Filename [DR-M1E_02Cov1.fm] DR-M1E_02Cov1.
Filename [DR-M1E_03Safety.fm] Masterpage:Left0 DR-M1E_03Safety.fm Page 2 Tuesday, September 2, 2003 6:37 PM 2 EN Safety Precautions The rating plate and the safety caution are on the rear of the unit. WARNING: DANGEROUS VOLTAGE INSIDE WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. CAUTION A UNIT IS A CLASS 1 LASER PRODUCT. HOWEVER THIS UNIT USES A VISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED.
Filename [DR-M1E_03Safety.fm] Masterpage:Right-No-Heading DR-M1E_01.book Page 3 Friday, August 15, 2003 8:15 PM EN For Italy: “It is declared that this product, brand JVC, conforms to the Ministry Decree n. 548 of 28 Aug.’95 published in the Official Gazette of the Italian Republic n. 301 of 28 Dec.’95” The STANDBY/ON 1 button does not completely shut off mains power from the unit, but switches operating current on and off. “`” shows electrical power standby and “!” shows ON.
Filename [DR-M1E_01TOC.fm] Masterpage:Left DR-M1E_01.book Page 4 Friday, August 15, 2003 8:15 PM 4 EN CONTENTS SAFETY FIRST 2 Safety Precautions ............................................... 2 DISC INFORMATION 5 About Discs ......................................................... 5 INDEX 10 INSTALLING YOUR NEW UNIT 16 Basic Connections ............................................. 16 S-VIDEO Connection ........................................ 17 Component Video Connection ..................
Filename [DR-M1E_05DiscInfo.fm] Masterpage:Right0 DR-M1E_05DiscInfo.fm Page 5 Monday, September 1, 2003 4:22 PM EN DISC INFORMATION About Discs Recordable/playable discs You can use discs with the following logos for recording and playback. DVD-RAM DVD-R DVD-RW 12 cm: 4.7 GB/9.4 GB 8 cm: 1.4 GB/2.8 GB (VR mode) 12 cm: 4.7 GB 8 cm: 1.4 GB General Ver. 2.0 (Video mode) 12 cm: 4.7 GB Ver. 1.0 (VR mode only) Ver. 1.
Filename [DR-M1E_05DiscInfo.fm] Masterpage:Left+ DR-M1E_01.book Page 6 Friday, August 15, 2003 8:15 PM 6 EN DISC INFORMATION (cont.) Discs for Playback Only Unplayable Discs You can use discs with the following logos for playback only. The following types of discs cannot be played using this unit. Do not attempt to play back any kind of disc that is damaged (cracked, warped, or repaired with adhesive tape) or discs in unusual shapes (heart-shaped, octagonal, or other forms).
Filename [DR-M1E_05DiscInfo.fm] Masterpage:Right-No-Heading DR-M1E_05DiscInfo.fm Page 7 Thursday, August 28, 2003 2:35 PM EN Recording Medium and Format File Structure of Discs DVD-RAM DVD VIDEO ● Recording and erasing can be performed as many times as possible on a disc. ● Editing can be performed after recording, such as deleting unwanted parts.
Filename [DR-M1E_05DiscInfo.fm] Masterpage:Left+ DR-M1E_05DiscInfo.fm Page 8 Thursday, August 28, 2003 5:32 PM 8 EN DISC INFORMATION (cont.) JPEG/MP3 Disc (CD-R/RW/ROM) MP3/JPEG files put in directories nested in several levels on a disc will be organized as if they were put in single level directories (groups) by the MP3/JPEG Navigation of this unit. (墌 pg.
Filename [DR-M1E_05DiscInfo.fm] Masterpage:Right-No-Heading DR-M1E_05DiscInfo.fm Page 9 Friday, August 29, 2003 9:44 AM EN Placing a Disc 9 Care and Handling of Discs Opening the disc tray Press x on the unit or remote control to open the disc tray. How to handle discs When handling a disc, do not touch the surface of the disc. Since discs are made of plastic, they are easily damaged.
Filename [DR-M1E_06Name.fm] DR-M1E_01.book Page 10 Friday, August 15, 2003 8:15 PM 10 EN Masterpage:Left0 INDEX FRONT VIEW A Standby/On Button (1 (STANDBY/ON)) 墌 pg. 19 B Infrared Beam Receiving Window C Programme Button (PR +/–) 墌 pg. 51 D Automatic Satellite Programme Recording Button (SAT#) 墌 pg. 63 E Recording Mode Button (REC MODE) 墌 pg. 51 F Disc Tray G Open/Close Button (x (OPEN/CLOSE)) 墌 pg. 9 H Back Skip Button (2) 墌 pg. 31 I Forward Skip Button (6) 墌 pg. 31 J Stop Button (8) 墌 pg.
Filename [DR-M1E_06Name.fm] Masterpage:Right-No-Heading DR-M1E_06Name.fm Page 11 Thursday, August 28, 2003 3:00 PM EN 11 REAR VIEW A Antenna Input Connector (ANTENNA IN) 墌 pg. 16 B Component Video Output Connectors (COMPONENT VIDEO OUT (L-1)) 墌 pg. 18 C S-video Output Connector (S-VIDEO OUT) 墌 pg. 17 D Audio Output Connectors (AUDIO OUT (RIGHT/LEFT)) 墌 pg. 17 E Digital Audio Output Connectors (DIGITAL AUDIO OUT (COAXIAL/OPTICAL)) 墌 pg. 84, 91 F Region Number Label 墌 pg.
Filename [DR-M1E_06Name.fm] DR-M1E_06Name.fm Page 12 Monday, September 1, 2003 3:47 PM 12 EN Masterpage:Left+ INDEX (cont.) FRONT DISPLAY PANEL A VPS/PDC Indicator 墌 pg. 57 Appears when checking if the station being received transmits a VPS/PDC signal. Disc Type/Status Indicator When a disc is loaded, the type of the disc is indicated. When a disc is running, the disc marks rotate. During High-Speed Search: Rotate faster than normal playback. During Slow Motion: Rotate slower than normal playback.
Filename [DR-M1E_06Name.fm] DR-M1E_06Name.fm Page 13 Monday, September 1, 2003 3:47 PM Masterpage:Right-No-Heading EN G Simulated Surround Effect Indicator (3D) 墌 pg. 45 Lights when a simulated surround effect is set to “3D-ON” in Play Set Up menu. H Linear PCM Indicator (LPCM) Lights when “XP MODE REC AUDIO” is set to “LINEAR PCM” (墌 pg. 94) for recording with DVD-RAM, DVD-R and DVD-RW discs, and when Linear PCM audio is played. I Random/Programme Playback Mode Indicator (RND/PRGM) 墌 pg.
Filename [DR-M1E_06Name.fm] Masterpage:Left+ DR-M1E_06Name.fm Page 14 Friday, August 29, 2003 9:45 AM 14 EN INDEX (cont.) ON-SCREEN DISPLAY When DISPLAY on the remote control is pressed, various operational indicators appear on the TV screen. A Disc Display Displays the type of the disc loaded on the disc tray. B Title Number* Displays number of the title currently being played back. C Playback Operation Status Indicator* Indicates playback operation status by pictographs.
Filename [DR-M1E_06Name.fm] Masterpage:Right-No-Heading DR-M1E_06Name.fm Page 15 Thursday, August 28, 2003 5:34 PM EN REMOTE CONTROL Buttons with a small dot on the left side of the name can also be used to operate your TV. (墌 pg. 86) (VIDEO)) 墌 pg. 52 A Video Button ( B Timer Button (# (TIMER)) 墌 pg. 55, 57 C Number Keys 墌 pg. 30, 47, 51, 54, 68, 85, 99 D Auxiliary Button (AUX) 墌 pg. 97 E Cancel Button (& (CANCEL)) 墌 pg. 40, 47, 54, 61, 77, 100 F Programme Check Button (PROG/CHECK) 墌 pg.
Filename [DR-M1E_06Name.fm] Masterpage:Left0 DR-M1E_01.book Page 16 Friday, August 15, 2003 8:15 PM 16 EN INSTALLING YOUR NEW UNIT Basic Connections Aerial connector Back of TV It’s essential that your unit be properly connected. THESE STEPS MUST BE COMPLETED BEFORE ANY VIDEO OPERATION CAN BE PERFORMED. A Check the contents. Make sure the package contains all of the accessories listed in “SPECIFICATIONS” on page 114. B Install the unit.
Filename [DR-M1E_06Name.fm] Masterpage:Right-No-Heading DR-M1E_06Name.fm Page 17 Thursday, August 28, 2003 3:01 PM EN 17 8 To connect to TV’s S-VIDEO input and AUDIO input connectors S-VIDEO Connection A Connect the unit to a TV. A Connect the aerial, unit and TV as per “Basic Connections”. (墌 pg. 16) B Connect the unit’s S-VIDEO OUT connector to the TV’s S-VIDEO input connector. C Connect the unit’s AUDIO OUT connectors to the TV’s AUDIO input connectors. B Connect the unit to mains.
Filename [DR-M1E_06Name.fm] Masterpage:Left+ DR-M1E_06Name.fm Page 18 Friday, August 22, 2003 3:55 PM 18 EN INSTALLING YOUR NEW UNIT (cont.) Component Video Connection TV aerial cable Component video connection enables you to obtain high-quality component video pictures. 8 To connect to TV’s component video input connectors A Connect the unit to TV. A Perform A – C in step C in “Basic Connections” (墌 pg. 16).
Filename [DR-M1E_06Name.fm] Masterpage:Right0 DR-M1E_01.book Page 19 Friday, August 15, 2003 8:15 PM EN INITIAL SETTINGS Auto Set Up Auto Channel Set/Auto Clock Set/ Auto Guide Program Number Set After the 1 button on the unit (or DVD 1 on the remote control) is pressed for the first time to turn on the unit, by simply selecting your country*, the Auto Set Up function sets the tuner channels, clock** and Guide Program numbers automatically.
Filename [DR-M1E_06Name.fm] Masterpage:Left+ DR-M1E_01.book Page 20 Friday, August 15, 2003 8:15 PM 20 EN D Perform Auto Set Up. A Press ENTER. ● The AUTO SET/T-V LINK display appears on the TV screen. B Press rt to move the arrow to “AUTO EINSTELLUNG”, then press ENTER. INITIAL SETTINGS (cont.
Filename [DR-M1E_06Name.fm] Masterpage:Right-No-Heading DR-M1E_06Name.fm Page 21 Thursday, August 21, 2003 8:11 PM EN Preset Download Auto Channel Set by Downloading from TV/Auto Clock Set/Auto Guide Program Number Set ATTENTION: You can use this function only with a TV offering T-V Link, etc.* Be sure to use a fully-wired 21-pin SCART cable. * Compatible with TVs offering T-V Link, EasyLink, Megalogic, SMARTLINK, Q-Link or DATA LOGIC via a fully-wired 21-pin SCART cable.
Filename [DR-M1E_06Name.fm] Masterpage:Left+ DR-M1E_06Name.fm Page 22 Thursday, August 21, 2003 8:11 PM 22 EN INITIAL SETTINGS (cont.) Results of Auto Set Up/Preset Download appearing on the front display panel If both Auto Channel Set and Auto Clock Set have been performed successfully, the correct current time is displayed. Turn on the TV and select its AV mode, then make sure that all necessary stations have been stored in the unit’s memory by using the PR +/– button(s).
Filename [DR-M1E_06Name.fm] Masterpage:Right-No-Heading DR-M1E_01.book Page 23 Friday, August 15, 2003 8:15 PM EN Monitor Set You can select the monitor type depending on the TV used when you play back DVD VIDEO discs recorded for wide-screen TVs. ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. A Access the Main Menu screen. Press SET UP. B Access the “VIDEO IN/OUT” screen. A Press w e to move the arrow to “FUNCTION SET UP”, then press ENTER.
Filename [DR-M1E_06Name.fm] Masterpage:Left+ DR-M1E_06Name.fm Page 24 Wednesday, September 3, 2003 4:00 PM 24 EN Language ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. INITIAL SETTINGS (cont.) C Select the desired language. A Press rt to move the arrow to “ON SCREEN LANGUAGE”, then press ENTER. B Press rt to select your desired language, then press ENTER. D Complete the setting. Press SET UP.
Filename [DR-M1E_06Name.fm] Masterpage:Right 3Column DR-M1E_01.
Filename [DR-M1E_06Name.fm] Masterpage:Left0 DR-M1E_01.book Page 26 Friday, August 15, 2003 8:15 PM 26 EN SAT CONTROL SET Satellite Receiver Control Setting Satellite receiver The following procedure is required if you receive satellite channels through a satellite receiver. Approximately 20 seconds before the SHOWVIEW timer programming (墌 pg. 54) or Manual Timer programming (墌 pg.
Filename [DR-M1E_06Name.fm] Masterpage:Right0 DR-M1E_06Name.fm Page 27 Thursday, August 28, 2003 3:02 PM EN 27 Setting satellite receiver’s brand and channel After installation, set the satellite receiver’s brand and channel correctly; otherwise, the Satellite Controller cannot work correctly. ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. A Turn on the satellite receiver. Turn on the satellite receiver’s power. B Access the Main Menu screen.
Filename [DR-M1E_06Name.fm] Masterpage:Left0 DR-M1E_06Name.fm Page 28 Thursday, August 21, 2003 8:11 PM 28 EN T-V LINK F Check the result of the test. If the satellite receiver’s channel number has been changed to the same one as you set in step E. Press w e to move the arrow to “YES”, then press ENTER to finish the Sat Control Set mode. T-V Link Functions When you connect the unit to your TV via a fully-wired 21-pin SCART cable (墌 pg. 16), the following functions are available.
Filename [DR-M1E_07Playback.fm] Masterpage:Right0 DR-M1E_07Playback.fm Page 29 Thursday, August 28, 2003 5:35 PM EN PLAYBACK OPERATIONS Basic Playback 29 To play back an MP3/JPEG disc, see “Playback with MP3/JPEG Navigation” (墌 pg. 76). A Load a disc. A Press x to open the disc tray. B Place the disc on the disc tray. ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. ● For details, refer to “Placing a Disc” (墌 pg. 9).
Filename [DR-M1E_07Playback.fm] Masterpage:Left+ DR-M1E_01.book Page 30 Friday, August 15, 2003 8:15 PM 30 EN Playback Features ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. PLAYBACK OPERATIONS (cont.) Locating a desired scene using the DVD menu DVD VIDEO discs may have top menu and disc menu. Top menu DVD discs generally have their own menus which show the disc contents.
Filename [DR-M1E_07Playback.fm] Masterpage:Right-No-Heading DR-M1E_01.book Page 31 Friday, August 15, 2003 8:15 PM EN Locating the start point of the item or skip the item 31 High-Speed Search During playback, press 5 for forward high-speed search, or 3 for reverse high-speed search. Press 2 or 6 during playback. ● Pressing 6 locates the start point of the item or skips the item for forward direction, then resumes playback.
Filename [DR-M1E_07Playback.fm] Masterpage:Left+ DR-M1E_07Playback.fm Page 32 Thursday, August 28, 2003 5:55 PM 32 EN PLAYBACK OPERATIONS (cont.) Marking positions to play again later It is possible to mark positions (up to 999 points) where you want to play back once again later, and start playback from a marked position. Marking onto DVD-RAM/RW/R discs when recording is helpful to locate a start point when you play back the discs later. 1 Mark positions.
Filename [DR-M1E_07Playback.fm] Masterpage:Right-No-Heading DR-M1E_07Playback.fm Page 33 Thursday, August 28, 2003 6:18 PM EN Switching Time Indication 33 1 Access Subtitle display. Press SUBTITLE during playback. You can check time information of an audio CD and a Video CD on the front display panel and the TV screen.
Filename [DR-M1E_07Playback.fm] Masterpage:Left+ DR-M1E_07Playback.fm Page 34 Friday, August 29, 2003 4:49 PM 34 EN PLAYBACK OPERATIONS (cont.) NOTE: It is not possible for DVD-R/DVD-RW (Video mode) disc playback to switch the audio channel. The audio channel is played back as set in “AUDIO REC” (墌 pg. 94).
Filename [DR-M1E_07Playback.fm] Masterpage:Right-No-Heading DR-M1E_01.book Page 35 Friday, August 15, 2003 8:15 PM EN Recording/playback status display Live Memory Playback This unit records pictures onto DVD-RAM discs, instead of video tapes, then plays back the pictures recorded on the discs. This makes it possible to achieve high-speed writing and read-out that has not been possible with conventional VCRs, enabling recording and playback simultaneously.
Filename [DR-M1E_07Playback.fm] Masterpage:Left+ DR-M1E_07Playback.fm Page 36 Friday, August 29, 2003 9:46 AM 36 EN PLAYBACK OPERATIONS (cont.) Overview of Live Memory Playback You can play back a programme you are recording from the beginning while continuing to record or timer record onto a DVD-RAM disc. This is called “Live Memory Playback”.
Filename [DR-M1E_07Playback.fm] Masterpage:Right-No-Heading DR-M1E_07Playback.fm Page 37 Wednesday, September 3, 2003 7:43 PM EN 37 Display during Live Memory Playback During recording, you can watch at your will what was previously recorded or is currently being recorded. It is possible to perform freely normal playback operations (forward/reverse high-speed search and variable-speed search) within the range of the red or blue bar on the TV screen.
Filename [DR-M1E_07Playback.fm] Masterpage:Left+ DR-M1E_01.book Page 38 Friday, August 15, 2003 8:15 PM 38 EN PLAYBACK OPERATIONS (cont.) Buttons to be used during Live Memory Playback Available buttons 6 Functions ● Pressing once skips forward to the beginning of the next chapter being played back. ● Pressing down for 2 or more seconds during playback advances playback at 5 times the normal speed while pressed. Releasing the button resumes normal playback.
Filename [DR-M1E_07Playback.fm] Masterpage:Right-No-Heading DR-M1E_01.book Page 39 Friday, August 15, 2003 8:15 PM EN ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. 39 To play back from the beginning of the programme while recording You can play back a programme you are recording from the beginning while continuing to record or timer record onto a DVD-RAM disc. 1 Start Live Memory Playback. Press 4.
Filename [DR-M1E_07Playback.fm] Masterpage:Left+ DR-M1E_01.book Page 40 Friday, August 15, 2003 8:15 PM 40 EN Using Play Set Up Menu PLAYBACK OPERATIONS (cont.) How to Access Play Set Up Menu Press PLAY SET UP whenever a disc is loaded. Contents of Play Set Up Menu during playback DVD VIDEO Play Set Up Menu allows you to control various playback functions. Some of the functions operated on Navigation Menu can be controlled on Set Up Menu.
Filename [DR-M1E_07Playback.fm] Masterpage:Right-No-Heading DR-M1E_01.book Page 41 Friday, August 15, 2003 8:15 PM EN 41 Basic operation on Play Set Up Menu Example: When selecting Picture Control function of DVD During playback or while stopped 1 Access Play Set Up Menu. Press PLAY SET UP. ● The item currently selected is highlighted and pointed by 0. 2 Select the menu item. Press w e to select “ ”, then press ENTER. ● The pop-up window appears under the selected item. 3 Select the option.
Filename [DR-M1E_07Playback.fm] Masterpage:Left+ DR-M1E_01.book Page 42 Friday, August 15, 2003 8:15 PM 42 EN PLAYBACK OPERATIONS (cont.) Repeat Playback A-B Repeat Playback You can repeat playback as you like according to the type of disc. You can repeat the desired part. 1 Access Play Set Up Menu. Press PLAY SET UP. 2 Select the menu item. Press w e to select “ ”, then press ENTER. ● The pop-up window appears under the selected item. During playback 1 Access Play Set Up Menu.
Filename [DR-M1E_07Playback.fm] Masterpage:Right-No-Heading DR-M1E_01.book Page 43 Friday, August 15, 2003 8:15 PM EN Random Playback 43 3 Select the tracks in the desired order. Use number keys (1–9, 0) to enter the track numbers. You can play back all the tracks on the disc in random order. While stopped 1 Access Play Set Up Menu. Press PLAY SET UP. 2 Select the menu item. Press w e to select “RND”, then press ENTER. ● Playback starts in random order.
Filename [DR-M1E_07Playback.fm] Masterpage:Left+ DR-M1E_07Playback.fm Page 44 Thursday, August 28, 2003 3:43 PM 44 EN PLAYBACK OPERATIONS (cont.) Locating the beginning of a desired selection You can locate the beginning of a title, chapter, group or track. During playback or while stopped 1 Access Play Set Up Menu. Press PLAY SET UP. 2 Select the menu item. Press w e to select “ ”, then press ENTER. 3 Select the desired item.
Filename [DR-M1E_07Playback.fm] Masterpage:Right-No-Heading DR-M1E_07Playback.fm Page 45 Thursday, August 28, 2003 3:43 PM EN 45 Time Search Simulated Surround Effect You can play back a disc from the desired point by specifying the elapsed playing time from the beginning of a title (DVD-RAM, DVD-R, DVD-RW and DVD VIDEO) or a disc (Video CD and Audio CD). It is possible to get a simulated surround effect from your stereo system.
Filename [DR-M1E_07Playback.fm] Masterpage:Left+ DR-M1E_01.book Page 46 Friday, August 15, 2003 8:15 PM 46 EN PLAYBACK OPERATIONS (cont.) Adjusting the picture quality Setting the progressive mode You can obtain optimal picture quality by selecting an appropriate picture mode. You can obtain optimal picture quality by selecting whether the content on the disc is processed by field (video source) or by frame (film source). 1 Access Play Set Up Menu. Press PLAY SET UP. 2 Select the menu item.
Filename [DR-M1E_07Playback.fm] Masterpage:Right-No-Heading DR-M1E_07Playback.fm Page 47 Friday, August 22, 2003 11:33 AM EN Parental Lock This function restricts playback of DVD VIDEO discs which contain violent (and other) scenes according to the level set by the user. For example, if a movie which includes violent scenes supports the parental lock feature, such scenes which you do not want to let children view can be cut or replaced by other scenes. ● Turn on the unit.
Filename [DR-M1E_07Playback.fm] Masterpage:Left+ DR-M1E_01.book Page 48 Friday, August 15, 2003 8:15 PM 48 EN PLAYBACK OPERATIONS (cont.) To change the settings To temporarily release Parental Lock You can change the Parental lock settings later. When you set the parental lock level strictly, some discs may not be played back at all.
Filename [DR-M1E_07Playback.fm] Masterpage:Right-No-Heading DR-M1E_07Playback.
Filename [DR-M1E_07Playback.fm] Masterpage:Left+ DR-M1E_07Playback.
Filename [DR-M1E_08Recording.fm] Masterpage:Right0 DR-M1E_01.book Page 51 Friday, August 15, 2003 8:15 PM EN RECORDING Basic Recording ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. ATTENTION: It is not possible to record programmes on a DVD-R disc which has already been finalised. 51 C Set the recording speed. Press REC MODE repeatedly until the desired recording speed appears.
Filename [DR-M1E_08Recording.fm] Masterpage:Left+ DR-M1E_08Recording.fm Page 52 Thursday, August 28, 2003 4:03 PM 52 EN RECORDING (cont.) Recording Features Instant Timer Recording (ITR) This easy method lets you record for from 30 minutes to 6 hours (selectable in 30-min. increments), and shuts the unit off after recording is finished. 1 Start recording. Press 7 on the unit. 2 Engage the ITR mode. Press 7 again. On the front display panel, “0:30” appears. 3 Set the recording duration.
Filename [DR-M1E_08Recording.fm] Masterpage:Right-No-Heading DR-M1E_08Recording.fm Page 53 Wednesday, September 3, 2003 7:45 PM EN Free Rate Function 53 NOTES: To record the entire programme, the unit automatically set the appropriate recording speed depending on the combination of the total time of the programme to be recorded and either the remaining disc space or the specified recording time (from 60 minutes to 360 minutes).
Filename [DR-M1E_08Recording.fm] Masterpage:Left0 DR-M1E_01.book Page 54 Friday, August 15, 2003 8:15 PM 54 EN TIMER RECORDING SHOWVIEW Timer Programming ® A Load a disc. A Press x to open the disc tray. B Place a recordable disc on the disc tray. ● For details, refer to “Placing a Disc” (墌 pg. 9). C Press x to close the disc tray. B Access the S HOWVIEW You can programme this unit to timer-record as many as 8 programmes.
Filename [DR-M1E_08Recording.fm] Masterpage:Right-No-Heading DR-M1E_01.book Page 55 Friday, August 15, 2003 8:15 PM EN the following recording options as E Set required. A Press w e to select the desired option. B Press rt to select the desired setting, then press ENTER. “REC MODE” (墌 pg. 52, “Recording Speed”) (墌 pg. 53, “Free Rate Function”), “VPS/PDC” (墌 pg. 57, “VPS/PDC Recording”), “DAILY/WEEKLY” (墌 pg. 55, “Daily/Weekly Rec Function”), “NAME” (墌 pg.
Filename [DR-M1E_08Recording.fm] Masterpage:Left+ DR-M1E_01.book Page 56 Friday, August 15, 2003 8:15 PM 56 EN Manual Timer Programming You can programme this unit to timer-record as many as 8 programmes. If you do not know the SHOWVIEW number for the programme you wish to record, use the following procedure to set your unit to timer-record the programme. Before performing Manual Timer Programming: ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD.
Filename [DR-M1E_08Recording.fm] Masterpage:Right-No-Heading DR-M1E_01.book Page 57 Friday, August 15, 2003 8:15 PM EN F Enter the recording stop time. Press w e to select “STOP”, then press rt repeatedly to set the desired stop time. ● Each press of rt advances/goes back the stop time in 1-min. increments. ● To advance/go back the stop time in 30-min. increments, press and hold rt. G Enter the channel position. Press w e to select “TV PROG”, then press rt repeatedly to select the desired channel.
Filename [DR-M1E_08Recording.fm] Masterpage:Left+ DR-M1E_08Recording.fm Page 58 Wednesday, September 3, 2003 7:46 PM 58 EN On-Disc Timer Programming TIMER RECORDING (cont.) To make the disc for On-Disc Timer Programming A Load a disc. A Press x to open the disc tray. B Place a recordable disc on the disc tray. On-Disc Timer Programming is a function used with discs that are especially intended for a specific programme.
Filename [DR-M1E_08Recording.fm] Masterpage:Right-No-Heading DR-M1E_08Recording.fm Page 59 Thursday, August 28, 2003 4:19 PM EN F Enter the recording stop time. Press w e to select “STOP”, then press rt repeatedly to set the desired stop time. ● Each press of rt advances/goes back the stop time in 1-min. increments. ● To advance/go back the stop time in 30-min. increments, press and hold rt. G Enter the channel position.
Filename [DR-M1E_08Recording.fm] Masterpage:Left+ DR-M1E_08Recording.fm Page 60 Friday, August 29, 2003 4:33 PM 60 EN TIMER RECORDING (cont.) How discs are overwritten (Example 1) To record a 1-hour serial drama every Friday in SP mode Overwritten 1st Blank 2nd 1st 2nd 3rd The first programme is overwritten by the third. Overwritten 4th 3rd The second programme is overwritten by the forth.
Filename [DR-M1E_08Recording.fm] Masterpage:Right-No-Heading DR-M1E_08Recording.fm Page 61 Thursday, September 4, 2003 11:25 AM EN 61 C Access the programme screen. Press rt to select the programme, then press ENTER. D Change a programme. Change the settings of the desired recording options as required. ● Refer to steps D – I in “Manual Timer Programming” (墌 pg. 56). E Complete timer correction. Press PROG/CHECK. ● The previous screen resumes. F Engage the unit’s timer mode.
Filename [DR-M1E_08Recording.fm] Masterpage:Left+ DR-M1E_08Recording.fm Page 62 Wednesday, September 3, 2003 7:51 PM 62 EN TIMER RECORDING (cont.) When programmes overlap each other If “PROGRAM OVERLAPPED” appears, you have another programme overlapping the programme you have just made. Confirm with the arrow on “OK”, then press PROG/CHECK. Programme Check screen appears and conflicting programmes will be highlighted in pink. Example: Programme 3 (you have just made) and Programme 4 overlap each other.
Filename [DR-M1E_08Recording.fm] Masterpage:Right-No-Heading DR-M1E_01.book Page 63 Friday, August 15, 2003 8:15 PM EN Automatic Satellite Programme Recording This function allows you to automatically record a satellite programme which is timer-programmed on your external satellite receiver. Connect a satellite receiver to the unit’s L-2 IN/DECODER connector and programme the timer on the satellite receiver.
Filename [DR-M1E_09Navigation.fm] DR-M1E_09Navigation.fm Page 64 Friday, August 22, 2003 11:35 AM 64 EN Masterpage:Left0 NAVIGATION Library Database DVD Navi The Library Database DVD Navi enables you to search and select the desired programmes recorded on a DVD-RAM/R/RW (VR) disc very easily. You can record up to 99 programmes on a disc. Each time a programme is recorded on the disc, the information of the programme is registered for the Library Database DVD Navi automatically.
Filename [DR-M1E_09Navigation.fm] Masterpage:Right-No-Heading DR-M1E_09Navigation.fm Page 65 Monday, September 1, 2003 4:22 PM EN Using Library Database DVD Navi system, you can easily modify registered information, edit the programme or play list, as well as search for the beginning of each programme.
Filename [DR-M1E_09Navigation.fm] Masterpage:Left+ DR-M1E_01.book Page 66 Friday, August 15, 2003 8:15 PM 66 EN Scan for Beginning(s) of Programme(s) ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. NAVIGATION (cont.) You can scan the beginning of the programme easily with the Library Database DVD Navi. A Turn on the unit. Press DVD 1. B Load a disc. A Press x to open the disc tray. B Place a recorded disc on the disc tray.
Filename [DR-M1E_09Navigation.fm] Masterpage:Right-No-Heading DR-M1E_09Navigation.fm Page 67 Thursday, August 28, 2003 4:27 PM EN Modify Original Information ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. 67 Modify Index A Turn on the unit. Press DVD 1. B Access the Index screen. A Press NAVIGATION. The Library Database DVD Navi screen appears. B Press rt w e to move the arrow to “ORIGINAL”, then press ENTER. C Select a programme.
Filename [DR-M1E_09Navigation.fm] Masterpage:Left+ DR-M1E_09Navigation.fm Page 68 Thursday, August 28, 2003 4:27 PM 68 EN Modify Programme Name Perform steps A to C of “Modify Index” (墌 pg. 67) before continuing. NAVIGATION (cont.) Modify Category Perform steps A to C of “Modify Index” (墌 pg. 67) before continuing. A Access the modify screen. A Access the modify screen. B Enter new name. B Select new category. A Press rt w e to move the arrow to “MODIFY”, then press ENTER.
Filename [DR-M1E_09Navigation.fm] Masterpage:Right-No-Heading DR-M1E_01.book Page 69 Friday, August 15, 2003 8:15 PM EN Delete programme You cannot record any more with Library Database DVD Navi once the registered programmes on the disc reach 99 programmes. Deleting unnecessary programmes after dubbing (墌 pg. 81, “Edit To Or From Another Recorder”) or other operations can increase remaining time and available recording capacity.
Filename [DR-M1E_09Navigation.fm] Masterpage:Left+ DR-M1E_01.book Page 70 Friday, August 15, 2003 8:15 PM 70 EN Modify Play List Information ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. NAVIGATION (cont.) Create Play List A Turn on the unit. Press DVD 1. B Load a disc. A Press x to open the disc tray. B Place a DVD-RAM or DVD-RW (VR mode) disc that was recorded with this unit on the disc tray. ● For details, refer to “Placing a Disc” (墌 pg. 9).
Filename [DR-M1E_09Navigation.fm] Masterpage:Right-No-Heading DR-M1E_01.book Page 71 Friday, August 15, 2003 8:15 PM EN H Return to the normal screen. Press NAVIGATION. NOTES: ● There may be a discrepancy of several seconds between the scene you intend to edit, and the scene which is actually edited. ● The title, index and category of the play list can be modified in the same way as “ORIGINAL”. (墌 pg.
Filename [DR-M1E_09Navigation.fm] Masterpage:Left+ DR-M1E_09Navigation.fm Page 72 Thursday, August 28, 2003 4:28 PM 72 EN D Set edit-in and edit-out points. A Find the point where you want the moved scene to begin, then press ENTER with the arrow on “IN”. The edit-in time is fixed and the elapsed playing time starts counting again. B Find the point where you want the moved scene to end, then press ENTER with the arrow on “OUT”. The edit-out time is fixed. C Press 4 to start playback.
Filename [DR-M1E_09Navigation.fm] Masterpage:Right-No-Heading DR-M1E_01.book Page 73 Friday, August 15, 2003 8:15 PM EN Play back play list Perform steps A to C of “Create Play List” (墌 pg. 70) before continuing. A Select the play list(s). Press w e to move the arrow on the index (small still pictures) of the desired play list. ● When you want the plural play lists to be played back continuously, press MEMO after selecting the desired play lists. The numbers of the playback order appear on the index.
Filename [DR-M1E_09Navigation.fm] Masterpage:Left+ DR-M1E_09Navigation.fm Page 74 Wednesday, September 3, 2003 7:55 PM 74 EN Modify Library Information Programme information can be registered in the unit’s memory for up to 1,300 programmes. It is helpful when finding out on which disc the desired programme is recorded. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. NAVIGATION (cont.) Scan for Programme from library A Turn on the unit. Press DVD 1.
Filename [DR-M1E_09Navigation.fm] Masterpage:Right-No-Heading DR-M1E_09Navigation.fm Page 75 Tuesday, August 19, 2003 7:16 PM EN Register disc Delete information A Turn on the unit. A Turn on the unit. B Load a disc. B Access the library screen. Press DVD 1. A Press x to open the disc tray. B Place a disc you want to register on the disc tray. 75 Press DVD 1. C Press x to close the disc tray. A Press NAVIGATION. The Library Database DVD Navi screen appears.
Filename [DR-M1E_09Navigation.fm] DR-M1E_01.book Page 76 Friday, August 15, 2003 8:15 PM 76 EN Masterpage:Left+ NAVIGATION (cont.) Playback with MP3/JPEG Navigation This unit can play back discs that MP3 sound files and JPEG image files taken with digital still cameras or other devices are recorded. The MP3/JPEG Navigation enables you to search and select the desired files recorded on CD-R/RW or CD-ROM discs very easily.
Filename [DR-M1E_09Navigation.fm] Masterpage:Right-No-Heading DR-M1E_09Navigation.fm Page 77 Wednesday, September 3, 2003 7:56 PM EN Locating the desired group and tracks A Load a disc. A Press x to open the disc tray. B Place a disc on the disc tray. ● For details, refer to “Placing a Disc” (墌 pg. 9). C Press x to close the disc tray. B Access the MP3/JPEG Navigation screen. Press NAVIGATION. The MP3/JPEG Navigation screen appears. C Display the item.
Filename [DR-M1E_10Editing.fm] DR-M1E_01.book Page 78 Friday, August 15, 2003 8:15 PM 78 EN Masterpage:Left0 EDITING DV Dubbing You can dub programmes from a camcorder or DV equipment connected to the unit with a DV cable. The unit’s remote control allows you the limited control of the connected camcorder or DV equipment functions during dubbing. NOTE: When you connect a PC to the DV IN connector, we do not assure the normal operation of this unit.
Filename [DR-M1E_10Editing.fm] Masterpage:Right-No-Heading DR-M1E_10Editing.fm Page 79 Thursday, August 28, 2003 4:31 PM EN A Make connections. 79 NOTES: Connect a camcorder or DV equipment to the DV IN connector on the unit’s front panel. B Prepare the unit for dubbing. A Load a DVD-RAM/RW/R disc on the unit. B Press PR +/– to set the channel to “DV DUBBING”. ● Dubbing copyright guarded programmes is not possible. ● Original DV informations such as the recording date and time are not recorded.
Filename [DR-M1E_10Editing.fm] Masterpage:Left+ DR-M1E_01.book Page 80 Friday, August 15, 2003 8:15 PM 80 EN EDITING (cont.) You can use a camcorder as the source player and your unit as the recording deck. Edit From A Camcorder Slide the TV/CABLE/SAT/DVD switch to DVD. A Make connections.
Filename [DR-M1E_10Editing.fm] Masterpage:Right-No-Heading DR-M1E_01.book Page 81 Friday, August 15, 2003 8:15 PM EN Edit To Or From Another Recorder 81 You can use your unit as the source player or as the recording deck. Slide the TV/CABLE/SAT/DVD switch to DVD. A Make connections. Connect the player’s 21-pin SCART connector to the unit’s 21-pin SCART connector as illustrated.
Filename [DR-M1E_10Editing.fm] Masterpage:Left+ DR-M1E_10Editing.fm Page 82 Thursday, August 28, 2003 4:37 PM 82 EN Output/Input Set ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. EDITING (cont.) the output or input mode for the L-1 C Select IN/OUT connector. A Press rt to move the arrow to “L-1 OUTPUT” or “L-1 INPUT”, then press ENTER. B Press rt to select the appropriate setting, then press ENTER.
Filename [DR-M1E_10Editing.fm] Masterpage:Right-No-Heading DR-M1E_10Editing.fm Page 83 Wednesday, September 3, 2003 4:01 PM EN L-2 Select Setting (L-2 SELECT) Set “L-2 SELECT” to the appropriate mode depending on the type of appliance connected to the unit’s L-2 IN/DECODER connector. Perform steps A and B of “L-1 Output and L-1 Input Setting (L-1 OUTPUT and L-1 INPUT)” on page 82. the input mode for the L-2 IN/ A Select DECODER connector. A Press rt to move the arrow to “L-2 SELECT”, then press ENTER.
Filename [DR-M1E_10Editing.fm] Masterpage:Left+ DR-M1E_01.book Page 84 Friday, August 15, 2003 8:15 PM 84 EN EDITING (cont.) You can dub selected audio from a DVD or Audio CD disc to a digital audio device. However, it is not possible to dub copy-protected discs. Digital Audio Dubbing Example: Dubbing to an MD A Make connections. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD.
Filename [DR-M1E_10Editing.fm] Masterpage:Right0 DR-M1E_01.book Page 85 Friday, August 15, 2003 8:15 PM EN REMOTE CONTROL Remote Control Functions Remote 1/2/3/4 Code Switching The remote control is capable of controlling four JVC video units independently. Each of the units can respond to one of four codes (1, 2, 3 or 4). The remote control is preset to send 1 code signals because your unit is initially set to respond to 1 code signals.
Filename [DR-M1E_10Editing.fm] Masterpage:Left+ DR-M1E_10Editing.fm Page 86 Wednesday, September 3, 2003 7:59 PM 86 EN TV Multi-Brand Remote Control Your remote control can operate the basic functions of your TV set. In addition to JVC TVs, other manufacturer’s TVs can also be controlled. Before performing the following steps: ● Turn off the TV using its remote control. ● Slide the TV/CABLE/SAT/DVD switch to TV. REMOTE CONTROL (cont.) A Set the TV brand code. Keep pressing SET UP down during step A.
Filename [DR-M1E_10Editing.fm] Masterpage:Right-No-Heading DR-M1E_01.book Page 87 Friday, August 15, 2003 8:15 PM EN Satellite Receiver Multi-Brand Remote Control Your remote control can operate the basic functions of your satellite receiver set. In addition to JVC satellite receivers, other manufacturer’s satellite receivers can also be controlled. Slide the TV/CABLE/SAT/DVD switch to CABLE/SAT. 87 A Set the satellite receiver brand code. Keep pressing SET UP down during step A.
Filename [DR-M1E_10Editing.fm] Masterpage:Left0 DR-M1E_01.book Page 88 Friday, August 15, 2003 8:15 PM 88 EN SYSTEM CONNECTIONS Connecting To A Satellite Receiver Simple Connections NOTES: This is an example of a simple connection if your TV has one 21-pin AV input (SCART) connector. Connect the satellite receiver to the L-2 IN/DECODER connector, then connect the L-1 IN/OUT connector to the TV’s connector. Outdoor unit ● Set “L-2 SELECT” to “VIDEO” or “S-VIDEO”. (墌 pg.
Filename [DR-M1E_10Editing.fm] Masterpage:Right-No-Heading DR-M1E_10Editing.fm Page 89 Thursday, August 28, 2003 4:38 PM EN Perfect Connections (Recommended) This is an example of recommended connections if your TV has two 21-pin AV input (SCART) connectors. Connect the decoder to the satellite receiver’s connector if you have a decoder, L-1 IN/OUT connector to TV’s connector, and L-2 IN/DECODER connector to the satellite receiver’s connector. Then connect the satellite receiver and TV.
Filename [DR-M1E_10Editing.fm] Masterpage:Left+ DR-M1E_01.book Page 90 Friday, August 15, 2003 8:15 PM 90 EN SYSTEM CONNECTIONS (cont.) Connecting/Using A Decoder The L-2 IN/DECODER connector can be used as an input connector for an external decoder (descrambler). Simply connect a decoder and you can enjoy a variety of programming that is available through scrambled channels. A Select the input mode. Set “L-2 SELECT” to “DECODER”. (墌 pg. 83) TV receiver TV aerial cable B Connect the decoder.
Filename [DR-M1E_10Editing.fm] Masterpage:Right-No-Heading DR-M1E_10Editing.fm Page 91 Friday, August 29, 2003 4:50 PM EN 91 Connecting To A Dolby Digital Decoder or An Amplifier With Built-in DTS These instructions enable you to connect your unit to a Dolby Digital decoder or an amplifier with built-in DTS. DIGITAL AUDIO OUT (COAXIAL) Dolby Digital decoder or amplifier with built-in DTS To DIGITAL AUDIO input Back of unit Coaxial cable (not provided) Optical cable (not provided) Make connections.
Filename [DR-M1E_11Subsidiary.fm] Masterpage:Left0 DR-M1E_11Subsidiary.fm Page 92 Thursday, August 21, 2003 8:12 PM 92 EN Mode Set ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. SUBSIDIARY SETTINGS Various modes of this unit are categorized into menus nested in 2 levels shown in the following table.
Filename [DR-M1E_11Subsidiary.fm] DR-M1E_11Subsidiary.fm Page 93 Thursday, August 28, 2003 5:17 PM Masterpage:Right-No-Heading EN 93 AUDIO OUTPUT (The boldface settings in the table below indicate the settings at your purchase.) 8 DIGITAL AUDIO OUT DOLBY DIGITAL/PCM STREAM/PCM PCM ONLY 8 ANALOG AUDIO OUT STEREO DOLBY SURROUND 8 D. RANGE CONTROL NORMAL WIDE RANGE TV MODE Set to the appropriate mode according to the type of the device connected to DIGITAL AUDIO OUT connector.
Filename [DR-M1E_11Subsidiary.fm] Masterpage:Left+ DR-M1E_11Subsidiary.fm Page 94 Friday, August 22, 2003 11:36 AM 94 EN SUBSIDIARY SETTINGS (cont.) RECORDING SET (The boldface settings in the table below indicate the settings at your purchase.) 8 SAVE AS LIBRARY OFF ON 8 XP MODE REC AUDIO DOLBY DIGITAL LINEAR PCM 8 AUDIO REC NICAM 1/MAIN NICAM 2/SUB MONO When this function is set to “ON”, the recording information is automatically stored in the library.
Filename [DR-M1E_11Subsidiary.fm] DR-M1E_11Subsidiary.fm Page 95 Thursday, August 21, 2003 8:13 PM Masterpage:Right-No-Heading EN 95 DISPLAY SET (The boldface settings in the table below indicate the settings at your purchase.) 8 SUPERIMPOSE OFF AUTO ON You can select the modes of indications superimposed on the TV screen. OFF: To turn off superimposed indications. AUTO: To superimpose operational indications for approximately five seconds just after the corresponding operation.
Filename [DR-M1E_11Subsidiary.fm] DR-M1E_01.book Page 96 Friday, August 15, 2003 8:15 PM 96 EN Masterpage:Left+ SUBSIDIARY SETTINGS (cont.) OTHERS (The boldface settings in the table below indicate the settings at your purchase.) 8 AUTO TIMER OFF ON When this function is set to “ON”, the timer is automatically engaged when the unit power is turned off, and automatically disengaged when the unit is powered back on.
Filename [DR-M1E_11Subsidiary.fm] Masterpage:Right-No-Heading DR-M1E_01.book Page 97 Friday, August 15, 2003 8:15 PM EN 97 SHOWVIEW System Setup ® IMPORTANT: Normally, Auto Set Up (墌 pg. 19), Preset Download (墌 pg. 21) or Auto Channel Set (墌 pg. 98) sets the Guide Program numbers automatically. You need to set the Guide Program numbers manually only in the following cases.
Filename [DR-M1E_11Subsidiary.fm] Masterpage:Left+ DR-M1E_01.book Page 98 Friday, August 15, 2003 8:15 PM 98 EN Tuner Set ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. SUBSIDIARY SETTINGS (cont.) Your unit needs to memorise all necessary stations in channel positions in order to record TV programmes.
Filename [DR-M1E_11Subsidiary.fm] Masterpage:Right-No-Heading DR-M1E_11Subsidiary.fm Page 99 Thursday, September 4, 2003 6:10 PM EN F View the Confirmation screen. “SCAN COMPLETED” is displayed on the TV screen. Press “OK”, then the Confirmation screen appears. The confirmation screen lists the channel position number (PR), station channel number (CH), and station name (ID) (墌 pg. 103, “TV Station And ID List”) of all stored broadcast stations.
Filename [DR-M1E_11Subsidiary.fm] Masterpage:Left+ DR-M1E_11Subsidiary.fm Page 100 Thursday, August 21, 2003 8:13 PM 100 EN SUBSIDIARY SETTINGS (cont.) D Select the band. Delete A Channel A Press rt to select “BAND”, then press ENTER. B Press rt to change the band between CH (regular) and CC (cable), then press ENTER. Perform steps A and B of “Manual Channel Set” on page 99 to access the Confirmation screen before continuing. A Select the item. Press rt w e to select the item you want to delete.
Filename [DR-M1E_11Subsidiary.fm] Masterpage:Right-No-Heading DR-M1E_01.book Page 101 Friday, August 15, 2003 8:15 PM EN When Receiving A Scrambled Broadcast A Select the decoder mode. B Access the Confirmation screen. Set “L-2 SELECT” to “DECODER”. (墌 pg. 83, “L-2 Select Setting (L-2 SELECT)”) Perform steps A and B of “Manual Channel Set” on page 99. C Select the position. Press rt w e to select the channel position broadcasting scrambled programmes, then press ENTER twice.
Filename [DR-M1E_11Subsidiary.fm] Masterpage:Left+ DR-M1E_01.book Page 102 Friday, August 15, 2003 8:15 PM 102 EN Set Stations (B) SUBSIDIARY SETTINGS (cont.) Fine-Tuning Channels Already Stored Set station names other than the ones registered in your unit. Perform steps A and B of “Manual Channel Set” on page 99 to access the Confirmation screen and then perform steps A and B of “Set Stations (A)” (墌 pg. 101) before continuing. A Select the character for station name.
Filename [DR-M1E_11Subsidiary.fm] Masterpage:Right 3Column DR-M1E_01.
Filename [DR-M1E_11Subsidiary.fm] Masterpage:Left+ DR-M1E_11Subsidiary.fm Page 104 Wednesday, September 3, 2003 8:01 PM 104 EN Clock Set ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. SUBSIDIARY SETTINGS (cont.) IMPORTANT: If you performed Auto Set Up (墌 pg. 19) or Preset Download (墌 pg. 21), without ever having set the clock previously, the unit’s built-in clock is also set automatically.
Filename [DR-M1E_11Subsidiary.fm] Masterpage:Right-No-Heading DR-M1E_01.book Page 105 Friday, August 15, 2003 8:15 PM EN D Set Just Clock. The default setting is “OFF”. A Press rt to select “JUST CLOCK”, then press ENTER. B Press rt to set to the desired mode, then press ENTER. ● For the Just clock function, refer to “Just Clock” on page 104. ● If you set to “OFF”, you can disregard the next step as you won’t be able to receive regular clock adjustments.
Filename [DR-M1E_11Subsidiary.fm] Masterpage:Left+ DR-M1E_11Subsidiary.fm Page 106 Thursday, August 28, 2003 5:24 PM 106 EN Format a disc SUBSIDIARY SETTINGS (cont.) Format a DVD-RAM disc A Access the Main Menu screen. Press SET UP. Some DVD-RAM/RW discs are unformatted. Format the disc when you use an unformatted disc or you want to delete all recordings and data on the disc. ATTENTION: ● When a disc is formatted, all recordings and data are erased. It is impossible to restore them.
Filename [DR-M1E_11Subsidiary.fm] Masterpage:Right-No-Heading DR-M1E_01.book Page 107 Friday, August 15, 2003 8:15 PM EN Finalise a disc Finalising DVD-R/RW discs recorded on this unit makes it possible for the discs to be played back on other DVD players. DVD-RW discs are finalised in the mode that the discs were formatted, enabling playback on compatible DVD players. Titles input in the Library Database DVD Navi are registered as titles in the DVD menu. (墌 pg. 30, 68) ● Turn on the unit.
Filename [DR-M1E_11Subsidiary.fm] Masterpage:Left+ DR-M1E_11Subsidiary.fm Page 108 Thursday, August 28, 2003 5:26 PM 108 EN SUBSIDIARY SETTINGS (cont.) Scan Mode Set A Set the scan mode. You can select the scan mode from two modes: Interlaced scan mode which is used in the conventional TV system, and Progressive scan mode which enables reproduction of higher-quality images. For details, refer to “GLOSSARY” (墌 pg. 113).
Filename [DR-M1E_11Subsidiary.fm] Masterpage:Right0 DR-M1E_01.book Page 109 Friday, August 15, 2003 8:15 PM EN TROUBLESHOOTING 109 Before requesting service for a problem, use this chart and see if you can solve the trouble yourself. Small problems are often easily solved, and this can save you the trouble of sending your unit off for repair. GENERAL SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION 1. No power is supplied to the unit. ● The AC power plug is disconnected from the mains.
Filename [DR-M1E_11Subsidiary.fm] Masterpage:Left+ DR-M1E_01.book Page 110 Friday, August 15, 2003 8:15 PM 110 EN TROUBLESHOOTING (cont.) RECORDING SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION 1. The desired programme cannot be recorded. ● The channel position does not correspond to that in the receiving area. Set the correct channel position for the receiving broadcast. (墌 pg. 98) 2. Recording cannot be made. ● No disc or a disc not being compatible with the unit is loaded.
Filename [DR-M1E_11Subsidiary.fm] DR-M1E_01.book Page 111 Friday, August 15, 2003 8:15 PM Masterpage:Right-No-Heading EN 111 ON-SCREEN MESSAGES MESSAGE DESCRIPTION MEMORY IS FULL NOTHING MORE CAN BE REGISTERED IN THE LIBRARY IF YOU DELETE UNNECESSARY TITLE INFORMATION, YOU CAN THEN REGISTER ADDITIONAL INFORMATION The memory is full for registration for the Navigation system. The recording cannot be started even though the capacity for the recording is enough. (墌 pg.
Filename [DR-M1E_11Subsidiary.fm] Masterpage:Left+ DR-M1E_01.book Page 112 Friday, August 15, 2003 8:15 PM 112 EN TROUBLESHOOTING (cont.) ON-SCREEN MESSAGES (cont.) MESSAGE DESCRIPTION PRESS [STOP] AGAIN TO STOP RECORDING During Live Memory playback, 8 has been pressed. (墌 pg. 38) TIMER RECORDING COMPLETED Timer recording has finished during Live Memory playback.
Filename [DR-M1E_11Subsidiary.fm] Masterpage:Right0 DR-M1E_01.book Page 113 Friday, August 15, 2003 8:15 PM EN GLOSSARY 113 8 Aspect ratio 8 Multiangle The ratio of vertical and horizontal sizes of a displayed image. The horizontal vs. vertical ratio of conventional TVs is 4:3, and that of wide-screens is 16:9. By recording multiple scenes progressing at the same time in a single title, the user can select view angles. This feature is called the multiangle function.
Filename [DR-M1E_11Subsidiary.fm] Masterpage:Left0 DR-M1E_11Subsidiary.fm Page 114 Friday, August 22, 2003 11:37 AM 114 EN GENERAL Power requirement : AC 220 V – 240 Vd, 50 Hz/60 Hz Power consumption Power on : 34 W Power off : 18.5 W Temperature Operating : 5°C to 40°C Storage : –20°C to 60°C Operating position : Horizontal only Dimensions (WxHxD) : 435 mm x 70 mm x 346 mm Weight : 4.5 kg VIDEO/AUDIO Pickup CD Wavelength : 780 nm Maximum output power : 0.
Filename [DR-M1E_01IX.fm] Masterpage:Right0 DR-M1E_01IX.fm Page 115 Thursday, August 28, 2003 5:31 PM EN LIST OF TERMS 115 A R A-B Repeat Playback ............................................ 42 Adjusting the picture quality .................................. 46 Angle Selection .................................................... 33 Audio Channel Selection ....................................... 34 Audio Language/Sound Selection ........................... 33 AUDIO OUTPUT ............................
Filename [DR-M1E_13Cov4.fm] DR-M1E_13Cov4.
