AV-H323115A 32" Class RM-C3416
Table of Contents Warning and precautions…………….…………….....…………………...………..……2 Important safety instructions ……………………………….....…….........………..……3 Warnings and cautions…………………………………………………………….…..….5 Technical specifcations…………………………………………………….……...……....6 Installation………………………………………………………………………....….…….7 Remote control………………………………………………………………….…...……12 Operation………………………………………………………………………...……..…13 Troubleshooting ………………………………………………………………..……...
WARNING AND PRECAUTIONS -2-
IMPORTANT SAFETY INSTRUCTIONS -3-
IMPORTANT SAFETY INSTRUCTIONS -4-
WARNINGS AND CAUTIONS Warning High voltages are used in the operation of this television receiver. Do not remove the cabinet back from your set. Refer servicing to qualified service personnel. Caution Do not trap the power supply cord under the television receiver. Caution Never stand on, lean on, or suddenly push the television or its stand. You should pay special attention to children. Serious injury may result if it should fall.
TECHNICAL SPECIFICATIONS Viewing Picture Size (Diagonal) Resolution Aspect Ratio 32" 1366 x 768 16 : 9 Brightness 200cd/m² Contrast Ratio 3000:1 TV System Input Power Voltage PAL-B/G, I, D/K SECAM-B/G , D/K , L DVB-T, DVB-T2 AC 100-240V 50/60Hz 48W Power Consumption Audio Output Power（THD 10%） 2x8W Signal Input High-Definition Multimedia Interface (HDMI) x 3 AV IN x 1 RJ45 x 1 USB x 2 ANT x 1 Signal Output HEADPHONE x 1 OPTICAL x 1 Unit Size 722x180x468mm Unit Size (Without Stand) 722x62x4
INSTALLATION INSTALLATION * Locate the TV where light does not shine onto the screen. * Total darkness or reflection on the screen can cause eyestrain. A soft lighting environment is recommended for comfortable viewing. * Allow ample space between the TV and wall for proper ventilation. * Do not locate the TV in a damp or hot environment to prevent damage. * To prevent damage whilst in use, do not cover ventilation openings.
INSTALLATION 200 * 100 M4 x 6 100 200 -8-
INSTALLATION FRONT PANEL KEYBOARD The control buttons on the TV are located on the bottom of the TV near the LED indicator. 3 1 2 ≤8m Bottom Control Key 1. 2. 3. 4. RM-C3416 1: 2: 3: Remote control sensor Indicator LED: RED Keyboard STANDBY 5. : Select the next channel or move up. : Increase the volume level or move right. : Decrease the volume level or move left. : When TV is on standby, press to turn on. When TV is on, press to enter the menu.
INSTALLATION ANTENNA Connect the ANT terminal on the back of the TV to a good quality outdoor antenna. Please note: Aerial connections:IEC(female). Input impendance:75 unbalanced. PRESET MODE (HDMI) RESOLUTION V.Freq.
INSTALLATION AV EQUIPMENT You can use the input terminals on TV set rear as follows: WAN 1 2 4 3 VIDEO EQUIPMENT W R Y Y W R Audio Receiver Audio/Video machine with HDMI interfaces HDMI1(ARC) (HDMI2.0 4Kx2K) It can be connected to the following appliances: VCR, multi disc player, DVD, camcorder, video game, stereo system, etc...
REMOTE CONTROL REMOTE CONTROL The remote control uses 2 x 'AAA' batteries (included). Please ensure correct polarities when inserting batteries. This is a Bluetooth remote control. In order to use all its features including voice control, please pair it with the TV as explained in 'Initial Setup' in the next page.
OPERATION INITIAL SETUP When you turn on your TV for the first time,the setup wizard will guide you through setting up basic settings. Please follow the on-screen instructions for first time setup Accept the Google Terms of Service to improve the product experience,select "Accept" to accept this condition. Press▼▲ to select the system language and press OK to confirm the language.
OPERATION Set a password for your TV to ensure security and privacy. Press▼▲to select whether to search,select "Scan" to search,select "Skip Scan" to skip the search. Press OK to display the on-screen keyboard,and use the remote control to enter the 4-digit password and automatically jump to the next interface. Press OK to complete the setup. Press the OK button to agree to (Disclaimer). After setting is complete,You can watch TV. Confirm the password again and keep it consistent.
OPERATION 2.Under Live TV,press the INPUT button to display the list of input sources.You can select the desired source. Inputs TV Composite Press BACK to return to the previous menu. If the main menu is displayed,pressing BACK will close the onscreen menu. Network & Internet 1.Press ▼▲button to select what you want set. 2.Press OK button to adjust. 3.After finishing your adjustment,press OK button to save and return to the previous menu. HDMI1 HDMI2 HDMI3 NAVIGATING THE ON-SCREEN MENU 1.
OPERATION ACCOUNTS&SIGN IN 1.Enter Menu->Settings->Channel->Channels. Sign in to your Google account, press the UP/DOWN button to select Sign in or Skip. APPS 2. Channel Scan directly enters the ATV+DTV automatic search platform interface of Antenna. Update Scan: Automatically search for frequency points outside the station. In this menu,you can set the APP permissions,and read the app lists. 1.Press▼▲button to select what you want set. 2.Press OK button to adjust. 3.
OPERATION DATE&TIME Automatic date&time Press▼▲button to select the option then press OK button to enter the sub-menu. (Optional:Use network-provided time,Off) LANGUAGE: Language :Press▼▲button to select the option then press OK button to enter the selected language. KEYBOARD Set date:Press▼▲button to select the option then press OK button to enter the sub-menu. Set time:Press▼▲button to select the option then press OK button to enter the sub-menu.
OPERATION PICTURE Inputs:Press▼▲button to select the option then press OK button to enter the sub-menu. HDMI control:Press▼▲button to select the option then press OK button to choose ON/OFF. Device auto power off:Press▼▲button to select the option then press OK button to choose ON/OFF. TV auto power on:Press▼▲button to select the option then press OK button to choose ON/OFF. HDMI EDID Version:show EDID version. CEC Device List:Press▼▲button to select the option then press OK button to enter the sub-menu.
OPERATION Sound style: Press▼▲button to select the option then press OK button to enter the sub-menu. (Optional:user, Standard,Vivid,Sports,Movie, Music,News) HOME SCREEN Balance: Press▼▲button to select the option.press◀to decrease the parameter.Press▶to increase the parameter. Sound Surround: Press▼▲button to select the option then press OK button to choose ON/OFF. Equalizer Detail: Press▼▲button to select the option then press OK button to enter the sub-menu.
OPERATION LOCATION CHROMECAST BUILT-IN Location status: Press▼▲button to select the option then press OK button to enter the sub-menu. (Optional:Use Wi-Fi to estimate location, Off). In this menu, you can read the information and settings of Chromecast. 1.Press▼▲button to select what you want set. 2.Press ok button to adjust. 3.After finishing your adjustment,Press BACK button to return to the previous menu.
OPERATION Captions: Press▼▲button to select the option then press OK button to enter the sub-menu. High contrast text: Press▼▲button to select the option then press OK button to choose ON/OFF. RESET Press OK button to enter the sub-menu. Reset-Erase everything. Important: This Reset will delete all the user-defined settings and downloaded apps. The TV will be restored to factory settings. In this menu, you can pair Bluetooth devices including your Bluetooth remote control. 1.
OPERATION EPG Under the Live TV, press the GUIDE key on the remote to open the EPG interface. Program information will be displayed,and you can operate the EPG menu through the Red/Yellow/Green/Blue key. Under the EPG menu, you can also press PVR key to set up recording schedule.
OPERATION RECORD When the program is playing, press the PVR key and the program will start to record. Note: A USB memory device must be connected to one of the USB ports in order to do any recording. Under the Live TV,press the menu key and down to select the Record menu. Select Record List,You can watch the recorded programs.
OPERATION Open the schedule list from the Record menu ,and pre recording details will be displayed.
TROUBLESHOOTING Symptom Picture Inspection Check Audio Distorted picture Normal Audio Antenna position, direction or connection Noise Electronic equipment, car/ motorcycle, fluorescent light Mute Volume(check if mute is activated or if the audio system connections are not correct) Interference Normal Picture Power cord is not inserted Power switch has not been turned on Contrast and brightness/volume setup Press Standby key on the remote control for inspection No Picture Mute No Colour Norma
Register your product at jvctv.com.
