ENGLISH CONTENTS DIGITAL VIDEO CAMERA AUTOMATIC DEMONSTRATION 5 GETTING STARTED 6 – 11 RECORDING GR-DVL105 Please visit our Homepage on the World Wide Web and answer our Consumer Survey (in English only): http://www.jvc-victor.co.jp/english/index-e.html 12 – 28 Basic Recording ................................. 12 Advanced Features ............................ 19 PLAYBACK 29 – 35 Basic Playback .................................. Advanced Features ............................ Basic Connections ......
EN Dear Customer, Thank you for purchasing this digital video camera. Before use, please read the safety information and precautions contained in the following pages to ensure safe use of this product. Using This Instruction Manual •All major sections and subsections are listed in the Table Of Contents on the cover page. •Notes appear after most subsections. Be sure to read these as well. •Basic and advanced features/operation are separated for easier reference. It is recommended that you . . . ....
EN 3 When the equipment is installed in a cabinet or on a shelf, make sure that it has sufficient space on all sides to allow for ventilation (10 cm or more on both sides, on top and at the rear). Do not block the ventilation holes. (If the ventilation holes are blocked by a newspaper, or cloth etc. heat may not be able to get out.) No naked flame sources, such as lighted candles, should be placed on the apparatus.
PROVIDED ACCESSORIES EN •AC Power Adapter/Charger AA-V40A/AS •Shoulder Strap •Audio/Video Cable (ø3.5 mini-plug to RCA plug) •Core Filter (for optional S-Video cable) •Remote Control Unit RM-V716U •AAA (R03) Battery x 2 (for remote control unit) •Editing Cable Both plugs have 1 ring around the pin.
EN 5 How To Attach The Core Filter Attach the provided Core Filter to an optional S-Video cable, the PC connection cable provided with optional HS-V14KIT software. The Core Filter reduces interference. 1 2 3 3 cm Stopper Wind once Release the stoppers on both ends of the Core Filter. Run the cable through the Core Filter, leaving approx. 3 cm of cable between the cable plug and the Core Filter. Wind the cable once around the outside of the Core Filter as shown in the illustration.
GETTING STARTED EN Power To AC outlet Battery pack BN-V408U, BN-V416U or BN-V428U CHARGING THE BATTERY PACK AC Power Adapter/Charger POWER indicator This camcorder’s 2-way power supply system lets you choose the most appropriate source of power. Do not use provided power supply units with other equipment. DC OUT connector 1 Make sure you unplug the camcorder’s DC cord from the AC Power Adapter/Charger. Plug the AC Adapter/ Charger’s power cord into an AC outlet. The POWER indicator lights.
EN 7 USING THE BATTERY PACK BATTERY RELEASE Button 1 3 1 2 2 Tilt the viewfinder upward 1. With the arrow on the battery pack pointing downward, push the battery pack slightly against the battery pack mount 2, then slide down the battery pack until it locks in place 3. •If the battery pack is attached with its mark set in the wrong direction, a malfunction may occur. To Detach The Battery Pack . . . ....
GETTING STARTED (cont.) EN Grip Adjustment 1 2 3 Power Zoom Lever Recording Start/Stop button Separate the Velcro strip. Pass your right hand through the loop and grasp the grip. Adjust so that your thumb and fingers can easily operate the Recording Start/Stop Button and Power Zoom Lever. Refasten the Velcro strip. Power Switch Viewfinder Adjustment Dioptre Adjustment Control 1 Set the Power Switch to “ ” or “ ” while pressing down the Lock Button located on the switch.
EN 9 Date/Time Settings MENU/BRIGHT Wheel The date/time is recorded onto the tape at all times, but its display can be turned on or off during playback (墌 pg. 30). Power Switch Power lamp OFF Lock Button PLAY Display FAD E R / W I P E 4 W I P E – S CRO L L W I P E – S HU T T E R RANDOM OF F F AD E R –WH I T E F AD E R – B L ACK F AD E R –MOS A I C D I S P L A Y MENU DISPLAY MENU 1R E T URN ON S CR E E N DA T E / T I ME T I ME COD E C L OCK AD J. 1. 1.
GETTING STARTED (cont.) EN Erase protection tab* Loading/Unloading A Cassette The camcorder needs to be powered up to load or eject a cassette. Cassette holder Make sure the window side is facing out. 1 Slide and hold OPEN/EJECT in the direction of the arrow then pull the cassette holder cover open until it locks. The cassette holder opens automatically. •Do not touch internal components. OPEN/EJECT Switch 2 Insert or remove a tape and press “PUSH HERE” to close the cassette holder.
EN 11 Recording Mode Setting MENU/BRIGHT Wheel Set the tape recording mode depending on your preference. Power Switch Power lamp OFF Lock Button PLAY Display CAME RA MENU 1R E T URN R E C MOD E SOUND MOD E Z OOM GA I N U P TAL L Y I D NUMB E R D EMO . MOD E SP LP Menu Screen Sub Menu 1 Set the Power Switch to “ ” while pressing down the Lock Button located on the switch. The power lamp lights and the camcorder is turned on. 2 3 4 Press MENU/BRIGHT. The Menu Screen appears.
RECORDING Basic Recording EN Power Switch Lock Button AY OFF PL Power lamp Recording Start/Stop Button NOTE: You should already have performed the procedures listed below. If not, do so before continuing. ● Power ( 墌 pg. 6) ● Grip Adjustment ( 墌 pg. 8) ● Viewfinder Adjustment ( 墌 pg. 8) ● Load A Cassette ( 墌 pg. 10) ● Recording Mode Setting ( 墌 pg.
EN 13 Power Switch Position (Manual) : Allows you to set various recording functions using the Menus. If you want more creative capabilities than Full Auto recording, try this mode. (Full Auto) : Allows you to record using NO special effects or manual adjustments. Suitable for standard recording. OFF : Allows you to switch off the camcorder. : Allows you to play back a recording on the tape. F . AUTO When the Power Switch is set to “ ”, “F. AUTO” appears. When set to “ ” or “ ”, there is no indication.
RECORDING Basic Recording (cont.) EN Power Switch Lock Button Snapshot This feature lets you record still images that look like photographs onto a tape. SNAPSHOT Button AY OFF PL SNAPSHOT MODE SELECTION MODE Button 1 2 Set the Power Switch to “ ” or “ ” while pressing down the Lock Button located on the switch. Choose the appropriate Snapshot mode from the 5 available by repeatedly pressing MODE until the desired snapshot mode indicator appears.
EN FRAME Snapshot mode with frame* FULL Snapshot mode with no frame* MULTI-4 Multi-Analyser 4 MULTI-9 Multi-Analyser 9 PIN-UP Pin-Up mode* * There is the sound effect of a shutter closing. 15 NOTES: ● Even if “MULTI-4” or “MULTI-9” is engaged, Snapshot recording will be performed in the FULL mode during Digital Zoom. ● If Snapshot recording is not possible, “PHOTO” blinks when SNAPSHOT is pressed. ● If Programme AE with special effects ( 墌 pg.
RECORDING Basic Recording (cont.) EN Zoom in (T: Telephoto) 1 xW FEATURE: Zooming PURPOSE: T 1 0 xW T 20xW T 40xW T To produce the zoom in/out effect, or an instantaneous change in image magnification. OPERATION: Zoom out (W: Wide angle) Zoom display 1 0 xW T Digital zoom zone 10X (optical) zoom zone Approximate zoom ratio Power Zoom Lever Power Switch Zoom In Slide the Power Zoom Lever towards “T”. Zoom Out Slide the Power Zoom Lever towards “W”.
EN 17 NOTE: Recording From The Middle Of A Tape Time Code During recording, a time code is recorded on the tape. This code is to confirm the location of the recorded scene on the tape during playback. If recording starts from a blank portion, the time code begins counting from “00:00:00” (minute:second:frame). If recording starts from the end of a previously recorded scene, the time code continues from the last time code number. To perform Random Assemble Editing (墌 pg. 43 – 48), time code is necessary.
RECORDING Basic Recording (cont.) EN FEATURE: Video Light PURPOSE: To brighten the scene when natural lighting is too dim. OPERATION: LIGHT OFF/AUTO/ON Switch (Open the LCD monitor to access this switch.) DANGER 䡲 The video light can become extremely hot. Do not touch it either while in operation or soon after turning it off, otherwise serious injury may result.
RECORDING Advanced Features Focus detection zone While focusing on a further subject EN 19 While focusing on a nearer subject FEATURE: Auto Focus PURPOSE: The camcorder’s Full Range AF system offers continuous shooting ability from close-up (as close as approx. 5 cm to the subject) to infinity. However, correct focus may not be obtainable in the situations listed below (in these cases use manual focusing): •When two subjects overlap in the same scene. •When illumination is low.
RECORDING Advanced Features (cont.) EN Power Switch MENU/BRIGHT Wheel OFF Lock Button PLAY Display FAD E R / W I P E 4 Menu Screen W I P E – S CRO L L W I P E – S HU T T E R RANDOM OF F F AD E R –WH I T E F AD E R – B L ACK F AD E R –MOS A I C CAME RA MENU 1R E T URN R E C MOD E SOUND MOD E Z OOM GA I N U P TAL L Y I D NUMB E R D EMO .
EN 21 Menu Screen Explanations FADER/WIPE Refer to “Fade/Wipe Effects” (墌 pg. 24, 25). P.AE/EFFECT Refer to “Programme AE With Special Effects” (墌 pg. 26). EXPOSURE Refer to “Exposure Control” and “Iris Lock” (墌 pg. 27). W.BALANCE Refer to “White Balance Adjustment” and “Manual White Balance Operation” (墌 pg. 28). REC MODE Allows you to set the recording mode (SP or LP) depending on your preference (墌 pg. 11).
EN Menu Screen Explanations (cont.) ON Demonstrates certain functions such as Programme AE with special effects, etc., and can be used to confirm how these functions operate. When “DEMO. MODE” is set to “ON” and the Menu Screen is closed, demonstration starts. Performing any operation during the demonstration stops the demonstration temporarily. If no operation is performed for more than 1 minute after that, the demonstration will resume.
DISPLAY MENU MANUAL MENU EN 23 ON Helps cut down on noise created by wind. “ sound will change. This is normal. OFF Disengages the function which cuts down on noise created by wind. CAM RESET CANCEL Does not reset all settings to the factory-preset. ON SCREEN LCD Keeps the camcorder’s display (except the date, time and time code) from appearing on the connected TV screen. LCD/TV Makes the camcorder’s display appear on screen when the camcorder is connected to a TV.
RECORDING Advanced Features (cont.) EN Fade/Wipe Effects These effects let you make pro-style scene transitions. Use them to spice up the transition from one scene to the next. You can also vary transitions from scene to scene. IMPORTANT: Some Fade/Wipe Effects cannot be used with certain modes of Programme AE with special effects ( 墌 pg. 26). If an unusable Fade/Wipe Effect is selected, its indicator blinks or goes out.
EN 25 Fader And Wipe Menu Menu FADER — WHITE FADER — BLACK FADER — MOSAIC Effect Fade in or out with a white screen. Fade in or out with a black screen. Fade in or out with a full-screen mosaic effect. FADER — B.W Fade in to a colour screen from a black and white screen, or fade out from colour to black and white. WIPE — CORNER Wipe in on a black screen from the upper right to the lower left corner, or wipe out from lower left to upper right, leaving a black screen.
RECORDING Advanced Features (cont.) EN IMPORTANT: Some modes of Programme AE with special effects cannot be used with certain Fade/Wipe Effects ( 墌 pg. 25). If an unusable mode is selected, its indicator blinks or goes out. MENU/ BRIGHT Wheel Power Switch Display P. A E / E F F E C T Menu Screen S L OW 4 x S L OW 1 0 x V I D EO E CHO 4 OF F 1/50 S HU T T E R 1/50 1/100 S HU T T E R 1/100 1/250 S HU T T E R 1/250 TWILIGHT Makes evening scenes look more natural. White Balance (墌 pg.
EN 27 Exposure Control Iris Lock Manual exposure adjustment is recommended in the following situations: • When shooting using reverse lighting or when the background is too bright. • When shooting on a reflective natural background such as at the beach or when skiing. • When the background is overly dark or the subject light. Use this function in the following situations: • When shooting a moving subject.
EN RECORDING Advanced Features (cont.) White Balance Adjustment Manual White Balance Operation A term that refers to the correctness of colour reproduction under various lighting. If the white balance is correct, all other colours will be accurately reproduced. The white balance is usually adjusted automatically. However, more advanced camcorder operators control this function manually to achieve a more professional colour/tint reproduction.
PLAYBACK Basic Playback Play/Pause Button (4/6) Rewind Button (2) Fast-Forward Button (3) Stop Button (5) Power Zoom Lever (VOL.) EN 1 2 29 Load a tape ( pg. 10). Set the Power Switch to “ ” while pressing down the Lock Button located on the switch. To start playback, press 4/6. •To stop playback, press 5. •Press 2 to rewind, or 3 to fast-forward the tape during Stop mode. To Control The Speaker Volume . . . .... slide the Power Zoom Lever (VOL.
PLAYBACK Advanced Features EN PL Power Switch OFF AY Lock Button MENU/BRIGHT Wheel Using Menus For Detailed Adjustment The following procedure applies to all except Synchro Comp ( pg. 47, 48). 1 2 3 4 5 6 Recording Start/Stop Button Set the Power Switch to “ ” while pressing down the Lock Button located on the switch. Press MENU/BRIGHT. The Menu Screen appears. Rotate MENU/BRIGHT to select the desired function icon, and press it. The selected function menu appears.
EN 31 Playback Sound During playback, the camcorder detects the sound mode in which the recording was made, and plays the sound back. Select the type of sound to accompany your playback picture. According to the menu access explanation on pg. 30, select “SOUND MODE” or “12BIT MODE” from the Menu Screen and set it to the desired parameter. SOUND MODE 12BIT MODE STEREO Sound is output on both “L” and “R” channels in stereo. SOUND L Sound from the “L” channel is output in stereo.
PLAYBACK Basic Connections EN These are some basic types of connections. When making the connections, refer also to your VCR and TV instruction manuals. A.
EN 1 2 Make sure all units are turned off. 3 4 5 Connect the VCR output to the TV input, referring to your VCR’s instruction manual. Connect the camcorder to a TV or VCR as shown in the illustration ( pg. 32). If using a VCR . . . go to step 3. If not . . . go to step 4. Turn on the camcorder, the VCR and the TV. Set the VCR to its AUX input mode, and set the TV to its VIDEO mode. To choose whether or not the following displays appear on the connected TV . . . •Date/Time ....
PLAYBACK Advanced Connections EN Connection To A Personal Computer This camcorder can transfer still images to a PC by using the image transfer software (optional software such as the HS-V14KIT) when connected as shown in the illustration. It is also possible to transfer still images to a PC with a DV connector-equipped capture board installed.
EN 35 Connection To A Video Unit Equipped With A DV Connector Power Switch Connector cover* To DV IN/OUT Core filter DV cable (optional) To DV IN connector To DV connector Video unit equipped with a DV input connector To PC connector Core filter Digital Printer PC connection cable (optional) To RS-232C PC * When connecting the cable, open this cover. Connection to the GV-DT3 Digital Printer (optional) allows you to print out images or transfer them to a PC.
DUBBING EN Dubbing To A VCR 1 2 Following the illustration, connect the camcorder and the VCR. Also refer to pg. 32 and 33. 3 4 Engage the VCR’s AUX and Record-Pause modes. 5 6 7 Press 4/6 on the camcorder and engage the VCR’s Record mode.
EN 37 Dubbing To A Video Unit Equipped With A DV Connector (Digital Dubbing) It is also possible to copy recorded scenes from the camcorder onto another video unit equipped with a DV connector. Since a digital signal is sent, there is little if any image or sound deterioration. [To use this camcorder as a player] Power Switch Connector cover* 1 Make sure all units are turned off. Connect the camcorder to a video unit equipped with a DV input connector using a DV cable as shown in the illustration.
DUBBING (cont.) EN Dubbing From A Video Unit Equipped With A DV Connector (Digital Dubbing) [To use this camcorder as a recorder] 1 Make sure all units are turned off. Connect the camcorder to a video unit equipped with a DV output connector using a DV cable as shown in the illustration. 2 3 Set “REC MODE” to “SP” or “LP” in the Menu Screen depending on your preference ( pg. 11 or 30). 4 Press the Recording Start/Stop Button on the camcorder to engage the Record-Pause mode. “DV.
USING THE REMOTE CONTROL UNIT 1 EN 39 The Full-Function Remote Control Unit can operate this camcorder from a distance as well as the basic operations (Playback, Stop, Pause, Fast-Forward and Rewind) of your VCR. It also makes additional playback functions possible. 3 Tab Installing The Batteries The remote control uses two “AAA (R03)” size batteries. See “General Battery Precautions” ( pg. 63). 2 1 2 3 + – + Remove the battery compartment cover while pushing up the tab as illustrated.
USING THE REMOTE CONTROL UNIT (cont.) EN 1 0 2 4 6 8 ! 3 5 @ $ ^ * 7 9 # % & ( ) Functions Buttons With the camcorder’s Power Switch set to the camera position (“ ” or “ ”). 1 Infrared beam transmitting window Transmits the beam signal. 2 Zoom (T/W) Buttons Zoom in/out ( pg. 16) 3 DISPLAY Button — 4 SHIFT Button — 5 SLOW Rewind/Forward Buttons — — Left/Right Buttons With the camcorder’s Power Switch ”. set to “ Zoom in/out ( pg. 41) pg. 33, 36, 44 pg. 41, 43 pg. 41 pg.
EN Remote sensor 41 FEATURE: Slow-Motion Playback PURPOSE: To allow slow-speed search in either direction during playback. OPERATION: Zoom Buttons Up Button Down Button SHIFT Left or SLOW Rewind Button PLAY PAUSE STOP Right or SLOW Forward Button Normal playback Press T 1) To change from normal to Slow-Motion Playback, press PAUSE (6) to engage Still Playback then press SLOW (9 or 0) more than approx. 2 seconds. After approx. 1 minute in Slow Rewind or approx.
USING THE REMOTE CONTROL UNIT (cont.) EN PLAYBACK EFFECT Select Menu P L A Y BACK E F F E C T 4O F F 1 2 3 4 5 C L A S S I C F I LM MONO T ON E SEP I A S T ROB E V I D EO E CHO Remote sensor PLAY EFFECT EFFECT ON/OFF FEATURE: Playback Special Effects PURPOSE: To allow you to add creative effects to the playback image. OPERATION: 1) To start playback, press PLAY (4). 2) Point the remote control at the camcorder's remote sensor and press EFFECT. The PLAYBACK EFFECT Select Menu appears.
EN 43 Random Assemble Editing [R.A.Edit] Create edited videos easily using your camcorder as the source player. You can select up to 8 “cuts” for automatic editing, in any order you like. R.A.Edit is more easily performed when the MBR (Multi-Brand Remote) is set to operate with your brand of VCR (see VCR CODE LIST), but can also be performed by operating the VCR manually. Before operation, make sure the batteries are installed in the remote control ( pg. 39).
USING THE REMOTE CONTROL UNIT (cont.) EN MAKE CONNECTIONS Also refer to pg. 32 and 33. 1 To AV Connector cover** Core filter S-Video cable (optional) A VCR other than above . . . Core filter To AUDIO, VIDEO* and S-VIDEO IN connectors VCR ... connect the editing cable to the R.A.EDIT connector. ... connect the editing cable to the remote control’s PAUSE IN connector. To S Editing cable (provided) To Remote PAUSE or R.A.
EN SELECT SCENES Programme 1–– 2 3 4 5 6 7 8 45 IN OU T –– : ––~ ~ ~ ~ ~ ~ ~ ~ MODE Random Assemble Editing Menu T I ME COD E – – : – – TOT A L 00 : 00 Remote sensor PLAY FADE/WIPE EFFECT EDIT IN/OUT R.A.EDIT ON/OFF CANCEL 4 Point the remote control at the camcorder’s remote sensor. Press PLAY (4) and then press R.A.EDIT ON/ OFF on the remote control. The Random Assemble Editing Menu appears. 5 If using a Fade/Wipe at the beginning of the scene, press FADE/WIPE on the remote control.
USING THE REMOTE CONTROL UNIT (cont.) EN AUTOMATIC EDITING TO VCR Recording Start/Stop Button 1 2 3–– 4 5 6–– 7 8 IN 00 : 25~ 07 : 18~ 03 : 33~ 09 : 30~ 15 : 55~ –– : ––~ ~ ~ OU T MODE 02 : 05 –– 08 : 31–– –– 05 : 53 13 : 15 16 : 20–– –– 11 12 Rewind the tape in the camcorder to the beginning of the scene you want to edit and press PAUSE (6). 13 Press the Recording Start/Stop Button on the camcorder. Editing proceeds as programmed, right through to the end of the last registered scene.
EN For More Accurate Editing Programme 1 1–– 2 3 4 5 6 7 8 IN OU T –– : ––~ ~ ~ ~ ~ ~ ~ ~ 47 MODE Random Assemble Editing Menu T I ME COD E – – : – – TOT A L 00 : 00 VCR (Recording deck) Some VCRs make the transition from Record-Pause to Record mode faster than others. Even if you begin editing for the camcorder and the VCR at exactly the same time, you may lose scenes you wanted, or find that you have recorded scenes you did not want.
USING THE REMOTE CONTROL UNIT (cont.) EN ADJUSTMENT OF VCR/CAMCORDER TIMING MENU/BRIGHT Wheel Display V I D EO MENU 4 Point the remote control at the camcorder’s remote sensor and press R.A.EDIT ON/OFF to make the Random Assemble Editing menu disappear, then press MENU/BRIGHT. The Menu Screen appears. 5 Rotate MENU/BRIGHT to select “ ” and press it. “VIDEO MENU” appears. Then, rotate it to “SYNCHRO” and press it. The value for “SYNCHRO” is highlighted.
EN 49 Audio Dubbing Display 6e Audio Dub Standby mode The audio track can be customized only when recorded in the 12-bit mode ( pg. 21). NOTES: ● Audio Dubbing is not possible on a tape recorded in 16-bit audio, on a tape recorded in the LP mode or on a blank portion of a tape. ● To perform Audio Dubbing while watching on the television, make connections ( pg. 32). Speaker 1 2 3 Play back the tape to locate the point where editing will start, then press PAUSE (6).
TROUBLESHOOTING EN If, after following the steps in the chart below, the problem still exists, please consult your nearest JVC dealer. The camcorder is a microcomputer-controlled device. External noise and interference (from a TV, a radio, etc.) might prevent it from functioning properly. In such cases, first disconnect its power supply unit (battery pack, AC Power Adapter/Battery Charger, etc.) and wait a few minutes; and then re-connect it and proceed as usual from the beginning.
EN SYMPTOM 51 POSSIBLE CAUSES CORRECTIVE ACTION 8. Snapshot mode cannot be used. 8. •The Squeeze mode is selected. 8. •Disengage the Squeeze mode (墌 pg. 22). 9. The colour of Snapshot looks strange. 9. •The light source or the subject does not include white. Or there are various different light sources behind the subject. •The Sepia or Monotone mode is activated. 9. •Find a white subject and compose your shot so that it also appears in the frame (墌 pg. 14). •Turn off Sepia and Monotone (墌 pg. 26).
EN TROUBLESHOOTING (cont.) SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION 15. The Picture Wipe and Dissolve functions do not work. 15. •The last selected editing scene is ending. •At the end of the last selected scene for editing, the Power Switch was set to “OFF”. •The power is off. 15. •Select Picture Wipe or Dissolve before beginning recording. The effects are then automatically activated (墌 pg. 24).
EN 53 SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION 19. Even when Slow Shutter is not selected, the image looks like it is activated. 19 •When shooting in the dark, the unit becomes highly sensitive to light and the image takes on an effect similar to Slow Shutter. 19. •If you want the lighting to look more natural, set GAIN UP to “AGC” or “OFF” in the Menu Screen (墌 pg. 21). 20. There is no strobe when the Classic Film or Strobe mode is activated. 20. •The Picture Wipe or Dissolve function is in use.
EN SYMPTOM TROUBLESHOOTING (cont.) POSSIBLE CAUSES CORRECTIVE ACTION 26. Images on the LCD monitor appear dark or whitish. 26. •In places subject to low temperature, images become dark due to the characteristics of the LCD monitor. When this happens, the displayed colours differ from those that are actually recorded. This is not a defect of the camcorder. •When the LCD monitor’s fluorescent light reaches the end of its service life, images on the LCD monitor become dark.
EN SYMPTOM POSSIBLE CAUSES 55 CORRECTIVE ACTION 31. During recording, sound cannot be heard. 31. •This is normal. 31. 32. Play, Rewind and FastForward functions do not work. 32. •The Power Switch is not set to “ ”. 32. •Set the Power Switch to “ ” (墌 pg. 29). 33. The tape is moving, but there is no picture. 33. •Your TV has AV input terminals, but is not set to its VIDEO mode. •The cassette holder cover is open. 33. •Set the TV to the mode or channel appropriate for video playback (墌 pg.
EN SYMPTOM TROUBLESHOOTING (cont.) POSSIBLE CAUSES CORRECTIVE ACTION 39. An error indication (E01 — E06) appears. 39. •A malfunction of some kind has occurred. In this case the camcorder’s functions become unusable. 39. •Remove the power supply (battery pack, etc.) and wait a few minutes for the indication to clear. When it does, you can resume using the camcorder. If the indication remains even though you repeat the above two or three times, please consult your nearest JVC dealer. 40.
INDEX Indications EN 57 LCD Monitor/Viewfinder Indications During Recording 3* 4* 1 2 q* ( & % ) SP 3 5 F . AU T O 4 0 xW T REC * 444 6w P HO T O 6* 2 ^ 5 7 8 9 $ BR I GHT – # TC 2 3 : 2 5 @ 1 Displays the selected Fade/Wipe effect. + 1. !* (墌 pg. 24, 25) 2 Appears when in the Squeeze or Cinema mode. (墌 pg. 22) 3* Displays the recording mode (SP or LP). (墌 pg. 11) 4* Displays the tape remaining time. (墌 pg. 12) 5 Appears during zooming. Zoom level indicator (墌 pg.
INDEX Indications (cont.) EN LCD Monitor/Viewfinder Indications During Playback 1 1 2 B I T / SOUND 1 L 2 3 LP 4 VO L UME TC 1 0 : 0 6 : 2 0 6 5 1. 1. 00 12 : 00 4 1 Displays the sound mode. 2 Displays the tape speed. 3 Appears while a tape is running. (墌 pg. 30, 31) (墌 pg. 11) 4 : Playback 3 : Fast-Forward/Shuttle search 2 : Rewind/Shuttle search 6 : Pause 64 : Forward slow-motion 16 : Reverse slow-motion e : Audio Dubbing 6e : Audio Dubbing Pause 4 Displays the date/time. (墌 pg.
EN Indications 59 Function Appears if condensation occurs. When this indication is displayed, wait more than 1 hour until condensation disappears. CONDENSATION, OPERATION PAUSED PLEASE WAIT TAPE! TAPE END DIFFERENT FORMATTED TAPE Appears if a tape is not loaded when the Recording Start/Stop Button or SNAPSHOT Button is pressed while the Power Switch is set to “ ” or “ ”. Appears when the tape ends during recording or playback. (墌 pg. 13) Appears if a tape in another format is loaded.
INDEX Controls, Connectors And Indicators EN t y ) q w 1 e i u 2 345 6 78 r PLAY O 60 FF #$ % p o 90!@ R T W E Q ^ &* (
EN 61 Controls Connectors 1 Monitor Open Button [PUSH OPEN] ... 墌 pg. 12 2 Dioptre Adjustment Control ................... 墌 pg. 8 3 Battery Release Button To connect cables to the following connectors & and *, open the LCD monitor. 4 5 6 7 8 9 0 ! @ # $ % ^ [BATTERY RELEASE] .............................. 墌 pg. 7 •MENU Wheel [+, –, PUSH] ............... 墌 pg. 20 •LCD Monitor BRIGHT (Brightness) Control [+, –] .................. 墌 pg. 12 Snapshot Button [SNAPSHOT] ....... 墌 pg.
USER MAINTENANCE EN After Use Cleaning The Camcorder 1 2 1 To clean the exterior, wipe gently with a soft cloth. Put the cloth in diluted mild soap and wring it well to wipe off heavy dirt. Then wipe again with a dry cloth. 2 Press PUSH OPEN and open the LCD monitor. Wipe gently with a soft cloth. Be careful not to damage the monitor. Close the LCD monitor. 3 4 To clean the lens, blow it with a blower brush, then wipe gently with lens cleaning paper.
CAUTIONS EN 63 Video Light Battery Packs DANGER The supplied battery pack is a lithium-ion battery. Before using the supplied battery pack or an optional battery pack, be sure to read the following cautions: Terminals 1. To avoid hazards . . . .... do not burn. .... do not short-circuit the terminals. When transporting, make sure the provided battery cap is attached to the battery. If the battery cap is misplaced, carry the battery in a plastic bag. .... do not modify or disassemble. ....
EN Cassettes To properly use and store your cassettes, be sure to read the following cautions: 1. During use . . . .... make sure the cassette bears the Mini DV mark. .... be aware that recording onto prerecorded tapes automatically erases the previously recorded video and audio signals. .... make sure the cassette is positioned properly when inserting. .... do not load and unload the cassette repeatedly without allowing the tape to run at all. This slackens the tape and can result in damage. ....
EN How To Handle A CD-ROM •Take care not to soil or scratch the mirror surface (opposite to the printed surface). Do not write anything or put a sticker on either the front or back surface. If the CD-ROM gets dirty, gently wipe it with a soft cloth outward from the centre hole using a circular motion. •Do not use conventional disc cleaners or cleaning spray. •Do not bend the CD-ROM or touch its mirror surface. •Do not store your CD-ROM in a dusty, hot or humid environment.
TERMS EN A F AC Power Adapter/Charger ..................... 墌 pg. 6, 7 Audio Dubbing ........................................ 墌 pg. 49 Auto Focus ............................................... 墌 pg. 19 Auto Shut off ...................................... 墌 pg. 13, 29 Fade-In/Out ........................................ 墌 pg. 24, 25 Fast-Forward The Tape .............................. 墌 pg. 29 Frame-By-Frame Playback .................. 墌 pg. 29, 41 B Gain Up ......................................
EN 67 P T Picture Wipe/Dissolve ......................... 墌 pg. 24, 25 Playback Special Effects ............................ 墌 pg. 42 Playback Zoom ........................................ 墌 pg. 41 Power Switch Position .............................. 墌 pg. 13 Printer ...................................................... 墌 pg. 35 Programme AE With Special Effects ........... 墌 pg. 26 Provided Accessories .................................. 墌 pg. 4 Tally ..................................................
SPECIFICATIONS EN Camcorder For General Power supply : DC 6.3 V DC 7.2 V Power consumption LCD monitor off, viewfinder on LCD monitor on, viewfinder off Video light Dimensions (W x H x D) : : : : Weight Operating temperature Operating humidity Storage temperature Pickup Lens Filter diameter LCD monitor Viewfinder Speaker : : : : : : : : : : (Using AC Power Adapter/Charger) (Using battery pack) Approx. 4.3 W Approx. 5.3 W Approx. 3.
EN 69 For Connectors S AV Video output Audio output DV Input/output PC (DIGITAL PHOTO) Digital still output JLIP/EDIT : Y : 1 V (p-p), 75 Ω, analogue output C : 0.29 V (p-p), 75 Ω, analogue output : 1 V (p-p), 75 Ω, analogue : 300 mV (rms), 1 kΩ, analogue, stereo : 4-pin, IEEE 1394 compliant : ø2.5 mm, 3-pole : ø3.5 mm, 4-pole AC Power Adapter/Charger AA-V40A/AS Power requirement Power consumption Output Charge VTR Dimensions (W x H x D) Weight : AC 110 V to 240 V`, 50 Hz/60 Hz : 23 W : : : : DC 7.
EN MEMO
MEMO EN 71
EN GR-DVL105 VICTOR COMPANY OF JAPAN, LIMITED ®Registered Trademark owned by VICTOR COMPANY OF JAPAN, LTD. COPYRIGHT© 2000 VICTOR COMPANY OF JAPAN, LTD.