MANUEL D’INSTRUCTIONS : PRESENTOIR NUMERIQUE BEDIENUNGSANLEITUNG : DIGITALEN VORFÜHRERS MANUALE DI ISTRUZIONI : DIGITAL PRESENTER DISPOSITIVO PER PRESENTAZIONI ITALIANO AV-P950E INSTRUCTIONS FRANCAIS DIGITAL PRESENTER DEUTSCH AV-P950E DIGITAL PRESENTER ENGLISH R R VICTOR COMPANY OF JAPAN, LIMITED R R is a registered Trademark owned by VICTOR COMPANY OF JAPAN, LTD. is a registered Trademark in Japan, the U.S.A., the U.K. and many other countries.
SAFETY PRECAUTIONS Due to design modifications, data given in this instruction book are subject to possible change without prior notice. WARNING TO PREVENT FIRE OR HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. • Use only with the rated power supply. To ensure safe operation, the three-pin plug supplied must be inserted only into a standard three-pin power point which is effectively grounded through the normal household wiring. • Do not modify the unit or operate it with the cover removed.
Thank you for purchasing the JVC AV-P950 Digital Presenter. To make the most of this unit’s many features, please read this booklet carefully. After reading, keep it handy for future reference. CONTENTS Safety precautions .............................................................................................................................................................................. 2 Features .......................................................................................................
BEFORE USE Part names Remote control light reception section Camera head Slide film holder Camera arm Close-up lens Side illumination Side illumination Lock release button (UNLOCK) Rear panel POWER switch Stage Back illumination Control panel Setup 1. While pressing the UNLOCK button 1, raise the camera arm so that it stands in the direction shown 2. 2 1 2. When the camera arm is raised all the way, release the UNLOCK button. 3.
6. Perform the following connections to the input connector of a projector or display. • To protect this unit and the connected equipment, be sure to turn the POWER switch to OFF before connecting cables. ● Connection with the equipment with the D-sub 15-pin input connector (for main picture presented using a projector, etc.
OPERATION Control panel LIGHTS NEGA/POSI BW/COLOR TEXT MODE Use to turn on either the side illuminations or the back illumination. With factory setting, when the power is switched on, the side illuminations will come on. Every time the button is pressed, the lighting of the unit changes as follows: Side illuminations ON back illumination ON all lighting OFF side illuminations ON again, and so on. LIGHTS CAMERA NEGA/POSI: Reverse the colors and brightness of a picture.
BRIGHTNESS AUTO WHITE SET ZOOM PRESET Use to adjust the brightness of a camera picture. AUTO: Press this button to automatically adjust the brightness. The indicator blinks. When brightness adjustment is complete, this indicator goes out. DARKER: Press to make the picture darker. BRIGHTER: Press to make the picture brighter. Use to adjust the white balance of a camera picture automatically. Shoot a white paper in full screen, adjust the brightness and then press the button.
Rear panel MODE A B C D E F 1 • All switches are factory-set to “1”. Mode setting for the RGB output picture A XGA (1024 X 768) ........ 1 SVGA (800 X 600) ........ 0 VGA (640 X 480) ........ 0 Use to set the RGB output picture mode or sync signal mode. Set it according to the specifications of the connected projector or display. 0 B 1 1 0 • When using either SVGA or VGA mode, the picture quality will be slightly inferior to that of XGA mode. Preview mode setting (see page 14) 1 .... OFF 0 ....
DC OUTPUT CAUTION Connect TA-AV-Z7U only. Connecting other apparatus may cause malfunctioning. Use to transfer pictures to a personal computer. Also, use to control this unit from a personal computer. * For instructions on installation of picture-transfer software in your personal computer and data transfer procedures, refer to the separate "Application software instructions". ENGLISH Supplies the power exclusively for the optional LCD monitor (TA-AV-Z7U).
Menu adjustment 䡵 Operation 2 3 4 5 1 The adjustment and setting of this unit can be performed with the on-screen menu displayed by the projector or monitor. NEGA BW ON LIGHTS NEGA/ POSI BW/ COLOR TEXT MODE CAMERA EXT IN Press the MENU/ENTER button 1 to display the menu. Select the adjustment item with the 䊲 button 2 and the 䊱 button 3. MENU/ ENTER Set the data with the 䊴 button 4 and the 䊳 button 5 . When the setting is complete, press the MENU/ENTER button to exit the menu display.
Remote control unit To use the remote control unit, point it toward the remote control light receptor (at the top of the camera head). 5 FREEZE ON OFF EXT IN 4 2 1 ENGLISH The effective operating distance is up to 5 meters from the receptor (with new batteries). The remote control unit requires two standard AA batteries. Open the cover of the battery case on the rear of the remote control unit and set the batteries in the correct direction, according to the + and - marks.
PRESENTATION (BASIC) Printed material and 3-dimensional objects 1. Adjust the position 1 and direction 2 of the side illumination lamps so that the stage receives uniform lighting. 2. Place an object on the white back illumination area of the stage. 3. Adjust the picture size with the ZOOM buttons 3 while checking the screen. 4. When the picture size is determined, adjust the focus with 1 2 the FOCUS buttons 1. • It is recommended to turn on the side illumination lamps.
Transparent material such as OHP sheets tion. 7 2. Put the transparent material on the stage. 3. Adjust the screen brightness with the BRIGHTNESS buttons 5. 4. Adjust the picture size with the ZOOM buttons 3. 5. When the picture size is determined, adjust the focus with the FOCUS buttons 4. NEGA BW ON LIGHTS NEGA/ POSI BW/ COLOR TEXT MODE CAMERA EXT IN ENGLISH 1.
PRESENTATION (APPLICATION) Preview mode By using the preview mode, you can adjust zoom and focus on the preview monitor before outputting the picture to the main presentation screen. This makes it possible for you to make a smooth, professional presentation because material changes and screen adjustments are not shown. The following example describes how to transfer an image to the main projector. 䡵 Connection and setting 1.
Picture memory Up to three of the most frequently used images can be stored in memory for later recall. During a presentation, you can switch between camera pictures and memory pictures as required. The stored memory pictures are useful for comparing various materials. 1. Shoot the object whose image you want to save. 2. Adjust the picture using the ZOOM buttons 1 and the FOCUS buttons 2. 3.
EXTERNAL CONTROL 1. When using the provided control software Control panel and menu display/setting functions can be controlled from an external device such as a personal computer. For connections, software installation and operation, refer to the separate "Application software instruction manual". 2. When using customized control software The functions of this unit can be remote-controlled with an external device via the remote control input connector (RS-232C).
TROUBLESHOOTING When you have a problem, check the following points first to see if a solution can be found. If the problem persists, stop using the unit and consult your JVC dealer. No picture appears. Focusing is not possible.
SPECIFICATIONS GENERAL Power requirements Power consumption Dimensions (WHD) Mass OPTICAL Lens Shooting area : AC 220 V - 240 V `, 50 Hz/60 Hz : 0.36 A : 775 mm x 700 mm x 670 mm (open) (30-9/16" x 27-9/16" x 26-7/16") (Width: when the lights are moved to the outside maximum) 450 mm x 230 mm x 765 mm (closed) (17-3/4" x 9-1/16" x 30-1/8") : 9 k˝ ( 19.8 lbs.) : : : Focal distance adjustable range : Zoom Focus Brightness LIGHTING Side illumination Back illumination F2.9 to F3.1, f = 6.
MANUEL D’INSTRUCTIONS : PRESENTOIR NUMERIQUE BEDIENUNGSANLEITUNG : DIGITALEN VORFÜHRERS MANUALE DI ISTRUZIONI : DIGITAL PRESENTER DISPOSITIVO PER PRESENTAZIONI ITALIANO AV-P950E INSTRUCTIONS FRANCAIS DIGITAL PRESENTER DEUTSCH AV-P950E DIGITAL PRESENTER ENGLISH R R VICTOR COMPANY OF JAPAN, LIMITED R R is a registered Trademark owned by VICTOR COMPANY OF JAPAN, LTD. is a registered Trademark in Japan, the U.S.A., the U.K. and many other countries.