TM-H1700G OPERATING INSTRUCTIONS [ TM-H1700G/E / TM-H1700G/U ] COLOR VIDEO MONITOR INSTRUCTIONS FRANÇAIS TM-H1700G DEUTSCH ENGLISH BEDIENUNGSANLEITUNG : FARB-VIDEO-MONITOR MANUEL D’INSTRUCTIONS : MONITEUR VIDEO COULEUR MANUALE DI ISTRUZIONI : MONITOR VIDEO A COLORI INSTRUCCIONES : MONITOR DE VIDEO A COLOR !"#$%&'(&) ITALIANO For Customer Use: Enter below the Serial No. which is located on the rear of the cabinet. Retain this information for future reference.
WARNINGS To prevent fire or shock hazard, do not expose this monitor to rain or moisture. Dangerous high voltages are present inside the unit. Do not remove the back cover of the cabinet. When servicing the monitor, consult qualified service personnel. Never try to service it yourself. WARNING : THIS APPARATUS MUST BE EARTHED. Machine Noise Information Ordinance 3. GSGV, January 18, 1991: The sound pressure level at the operator position is equal or less than 70 dB(A) according to ISO 7779.
CONTROLS AND FEATURES FRONT VIEW REAR VIEW VIDEO A 12 REMOTE 10 0C CHROMA CONTRAST VOLUME/SELECT MENU UNDER SCAN A IN POWER B OUT VIDEO B PHASE BRIGHT INPUT SELECT 11 13 IN OUT VIDEO A IN OUT VIDEO B CHROMA CONTRAST TM-H1700G PHASE BRIGHT VOLUME/SELECT MENU UNDER SCAN A B POWER INPUT SELECT 1 2 3 4 6 5 7 8 IN 9 IN 14 IN Y/C OUT Y/C OUT AUDIO A IN OUT AUDIO B IN Press this button to activate the picture color density adjustmen
(cont’d) REAR VIEW HOW TO HANDLE BASIC OPERATIONS BASIC OPERATION 19 1. Press the MAIN POWER switch to turn on the power. 2. Press the POWER switch to turn on the power. REMOTE For U.S.A. and Canada POWER VIDEO A To AC outlet (230 V AC, 50 Hz/60 Hz) IN OUT VIDEO B IN 19 IN OUT Y/C About the STATUS indication OUT IN 3. Press the INPUT SELECT buttons to choose input. OUT AUDIO B IN OUT Select video/audio signals input to terminals on the rear panel.
HOW TO HANDLE BASIC OPERATIONS (cont’d) VIDEO SIGNAL CONTROLS HOW TO USE THE MENU FUNCTIONS DISPLAY AND SELECTION IN THE
TM-H1700G 1-6 HOW TO USE THE MENU FUNCTIONS (cont’d) • WHITE BALANCE • CONTROL LOCK • STATUS DISPLAY • REMOTE SYSTEM • INPUT REMOTE 1 Notes: ● Parameters for H. POSITION and V. POSITION can be set separately depending on the signal (Input A (VIDEO), Input B (VIDEO) or Input B (Y/C)) selected with the input 2 select buttons on the front panel. Select the required video input with the input select buttons on the front panel in advance.
BASIC CONNECTION EXAMPLE HOW TO INITIALIZE THE SETTING Notes: SCREEN DISPLAY AND SELECTIONS IN THE RESET MODE • Before connecting your system, make sure that all units are turned off. • The illustration below shows some examples of different connections. Terminal connections may differ depending on the component connected. Be sure to refer to the instructions provided with the unit(s) you are connecting. • Each pair of input (IN) and output (OUT) terminals are bridge-connected.
TM-H1700G 1-8 HOW TO USE EXTERNAL CONTROL BASIC CONNECTION EXAMPLE (cont’d) ABOUT EXTERNAL CONTROL VIDEO B (Y/C) Connection Example (Select Input B (Y/C)) This monitor is provided with an external control terminal. MAKE (make contact) or TRIG. (trigger) system can be selected. (MAKE (make contact system): The function is controlled with H and L (short-circuit/open with the 15th pin GND). (TRIG.
TROUBLESHOOTING Solutions to common problems related to your monitor are described here. If none of the solutions presented here solves the problem, unplug the monitor and consult a JVC-authorized dealer or service center for assistance. Problems No power supply. Points to be checked Measures (Remedy) Is the power plug loosened or disconnected? Firmly insert the power plug. Is the main power turned OFF? Turn the main power ON. (See page 6.
TM-H1700G SPECIFICATIONS Effective screen size Scanning frequency Horizontal resolution Input terminals VIDEO A VIDEO B AUDIO A AUDIO B REMOTE : Color video monitor : PAL, NTSC (3.58) : 16-3/16" (41 cm) measured diagonally, 90° deflection, in-line gun, trio-dot type (phosphor dot-trio pitch 0.27 mm) : Width 12-7/8" (327.5 mm) Height 9-5/8" (246.2 mm) Diagonal 16-1/32" (407.1 mm) : (H) 15.734 kHz (NTSC) 15.625 kHz (PAL) (V) 59.
TM-H1700G Dimensions Unit : inch (mm) < Side View > < Front View > 16-1/2 (418) 16-1/8 (407) 15-5/8 (395) 1/16 (1.5) VOLUME/SELECT MENU UNDER SCAN A BRIGHT B POWER INPUT SELECT 11-3/8 (288) 2-3/4 (68) 11-3/8 (286) 1/8 (3) PHASE 1/8 (3) CHROMA CONTRAST TM-H1700G 7 (175) 9-5/8 (246.2)* 13-1/4 (334) 12-7/8 (327.5)* ø7/8 (20) * Asterisks (*) are used to indicate front panel dimensions. Y/C (Mini DIN 4 pin) terminal specification 2 4 Pin No.
TM-H1700G TM-H1700G COLOR VIDEO MONITOR VICTOR COMPANY OF JAPAN, LIMITED Printed in Thailand LCT1092-001A-H 1101-Y-U-JMT © 2001 VICTOR COMPANY OF JAPAN, LIMITED 1-12 No.