OperationManual

ManualsBrandsJVC ManualsProjectorsHigh-brightness native 4K / 8K e-shift Visualization Series Projector (without lens) DLA-VS4800

Table Of Contents

PROJECTOR

DLA-VS4800G

INSTRUCTIONS

(Lens is optional)

LCT2370-004C

Getting Started Connection and

Installation

Network Settings Operation and

Settings

Others

Thank you for purchasing this JVC product.

Please study this instruction manual carefully before

starting to operate the unit, in order to use the unit correctly.

We take no responsibility for any problems resulting from

misuse of this unit by operating this equipment other than

instructed in this manual.

For Customer use :

Enter below the serial No. which is

located on the bottom side of the

cabinet. Retain this information for

future reference.

Model No. DLA-VS4800G

Serial No.

DLA-VS4800_EN.book 1 ページ２０１７年２月２８日　火曜日　午後１時５０分

Summary of content (72 pages)

PAGE 1
DLA-VS4800_EN.book 1 ページ２０１７年２月２８日火曜日午後１時５０分 Getting Started DLA-VS4800G INSTRUCTIONS Connection and Installation PROJECTOR Network Settings Operation and Settings (Lens is optional) Thank you for purchasing this JVC product. For Customer use : Enter below the serial No. which is located on the bottom side of the cabinet. Retain this information for future reference. Model No. DLA-VS4800G Serial No.
PAGE 2
DLA-VS4800_EN.book 2 ページ２０１７年２月２８日火曜日午後１時５０分 Getting Started Safety Precautions MACHINE NOISE INFORMATION (Germany only) Changes Machine Noise Information Ordinance 3. GSGV, January 18, 1991: The sound pressure level at the operator position is equal or less than 70 dB (A) according to ISO 7779. IMPORTANT INFORMATION This product has a High Intensity Discharge (HID) lamp that contains mercury. Disposal of these materials may be regulated in your community due to environmental considerations.
PAGE 3
DLA-VS4800_EN.book 3 ページ２０１７年２月２８日火曜日午後１時５０分 - Slots and openings in the cabinet are provided for ventilation. These ensure reliable operation of the product and protect it from overheating. These openings must not be blocked or covered. (The openings should never be blocked by placing the product on bed, sofa, rug, or similar surface.
PAGE 4
DLA-VS4800_EN.book 4 ページ２０１７年２月２８日火曜日午後１時５０分 Getting Started Safety Precautions (Cont’d) POWER CONNECTION For USA and Canada only Use only the following power cord. Power cord The power supply voltage rating of this product is AC110V – AC240V. Use only the power cord designated by our dealer to ensure Safety and EMC. Ensure that the power cable used for the projector is the correct type for the AC outlet in your country. Consult your product dealer.
PAGE 5
DLA-VS4800_EN.book 5 ページ２０１７年２月２８日火曜日午後１時５０分 EMC Supplement - This equipment is in conformity with the provisions and protection requirements of the corresponding European Directives. This equipment is designed for professional projector appliances and can be used in the following environments. ● Controlled EMC environment (for example purpose built broadcasting or recording studio), and the rural outdoors environment (far away from railways, transmitters, overhead power lines, etc).
PAGE 6
DLA-VS4800_EN.book 6 ページ２０１７年２月２８日火曜日午後１時５０分 Getting Started DEUTSCH Benutzerinformationen zur Entsorgung alter Geräte Hinweis: NEDERLANDS Informatie voor gebruikers over het weggooien van oude apparatuur Let op: Dieses Symbol ist nur in der Europäischen Uniongültig. Dit symbool is alleen geldig in de Europese Unie. [Europäische Union] Dieses Symbol zeigt an, dass das elektrische bzw. elektronische Gerät nicht als normaler Haushaltsabfall entsorgt werden soll.
PAGE 7
DLA-VS4800_EN.book 7 ページ２０１７年２月２８日火曜日午後１時５０分 ΕΛΛΗΝΙΚΑ ITALIANO Informazioni per gli utenti sullo smaltimento delle apparecchiature obsolete Πληροφορίες σχετικά µε την απόρριψη εξοπλισµού Προσοχή: Attenzione: Αυτή η σήµανση ισχύει µόνο για την Ευρωπαϊκή Ένωση. Questo simbolo è valido solo nell’Unione Europea.
PAGE 8
DLA-VS4800_EN.book 8 ページ２０１７年２月２８日火曜日午後１時５０分 Getting Started SUOMI Tietoja käyttäjille vanhojen laitteiden hävittämisestä NORSK Informasjon til brukerne om kassering av gammelt utstyr Huomio: OBS! Tämä symboli on voimassa vain Euroopan unionissa. Dette symbolet er kun gyldig i den Europeiske Union og i EFTA-landene Norge, Island og Sveits.
PAGE 9
DLA-VS4800_EN.book 9 ページ２０１７年２月２８日火曜日午後１時５０分 POLSKI Informacja dla użytkowników, dotycząca utylizacji niesprawnych urządzeń Uwaga: MAGYAR Felhasználói tájékoztató az elhasznált berendezések ártalmatlanításáról Figyelem! Taki symbol jest ważny tylko w Unii Europejskej. Ez a szimbólum csak az Európai Unióban érvényes.
PAGE 10
DLA-VS4800_EN.book 10 ページ２０１７年２月２８日火曜日午後１時５０分 Getting Started Contents Getting Started Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Precautions During Use . . . . . . . . . . . . . . . . . . . . . . 11 Names and Functions of Parts . . . . . . . . . . . . . . . . . 12 Connection and Installation Installation . .
PAGE 11
DLA-VS4800_EN.book 11 ページ２０１７年２月２８日火曜日午後１時５０分 Precautions During Use Maintenance Procedures oClean dirt on the cabinet Do this with a soft cloth. In case of heavy soiling, soak a cloth in neutral detergent diluted with water, wring dry and wipe, followed by wiping again using a dry cloth.
PAGE 12
DLA-VS4800_EN.book 12 ページ２０１７年２月２８日火曜日午後１時５０分 Getting Started Names and Functions of Parts Front/Right/Rear Side F G Intake air A H Exhaust air Exhaust air L TRO CON Intake air Intake air B C D E F F A Air Inlet/Filter D Lens Mounting Bracket The air inlets absorb air to cool the interior of the projector. A filter is mounted inside the projector to remove dirt in the air that enters through the inlets. Clean the filter regularly. (A Page 58) Mount the optional projection lens.
PAGE 13
DLA-VS4800_EN.book 13 ページ２０１７年２月２８日火曜日午後１時５０分 Right Side I J DVI 1 e-shift Sync DVI 2 CONTROL USB DVI 3 LAN OPERATE I/B STANDBY/ON LAMP DVI 4 WARNING RS-232C KLM NOP Q R S I [e-shift Sync] Terminal P [LAMP] Indicator This is an input terminal for e-shift sync signal. This indicator lights up in yellow when the lamp time exceeds 1900 hours. J [DVI 1 to 4] Terminal This is an input terminal for video signals. Connect it to the video output terminal of the computer.
PAGE 14
DLA-VS4800_EN.book 14 ページ２０１７年２月２８日火曜日午後１時５０分 Connection and Installation Installation Please read the following carefully when installing this unit. Optional Projection Lens Mount the optional projection lens (A Page 60). For details on mounting the lens, please consult your authorized dealer. Minimum Space Required Do not use a cover that may enclose this unit or block the air inlets/vent holes. Allow sufficient space around this unit.
PAGE 15
DLA-VS4800_EN.book 15 ページ２０１７年２月２８日火曜日午後１時５０分 Projector Installation Angle You can install this projector between 90 . Images will be properly displayed if the horizontal angle is between the range of 5 . However, you have to configure using [Installation Style](A Page 48) for certain installation orientations.
PAGE 16
DLA-VS4800_EN.book 16 ページ２０１７年２月２８日火曜日午後１時５０分 Connection and Installation Installing the Projector and Screen (Cont’d) Movable Range of Projected Image GL-MS4015SZG Zoom lens GL-MS4016SZG Zoom lens GL-MS4021SZG Zoom lens When shift amount in the right direction is +25 % Install the projector such that the center of the lens is aligned with the 1/4 position from the left edge of the screen.
PAGE 17
DLA-VS4800_EN.book 17 ページ２０１７年２月２８日火曜日午後１時５０分 Overlaying projected images (when zoom lens is in use) Projecting images by stacking projectors When light passes through the glass of projection booth The lens shift feature enables you to use up to three stacked projectors at the same time. Stacking the projectors enhances the brightness level, and helps to project images that are sufficiently bright even when the venue is relatively big or bright.
PAGE 18
DLA-VS4800_EN.book 18 ページ２０１７年２月２８日火曜日午後１時５０分 Connection and Installation Installing the Projector and Screen (Cont’d) Screen Size and Projection Distance Adjust the distance from the lens to the screen to achieve your desired screen size. GL-MS4015SZG/GL-MS4016SZG/GL-MS4021SZG Zoom lens Projection distance Projection Screen Size (Diagonal Length) Image Width GL-MS4015SZG GL-MS4016SZG GL-MS4021SZG Tele End Wide End Tele End Wide End Tele End Wide End 50" (Approx. 1.27 m) 1.
PAGE 19
DLA-VS4800_EN.book 19 ページ２０１７年２月２８日火曜日午後１時５０分 GL-MS4011SG Short focal length lens Projection Screen Size (Diagonal Length) Image Width Projection distance 50" (Approx. 1.27 m) 1.10 m 1.16 m 60" (Approx. 1.52 m) 1.31 m 1.41 m 70" (Approx. 1.78 m) 1.53 m 1.66 m 80" (Approx. 2.03 m) 1.75 m 1.91 m 90" (Approx. 2.29 m) 1.97 m 2.16 m 100" (Approx. 2.54 m) 2.19 m 2.41 m 110" (Approx. 2.79 m) 2.41 m 2.66 m 120" (Approx. 3.05 m) 2.63 m 2.91 m 130" (Approx. 3.30 m) 2.85 m 3.
PAGE 20
DLA-VS4800_EN.book 20 ページ２０１７年２月２８日火曜日午後１時５０分 Connection and Installation Connecting Video Signals of the Computer Connection During Single-Screen Mode Display The single-screen mode displays signals (up to four signals) from a computer as a single video image. To select to the single-screen mode, set ADisplay ModeB in the Setting menu to ASingleB.
PAGE 21
DLA-VS4800_EN.book 21 ページ２０１７年２月２８日火曜日午後１時５０分 Normal 2 Stripes DVI 1 DVI 1 DVI 3 4 Stripes DVI 1 DVI 2 Cross DVI 3 DVI 4 DVI 1 DVI 2 DVI 3 DVI 4 Connection During Single-Screen Mode Display Below is the connection example for four-channel signals from the computer. For two-channel signals from the computer, connect to the [DVI 1] and [DVI 3] terminals of this projector.
PAGE 22
DLA-VS4800_EN.book 22 ページ２０１７年２月２８日火曜日午後１時５０分 Connection and Installation Connecting Video Signals of the Computer (Cont’d) Connection During Two-Screen/ Four-Screen Mode Display The two-screen/four-screen mode enables simultaneous display of signals from two or four computers. To select the two-screen mode, set ADisplay ModeB in the Setting menu to ADoubleB. To select the four-screen mode, set ADisplay ModeB to ACrossB.
PAGE 23
DLA-VS4800_EN.
PAGE 24
DLA-VS4800_EN.book 24 ページ２０１７年２月２８日火曜日午後１時５０分 Network Settings Connection Using a LAN Cable Specifications of PC for Controlling this Projector OS Windows XP Professional SP2 / Windows XP Home Edition SP2 / Windows 7 Ultimate / Windows 7 Professional / Windows 7 Home Premium CPU Pentium3 1 GHz or higher Memory 256 MB and above Connect this projector, the computer for controlling this projector, and the switching hub using LAN cables, followed by configuring the network.
PAGE 25
DLA-VS4800_EN.book 25 ページ２０１７年２月２８日火曜日午後１時５０分 Turning On the Main Power 1 Check to ensure that this projector, computer, and switching hub are properly connected 2 Connect the power cord to the power input terminal of this projector 5 CAUTION: 2 Power Cord (Supplied) 3 ● Do not connect the power cord when a lens (optional) is not attached. You can secure the power cord to this projector. A Attach the plug holder to the power cord.
PAGE 26
DLA-VS4800_EN.book 26 ページ２０１７年２月２８日火曜日午後１時５０分 Network Settings IP Address Settings Set the IP address for this projector. There are 2 methods to set the IP address. Assigning a static IP address Assigning an IP address from the DHCP Server Assigning a static IP address The AIP Address SettingB of this projector is set to ASTATIC IPB (the DHCP client function is OFF) by default. Upon turning on the power, this projector starts running with the following IP address.
PAGE 27
DLA-VS4800_EN.
PAGE 28
DLA-VS4800_EN.book 28 ページ２０１７年２月２８日火曜日午後１時５０分 Network Settings 7 Click AAdmin.NetworkB in the main menu IP Address Settings (Cont’d) host PJ-1 user: advanced Logout Main Image Setting Assign Convergence Assigning a static IP address (Cont’d) Lens Option Admin.Network 4 Enter Ahttp://192.168.0.2B in the address field of the Internet Explorer, and click AGoB Admin.E-Mail Admin.Option Admin.Signal ● A login screen for this projector appears.
PAGE 29
DLA-VS4800_EN.book 29 ページ２０１７年２月２８日火曜日午後１時５０分 Assigning IP Address from the DHCP Server Using the Mail Delivery Feature The IP address is automatically assigned by the DHCP server. 1 After connecting, turn on the main power ● Refer to Page 24 on the details of connection. ● Refer to Page 25 on procedures to turn on the main power. 2 Set the ADHCP ClientB setting of this projector to ADHCPB ● The ADHCP ClientB of this projector is set to ASTATIC IPB (the DHCP client function is OFF) by default.
PAGE 30
DLA-VS4800_EN.book 30 ページ２０１７年２月２８日火曜日午後１時５０分 Operation and Settings 3 Adjust the zoom ratio (screen size) (when Projecting Image zoom lens is in use) You can adjust the focus using the AZoomB item of the Lens menu. host PJ-1 user: root Logout If setting for this projector is not completed, refer to AUser Settings MenuB(A Page 33) upon turning on the power and configure the settings accordingly.
PAGE 31
DLA-VS4800_EN.book 31 ページ２０１７年２月２８日火曜日午後１時５０分 5 Adjust the focus 8 Turn the main power at the rear of the You can adjust the focus using the AFocusB item of the Lens menu. To move the focus point closer: B (Far) end of AFocusB NOTE: ● The focus changes each time you click on the inner buttons ( / ). (Fine control) The outer buttons ( / ) change the focus when they are depressed.
PAGE 32
DLA-VS4800_EN.book 32 ページ２０１７年２月２８日火曜日午後１時５０分 Operation and Settings 3 Click ALOGINB Displaying the Menu ● The main menu for this projector appears. NOTE: 1 Enter the IP address assigned in the address field of the Internet Explorer, and click AGoB (A Page 28) ● Example: When IP address assigned is A192.168.0.2B, enter Ahttp://192.168.0.2B. http://192.168.0.
PAGE 33
DLA-VS4800_EN.book 33 ページ２０１７年２月２８日火曜日午後１時５０分 User Settings Menu After installation and connection are complete, perform the necessary adjustment and setting. Operate the menus using the computer’s browser to make adjustments and configure settings.
PAGE 34
DLA-VS4800_EN.book 34 ページ２０１７年２月２８日火曜日午後１時５０分 Operation and Settings User Settings Menu (Cont’d) (1) Main Menu This menu displays the ON/OFF status of the power supply and information on signals input to the projector.
PAGE 35
DLA-VS4800_EN.book 35 ページ２０１７年２月２８日火曜日午後１時５０分 indicates the factory default. Item Power Setting Value ON OFF Description For turning on/off the lamp selected in ALamp ModeB. ON : Turns on the lamp. OFF : Turns off the lamp. NOTE: ● The following operating modes of the projector are displayed to the right of the OFF button.
PAGE 36
DLA-VS4800_EN.book 36 ページ２０１７年２月２８日火曜日午後１時５０分 Operation and Settings User Settings Menu (Cont’d) (1) Main Menu (Cont’d) indicates the factory default. Item Signal Status DVI Rate(Hz) Pixel H Pixel V Link Setting Value ^ ^ ^ ^ ^ Description Displays information on the input signals. DVI : Displays the DVI input terminal number. Rate(Hz) : Displays the vertical frequency. Pixel H : Displays the horizontal resolution. Pixel V : Displays the vertical resolution.
PAGE 37
DLA-VS4800_EN.book 37 ページ２０１７年２月２８日火曜日午後１時５０分 (2) Image Menu This menu is used for adjusting the picture quality. host PJ-1 user: root Logout Main Brightness Image Setting Red -30 Green -30 Blue -30 Red -30 Green -30 Blue -30 0 0 Convergence Lens 0 +30 +30 +30 Option Contrast 0 0 0 Gamma A +30 +30 +30 Hide B C OFF ON indicates the factory default.
PAGE 38
DLA-VS4800_EN.book 38 ページ２０１７年２月２８日火曜日午後１時５０分 Operation and Settings User Settings Menu (Cont’d) (3) Setting Menu This menu is used for specifying the input level of the terminal and the display mode. host PJ-1 user: root Logout Main Input Level Image 0-255(PC) Setting Display Mode 16-235 Convergence 1 1 3 Lens 1 2 3 4 Option Single Double Cross indicates the factory default.
PAGE 39
DLA-VS4800_EN.book 39 ページ２０１７年２月２８日火曜日午後１時５０分 (4) Convergence Menu This menu is used for correcting color shifts in the optical system. host PJ-1 user: root Logout Main Red Blue U Image U Setting Convergence Lens L R L R Option D D Test Pattern OFF OFF SET indicates the factory default. Item Setting Value Description Red ^ For adjusting the horizontal/vertical position of red and blue colors on the image. Blue ^ NOTE: ● The green color value is fixed.
PAGE 40
DLA-VS4800_EN.book 40 ページ２０１７年２月２８日火曜日午後１時５０分 Operation and Settings User Settings Menu (Cont’d) (5) Lens Menu This menu is used for adjusting the projection lens. host PJ-1 user: root Logout Zoom Main Image Focus w Shift + U Setting Convergence Lens L R _ Option T D Test Pattern OFF Item Zoom OFF Setting Value ^ SET Description For adjusting the zoom ratio (screen size). NOTE: ● The zoom position changes each time the inner button is clicked.
PAGE 41
DLA-VS4800_EN.book 41 ページ２０１７年２月２８日火曜日午後１時５０分 (6) Option Menu This menu is used for specifying settings for the method of screen display, lamp brightness and others. host PJ-1 user: root Logout Main Flip Horz. Image ON OFF Vert. ON OFF Setting Convergence Lamp Power High Lens Option Back Color Low Blue Black Message Display ON OFF Test Pattern OFF OFF SET indicates the factory default. Item Flip Horz. Vert.
PAGE 42
DLA-VS4800_EN.
PAGE 43
DLA-VS4800_EN.book 43 ページ２０１７年２月２８日火曜日午後１時５０分 Administrator Settings Menu After installation and connection are complete, perform the necessary adjustment and setting. Operate the menus using the computer’s browser to make adjustments and configure settings. Administrator Settings Menu Structure For details on page menu (1) to (6), refer to AUser Settings MenuB (A Page 33 to 41).
PAGE 44
DLA-VS4800_EN.book 44 ページ２０１７年２月２８日火曜日午後１時５０分 Operation and Settings Administrator Settings Menu (Cont’d) (7) Admin.Network Menu For configuring the network settings. host PJ-1 user: advanced Logout Host Name Setting Main Host Name Image PJ ZZZZZZ SET Setting Convergence IP Address Setting DHCP Client Lens Option Admin.Network Admin.Mail DHCP STATIC IP IP Address 192.168.1.100 Subnet Mask 255.255.255.0 Default Gateway 192.168.1.1 Admin.Option Admin.
PAGE 45
DLA-VS4800_EN.book 45 ページ２０１７年２月２８日 Item User Login Name/ Password Change User Name New Password Confirm New Password Initialize 火曜日午後１時５０分 Setting Value Description For changing the login name and password. User Name : For changing the login name. root ^ ^ New Password : For changing the login password. Confirm New Password : Re-enter the new password. (For confirmation) ^ Initialize : For resetting the username/password. NOTE: ● You can change it to a random name.
PAGE 46
DLA-VS4800_EN.book 46 ページ２０１７年２月２８日火曜日午後１時５０分 Operation and Settings Administrator Settings Menu (Cont’d) (8) Admin.E-mail Menu This menu is for configuring the mail settings, which sends out an error message to the computer of the preset address when an abnormality occurs within this projector. host PJ-1 user: advanced Logout Main E-Mail Setting Image E-Mail Setting E-Mail Sender user@localhost E-Mail Address user@localhost ON OFF Convergence Lens Option Admin.Network Admin.
PAGE 47
DLA-VS4800_EN.book 47 ページ２０１７年２月２８日火曜日午後１時５０分 indicates the factory default. Item Setting Value E-Mail Setting E-Mail Description For configuring the e-mail feature. ON Q OFF ON : Use the mail feature. OFF : Do not use the mail feature. E-Mail Sender ^ (Default Value: lower 3 bytes of the MAC address) For specifying the destination e-mail address of this projector. E-Mail Address ^ (Default Value: user@localhost) For specifying the destination e-mail address. ^ (Default Value: 1.1.
PAGE 48
DLA-VS4800_EN.book 48 ページ２０１７年２月２８日火曜日午後１時５０分 Operation and Settings Administrator Settings Menu (Cont’d) (9) Admin.Option Menu This menu is used for specifying settings including image and option, and for resetting the lamp. host PJ-1 user: advanced Logout Main Color Depth 8bit Image Setting Frame Lock 12bit ON Mech. Shutter OFF High Altitude Convergence ON Lens Option OFF ON OFF Installation Style Admin.Network A B C Admin.E-Mail Admin.Option Admin.
PAGE 49
DLA-VS4800_EN.book 49 ページ２０１７年２月２８日火曜日午後１時５０分 (10) Admin.Signal Menu This menu is for configuring settings such as display format, and for rewriting EDID. host PJ-1 user: advanced Logout Force Signal Main OFF Image Setting SET OFF Convergence Signal Status Lens DVI Rate(Hz) Pixel H Pixel V Link Option 1 60.00 2048 2400 Dual Admin.Network 2 60.00 2048 2400 Dual Admin.E-Mail 3 Admin.Option 4 Admin.
PAGE 50
DLA-VS4800_EN.book 50 ページ２０１７年２月２８日火曜日午後１時５０分 Operation and Settings Administrator Settings Menu (Cont’d) (10) Admin.Signal Menu (Cont’d) indicates the factory default. Item Signal Status DVI Rate(Hz) Pixel H Pixel V Link Setting Value ^ ^ ^ ^ ^ Description Displays information on the input signals. Same as ASignal StatusB in the User Menu. DVI : Displays the DVI input terminal number. Rate(Hz) : Displays the vertical frequency. Pixel H : Displays the horizontal resolution.
PAGE 51
DLA-VS4800_EN.book 51 ページ２０１７年２月２８日火曜日午後１時５０分 Others Troubleshooting Check the following points before sending this product for repair. The following phenomena are not malfunctions. If there is no abnormality on the screen when the phenomena below appear, they are not malfunctions.
PAGE 52
DLA-VS4800_EN.book 52 ページ２０１７年２月２８日火曜日午後１時５０分 Others Troubleshooting (Cont’d) Symptom Probable Cause Corrective Action Reference Page ● Is the projector out of focus? ● Adjust the focus using AFocusB of the Lens menu. A Page 31, 40 ● Is the projection distance too short or too long? ● Set it to a correct distance. A Page 18, 19 Image is unusually dark or bright ● Is the brightness level properly adjusted? ● Adjust accordingly using ABrightnessB of the Image menu.
PAGE 53
DLA-VS4800_EN.book 53 ページ２０１７年２月２８日火曜日午後１時５０分 What to do when these messages are displayed Messages are displayed when the lamp life has expired and when there is input of signals that cannot be used. Message Lamp Time Over Message Lamp Time Over Out of Range No Input Cause (Details) ● Displayed when the lamp time has exceeded 2000 hours. The message is displayed for a period of 3 minutes during each projection. Replace with a new lamp unit.
PAGE 54
DLA-VS4800_EN.book 54 ページ２０１７年２月２８日火曜日午後１時５０分 Others Warnings Using Indicators The lamp time and warning mode are indicated using the indicator. For indicator displays during normal operation, refer to the note below. Indicator No. STANDBY/ ON LAMP Description WARNING About time to replace lamp (Lamp time has exceeded 1900 hours.) 1 *1 Light On (Yellow) - *2 Blinking (Yellow) Light On (Red) 2 3 4 When the lamp life has expired (Lamp time has exceeded 2000 hours. Message displayed.
PAGE 55
DLA-VS4800_EN.book 55 ページ２０１７年２月２８日火曜日午後１時５０分 Warning Status The latest error code (Warning Status) appears in the Main Menu when an abnormality occurs in the projector. Error details are as follows: Error Code 1 2 6 8 9 A 15 30 31 32 33 40 41 42 43 44 45 46 47 48 49 4A 50 51 52 56 Meaning Lamp 1 does not turn on. Accumulated lamp time for Lamp 1 has exceeded 2000 hours. Lamp 1 goes off during projection. Abnormally high temperature in the projector.
PAGE 56
DLA-VS4800_EN.book 56 ページ２０１７年２月２８日火曜日午後１時５０分 Others RS-232C Interface You can control this projector via a computer by connecting the computer to this unit using a RS-232C cross cable (D-sub 9 pins). The commands to control this unit and the response data format against the received commands are explained here. For details, please consult your authorized dealer.
PAGE 57
DLA-VS4800_EN.book 57 ページ２０１７年２月２８日火曜日午後１時５０分 Parameters used for the data format The following 2 types of parameters are used for command and response data: (1) ON/OFF (2) Special Parameter Each parameter is as follows: (1) ON/OFF Shows the status (ON or OFF) of the unit, such as POWER and HIDE.
PAGE 58
DLA-VS4800_EN.book 58 ページ２０１７年２月２８日火曜日午後１時５０分 Others Maintenance Turn off the power of the projector unit, and unplug the power cord when cleaning or replacing the filter. Cleaning and Replacing the Filter Clean the filter regularly. If the filter is soiled, air intake efficiency may deteriorate, thus resulting in malfunction of the product. Replace with a new one if the filter fails to remove dust thoroughly or if it is damaged.
PAGE 59
DLA-VS4800_EN.book 59 ページ２０１７年２月２８日火曜日午後１時５０分 1 Remove the filter cover The filter is located at the front side of the projector unit. 2 Remove the sponge and filter Hold the center of the filter using your fingers, and pull the filter toward you to remove it. 3 Clean the sponge and filter Remove any dirt or dust using a vacuum cleaner. CAUTION: ● Do not clean using a flammable air duster. This may cause fire.
PAGE 60
DLA-VS4800_EN.book 60 ページ２０１７年２月２８日火曜日午後１時５０分 Others Specifications General Optional Items Power supply Projection lens AC 110 V to AC 240 V 50 Hz/60 Hz Power consumption 1100 W (Standby mode: 6 W) Current consumption Max 9.5 A Calorific power 3960 kJ/h (946 kcal/h) Air capacity Intake: Approx. 3 m3/min Exhaust: Approx.
PAGE 61
DLA-VS4800_EN.book 61 ページ２０１７年２月２８日火曜日午後１時５０分 Pin Arrangement RS-232C Terminal 5 9 6 1 Pin No. 2 3 5 1, 4, 6-9 Signal RxD TxD GND NC Action Incoming Data Outgoing Data Signal Ground ^ Signal Direction This Projector PC This Projector PC ^ ^ DVI-D Terminal 8 7 6 5 4 3 2 1 16 15 14 13 12 11 10 9 24 23 22 21 20 19 18 17 Pin No.
PAGE 62
DLA-VS4800_EN.book 62 ページ２０１７年２月２８日火曜日午後１時５０分 Others Specifications (Cont’d) Dimensional Outline Drawing (Unit: mm) 35 59.5 Side 30 Top 677 DVI 1 e-shift Sync 199 DVI 2 CONTROL USB DVI 3 LAN OPERATE I/B STANDBY/ON LAMP DVI 4 WARNING M10 hole (x 12) Tightening depth: 10 to 20 59.5 783 688 RS-232C (Projection lens 127 is optional) 660 30 Front Rear 494 660 26 to 46 330 342 to 362 Center of lens 181 133 156 43.
PAGE 63
DLA-VS4800_EN.book 63 ページ２０１７年２月２８日火曜日午後１時５０分 Others GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it.
PAGE 64
DLA-VS4800_EN.book 64 ページ２０１７年２月２８日火曜日午後１時５０分 These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works.
PAGE 65
DLA-VS4800_EN.book 65 ページ２０１７年２月２８日火曜日午後１時５０分 8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded.
PAGE 66
DLA-VS4800_EN.book 66 ページ２０１７年２月２８日火曜日午後１時５０分 ************************************************** GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL.
PAGE 67
DLA-VS4800_EN.book 67 ページ２０１７年２月２８日火曜日午後１時５０分 GNU LESSER GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License. DISTRIBUTION AND MODIFICATION 0.
PAGE 68
DLA-VS4800_EN.book 68 ページ２０１７年２月２８日火曜日午後１時５０分 If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place satisfies the requirement to distribute the source code, even though third parties are not compelled to copy the source along with the object code. 5.
PAGE 69
DLA-VS4800_EN.book 69 ページ２０１７年２月２８日火曜日午後１時５０分 9. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept this License.
PAGE 70
DLA-VS4800_EN.book 70 ページ２０１７年２月２８日火曜日午後１時５０分 How to Apply These Terms to Your New Libraries If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License). To apply these terms, attach the following notices to the library.
PAGE 71
DLA-VS4800_EN.
PAGE 72
DLA-VS4800_EN.