also applied when the Power Switch is set to “PLAY”.
MasterPage: Left GR-DX97PAL.book Page 30 Tuesday, January 6, 2004 12:44 PM 30 EN MENUS FOR DETAILED ADJUSTMENT TIME CODE [OFF]: Time code is not displayed. ON: Time code is displayed on the camcorder and on the connected TV. Frame numbers are not displayed during recording. (墌 pg. 17) AUX MIC OFF: Auxiliary microphone level indicator does not appear. [ON]: Displays auxiliary microphone level indicator when optional microphone is connected. (墌 pg. 7) CLOCK ADJ. 墌 pg.
MasterPage: Advan_Heading0_Right GR-DX97PAL.book Page 31 Tuesday, January 6, 2004 12:44 PM FEATURES FOR RECORDING EN SYSTEM SNAPSHOT Recording Start/Stop Button Each setting is linked with “s SYSTEM”, which appears when the Power Switch is set to “M”. FOCUS H NIG T VIDEO DISPLAY [ ] = Factory-preset BRIGHT 墌 pg. 13, “Brightness Adjustment Of The Display” ON SCREEN OFF / [LCD] / LCD/TV When set to “OFF”, the camcorder’s display disappears.
MasterPage: Left GR-DX97PAL.book Page 32 Tuesday, January 6, 2004 12:44 PM 32 EN FEATURES FOR RECORDING Night Scope Manual Focus Makes dark subjects or areas even brighter than they would be under good natural lighting. Although the recorded image is not grainy, it may look as if it is strobing due to the slow shutter speed. 1 Set the Power Switch to “M”. 2 Press NIGHT so that the Night-Scope indicator “ ” appears. ● The shutter speed is automatically adjusted to provide up to 30 times sensitivity.
MasterPage: Advan_Right GR-DX97PAL.book Page 33 Tuesday, January 6, 2004 12:44 PM FEATURES FOR RECORDING EN Exposure Control Backlight Compensation Manual exposure control is recommended in the following situations: ● When shooting using reverse lighting or when the background is too bright. ● When shooting on a reflective natural background such as at the beach or when skiing. ● When the background is overly dark or the subject is bright. 1 Set the Power Switch to “M”. 2 Set “p” to “MANUAL”. (墌 pg.
MasterPage: Left GR-DX97PAL.book Page 34 Tuesday, January 6, 2004 12:44 PM 34 EN FEATURES FOR RECORDING White Balance Adjustment Wipe Or Fader Effects The white balance that refers to the correctness of colour reproduction under various lighting. If the white balance is correct, all other colours will be accurately reproduced. The white balance is usually adjusted automatically.
MasterPage: Advan_Right GR-DX97PAL.book Page 35 Tuesday, January 6, 2004 12:44 PM FEATURES FOR RECORDING EN 1 Set the Power Switch to “M”. 2 Set “r” to the desired mode. (墌 pg. 27) ● The PROGRAM AE menu disappears and the selected effect is activated. ● The selected effect indicator appears. To deactivate the selected effect Select “OFF” in step 2. The effect indicator disappears. NOTES: ● Program AE with special effects can be changed during recording or during Record-Standby.
MasterPage: Left GR-DX97PAL.book Page 36 Tuesday, January 6, 2004 12:44 PM 36 EN FEATURES FOR RECORDING To make thumbnail images after video recording manually 6 Press SET. The NAVIGATION 1 Set “NAVIGATION” to “MANUAL”. (墌 pg. 27, 28) 2 Set the Power Switch to “A” or “M”. 3 After the recording, press NAVI STORE. 7 Press ● The “ ” indicator appears briefly and the captured image is stored in the memory card as a thumbnail image.
MasterPage: Advan_Heading0_Right GR-DX97PAL.book Page 37 Tuesday, January 6, 2004 12:44 PM EDITING EN NOTES: Dubbing To Or From A VCR To AV connector Open the cover. S/AV/Editing cable (provided) 37 mark ● It is recommended to use the AC Adapter as the power supply instead of the battery pack. (墌 pg. 11) ● To choose whether or not the following displays appear on the connected TV • Date/time Set “DATE/TIME” to “AUTO”, “ON” or “OFF”. (墌 pg.
MasterPage: Left GR-DX97PAL.book Page 38 Tuesday, January 6, 2004 12:44 PM 38 EN EDITING Dubbing To Or From A Video Unit Equipped With A DV Connector (Digital Dubbing) It is also possible to copy recorded scenes from the camcorder onto another video unit equipped with a DV connector. Since a digital signal is sent, there is little if any image or sound deterioration. To use this camcorder as a player 1 Make sure all units are turned off.
MasterPage: Advan_Right GR-DX97PAL.book Page 39 Tuesday, January 6, 2004 12:44 PM EDITING EN Connection To A Personal Computer [A] Using USB cable (except GR-DX27) [B] Using DV cable OR 39 [A] Using USB cable (except GR-DX27) It is possible to do the following things: ● Transfer still images stored on a memory card to a PC. (GR-DX97/77/67 only) ● Transfer still/moving images recorded on a tape to a PC. ● Capture still/moving images in real-time. ● Use this camcorder as a WebCam.
MasterPage: Left GR-DX97PAL.book Page 40 Tuesday, January 6, 2004 12:44 PM 40 EN EDITING Audio Dubbing Insert Editing The audio track can be customised only when recorded in the 12-BIT and SP modes. (墌 pg. 28) ● Use the provided remote control or an optional remote control kit RM-V717KITU. Stereo Microphone Speaker REW INSERT START/ STOP PAUSE PLAY STOP A.DUB Microphone Connector 1 Play back the tape to locate the point where editing will start, then press PAUSE (9). 2 While holding A.
MasterPage: Advan_Right GR-DX97PAL.book Page 41 Tuesday, January 6, 2004 12:44 PM EDITING EN Create edited videos easily using your camcorder as the source player. You can select up to 8 “cuts” for automatic editing, in any order you like. R.A.Edit is more easily performed when the MBR (Multi-Brand Remote) is set to operate with your brand of VCR (see “VCR CODE LIST”), but can also be performed by operating the VCR manually.
MasterPage: Left GR-DX97PAL.book Page 42 Tuesday, January 6, 2004 12:44 PM 42 EN EDITING Make Connections Also refer to page 18. 1 A A JVC VCR equipped with a Remote PAUSE connector Connect the editing cable to the Remote PAUSE connector. B A JVC VCR not equipped with a Remote PAUSE connector but equipped with an R.A.EDIT connector Connect the editing cable to the R.A.EDIT connector. C A VCR other than above Connect the editing cable to the remote control’s PAUSE IN connector. Open the cover.
MasterPage: Advan_Right GR-DX97PAL.book Page 43 Tuesday, January 6, 2004 12:44 PM EDITING EN Select Scenes 43 NOTES: RM-V717U (optional) PLAY FADE/WIPE EFFECT EDIT IN/OUT PAUSE R.A.EDIT ON/OFF CANCEL VCR REC STBY 6 Press PLAY (U) and then press R.A.EDIT ON/OFF on the remote control. ● The Random Assemble Editing Menu appears. 7 If using a Wipe/Fader at the beginning of the scene, press FADE/WIPE on the remote control.
MasterPage: Left GR-DX97PAL.book Page 44 Tuesday, January 6, 2004 12:44 PM 44 EN EDITING Automatic Editing To VCR 5 Press 13 Rewind the tape in the camcorder to the beginning 6 Press of the scene you want to edit and press PAUSE (9). 14 Press VCR REC STBY (79), or manually engage the VCR’s Record-Pause mode. 15 Press the Recording Start/Stop Button on the or to select “t”, and press SET. The VIDEO Menu appears. or to select “SYNCHRO”, and press SET. The value for “SYNCHRO” is highlighted.
REFERENCES MasterPage: Ref_Heading0_Right GR-DX97PAL.book Page 45 Tuesday, January 6, 2004 12:44 PM TROUBLESHOOTING EN The camcorder is a microcomputer-controlled device. External noise and interference (from a TV, a radio, etc.) might prevent it from functioning properly. In such cases, first disconnect its power supply unit (battery pack, AC Adapter, etc.) and wait a few minutes; and then re-connect it and proceed as usual from the beginning. Power No power is supplied.
MasterPage: Left GR-DX97PAL.book Page 46 Tuesday, January 6, 2004 12:44 PM 46 EN TROUBLESHOOTING Other problems The POWER/CHARGE lamp on the camcorder does not light. ● Charging is difficult in places subject to extremely high/low temperatures. HTo protect the battery, it is recommended to charge it in places with a temperature of 10°C to 35°C. (墌 pg. 49) “SET DATE/TIME!” appears. ● The built-in clock’s rechargeable lithium battery is discharged. ● The previously set date/time is erased.
MasterPage: Ref_Right GR-DX97PAL.book Page 47 Tuesday, January 6, 2004 12:44 PM TROUBLESHOOTING EN Warning Indications A. DUB ERROR! Displays the battery remaining power. Remaining power level High 47 Exhausted As the battery power comes close to nil, the battery indicator blinks. When the battery power is exhausted, power turns off automatically.
MasterPage: Heading0_Left GR-DX97PAL.book Page 48 Tuesday, January 6, 2004 12:44 PM USER MAINTENANCE 48 EN NO E-MAIL CLIP STORED Appears if there are no video clip files stored in the memory card when you attempt memory card playback. (GR-DX97/77/67 only) CARD ERROR! Appears when the camcorder does not recognise the loaded memory card. Remove the memory card once and insert it again. Repeat these procedures until no indication appears. If the indication still appears, the memory card is corrupted.
MasterPage: Ref_Heading0_Right GR-DX97PAL.book Page 49 Tuesday, January 6, 2004 12:44 PM CAUTIONS EN 49 Battery Packs Cassettes The supplied battery pack is a lithium-ion battery. Before using the supplied battery pack or an optional battery pack, be sure to read the following cautions: ● To avoid hazards To properly use and store your cassettes, be sure to read the following cautions: ● During use ● To prevent damage and prolong service life ... do not subject to unnecessary shock. ...
MasterPage: Left GR-DX97PAL.book Page 50 Tuesday, January 6, 2004 12:44 PM 50 EN CAUTIONS LCD Monitor ... While using the camcorder, the surface around the LCD monitor and/or the back of the LCD monitor may heat up. ... If you leave power on for a long time, the surface around the LCD monitor becomes hot. ... Recording cannot be performed properly. In such cases, use an optional cleaning cassette. Insert it and play back.
MasterPage: Ref_Heading0_Right GR-DX97PAL_09Spec.fm Page 51 Thursday, January 22, 2004 10:49 AM SPECIFICATIONS EN For General Power supply DC 11 V (Using AC Adapter) DC 7.2 V (Using battery pack) Power consumption Approx. 3.1 W (3.8W*) (LCD monitor off, viewfinder on) Approx. 3.9 W (4.6W*) (LCD monitor on, viewfinder off) * Using LED Light Dimensions (W x H x D) 52 mm x 93 mm x 94 mm (with the LCD monitor closed and the viewfinder pushed back in) Weight Approx.
TERMS MasterPage: BackCover VE_GR-DX97PAL_10IX.fm Page 52 Wednesday, January 14, 2004 9:46 AM TERMS EN A N AC Adapter ..................................................................11 Audio Dubbing .............................................................40 Navigation ............................................................. 28, 35 Night-Scope ................................................................ 32 B P Backlight Compensation ..............................................
