MH200SEU_00.
Filename [MH200SEU_02Safety.fm] MH200SEU_00.book Page 2 Wednesday, May 25, 2005 1:34 PM 2 EN Masterpage:Left0 SAFETY FIRST Safety Precautions The rating plate and the safety caution are on the rear of the unit. WARNING: DANGEROUS VOLTAGE INSIDE WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. CAUTION: A UNIT IS A CLASS 1 LASER PRODUCT. HOWEVER THIS UNIT USES A VISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED.
Filename [MH200SEU_02Safety.fm] Masterpage:Right+ MH200SEU_02Safety.fm Page 3 Wednesday, May 25, 2005 3:54 PM SAFETY FIRST For Italy: AIt is declared that this product, brand JVC, conforms to the Ministry Decree n. 548 of 28 Aug.’95 published in the Official Gazette of the Italian Republic n. 301 of 28 Dec.’95B The STANDBY/ON A button does not completely shut off mains power from the unit, but switches operating current on and off. ABB shows electrical power standby and ACB shows ON.
Filename [MH200SEU_03TOC.fm] Masterpage:Left0 MH200SEU_03TOC.fm Page 4 Wednesday, May 25, 2005 2:02 PM 4 EN CONTENTS SAFETY FIRST 2 Safety Precautions .........................................................................2 DISC INFORMATION 5 About Discs ....................................................................................5 INDEX 10 INSTALLING YOUR NEW UNIT 16 Basic Connections .......................................................................
Filename [MH200SEU_04DiscInfo.fm] MH200SEU_00.book Page 5 Wednesday, May 25, 2005 1:34 PM Masterpage:Right0 DISC INFORMATION About Discs Recordable/Playable Discs You can use discs with the following logos for recording and playback. DVD-RAM DVD-RW 12 cm: 4.7 GB/9.4 GB 8 cm: 1.4 GB/2.8 GB Ver. 2.0/2x speed Ver. 2.1/1x – 3x speed Ver. 2.2/5x speed 12 cm: 4.7 GB/9.4 GB Ver. 1.1/1x – 2x speed (Video mode/VR mode) Ver. 1.2/4x speed (Video mode/VR mode) DVD-R 12 cm: 4.7 GB 8 cm: 1.4 GB Ver. 2.
Filename [MH200SEU_04DiscInfo.fm] MH200SEU_00.book Page 6 Wednesday, May 25, 2005 1:34 PM 6 EN DISC INFORMATION Discs For Playback Only Unplayable Discs You can use discs with the following logos for playback only. DVD VIDEO Masterpage:Left+ Video CD/Super Video CD (example of region code indications) Audio CD CD-DA files CD-RW CD-DA/JPEG/ MP3 files CD-R CD-DA/JPEG/ MP3 files CD-ROM JPEG/MP3 files ● Playback may not be performed depending on the characteristics and condition of the disc used.
Filename [MH200SEU_04DiscInfo.fm] Masterpage:Right+ MH200SEU_00.book Page 7 Wednesday, May 25, 2005 1:34 PM DISC INFORMATION Recording Medium And Format DVD-RAM ● Recording and erasing can be performed as many times as possible on a disc. ● Editing can be performed after recording, such as deleting unwanted parts. ● While recording, it is possible not only to start playback of a programme currently being recorded, but also to watch another programme previously recorded.
Filename [MH200SEU_04DiscInfo.fm] Masterpage:Left+ MH200SEU_00.book Page 8 Wednesday, May 25, 2005 1:34 PM 8 EN DISC INFORMATION DVD VIDEO Marks Placing A Disc Sometimes marks are printed on a DVD disc and/or on its packaging to indicate information regarding the contents and functions of the disc. Check the marks indicating the contents and functions of the disc. Note, however, that in some cases a disc may not include a mark even for a function it supports.
Filename [MH200SEU_04DiscInfo.fm] MH200SEU_00.book Page 9 Wednesday, May 25, 2005 1:34 PM Masterpage:Right+ DISC INFORMATION Care And Handling Of Discs How to handle discs When handling a disc, do not touch the surface of the disc. Since discs are made of plastic, they are easily damaged. If a disc gets dirty, dusty, scratched or warped, the images and sound will not be picked up correctly, and such a disc may cause the unit to malfunction.
Filename [MH200SEU_05Name.fm] Masterpage:Left0 MH200SEU_00.book Page 10 Wednesday, May 25, 2005 1:34 PM 10 EN INDEX Front View A B D C E F G H I HDD J DVD VIDEO 1 STANDBY/ON F1 DV S-VIDEO K A B C D E F G H I Infrared Beam Receiving Window Front Display Panel A pg. 12 Disc Tray Open/Close Button (M) A pg. 8 Stop Button (o) A pg. 24, 40 Play Button (I) A pg. 24, 40 Pause Button (W) A pg. 24, 40 Record Button (R) A pg. 35, 38 HDD Button A pg.
Filename [MH200SEU_05Name.fm] Masterpage:Right+ MH200SEU_00.book Page 11 Wednesday, May 25, 2005 1:34 PM INDEX EN 11 Rear View A I B C D J A Antenna Input Connector [ANTENNA IN] A pg. 16 B Component Video Output Connectors [COMPONENT VIDEO OUT (Y/PB/PR)] A pg. 16 C S-video Output Connector [S-VIDEO] A pg. 16 D Audio Output Connectors [AUDIO OUT (RIGHT/LEFT)] A pg. 61, 69 E AV COMPU LINK Connector* * Not function with this unit.
Filename [MH200SEU_05Name.fm] Masterpage:Left+ MH200SEU_00.book Page 12 Wednesday, May 25, 2005 1:34 PM 12 EN INDEX Front Display Panel A B C D K E L A VPS/PDC Indicator A pg. 46 Appears when checking if the station being received transmits a VPS/PDC signal. Disc Type Indicator When a disc is loaded, the type of the disc is indicated. Disc Status Indicator When a disc is running, the disc marks rotate. During High-Speed Search: Rotate faster than normal playback.
Filename [MH200SEU_05Name.fm] MH200SEU_00.
Filename [MH200SEU_05Name.fm] Masterpage:Left+ MH200SEU_00.book Page 14 Wednesday, May 25, 2005 1:34 PM 14 EN INDEX On-Screen Display When ASUPERIMPOSEB is set to AAUTOB and ON SCREEN on the remote control is pressed, various operational indicators appear on the TV screen. To clear the operational indicators, press ON SCREEN twice. When pressing REC MODE (Appears for eight seconds.
Filename [MH200SEU_05Name.fm] Masterpage:Right+ MH200SEU_00.book Page 15 Wednesday, May 25, 2005 1:34 PM INDEX EN 15 On-Screen Display (DV Dubbing) When capturing images from the external DV equipment HDD A B C D E F G H I J K 0:00 1:00 FR360 00:00:00. 00 12bit DV JVC 2:00 DV GR-DV3500 00:00:00.
Filename [MH200SEU_05Name.fm] Masterpage:Left0 MH200SEU_00.
Filename [MH200SEU_05Name.fm] Masterpage:Right0 MH200SEU_00.book Page 17 Wednesday, May 25, 2005 1:34 PM INITIAL SETTINGS 3 Auto Set Up Auto Channel Set/Auto Clock Set/Auto Guide Programme Number Set Press selection keys to select the language of your choice, then press ENTER. The AUTO SET/ T-V LINK display appears on the TV screen. * If you live in Belgium (BELGIUM) or Switzerland (SUISSE), you also need to select your language.
Filename [MH200SEU_05Name.fm] Masterpage:Left+ MH200SEU_00.book Page 18 Wednesday, May 25, 2005 1:34 PM 18 EN INITIAL SETTINGS Preset Download Auto Channel Set by Downloading from TV/Auto Clock Set/Auto Guide Programme Number Set ATTENTION: You can use this function only with a TV offering T-V Link, etc.* Be sure to use a fully-wired 21-pin SCART cable. * Compatible with TVs offering T-V Link, EasyLink, Megalogic, SMARTLINK, Q-Link or DATA LOGIC via a fully-wired 21-pin SCART cable.
Filename [MH200SEU_05Name.fm] Masterpage:Right+ MH200SEU_00.book Page 19 Wednesday, May 25, 2005 1:34 PM INITIAL SETTINGS Results Of Auto Set Up/Preset Download Appearing On The Front Display Panel If both Auto Channel Set and Auto Clock Set have been performed successfully, the correct current time is displayed. Turn on the TV and select its AV mode, then make sure that all necessary stations have been stored in the unit’s memory by using the PR +/– button(s). ● If station names (ID – A pg.
Filename [MH200SEU_05Name.fm] Masterpage:Left+ MH200SEU_00.book Page 20 Wednesday, May 25, 2005 1:34 PM 20 EN INITIAL SETTINGS On-screen Language Set Language This unit offers you the choice to view on-screen messages in 10 different languages. ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. CABLE/SAT TV 1 2 Press SET UP to access the Main Menu screen. 3 Press selection keys to select ADISPLAY SETB, then press G.
Filename [MH200SEU_05Name.fm] Masterpage:Right+ MH200SEU_00.book Page 21 Wednesday, May 25, 2005 1:34 PM INITIAL SETTINGS Monitor Set EN 1 Press SET UP to access the Main Menu screen. 2 Press selection keys to select AFUNCTION SET UPB, then press G. 3 Press selection keys to select AVIDEO IN/OUTB, then press G. 21 ● You cannot set the monitor type during recording or playback.
Filename [MH200SEU_05Name.fm] Masterpage:Left0 MH200SEU_00.book Page 22 Wednesday, May 25, 2005 1:34 PM 22 EN SAT CONTROL SET Satellite Receiver Control Setting Satellite receiver The following procedure is required if you receive satellite channels through a satellite receiver. Approximately 20 seconds before the SHOWVIEW timer programming (A pg. 45) or Manual Timer programming (A pg.
Filename [MH200SEU_05Name.fm] MH200SEU_00.book Page 23 Wednesday, May 25, 2005 1:34 PM Masterpage:Right+ SAT CONTROL SET EN 23 11 Check the result of the test. If the satellite receiver’s channel number has been changed to the same one as you set in step 9 Press selection keys to select AYESB, then press ENTER to finish the Sat Control Set mode. If the satellite receiver’s channel number has not been changed correctly Press selection keys to select ANOB, then press ENTER.
Filename [MH200SEU_06DVD Operation.fm] Masterpage:Left0 MH200SEU_00.book Page 24 Wednesday, May 25, 2005 1:34 PM 24 EN BASIC OPERATIONS ON DVD DECK To play back an MP3/JPEG disc, see APlayback With MP3/WMA/ JPEG NavigationB (A pg. 57). Basic Playback 1 Load a disc. ● For details, refer to APlacing A DiscB (A pg. 8). ● Pressing I also closes the disc tray. ● Playback begins automatically if an auto-playback DVD disc is loaded. ● Turn on the unit. ● Turn on the TV and select the AV mode.
Filename [MH200SEU_06DVD Operation.fm] Masterpage:Right+ MH200SEU_00.book Page 25 Wednesday, May 25, 2005 1:34 PM BASIC OPERATIONS ON DVD DECK 25 Locating The Start Point Of The Item Or Skip The Item Playback Features ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. ● Press DVD so that the DVD lamp lights up on the unit. CABLE/SAT TV x EN Press S or T during playback.
Filename [MH200SEU_06DVD Operation.fm] Masterpage:Left+ MH200SEU_00.book Page 26 Wednesday, May 25, 2005 1:34 PM 26 EN BASIC OPERATIONS ON DVD DECK Slow Motion 1 2 Resume Function Press W to pause during playback. Press SLOW – (O) or SLOW + (N) for 2 or more seconds. ● Each press of SLOW – (O) or SLOW + (N) increases the slow motion speed for each direction. ● Slow motion for reverse direction cannot be performed with Video CD/SVCD discs.
Filename [MH200SEU_06DVD Operation.fm] Masterpage:Right+ MH200SEU_00.book Page 27 Wednesday, May 25, 2005 1:34 PM BASIC OPERATIONS ON DVD DECK CABLE/SAT TV EN 27 Checking The Time Information DVD DVD You can check time information of a disc on the front display panel and the TV screen.
Filename [MH200SEU_06DVD Operation.fm] Masterpage:Left+ MH200SEU_00.book Page 28 Wednesday, May 25, 2005 1:34 PM 28 EN BASIC OPERATIONS ON DVD DECK Subtitle Selection Audio Language/Sound Selection Some DVD VIDEO discs contain more than one subtitle language, from among which you can choose the desired subtitle language. AhB appears on the TV screen at the beginning of the part where more than one subtitle language are recorded. Some DVD VIDEO discs contain the multiple audio language or sound.
Filename [MH200SEU_06DVD Operation.fm] Masterpage:Right+ MH200SEU_00.book Page 29 Wednesday, May 25, 2005 1:34 PM BASIC OPERATIONS ON DVD DECK A B C D E F Using The On-screen Bar The on-screen bar allows you to control various playback functions. Some of the functions operated on Navigation Menu can be controlled on the On-screen bar. ATTENTION: The on-screen bar can also be used for the HDD deck. Be sure to clear Library Database Navigation screen by pressing NAVIGATION.
Filename [MH200SEU_06DVD Operation.fm] Masterpage:Left+ MH200SEU_00.book Page 30 Wednesday, May 25, 2005 1:34 PM 30 EN BASIC OPERATIONS ON DVD DECK Repeat Playback A-B Repeat Playback You can repeat playback as you like according to the type of disc. You can repeat the desired part. 1 2 Press ON SCREEN twice to access the on-screen bar. During playback Press selection keys to select AxB, then press ENTER. The pop-up window appears under the selected item.
Filename [MH200SEU_06DVD Operation.fm] Masterpage:Right+ MH200SEU_00.book Page 31 Wednesday, May 25, 2005 1:34 PM BASIC OPERATIONS ON DVD DECK Locating The Beginning Of A Desired Selection EN 31 CABLE/SAT TV DVD You can locate the beginning of a title, chapter, group or track. 0-9 During playback or while stopped 1 2 3 Press ON SCREEN twice to access the on-screen bar. CANCEL Press selection keys to select A9B, then press ENTER. Press selection keys to select the desired item, then press ENTER.
Filename [MH200SEU_06DVD Operation.fm] Masterpage:Left+ MH200SEU_00.book Page 32 Wednesday, May 25, 2005 1:34 PM 32 EN BASIC OPERATIONS ON DVD DECK Simulated Surround Effect Setting The Progressive Mode It is possible to get a simulated surround effect from your stereo system. You can enjoy the virtual surround sound with your 2 channel stereo system. You can obtain optimal picture quality by selecting whether the content on the disc is processed by field (video source) or by frame (film source).
Filename [MH200SEU_06DVD Operation.fm] Masterpage:Right+ MH200SEU_00.book Page 33 Wednesday, May 25, 2005 1:34 PM BASIC OPERATIONS ON DVD DECK EN Programme Playback Random Playback You can programme up to 30 tracks (Video CD/SVCD or Audio CD) to play back in the desired order. You can play back all the tracks on the disc in random order. While stopped 1 2 1 2 Press ON SCREEN twice to access the on-screen bar. Press ON SCREEN twice to access the on-screen bar.
Filename [MH200SEU_06DVD Operation.fm] Masterpage:Left+ MH200SEU_00.book Page 34 Wednesday, May 25, 2005 1:34 PM 34 EN BASIC OPERATIONS ON DVD DECK 6 Press the number keys to enter your desired four-digit number, then press ENTER. ● If you made a mistake, enter a correct number again. Parental Lock 7 This function restricts playback of DVD VIDEO discs which contain violent (and other) scenes according to the level set by the user.
Filename [MH200SEU_06DVD Operation.fm] Masterpage:Right+ MH200SEU_00.book Page 35 Wednesday, May 25, 2005 1:34 PM BASIC OPERATIONS ON DVD DECK 7 Basic Recording 35 Press o twice to stop recording. ● It takes about 10 seconds to end the writing session when you stop recording. ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. ATTENTION: It is not possible to record programmes on a DVD-R disc which has already been finalised.
Filename [MH200SEU_06DVD Operation.fm] Masterpage:Left+ MH200SEU_00.book Page 36 Wednesday, May 25, 2005 1:34 PM 36 EN BASIC OPERATIONS ON DVD DECK Instant Timer Recording (ITR) Recording Features This easy method lets you record for 30 minutes to 6 hours (selectable in 30 minutes interval), and shuts the unit off after recording is finished. ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD.
Filename [MH200SEU_06DVD Operation.fm] MH200SEU_00.book Page 37 Wednesday, May 25, 2005 1:34 PM Masterpage:Right+ BASIC OPERATIONS ON DVD DECK EN 37 Free Rate Function Receiving Stereo And Bilingual Programmes To record the entire programme, the unit automatically sets the appropriate recording mode depending on the combination of the total time of the programme to be recorded and either the remaining disc space or the specified recording time (from 60 minutes to 480 minutes).
Filename [MH200SEU_07HDD Operation.fm] Masterpage:Left0 MH200SEU_00.book Page 38 Wednesday, May 25, 2005 1:34 PM 38 EN BASIC OPERATIONS ON HDD DECK Pause recording on HDD deck It is not possible to pause recording. Pressing W initiates Live Memory Playback. However, it is still possible to pause recording only when recording the channels of external sources (AL-1B, AL-2B, AF-1B, and ADVB). While holding R, press W on the remote. To resume recording, while holding R, press I on the remote.
Filename [MH200SEU_07HDD Operation.fm] Masterpage:Right+ MH200SEU_00.book Page 39 Wednesday, May 25, 2005 1:34 PM BASIC OPERATIONS ON HDD DECK 39 Watch Another Programme While Recording On The Unit Recording Features EN While recording is going on, you can watch another programme on the TV by using the TV’s tuner. ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. ● Press HDD on the remote so that the HDD lamp lights up on the unit.
Filename [MH200SEU_07HDD Operation.fm] Masterpage:Left+ MH200SEU_00.book Page 40 Wednesday, May 25, 2005 1:34 PM 40 EN BASIC OPERATIONS ON HDD DECK Basic Playback Playback Features ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. ● Press HDD so that the HDD lamp lights up on the unit.
Filename [MH200SEU_07HDD Operation.fm] Masterpage:Right+ MH200SEU_00.book Page 41 Wednesday, May 25, 2005 1:34 PM BASIC OPERATIONS ON HDD DECK EN 41 One Touch Replay Marking Positions To Play Back Again Later You can move back the playback position slightly. Press w. ● Each press skips back for approximately 7 seconds and resumes playback. ● Pressing while paused skips back for approximately 7 seconds and resumes pause.
Filename [MH200SEU_08Live Memory.fm] Masterpage:Left0 MH200SEU_00.book Page 42 Wednesday, May 25, 2005 1:34 PM 42 EN LIVE MEMORY PLAYBACK Recording/playback Status Display Live Memory Playback CABLE/SAT TV DVD ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. ● Press HDD or DVD to select the HDD or DVD deck.
Filename [MH200SEU_08Live Memory.fm] MH200SEU_00.book Page 43 Wednesday, May 25, 2005 1:34 PM Masterpage:Right+ LIVE MEMORY PLAYBACK Buttons To Be Used During Live Memory Playback ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. ● Press HDD or DVD to select the desired deck for Live Memory Playback. CABLE/SAT TV HDD DVD DVD A B C D E G F H K L I J M A LIVE Returns to on air programme screen.
Filename [MH200SEU_08Live Memory.fm] Masterpage:Left+ MH200SEU_00.book Page 44 Wednesday, May 25, 2005 1:34 PM 44 EN LIVE MEMORY PLAYBACK Temporary recording for Live Memory (HDD deck only) This unit automatically records the channel being received, within the specified range of time, to the reserved space on the hard disc. The time range can be set for 30 minutes, 1 hour, and 3 hours. (A pg.
Filename [MH200SEU_09Timer Recording.fm] Masterpage:Right0 MH200SEU_00.book Page 45 Wednesday, May 25, 2005 1:34 PM TIMER RECORDING SHOWVIEW Timer Programming You can programme this unit to timer record as many as 16 programmes. With the SHOWVIEW system, timer programming is greatly simplified because each TV programme has a corresponding code number which your unit is able to recognise. You can use the remote control to enter the SHOWVIEW number.
Filename [MH200SEU_09Timer Recording.fm] Masterpage:Left+ MH200SEU_00.book Page 46 Wednesday, May 25, 2005 1:34 PM 46 EN TIMER RECORDING Weekly/Daily Recording VPS/PDC Recording You can record programmes with one of the following weekly/daily timer settings. For the HDD deck When you select a mode other than ONCE, the space on the hard disk drive is saved for new recordings by overwriting previous recordings.
Filename [MH200SEU_09Timer Recording.fm] Masterpage:Right+ MH200SEU_00.book Page 47 Wednesday, May 25, 2005 1:34 PM TIMER RECORDING Manual Timer Programming You can programme this unit to timer record as many as 16 programmes. If you do not know the SHOWVIEW number for the programme you wish to record, use the following procedure to set your unit to timer record the programme. TV AUX Selection Keys FGDE 1 2 3 Load a recordable disc if recording to DVD.
Filename [MH200SEU_09Timer Recording.fm] Masterpage:Left+ MH200SEU_00.book Page 48 Wednesday, May 25, 2005 1:34 PM 48 EN TIMER RECORDING CABLE/SAT TV DVD Check Programmes To check the whole list of programmes 1 Press PROGRAMME to access the programme top screen. PROGRAMME NAVIGATION TIMER PROGRAMME 2 PROGRAMME ENTER Selection Keys FGDE CALENDAR PR.
Filename [MH200SEU_09Timer Recording.fm] Masterpage:Right+ MH200SEU_00.book Page 49 Wednesday, May 25, 2005 1:34 PM TIMER RECORDING Automatic Satellite Programme Recording (HDD Deck Only) EN 49 ● Make sure the satellite receiver is connected to the unit’s [L-2 IN/DECODER] connector. ● Programme the timer on the satellite receiver. ● Slide the TV/CABLE/SAT/DVD switch to DVD.
Filename [MH200SEU_10Navigation.fm] MH200SEU_00.book Page 50 Wednesday, May 25, 2005 1:34 PM 50 EN NAVIGATION Using Library Database Navigation system, you can easily modify registered information, edit the title or play list, as well as search for the beginning of each title. Library Database Navigation The Library Database Navigation enables you to search and select the desired titles recorded on the HDD deck and the DVD deck very easily. You can record up to 99 titles on a disc.
Filename [MH200SEU_10Navigation.fm] Masterpage:Right+ MH200SEU_00.book Page 51 Wednesday, May 25, 2005 1:34 PM NAVIGATION Scan For Beginning Of Title CABLE/SAT TV DVD DVD MEMO ENTER NAVIGATION Selection Keys FGDE 4 8 9 ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. ● Press HDD or DVD to choose the corresponding deck. ● Load a DVD disc to modify. ATTENTION: ● It is not possible to modify discs recorded on DVD units from other manufacturers.
Filename [MH200SEU_10Navigation.fm] Masterpage:Left+ MH200SEU_00.book Page 52 Wednesday, May 25, 2005 1:34 PM 52 EN NAVIGATION Modify Title Name Protect Title (DVD-RAM & DVD-RW (VR mode) only) 1 Perform steps 1 – 4 of AModify IndexB (A pg. 51) before continuing. 2 3 Press selection keys to select ANAMEB, then press ENTER. 1 Press selection keys to select AALPHABETB, ASYMBOL1B or ASYMBOL2B. Perform steps 1 – 2 of AModify IndexB (A pg. 51) before continuing.
Filename [MH200SEU_10Navigation.fm] Masterpage:Right+ MH200SEU_00.book Page 53 Wednesday, May 25, 2005 1:34 PM NAVIGATION Delete Unwanted Part Of The Title (DVD-RAM & DVD-RW (VR mode) only) 2 3 1 Perform steps 1 – 2 of AModify IndexB (A pg. 51) before continuing. Press selection keys to select ADEL SCENB, then press ENTER. Press selection keys to select a title whose unwanted part you want to delete, then press ENTER. 4 Press I to start playback.
Filename [MH200SEU_10Navigation.fm] Masterpage:Left+ MH200SEU_00.book Page 54 Wednesday, May 25, 2005 1:34 PM 54 EN NAVIGATION Create Play List Edit Play List Information 1 2 ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. ● Press HDD or DVD to choose the corresponding deck. ● Load a DVD disc to modify. ATTENTION: ● It is not possible to modify discs recorded on DVD units from other manufacturers.
Filename [MH200SEU_10Navigation.fm] Masterpage:Right+ MH200SEU_00.book Page 55 Wednesday, May 25, 2005 1:34 PM NAVIGATION Add scenes Delete Play List 1 Perform steps 1 – 5 of AEdit ScenesB (A pg. 54) before continuing. 2 1 2 Press selection keys to select ASEL. TITLEB, then press ENTER. 3 Perform steps 4 – 11 in ACreate Play ListB (A pg. 54). Move Scenes 1 Perform steps 1 – 5 of AEdit ScenesB (A pg. 54) before continuing. 2 3 Press selection keys to select AMOVEB, then press ENTER.
Filename [MH200SEU_10Navigation.fm] Masterpage:Left+ MH200SEU_00.book Page 56 Wednesday, May 25, 2005 1:34 PM 56 EN NAVIGATION Scan For Title From Library Edit Library Information 1 Press NAVIGATION. The Library Database Navigation screen appears. 2 Title information can be registered in the unit’s memory for up to 600 DVD discs, 2,000 titles. It is helpful when finding a desired title (or play list) by sorting according to the sort options registered during (or after) recording.
Filename [MH200SEU_10Navigation.fm] Masterpage:Right+ MH200SEU_00.book Page 57 Wednesday, May 25, 2005 1:34 PM NAVIGATION Playback With MP3/WMA/JPEG Navigation This unit can play back discs that MP3/WMA sound files and JPEG image files taken with digital still cameras or other devices are recorded. The MP3/WMA/JPEG Navigation enables you to search and select the desired files recorded on CD-R/RW or CD-ROM discs very easily. ● Turn on the TV and select the AV mode.
Filename [MH200SEU_11Editing.fm] Masterpage:Left0 MH200SEU_00.book Page 58 Wednesday, May 25, 2005 1:34 PM 58 EN EDITING 3 Dubbing Press selection keys to select AHDDNDVDB, then press ENTER. ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. THEN PRESS [ENTER] DVD -> HDD DVD -> DV DV -> HDD DV -> DVD TO EXIT DVD MARK ENTER Selection Keys FGDE I W ON SCREEN NOTES: ● It is not possible to dub copy-protected contents.
Filename [MH200SEU_11Editing.fm] Masterpage:Right+ MH200SEU_00.book Page 59 Wednesday, May 25, 2005 1:34 PM EDITING Manual Dubbing (From HDD To DVD) It is possible to perform dubbing in the desired transfer rate. 1 2 3 Load a recordable disc. Press DUBBING to access the Dubbing Menu screen. Press selection keys to select AHDDNDVDB, then press ENTER. 4 5 Press selection keys to select AMANUALB, then press ENTER. 6 Press selection keys to select AREC MODEB, then press ENTER.
Filename [MH200SEU_11Editing.fm] Masterpage:Left+ MH200SEU_00.book Page 60 Wednesday, May 25, 2005 1:34 PM 60 EN EDITING The following on-screen display for DV dubbing appears when ON SCREEN is pressed while the channel has been set to ADVB. DV Dubbing You can dub programmes from a camcorder or DV equipment connected to the unit with a DV cable. The unit’s remote control allows you the limited control of the connected camcorder or DV equipment functions during dubbing.
Filename [MH200SEU_11Editing.fm] Masterpage:Right+ MH200SEU_00.book Page 61 Wednesday, May 25, 2005 1:34 PM EDITING 9 Press selection keys to select , then press ENTER. The dubbing starts. ● Playback on the external DV equipment and recording on the unit should start simultaneously. ● To pause dubbing, press selection keys to select , then press ENTER. Both the unit and the external DV equipment pause dubbing. Pressing W on the unit also works the same way.
Filename [MH200SEU_11Editing.fm] Masterpage:Left+ MH200SEU_00.book Page 62 Wednesday, May 25, 2005 1:34 PM 62 EN EDITING Edit From A Camcorder ● Slide the TV/CABLE/SAT/DVD switch to DVD. You can use a camcorder as the source player and your unit as the recording deck. A If the camcorder has no S-VIDEO output connector: Recorder To [VIDEO/AUDIO ((MONO) L/R)] input 1 Make connections.
Filename [MH200SEU_11Editing.fm] Masterpage:Right+ MH200SEU_00.book Page 63 Wednesday, May 25, 2005 1:34 PM EDITING Edit To Or From Another Recorder You can use your unit as the source player or as the recording deck. NOTES: ● When using another recorder as the recording deck, refer to its instruction manual. ● It is not possible to dub copy-protected contents. An error message will appear on the TV screen.
Filename [MH200SEU_11Editing.fm] Masterpage:Left+ MH200SEU_00.book Page 64 Wednesday, May 25, 2005 1:34 PM 64 EN EDITING * The boldface settings below indicate the settings at your purchase. Output/Input Set 8 L-1 OUTPUT ^ SCART VIDEO / SCART S-VIDEO / SCART RGB / COMPONENT SCART VIDEO: ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. If a connected appliance’s input is compatible only with regular video signals, set to ASCART VIDEOB.
Filename [MH200SEU_11Editing.fm] Masterpage:Right+ MH200SEU_00.book Page 65 Wednesday, May 25, 2005 1:34 PM EDITING EN L-2 Select Setting F-1 Input Setting Set AL-2 SELECTB to the appropriate mode depending on the type of appliance connected to the unit’s [L-2 IN/DECODER] connector. Set AF-1 INPUTB to the appropriate mode depending on the connector (VIDEO or S-VIDEO) being used on the front panel. 1 Perform steps 1 and 2 of AL-1 Output And L-1 Input SettingB (A pg. 64).
Filename [MH200SEU_11Editing.fm] Masterpage:Left0 MH200SEU_00.book Page 66 Wednesday, May 25, 2005 1:34 PM 66 EN REMOTE CONTROL Remote Control Functions CABLE/SAT TV TV AV/VIDEO 1 Remote Control 1/2/3/4 Code Switching The remote control is capable of controlling four JVC video units independently. Each of the units can respond to one of the four codes (1, 2, 3 or 4). The remote control is preset to send code 3 signals because your unit is initially set to respond to code 3 signals.
Filename [MH200SEU_11Editing.fm] Masterpage:Right+ MH200SEU_00.
Filename [MH200SEU_11Editing.fm] Masterpage:Left0 MH200SEU_00.book Page 68 Wednesday, May 25, 2005 1:34 PM 68 EN SYSTEM CONNECTIONS Connecting To A Satellite Receiver Simple Connections This is an example of a simple connection if your TV has one 21-pin AV input (SCART) connector. Connect the satellite receiver to the [L-2 IN/DECODER] connector, then connect the [L-1 IN/OUT] connector to the TV’s connector. NOTES: ● Set AL-2 SELECTB to AVIDEOB or AS-VIDEOB. (A pg.
Filename [MH200SEU_11Editing.fm] Masterpage:Right+ MH200SEU_00.book Page 69 Wednesday, May 25, 2005 1:34 PM SYSTEM CONNECTIONS Connecting To A Dolby Digital Decoder Or An Amplifier With Built-in DTS These instructions enable you to connect your unit to a Dolby Digital Decoder or an amplifier with built-in DTS.
Filename [MH200SEU_12Subsidiary.fm] Masterpage:Left0 MH200SEU_00.book Page 70 Wednesday, May 25, 2005 1:34 PM 70 EN SUBSIDIARY SETTINGS 6 Mode Set Press SET UP to complete the setting. * The boldface settings below indicate the settings at your purchase. AUDIO OUTPUT ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD.
Filename [MH200SEU_12Subsidiary.fm] Masterpage:Right+ MH200SEU_00.book Page 71 Wednesday, May 25, 2005 1:34 PM SUBSIDIARY SETTINGS EN DISC PLAY SET UP REC/PLAY SET UP 8 RESUME ^ OFF / ON / DISC RESUME 8 XP MODE REC AUDIO ^ DOLBY DIGITAL / LINEAR PCM When this function is set to AONB or ADISC RESUMEB, you can use the resume function. (A pg. 26) OFF: You cannot use the resume function. ON: You can start playback from the resume point of the placed disc.
Filename [MH200SEU_12Subsidiary.fm] Masterpage:Left+ MH200SEU_00.book Page 72 Wednesday, May 25, 2005 1:34 PM 72 EN SUBSIDIARY SETTINGS DISPLAY SET 8 SUPERIMPOSE ^ OFF / AUTO When this function is set to AAUTOB, various operational indicators appear on the TV screen. Messages appear in the selected language. (A pg. 20) OFF: To turn off superimposed indications. AUTO: To superimpose operational indications for approximately five seconds just after the corresponding operation.
Filename [MH200SEU_12Subsidiary.fm] Masterpage:Right+ MH200SEU_00.book Page 73 Wednesday, May 25, 2005 1:34 PM SUBSIDIARY SETTINGS IMPORTANT: Normally, Auto Set Up (A pg. 17), Preset Download (A pg. 18) or Auto Channel Set (A pg. 74) sets the Guide Programme numbers automatically. You need to set the Guide Programme numbers manually only in the following cases.
Filename [MH200SEU_12Subsidiary.fm] Masterpage:Left+ MH200SEU_00.book Page 74 Wednesday, May 25, 2005 1:34 PM 74 EN SUBSIDIARY SETTINGS 7 Tuner Set Press ENTER twice. ● When you have Your unit needs to memorise all necessary stations in channel positions in order to record TV programmes. Auto Channel Set automatically assigns all receivable stations in your area to call them up by using the PR +/– buttons without going through any vacant channels. ● Turn on the unit.
Filename [MH200SEU_12Subsidiary.fm] Masterpage:Right+ MH200SEU_00.book Page 75 Wednesday, May 25, 2005 1:34 PM SUBSIDIARY SETTINGS EN 75 Manual Channel Set Delete A Channel Store channels that were not stored during Auto Set Up (A pg. 17), Preset Download (A pg. 18) or Auto Channel Set (A pg. 74). 1 2 3 Perform steps 1 – 5 of AManual Channel SetB (A pg. 75). 4 Press SET UP or RETURN to close the Confirmation screen. 1 2 Press SET UP to access the Main Menu screen.
Filename [MH200SEU_12Subsidiary.fm] Masterpage:Left+ MH200SEU_00.book Page 76 Wednesday, May 25, 2005 1:34 PM 76 EN SUBSIDIARY SETTINGS When Receiving A Scrambled Broadcast 1 2 3 Set AL-2 SELECTB to ADECODERB. (A pg. 65) Perform steps 1 – 5 of AManual Channel SetB (A pg. 75). Press selection keys to select the channel position broadcasting scrambled programmes, then press ENTER. The Confirmation screen appears. 4 Press selection keys to select ADECODERB, then press ENTER.
Filename [MH200SEU_12Subsidiary.fm] Masterpage:Right+ MH200SEU_00.book Page 77 Wednesday, May 25, 2005 1:34 PM SUBSIDIARY SETTINGS EN 77 5 Clock Set IMPORTANT: If you performed Auto Set Up (A pg. 17) or Preset Download (A pg. 18), without ever having set the clock previously, the unit’s built-in clock is also set automatically. Perform the following steps only if ^ ^ Auto Clock Set has not been performed correctly by Auto Set Up or Preset Download. OR ^ you want to change Just Clock setting.
Filename [MH200SEU_12Subsidiary.fm] Masterpage:Left+ MH200SEU_00.book Page 78 Wednesday, May 25, 2005 1:34 PM 78 EN SUBSIDIARY SETTINGS Format A Disc (DVD Deck Only) Some DVD-RAM/RW discs are unformatted. Format the disc when you use an unformatted disc or you want to delete all recordings and data on the disc. ATTENTION: ● When a disc is formatted, all recordings and data are erased. It is impossible to restore them. ● Never turn off the unit or disconnect the mains power cord while ANOW FORMATTING...
Filename [MH200SEU_12Subsidiary.fm] Masterpage:Right+ MH200SEU_00.book Page 79 Wednesday, May 25, 2005 1:34 PM SUBSIDIARY SETTINGS Finalise A Disc (DVD Deck Only) EN 79 Finalise A DVD-R/RW Disc 1 Perform steps 1 to 3 of AFormat A DVD-RAM DiscB (A pg. 78) before continuing. 2 Finalising DVD-R/RW discs recorded on this unit makes it possible for the discs to be played back on other DVD players.
Filename [MH200SEU_12Subsidiary.fm] MH200SEU_00.book Page 80 Wednesday, May 25, 2005 1:34 PM 80 EN Masterpage:Left+ SUBSIDIARY SETTINGS Help Function Tray Lock (DVD Deck Only) Use this function if you encounter problems while operating this unit. ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. You can lock the disc tray to prohibit the unwanted disc ejection by children. ● Turn off the unit.
Filename [MH200SEU_12Subsidiary.fm] Masterpage:Right0 MH200SEU_00.book Page 81 Wednesday, May 25, 2005 1:34 PM TROUBLESHOOTING Before requesting service for a problem, use this chart and see if you can solve the trouble yourself. Small problems are often easily solved, and this can save you the trouble of sending your unit off for repair. Initialising (DVD Deck Only) Malfunction occurs on the unit. N Press A to turn off the unit, press and hold A, then press o for two seconds or more.
Filename [MH200SEU_12Subsidiary.fm] Masterpage:Left+ MH200SEU_00.book Page 82 Wednesday, May 25, 2005 1:34 PM 82 EN TROUBLESHOOTING Recording (HDD Deck) TV broadcasts cannot be recorded. ● AL-1B, AL-2B or AF-1B has been selected as the input mode. N Set to the desired channel. Camcorder recording is not possible. Other Problems The image of the TV broadcast appears distorted on the TV screen.
Filename [MH200SEU_12Subsidiary.fm] MH200SEU_00.book Page 83 Wednesday, May 25, 2005 1:34 PM Masterpage:Right+ TROUBLESHOOTING On-screen Message DISC NOT REGISTERED IN THE LIBRARY REGISTER DISC? ● A disc that is not registered in the library has been inserted. Register the disc as necessary. (A pg. 56) INSERT DISC XXXX ● Appears when a title that has been selected in the library is not contained in the loaded disc.
Filename [MH200SEU_12Subsidiary.fm] MH200SEU_00.book Page 84 Wednesday, May 25, 2005 1:34 PM 84 EN Masterpage:Left0 SPECIFICATIONS GENERAL VIDEO/AUDIO (HDD Deck) Power requirement AC 220 V - 240 VH, 50 Hz/60 Hz Video recording compression system MPEG 2 (VBR) Power consumption Power on: 37 W Power off: 19.
Filename [MH200SEU_12Subsidiary.fm] Masterpage:Right0 MH200SEU_00.
Filename [MH200SEU_12Subsidiary.fm] Masterpage:Left+ MH200SEU_00.
Filename [MH200SEU_12Subsidiary.fm] Masterpage:Right+ MH200SEU_00.
Filename [MH200SEU_12Subsidiary.fm] Masterpage:Left+ 3Column MH200SEU_00.book Page 88 Wednesday, May 25, 2005 1:34 PM 88 EN APPENDIX TV Station And ID List The AIDB abbreviation is what is shown on-screen in lieu of the station name. The AIDB abbreviation is listed in the Confirmation screen and is displayed on the TV screen when the unit is tuned to a different station.
Filename [MH200SEU_13IX.fm] Masterpage:Right0 MH200SEU_00.book Page 89 Wednesday, May 25, 2005 1:34 PM LIST OF TERMS EN 89 A P A-B Repeat Playback ................................................ 30 Adjusting The Picture Quality ..................................... 32 Angle Selection ........................................................ 27 Audio Channel Selection ........................................... 28 Audio Language/Sound Selection ............................... 28 Auto Channel Set .....
Filename [MH200SEU_13IX.fm] MH200SEU_00.
Filename [MH200SEU_13IX.fm] MH200SEU_00.
MH200SEU_00.
