JVC //////////' DVD PLAYER XV-S5OOBK/XV-S502SL 7 .%'6 1 , Additionalinformation For Customer Use: Enter below the Model No. and Serial No. which are located on the rear, bottom or side of the cabinet. Retain this information for future reference. Model No.
Warnings, Cautions and Others Mises en garde, precautions et indications diverses CAUTION To reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose this appliance to rain or moisture. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Table of Contents Page 2 Supplied Notes accessories on handling .......................................................... 2 .............................................................. 3 Important cautions ................................................................... Safety precautions ................................................................... About discs .........................................................................
Supplied accessories • Audio/video cable (Yellow/White/Red) (x 1) • R6P(SUM-3)/AA(15F) • Instruction • Component video cable (Red/Green/Blue) • Remote Control battery (x 2) manual (x 1) (x 1) Unit (x 1) • AC power cord (x 1) • AC power plug adaptor (for PX model only) (x 1)
Introduction Notes on handling Installation of the unit • Select a place which is level, dry and neither too hot nor too cold (between 5°C and 35°C, 41°F and 95°F). • Leave sufficient distance between the unit and the TV. • Do not use the unit in a place subject to vibrations. Power cord • Do not handle the power cord with wet hands! • A small amount of power (1.3 W, for PX model:2.5W) is always consumed while the power cord is connected to the wall outlet.
Introduction About discs Playable and non-playable DVD VIDEO disc types are as follows: SVCD Video CD recorded on discs as Audio CD VIdeoCD The DVD Logo is a trademark. • CD-R and CD-RW discs recorded with the Audio CD, Video CD, SVCD, MP3 or JPEG format can be played back, though some may not be played back because of the disc characteristics or recording condition. Note that unfinalized discs cannot be played back.
Introduction (For DVD VIDEO) How to handle discs A DVD VIDEO disc is comprised of "titles" and each title may be divided into some "chapters". For example, if a DVD VIDEO disc contains some movies, each movie may have its own title number, and each movie may be divided into some chapters. In a DVD VIDEO KARAOKE disc, each song usually has its own title number and does not have chapters. When handling a disc, do not touch the surface of the disc. Since discs are made of plastic, they are easily damaged.
Connections *Before using the unit, you have to connect the unit to a TV and/or amplifier. • Do not connect the AC power cord until all other connections have been made. • Connect VIDEO OUT of the unit directly to the video input of your TV. Connecting VIDEO OUT of the unit to a TV via a VCR may cause a monitor problem when playing back a copy-protected disc. You may also have a monitor problem when connecting the unit to an integrated W/Video system.
Getting Connection to a TV equipped with component You can enjoy high picture quality by connecting IN jacks of your -IV with the video cables. The unit Green_ jacks the unit's COMPONENT _ _Red Component started VIDEO OUT jacks to the COMPONENT VIDEO videocable(supplied) eOtp'teScanmoOese,ector Audio cable (not supplied) • Connect "Y" to "Y", "Ps" to "PB"(CB), "PR" to "PR"(CR) correctly.
Getting started To make the Progressive scan mode selection active from the remote control unit The unit supports the Progressive scan system as well as the conventional Interlace scan system. If your television or monitor supports the progressive video input, you can enjoy a high quality picture by making the Progressive scan mode active. 480p If you want to select the scan mode between the interlace and progressive modes depending on the unit.
Getting started You can enhance the sound quality by connecting either of the unit's DIGITAL OUT jacks to the digital input of an amplifier, MD, etc. by using an optical or a coaxal digital cable (optional). The digital audio signal from a disc is directly transferred. If you connect the unit to a Dolby Digital or DTS decoder or an amplifier with a built-in decoder by using an optional digital cable, you can enjoy high-quality surround sound.
Getting started Using the remote Using the remote amplifier/receiver. control, The battery compartment remote control unit. control unit you can operate not only all the functions is located on the back of the Press down on the point shown by the arrow at the top of the compartment cover, and pull up the cover to open the compartment.
Getting 5 Release TVNIDEO started - CANCEL. 6 Try to operate the TV by pressing TV STANDBY/ON (bit. You can operate your TV from the remote control Setting the remote operating your TV control signal unit. for TV - DVD switch TV STANDBY/ON OIl CZ.3 C_3 , _ - Numeric -ENTER _,_, If your TV turns on or off, you have successfully the control signal. set The following buttons can be used for operating the -IV.
In the following description, we assume that the buttons on the remote control use the corresponding buttons on the front panel if available. unit are mainly used, however, you may NOTE Make sure that the TV - DVD switch on the remote numeric buttons for controlling control unit is set to "DVD" when using the A/v/4/I_ and the unit. Before operation Press DVD STANDBY/ON (_/I on the remote control unit or press STANDBY/ON VII on the front panel.
Basic operations We recommend you to set the display language, TV monitor type and digital output before using the unit, depending circumstances, by following the procedure below. See "Changing the initial settings" on and after page 47 for details about each setting item. iiii T_,_ TW on ii MUTING ENTER CHOICE -- _ ,cJ PressCHOICEfor a few secondsto bring up the first page of the DVD PLAYER SET UP display. _ dj°_i!5 cJ cJj 5 Press ENTER.
Basic operations Basic playback This section describes basic operations for playback of DVD VIDEO, Audio CD, Video CD and SVCD discs. For MP3 and JPEG disc playback, see the separate chapter on and after pages 39 and 42. OPEN/CLOSE _ C3_3 C3_ C3L3 CL_ _ CL) _ DIsc 22j_S_ _ dS] _ _ dj°_i!5 c_ c_ tray l| _AOPEN/CLOSE c_j 1 Press _A OPEN/CLOSEto open the disc tray. With the label side up 2 Place a disc in the tray. 3 Press_A0PEN/CLOSEto close the disc tray.
Basic operations Available : Press The unit starts playback from the beginning. About screen saver function • A television monitor screen may be burned out if a static picture is displayed for a long time. To prevent this, the unit automatically activates the screen saver function if a static picture, such as an on-screen for over 5 minutes.
Basic operations Resuming playback The unit can memorizes the position on a disc where you interrupt playback, and resume playback from that position later. There are two resume modes (DISC RESUME and ON) you can set on the preference display. See page 52 for details about how to set the resume mode. • When purchasing the unit, the resume • You can deactivate the resume mode is initially mode by setting set to "ON". "RESUME" on the "OTHERS" preference display to "OFF". OPEN/CLOSE ir .... ....
Basic operations Available When the resume mode is set to "DISC • While 1 stopped, : RESUME" or no disc is inserted Press _A OPEN/CLOSEto insert a disc whose interrupted position is memorized. After loading the disc, the If a disc for which display you want window on the front to resume playback "RESUME PLAY" panel is already shows "----RESUME." set in the disc tray, you need not to follow the step 1. 2 Press_.
Basic operations Variable speed playback You can play back slowly TV4 C_3 _ or fast, or advance a picture frame by frame. TW _6 ,, C!3 I! /-- 5d_ _!!i_iii_ / [ I! iiiiii _ _°°_ Available • During : playback Method 1 (from the remote control unit only) Press_1_1or I_I_. Each press of _ or _ increases the playback the normal speed. Pressing _ returns the unit to normal playback. Method speed. You can select the speed among 2 x, 5 x, 10 x, 20 x and 60 x 2 H01ddown _-_ or _4.
Basic operations To locate the beginning of the scene or song You can locate the desired title or chapter (for DVD VIDEO), or track (for Audio CD/Video CD/SVCD) from which the unit starts playback. C3_ C_L3 _ Numeric_ buttons _ _ _ _ E i Available • For DVD VIDEO: For Audio CD: For Video CD/SVCD: : During playback During playback or while stopped During playback without PBC function Press 40r 4. With an Audio CD, Video CD or SVCD, pressing the button skips a track.
Basic operations NOTES • You can also specify the desired title during DVD VIDEO playback. See page 23 for details. • During DVD VIDEO playback, if a menu is shown on the TV screen, the numeric buttons may be used for selecting an item in the menu. • When (_) appears on the TV screen: The title, chapter or track you have selected is not contained in the disc. • This function does not work during Video CD/SVCD playback with PBC function (See pages 5 and 22.
Basic operations The indication on the rightmost of the status bar shows the unit's transport Appears in the playback Appears in the stop mode. Appears in the pause mode. _ Appears in the fast forward/backward playback O Appears in the slow-motion mode. mode. playback Note that pressing ON SCREEN again brings various functions. (Example status as follows: mode.
This chapter describes operations for various advanced functions of DVD VIDEO, Audio CD, Video CD and SVCD discs. For MP3 and JPEG disc playback, see the separate chapter on and after pages 39 and 42. 2 Use i/T/
Advanced operations 2 Usethe numeric buttons to select the desired item. 2 Use the numeric buttons to specify a title to be played. • To select a number between 1 and 10: Press the corresponding button for the number. • To select a number higher than 10: Use the +10 button. Examples: To select 13: +10 --> 3 To select 34: +10 --> +10 --> +10 --> 4 To select 40: +10 --> +10 --> +10 --> 10 • To select a number between 1 and 10: Press the corresponding button for the number.
Advanced operations 3 Use the numeric buttons (0 to 10) to enter the desired time. The specified menu. time is displayed in the pull-down When you correct a mistake Use 4 repeatedly to move back to the digit where you entered a undesired numeral (the leftmost "-" digit), and reenter the correct time. (Example • "10" button works this function.
Advanced Depending on the disc type and whether the disc is being played back or not, the contents shown on the TV screen differ. While stopped The opening scene of each title DVD VIDEO During playback The opening scene of each chapter in the current title Video CD/ SVCD While stopped or during playback The opening scene of each track 2 UseA/T/-
Advanced operations 4 Specify tracks in the desired order using the numeric buttons. • To select a number between 1 and 10: Press the corresponding button for the number. • To select a number higher than 10: Use the +10 button. Examples: To select 13: +10-_ 3 To select 34: +10 -_ +10 -_ +10 -_ 4 To select 40: +10 -_ +10 -_ +10 -_ 10 Up to 99 tracks can be programmed. You may select the same track more than once. The total program time is shown at the right top of the program table. The total program NO.
Advanced operations 3 PressENTER. The unit starts random playback. With a Video CD/SVCD disc, the menu bar is automatically dismissed. While random playback, the RANDOM indicator lights in the display window on the front panel. After playing all tracks of the disc, the unit stops the disc and quits the random mode. • The same track will during • During Repeat playback You can repeat playback of the current title or chapter (for DVD VIDEO), or current or all tracks (for Audio CD/ Video CD/SVCD).
Advanced operations • Audio CD/Video CD/SVCD NOTES • You can also select the repeat mode via the menu bar. See pages 36 and 37. (Screen example for Audio CD) • When the program playback mode is active with an Audio CD, Video CD or SVCD, the repeat mode changes in the same manner. i A-B Note that, however, in the "C.3" mode the unit repeats all the programmed tracks, instead of all tracks on the disc.
Advanced operations 2 Use A/v or SUBTITLEto select the subtitle. Changing the language, sound and scene angle With some DVD VIDEO discs, you can choose a desired subtitle language and/or audio language/sound, as well as a desired camera angle. Similarly, you can choose a desired audio channel (or channel combination) of a Video CD/SVCD disc, as well as a subtitle channel of an SVCD disc. Each time you press A/V or SUBTITLE, the subtitle language changes.
Advanced operations For Video CD/SVCD Each time you press A/V or AUDIO, the playback audio changes as follows. (for Video CD) Available (for SVCD) : By audio selection, you can choose the audio language of movies or enjoy KARAOKE with or without the vocal. ST2 L-1 • At the beginning of the part where multiple audio sounds are recorded, O_)_)appears on the TV screen (except when the "ON SCREEN GUIDE" preference is set to "OFF"). See page 52 for details R-1 about "ON SCREEN GUIDE" preference.
Advanced operations 3 Press ENTER. You can see the picture from the selected angle. The angle selection window is dismissed. Available : You can enjoy a variety of scene angles if the DVD VIDEO disc contains "multi-angle" parts, where multiple cameras were used to shoot the same scene from different angles. From the angle list • During DVD VIDEO playback 1 Pressand h01dANGLEfor more than 1 second. Up to nine camera angles recorded appear on the TV screen.
Advanced operations Special picture playback and picture/sound effect Available Z_ You can see continuous still pictures or zoom in (or out) the picture. You can also adjust the picture character, as well as simulate surround sound using a stereo system. : _V CZ-3 _ o_ _" _ 1_2G_ZOOM Available +/- : • During playback or while paused 5d F_4 _ • ,--al 1 PressZOOM+ or -. The unit zooms in by pressing ZOOM + or zooms out by pressing ZOOM -.
Advanced operations 3 To definea user setting, select a parameterto be edited using i/T from the followings. Available GAMMA Controls the brightness of a shaded portion without changing the brightness of the entire picture. This control is optimum when you adjust the pictures of software which generates subdued black in a bright room. The setting range is +4 to -4.
Advanced operations 3 Press i/T to adjust the effect level. You can select the effect level among "1" through "5". The higher Available value enhances the effect. : Using the 3D PHONIC function, you can get a simulated surround effect from your stereo system. I TW _2 C_.3 C23 Effect TV, C_3 level NOTES • To dismiss the 3D PHONIC window: Press 3D PHONIC. • The 3D PHONIC window disappears made for about 10 seconds.
Advanced operations Menu bar functions This section describes the functions the menu bar. The available menu bar functions the disc type. you can perform differ depending via on Numeric buttons !Liiiiiiii ENTER_ ....... _/_ _-_o@ _-) _J r->4 _d _ _ _ cz_3 _ TW _ c3L3 _ -- ON SCREEN 1 Use 4/_ to select icon you want to work with. The selected icon is pointed by [_ . 2 Press ENTER. • When a disc With is inserted many window Press ON SCREEN.
Advanced operations The following table shows the menu bar functions available for DVD VIDEO. Note that, in the description of the operation column, we assume the associated icon is selected. Menu Press ENTER to select the time mode among followings. Time mode selection (During playback TOTAL _k T.REM _ only) Selects the time mode shown in the display window on the front 3anel and in the status bar. ® Repeat mode (During playback • T.
Advanced Angle selection (during playback only) Selects a desired scene angle in the multi-angle part. operations 1 Press ENTER to open the pull-down window. 2 Use A/v to select a scene angle. Example: 1/3 _ 2/3 _ 3/3 3 Press ENTER to playback with the selected scene angle. (See page 31 for details about angle selection.) The following table shows the menu bar functions available for Audio CDNideo CD/ SVCD. Note that, in the description of the operation column, we assume the associated icon is selected.
Advanced operations Press ENTER to activate (See page 26 for details.) Random (While stopped Activates playback. only) random playback. Audio selection (During Video CD/SVCD playback only) Selects the audio channel(s). Subtitle selection (During SVCD playback Selects the subtitle. 38 random only) 1 Press ENTER to open the pull-down window. 2 Use A/v to select a desired audio channel(s). 3 Press ENTER to playback with the selected audio channel(s).
I I The unit can play back MP3 files on a private CD-R/RW disc or commercial CD. We refer to a disc that contains MP3 file as an "MP3 disc" in this manual. Though available functions with MP3 discs are limited, operations for the available functions are similar to those with Audio CD discs. Note that, if a disc contains both of MP3 and JPEG files, you can only play back files of either type selected by the MP3/JPEG setting in the PICTURE preference display.(See page 50.
MP3 disc playback 2 NOTES Move the bar to a desired Group using A/T. On the right column, are shown. • The current Group and Tracknumber are shown on the display window in the following manner. When selecting (highlighted). 3 Current Group number CurrentTrack number Currenttrack elapsed time • You cannot advance or reverse playback of an MP3 disc rapidly. • You cannot see any other time information current track elapsed time.
MP3 disc playback Available You can select a desired Group directly Group number. Available : by specifying the You can repeat playback of the current Group or all MP3 files on the disc. : Track, current 5d/_4 5d Numeric buttons REPEAT_ _ --TITLE/GROUP _._ L RM-SXV008J • During _" playback or while stopped 1 Press REPEAl. Lc__ Each time you press REPEAT, the repeat mode changes as follows. You can see the current mode via the display window as well as the MP3 CONTROL display.
The unit can play back JPEG files on a private CD-R/RW disc. We refer to a disc that contains JPEG files as a "JPEG disc" in this manual. Note that, if a disc contains both of MP3 and JPEG files, you can only play back files of either type selected by the MP3/JPEG setting in the PICTURE preference display (See page 50). What is JPEG? "JPEG" is an abbreviation Experts Group and compression • baseline sub-types JPEG: • progressive only it cannot (progressive and appears only used etc.
JPEG disc playback 3 Selecta desiredfile using _/=_,4. 4 Press ENTER. Basic operations The selected file (still picture) is shown on the TV. In the display window, you can see the current Group and file numbers. Available : When loading a JPEG disc, after the disc contents are read, the JPEG CONTROL display automatically appears on the TV screen.
JPEG disc playback To see pictures continuously Available V7 _8 CZ.3 _L3 [slide-show : mode] TW _L3 _4b_ You can see files (still pictures) one after another automatically in the slide show mode. In this mode, each file (still picture) is shown on the TV for approximately 3 seconds and then automatically changed to the next file one after another. i _ A/V/-,9/_ -- ZOOM +/- 5d_4_ Available • During JPEG picture is shown on the TV screen 1 PressZOOM+ 0r-.
JPEG disc playback Direct selection • During playback or while stopped 1 PressTITLE/GROUP. Available '__ii"_/_ i_! i_i ?_i_i _iii ii "--" is shown in the Group display area of the display window. : (Example for the indication of display window) _ c:_ _ 4b _ _ _ iiiii i iii Numeric buttons Group display ./!._ _ _TITLE//G aO u area Current track number P 2 Use the numeric buttons to specify a desired Group number.
JPEG disc playback To stop repeat playback Press ==. Note that the repeat mode remains. Available : In the slide-show mode, you can repeat playback of JPEG files in a Group or on the disc. JJ TVl TV2 TV, rl TW TW T_ iiiiiiiiiiiiiiiiiiiiii _ _ iiiiiiiiiiiiiiiiii "_45 REPEAT_ _ _ _'_ RM-SXV008J • During playback or while stopped 1 Press REPEAl. Pressing REPEAT switches the repeat mode. If you press REPEAT while stopped, you need to press _ to start repeat playback.
NOTE Make sure that the TV - DVD switch on the remote control unit is set to "DVD" when using the A/v/4/I_ and numeric buttons for controlling the unit. Selecting preferences iii ENTER -- This chapter refers to the settings which are already made when you purchase the unit (when the machine is shipped from the factory). Read this section when you want to connect this machine to a wide-vision TV set or change the settings according use this machine.
Changing the initial settings This page playback, allows you as well as the on-screen to select languages concerning with language of the display DVD VIDEO disc unit. During playback, you can bring up any page of the preference displays, however, only MENU LANGUAGE You can select language contained ON SCREEN LANGUAGE ENGLISH the default menu to be displayed if it is on a DVD VIDEO disc.
Changing This page allows you to select desired options monitor screen. concerning the initial settings with a picture or ........
Changing the initial settings SCREEN SAVER You can select the screen saver function ON or OFE See page 15 for details about screen saver function. • ON MP3/JPEG The unit can playback MP3 and JPEG files recorded on a CD-R/CDRW disc, however, if a disc contains both of MP3 and JPEG files, you can only playback files of either type selected by this menu item. • MP3 • JPEG The current • picture gets dark. OFF The screen saver function is off.
Changing theinitialsettings ANALOG DOWN MIX To playback a DVD VIDEO disc recorded with surround multichannel audio correctly, this setting must be properly made according to your audio system. DOLBY SURROUND Should be selected when you enjoy multichannel surround audio by connecting the unit's analog AUDIO OUT to a surround decoder.
Changing the initial settings This page allows you to select desired options RESUME You can select the resume playback mode. ON The unit can resume playback of the disc from the position you interrupted playback last time if it is still on the tray. • with the system. • See page 17 for details about resume playback function. OFF The resume function • concerning is not active.
Changing the initial settings Limiting playback by children Available This function restricts playback of DVD VIDEO discs which contain violent (and other) scenes according to the level set by the user. For example, if a movie which includes violent scenes supports the parental lock feature, such scenes which you do not want to let children view can be cut or replaced with other scenes.
Changing the initial settings 5 While [_ points [LEVEL], press ENTER to bring up the pull-down menu. In the pull-down menu, through "8" are available. "NONE" does not restrict strictest level. Discs level "NONE" and level playback. rated higher Level than "1" Available "1" is the the selected You can change the Parental Lock settings : later. are restricted. i ¸ Numeric buttons ENTER_ 6 Use A/T to select a desired parental lock level, then press ENTER.
Changing the initial settings 3 To changethe "COUNTORYCODE"or "LEVEL", press ENTER to bring up the associatedpull-down menu while _ points the appropriate item. To select the item to be set, use A/v down menu is shown. 4 UseA/v to select a desiredoption and press ENTER. Note that if you change the country reselect the Parental Lock level. Available when no pull- code, you must When you set the parental level strictly, some discs may not be played back at all.
Names of parts and controls Refer to the corresponding pages indicated in 0 for details.
Additional OPEN/CLOSE button (14, 16, 17) Numeric buttons @ ANGLE button (21, 31) RETURN button (23) TOP MENU button (22) @ TV - DVD switch (11, 12, 22, 39, 42, 47) @ Infrared signal-emitting TV STANDBY/ON _/I window DVD STANDBY/ON Cursor selection (< Left, I_ Right) VOL (+/-) buttons (11) TITLE/GROUP button (23, 41, 45) MENU button (22) CHOICE button (13, 47) ENTER button t<
Additional information AV COMPU LINK remote control system The JVC AV COMPU LINK system allows you to enjoy video or audio with the simplest operation.If your video/audio player (such as a DVD player, CD player and VCR) and television or/and amplifier/receiver support the JVC AV COMPU LINK system and are tied with the JVC AV COMPU LINK cable(s), when you simply starting the player, all the necessary settings of the television and/or amplifier/receiver for enjoying playback are automatically performed.
Additional information Troubleshooting What appears to be a malfunction may not always be serious. Please go through the following list before requesting service. iiiiiiii!iiiiiii_i!_i IEi_i!ili!ii!i!i!!! Symptom Possible Power does not come on. cause Remedy Power plug is not inserted securely. Possible Symptom The remote control unit does not work. Plug in securely. cause Remedy Too far from the unit. More closer to the unit.
Additional information Symptom No picture is displayed Possible on the monitor. Connection of video Input selection cause Remedy cable is incorrect. Connect the cable correctly. of TV is incorrect. Select correctly. Disc is not playable. Use a playable disc. (See page 4.) No picture is displayed on the monitor or the screen is blurred or divided into two The unit is in the progressive scan mode (i.e. the PROGRESSIVE indicator is lit) Set the Scan mode selector parts.
Additional information Frequently Asked Questions Can I play back DVD VIDEO and Video CD purchased abroad? You can play back the DVD VIDEO discs with the Region Code (local code) containing 'ALL' or '1' recorded in the NTSC or PAL system (PAL disc signals are reproduced by converting to the NTSC system). You can also play back the Video CD discs recorded in the NTSC system. Please check the information on each disc jacket.
Additional information Specifications *Specifications and appearance subject to change without prior notice. General Readable discs: Video format: DVD VIDEO, Audio CD, Video CD, SVCD NTSC, 480i (Interlaced scan)/480p (Progressive scan) selectable Other Power requirements: Power consumption: Mass: Dimensions (W x H x D): AC120V %,60Hz* 14 W (POWER ON), 1.3 W (STANDBY mode) 2.6 kg (5.8 Ibs) 435 mm x 68 mm x 267.
Additional information Appendix A: Country code list for Parental Lock This list is used for the Parental Lock operation.
Additional information Appendix B: Glossary 480i/480p Indicates format of lines with scanning the number of scan lines and scanning an image signal. 480i indicates 480 scanning interlace format, and 480p indicates 480 lines with progressive format. Aspect ratio A ratio which defines the shape of the rectangular picture in a TV. It is the width of the picture relative to the height. The conventional TV picture is 4:3 in aspect ratio. Bitstream The digital form of multichannel audio data (e.g., 5.
Additional Letter box A type of picture playback with the normal (4:3) TV screen. Black bars are shown at the top and bottom of the image to allow playing of wide-screen (16:9) DVD movie without cutting off any sides of the image on a 4:3 TV. Linear PCM audio Stands for "pulse code modulation". Linear PCM is the usual digital method without compression, used for audio playback of DVD Video discs, Audio CD discs, etc.
Additional information Appendix C: Index Numerics 3D PHONIC ...................................................................... 34, 51 480i ............................................................................ 6, 7, 60, 62 480p .................................................................................... 7, 62 A A-B repeat .................................................................. 28, 36, Angle ...............................................................
Authorized Service Centers oo ,,T JVC ® HOW TO LOCATE YOUR JVC SERVICE CENTER TOLL FREE: 1 (800) 537-5722 http://www.jvc.com Dear Customer, In order to receive the most satisfaction from your purchase,please read the instruction booklet before operating the unit.In the event that repairs are necessary, please call 1 (800)537-5722 for your nearest authorized servicer or visit our website at www.JVC.com Remember to retain your Bill of Sale for Warranty Service.
****************************************************************************** **JVC * * * , LIMITED WARRANTY * CONSUMER VIDEO 1-90 * JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONLY TO THE * ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date * of original retail purchase for the period as shown below. ("The Warranty Period") , * PARTS .
VICTOR COMPANY OF JAPAN, LIMITED EN.