GD-W192 GD-W232 LCD DISPLAY MONITOR INSTRUCTIONS The illustration of the monitor above is GD-W192. KM-LMU1823J Rev.00 P/NO. GEN0002 1 and keep it handy for future reference.
European Union only Dear Customer, This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety.
SAFETY PRECAUTIONS The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
SAFETY PRECAUTIONS (cont.) POWER CONNECTION The power supply voltage rating of this product is AC 100 – 240 V (For European countries, Asian countries, and United Kingdom). The power cord attached conforms to the following power supply voltage and countries. Use only the power cord designated to ensure safety and EMC regulations of each country. • Not all types of power cords are supplied to this product.
14. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions. A. When the power cord or plug is damaged or frayed. B. If liquid has been spilled into the product. C. If the product has been exposed to rain or water. D. If the Product does not operate normally when the operating instructions are followed.
OPERATING PRECAUTIONS The LCD panel and backlight have life expectancy. Due to the basic characteristics of the LCD panel, an afterimage or uneven display may occur. It is recommended that you change images occasionally, activate the power saving function, or often turn off the power to reduce the load on the LCD panel. Continuous operations of the LCD panel may accelerate the deterioration.
UNPACKING Remove the package cover and place the product on a flat and secure surface or in the installation location. Check whether all the flowing device and accessories are included with the main system. Instructions LCD Monitor Power Cable UK 1.8 mx1 Continental 1.
CONNECTING WITH EXTERNAL DEVICE 9 8 10 1 2 3 4 5 1 2 3 4 5 DC12V 6 DC power supply input. Connect the DC plug to the provided AC adapter. AUDIO (PC) Stereo Audio input for RGB PC or HDMI When used for RGB PC, please set to HDMI AUDIO setting to "DIGITAL".
CONTROLS AND FUNCTIONS KEY BUTTON OSD Key MENU SOURCE/▼ Function Activates and exit the OSD. When the menu is not displayed → When the menu is displayed → When the menu is not displayed → AUTO/▲ When the menu is displayed → Select input source. Move the OSD menu to down side. Auto adjustment of RGB source. (Adjust size and position of screen automatically.) Move the OSD menu to upper side. VOLUME When the menu is not displayed → When the menu is displayed → Decrease the level of audio volume.
CONTROLS AND FUNCTIONS (cont.) INPUT SOURCE SELECT 1. Press the SOURCE button and then ▲/▼ button to move the source. 2. Press the ▶ button to select the source. VOLUME CONTROL 1. Sound volume can be adjust with ◀ / ▶buttons.
CONTROLS AND FUNCTIONS (cont.) PICTURE 1. Press the MENU button to access menu. 2. Use the ▲/▼ button to highlight a selection. 3. Press the ▶ button to choose an item. 4. Use the ▲/▼ button to highlight a selection. 5. Use the ◀ / ▶button to adjust the setting on a selected item. ■ CONTRAST : Adjust the picture contrast. ■ BRIGHTNESS : Adjust the picture brightness. ■ COLOR : Adjust the picture color density. (Can not use RGB input) ■ TINT : Adjust tint the picture color tint.
CONTROLS AND FUNCTIONS (cont.) SETUP 1. Press the MENU button to access menu. 2. Use the ▲/▼ button to highlight a selection. 3. Press the ▶ button to choose an item. 4. Use the ▲/▼ button to highlight a selection. 5. Use the ◀ / ▶button to adjust the setting on a selected item.
CONTROLS AND FUNCTIONS (cont.) RGB SETUP 1. Press the MENU button to access menu. 2. Use the ▲/▼ button to highlight a selection. 3. Press the ▶ button to choose an item. 4. Use the ▲/▼ button to highlight a selection. 5. Use the ◀ / ▶button to adjust the setting on a selected item. ■ H-POSITION : Adjust the horizontal picture position. ■ V-POSITION : Adjust the vertical picture position. ■ CLOCK : Eliminates stripes or flickering by adjusting. ■ PHASE : Eliminates stripes or flickering by adjusting.
SPECIFICATIONS GD-W192 Screen Size 18.5 “ 23.0 “ active matrix TFT non-glare LED back light Width : 409.8 mm Height : 230.4 mm Diagonal: 470.1 mm active matrix TFT non-glare LED back light Width : 509.1 mm Height : 286.4 mm Diagonal : 584.2 mm Resolution 1366 x 768 pixels 1920 x 1080 pixels Pixel Pitch 0.300 x 0.300 mm 0.265 x 0.
TROUBLESHOOTING Troubleshooting Troubleshooting Tip The screen doesn’t show up 1. Make sure if the power supply is connected property. 2. Turn on the power. 3. Select the correct input signal with SOURCE button. . The screen is too light or to dark Control the BRIGHTNESS The screen size is not fit for the PC signal Press the AUTO key among keys in the front. (It is used only in the PC signal) The screen color shows strange in the PC signal In the FUNCTION menu of OSD menu, Perform the AUTO-ADJUST.
DIMENSIONS Unit: mm [inch] GD-W192 GD-W232 z z z For easy understanding, pictures and illustrations are shown by being emphasized, omitt ed or composed, and may be slightly different from actual products. Design and specifications are subject to change without notice. All company names and product names mentioned herein are used for identification pur poses only, and may be the trademarks or registered trademarks of their respective com panies.