LCD DISPLAY MONITOR GD-19L1G GD-17L1G Thank you for purchasing this JVC LCD display monitor. Before using it, read and follow all instructions carefully to take full advantage of the monitor’s capabilities. (* “LCD” stands for Liquid Crystal Display.) For Customer Use: Enter below the Serial No. which is located on the rear of the cabinet. Retain this information for future reference. Model No. : GD-19L1G,GD-17L1G Serial No.
Contents Safety Precautions .................................................................................................... 3 Installation.................................................................................................................. 6 Unpacking the Monitor................................................................................................. Setup ...........................................................................................................................
Safety Precautions In order to prevent any fatal accidents caused by disoperation or mishandling the monitor, be fully aware of all the following precautions. WARNINGS To prevent fire or shock hazard, do not expose this monitor to rain or moisture. Dangerous high voltages are present inside the unit. Do not remove the back cover of the cabinet. When servicing the monitor, consult qualified service personnel. Never try to service it yourself.
– in places subject to direct sunlight, – in badly ventilated places, – in automobiles with doors closed. ● Do not cover the ventilation slots while in operation as this could obstruct the required ventilation flow. ● When dust accumulates on the screen surface, clean it with a soft cloth.
Information for Users on Disposal of Old Equipment [European Union] This symbol indicates that the electrical and electronic equipment should not be disposed as general household waste at its end-of-life. Instead, the product should be handed over to the applicable collection point for the recycling of electrical and electronic equipment for proper treatment, recovery and recycling in accordance with your national legislation.
Installation Please follow the instructions in this chapter to install your LCD Monitor. Note: Before connecting your monitor, first read through the instructions in this chapter and the safety precautions in the previous chapter.
Installation on wall This monitor can be installed on walls with Wall Mounting Unit (TS-CV10WG) made by JVC of another sales. Moreover, another wall mounting unit, in accordance with VESA standard on markets can be also used. Note: ● Please request the installation on the wall to a special engineer. When installing a wall mounting unit in the rear of the monitor , detach the stand according to the following procedure. 1. Detach the hinge cover in the rear of the monitor. Hinge cover 2.
Controls and Features 9 8 1 2 3 4 5 6 7 1 '+' and '-' buttons □ Press these buttons to adjust the sound volume. When a menu appears, use these buttons for menu operation. (see page 12). 2 ‘MENU’ button □ Use this button for menu operation. (See page 12) 3 Down ( ▼ ) button □ Use this button for menu operation. (See page 12) 4 Up ( ▲ ) button □ Use this button for menu operation. (See page 12) Starts the "AUTO ADJUST" in the PC mode when no menu appears.
To AC outlet (120 V AC, 50 Hz/60 Hz) To AC outlet (220~240 V AC, 50 Hz/60 Hz) 17 For U.S.A. and Canada 17 For Europe and Asia 17 For the United Kingdom 10 10 □ AC inlet 11 12 13 15 16 18 Connect the provided AC power cord 17 to this inlet. Then connect the AC power cord 17 to the AC outlet (120V AC or 220~240V AC, 50Hz/60Hz) 11 PC input terminal □ You can connect this monitor to your PC.
Remote control buttons and functions 1 ‘POWER ON’ button Turns the monitor on. 2 ‘POWER OFF’ button Turns the monitor off (standby). 3 ‘PC’ button Selects the PC input. ‘COMPO.’ button Selects the Component (Y/B-Y/R-Y) input. ‘Y/C’ (S-video) button Selects the Y/C (S-video) input. ‘VIDEO’ button Selects the Video input. ‘MUTING’ button Mutes the sound. ‘SELECT’ button Use this button for menu operation. (See page 12) ‘MENU’ button Use this button for menu operation.
Using Your Monitor This chapter contains information about using your LCD Monitor. Turning the Monitor On and Off Use the power ( ) button on the monitor or POWER button on the remote control to turn the monitor on and off. When the monitor is on, the Power indicator near the Power ( ) button lights in green. When no video signal is input or the input signal is out of range, the Power indicator blinks in amber.
Using the Menu This chapter contains information about how to change monitor settings for your LCD Monitor. It is designed with an menu to help you easily adjust to its optimum performance. Note: In the PC mode, do the “AUTO ADJUST” setting first, before adjusting any settings. For details, see “AUTO ADJUST” on page 17. Menu Operation 1. Display the main menu With the remote control: Press the ‘MENU’ button. ・ To exit the main menu, press the ‘MENU’ button again.
PICTURE ADJ. SHARPNESS SOFT 1 2 3 4 5 SHARP Note:If the item do not have the sub-menu, go to step 4. 4. Adjust the item or change setting of the item. With the remote control: Press the ‘+’ or ‘-’ button. With the control buttons on the front panel: Press the ‘+’ or ‘-’ button. You can change the indication time of the menu. For details, see “INDICATION TIME” on page15. ・ When no menu appears, pressing the ‘UP(▲)’ button will start “AUTO ADJUST” (page.17).
LUMINANCE menu LUMINANCE BACK LIGHT 80 CONTRAST 50 Exit BACK LIGHT: You can adjust the light output of the backlight. CONTRAST: You can adjust the contrast of the picture. Exit:You can return to the main menu. PICTURE ADJ. menu PICTURE ADJ. PHASE 50 CHROMA 50 SHARPNESS 3 Exit PHASE:You can adjust the picture hue. CHROMA:You can adjust the picture color density. SHARPNESS:You can adjust the screen sharpness. Exit:You can return to the main menu. POSITION ADJ. menu POSITION ADJ. H. POSITION 50 V.
COLOR TEMP. menu COLOR TEMP. HIGH MID. LOW USER Exit Choose one of four Color temperature settings; HIGH, MID., LOW and USER. Exit:You can return to the main menu. “USER” setting: 1. Choose "USER", and then press 'SELECT' button or ‘+’ or ‘-' button to display the sub-menu. COLOR TEMP. USER RED GREEN BLUE Exit 50 50 50 2. Press ‘Up(▲)’ or ‘Down(▼)’ button to choose “RED”, and then press 'SELECT' button or ‘+' or '-' button to display the adjusting menu. COLOR TEMP. RED < >50 3.
FUNCTION SEL. menu FUNCTION SEL. STATUS DISPLAY AUTO INPUT INFORMATION CONTROL LOCK OFF Exit STATUS DISPLAY:If "STATUS DISPLAY" is set to "AUTO", the status information will appears when changing input or turning the monitor on. If it is set to "OFF", no information appears. INPUT INFORMATION:You can confirm the current status.
Using the Monitor in the PC mode Since the inherent format of this monitor is 1280 pixels by 1024 lines, the monitor will perform best when your PC is set to a screen resolution of 1280 x 1024. If you use a lower resolution (such as 640 x 480), the image is expanded to fill the screen. Your monitor supports many common video modes, as shown in “Video Modes” on page 24. Check the manuals supplied with your PC and video adapter card to find out which modes they support.
The menu flowchart of the Video mode *The menu can not be displayed when "NO SYNC" is displayed.
ENGLISH The menu flowchart of the PC mode *The menu cannot be displayed when "NO SYNC" is displayed.
Basic Connection Example Notes: ・ Before connecting your system, make sure that all devices are turned off. ・ The illustration shows some examples of different connections. Terminal connections may differ depending on the devices. Be sure to refer to the manuals provided with the devices.
Troubleshooting Solutions to common problems related to your monitor are described here. If none of the solutions presented here solove the problem, unplug the monitor and consult a JVC-authorised dealer or service centre for assistance. A. My monitor doesn’t work. Check that the power cord is securely plugged into the monitor. Check that the monitor is turned on. Turn the monitor off and pull the plug out, then put the plug in again and turn the monitor on. B.
Specifications Model Item GD-19L1G GD-17L1G Type: LCD DISPLAY MONITOR LCD panel: 19-in(48.3cm),TFT active matrix 1280 x 1024 dot Luminance 250 cd/m (TYP.) 300 cd/m (TYP.) Contrast Ratio 1000:1 (TYP.) 500:1 (TYP.) Display colors: 16700000 colors 16200000 colors Display area( W x H ) 376.3mm(14 13/16”)x301.1mm(11 13/16”) 337.9(13 1/4”)mmx270.3mm(10 5/8”) PC Scanning frequency: (H) 31.5kHz~64kHz(Analog) (V)56Hz~70Hz (Analog) (H) 31.
Dimensions Unit:mm(inch) <Front View> <Side View> <Back View> ENGLISH VESA mounting hole VESA mounting hole <Front View> <Side View> <Back View> VESA mounting hole VESA mounting hole 23
Video Modes (Analog RGB Signal) Your LCD monitor supports the following industry-standard combinations of screen resolution and refresh rates. For optimum performance, set your PC to the screen resolution of 1280 x 1024 at 60 Hz refresh rate.