ENGLISH FRANÇAIS VISUAL PRESENTER MANUEL D’INSTRUCTIONS : PRÉSENTOIR DE VISUALISATION AV-P720U INSTRUCTIONS Before beginning to operate this unit, please read the INSTRUCTIONS MANUAL carefully in order to make sure that the best possible performance is obtained. For Customer Use: Enter below the Serial No. which are located on the fram. Retain this information for future reference. Model No. AV-P720U Serial No.
The instructions are given in two languages : CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN English from page 2 to 14 and French from page 15 to 26 Les instructions sont donnés en deux langues : En anglais de la page 2 à 14 et en français de la page 15 à 26. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Thank you for purchasing the JVC AV-P720 Visual Presenter. To make the most of this unit’s many features, please read this booklet carefully. After reading, keep it handy for future reference. SAFETY PRECAUTIONS ............................................................................................................................................................................................ 2 CONTENTS ...................................................................................................
PARTS NAMES Main Unit Camera Head Camera Arm Close-up Lens Slide Film Holder (P. 8) Lighting Rear Panel UNLOCK Button Rear Control Panel POWER Switch Stage Front Control Panel Front Operation Panel FOCUS INPUT SELECT ZOOM FAR NEAR VISUAL PRESENTER AV-P720 CAMERA VIDEO 1 1 2 3 4 4 INPUT SELECT button MANUAL AUTO 2 3 WIDE TELE 4 : changes the input system to the camera or video terminals. (P9) MANUAL FOCUS button : manually adjusts the camera focus.
Rear Operation Panel IRIS AUTO WHITE SET 1 1 2 3 4 MENU/ENTER 2 ENGLISH ON-SCREEN ADJUSTMENT LIGHTING 3 4 AUTO WHITE SET button : selects the AUTO WHITE BALANCE ADJUSTMENT mode. (P10) IRIS button : adjusts brightness of the material presented on the monitor screen. (P10) ON SCREEN ADJUSTMENT button : operates the ON SCREEN ADJUSTMENT function. (P11) LIGHTING button : turns LIGHTING on/off.
BEFORE STARTING 1. Pull up the camera arm slightly towards the direction of 2 1 2 while pressing the camera arm lock release button 1. Release the lock release button; then pull up the camera arm until the locking system engages completely. Note: • Do not let go of the camera arm while the lock release button is depressed. The camera arm section will drop down of its own weight and this could result in breakdown and/or injury.
STORING THE EQUIPMENT 1. Turn the power switch OFF, and then remove the power cord and the video cable from the terminals. Note: 4 1 ENGLISH • Hold the plug sections of the power cord and the video cable when unplugging them from the terminals. 2 2. Rotate the camera head towards the direction of 1 until you hear a click. 3 3. Press the lock release button 3 while moving the camera arm to the direction of 2. Then push down the camera arm towards the direction of 4.
PRESENTATION 1. Presentation of Printed and ThreeDimensional Materials • Place a subject on the stage, and adjust the subject size using the ZOOM button 1 by looking at the monitor screen. (Focusing will be adjusted automatically.) * When using the equipment indoors, we recommend the use of lighting (see page 10 for lighting) FOCUS INPUT SELECT NEAR CAMERA MANUAL VIDEO ZOOM FAR AUTO WIDE TELE Front Control Panel 1 Note: • The LIGHTING section will be hot while in use or immediately afterwards.
OPERATION Zoom • Every time the ZOOM button is pressed, focusing will be automatically re-adjusted. • When the ZOOM button is continually pressed, the zoom speed will increase after a while. FOCUS INPUT SELECT CAMERA MANUAL VIDEO ZOOM FAR NEAR AUTO WIDE TELE ENGLISH • When the ZOOM button “TEL” is pressed, the image on the monitor screen will become gradually bigger; when the ZOOM button “WIDE” is pressed the image will become gradually smaller.
Lighting • This button turns lighting ON/OFF. • If you press this button while lighting is turned OFF, light will come on; if you push this button while lighting is turned ON, light will go out. ON-SCREEN ADJUSTMENT AUTO WHITE SET Note: • Because a fluorescent lamp is used for lighting, it will take a few seconds to come on. IRIS MENU/ENTER LIGHTING MENU/ENTER LIGHTING Rear Control Panel Brightness • This function is used to adjust brightness of the material shown on the monitor screen.
On-Screen Adjustments This function will enable manual adjustment of the camera section and select settings such as NEG/POSI and/or BW/COLOUR when presenting the negative film. IRIS AUTO WHITE SET • The ON SCREEN Adjustment is performed using five different buttons : MENU/ENTER 5, button 1, button 2, button 3 and button 4. MENU/ENTER LIGHTING ENGLISH Operation Procedure ON-SCREEN ADJUSTMENT 1 2 3 4 5 (Example) When changing screen brightness adjustment to MANUAL setting: 1.
Functions Functions and setting values of the ON SCREEN ADJUSTMENT are as follows: Item Function AUTO WHITE BALANCE MODE : Automatically corrects tone of the image whenever the colour temperature changes in the environment where the equipment is used. MANUAL : Manually adjusts the image tone using the RED LEVEL and BLUE LEVEL. The Choices and Variable Range Initial Value AUTO, MANUAL AUTO RED LEVEL If MANUAL is selected, the red level is adjusted.
TROUBLE SHOOTING IPlease check the following list of possible problems and their solutions first. If you cannot solve the problem(s) after consulting the list, stop using the product at once and contact your retailer or the nearest JVC customer service. Check points No images • Check the power cord is properly plugged in.
SPECIFICATIONS GENERAL Power supply Power consumption Dimensions Mass INPUT/OUTPUT TERMINALS : AC100V – 120V, 50 Hz/60 Hz : 17W : During normal use: 450 × 605 × 585 mm (w/d/h) During storage : 450 × 605 × 230 mm (w/d/h) : 5.9 kg Control terminal : Remote input OPTICS SECTION Photographic lens Range Focusing limit Size(zoom) Focus Iris : F1.6 ~ F2.6, f = 4.0mm ~ 64mm ( ×16) : Max. 350 × 260mm and over (equiva lent of B4 landscape) Min.
AV-P720U VISUAL PRESENTER VICTOR COMPANY OF JAPAN, LIMITED is a registered Trademark owned by VICTOR COMPANY OF JAPAN, LTD. is a registered Trademark in Japan, the U.S.A., the U.K. and many other countries.