® For model: AV-24F702 COLOR TELEVISION USER'S GUIDE TV CATV VCR DVD POWER STANDARD INPUT 1 2 BBE 4 5 DISPLAY 7 8 0 SLEEP TIMER C.C. 3 6 9 RETURN LIGHT AUDIO SELECT RM-C309G ENTER MUTING CH VOL VOL CH MENU EXIT – VCR CHANNEL + PREV NEXT REW REC VCR/DVD POWER TV/VCR PLAY STOP OPEN/CLOSE FF PAUSE POWER STILL/PAUSE TV IMPORTANT NOTE TO THE CUSTOMER: In the space below, enter the serial number for your television (located on the rear of the television cabinet).
The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
13. LIGHTNING To protect your unit during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges. 14. POWER LINES An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits.
FEATURES • Flat Picture Tube - It reduces the influence of surrounding light resulting in outstanding image detail and clarity. • 181 Channel Tuner - The tuning system is capable of receiving all 68 VHF/UHF standard broadcast channels that are available in your area. When operating on a cable system, it can tune to the standard VHF channel frequencies plus up to 113 cable channel frequencies. The actual number of channels received depends upon channel reception in your area or your cable system.
REMOTE CONTROL TV CATV VCR DVD POWER 11 1 STANDARD 2 12 INPUT 13 1 2 3 BBE 4 5 6 4 DISPLAY 7 8 9 5 SLEEP TIMER 0 RETURN 15 LIGHT 16 ENTER 17 3 C.C. AUDIO SELECT 6 7 8 RM-C309G MUTING + CH 18 VOL + VOL 19 CH 9 10 14 EXIT MENU VCR CHANNEL PREV NEXT REW REC VCR /DVD POWER TV/VCR PLAY 20 FF STOP PAUSE STILL/PAUSE OPEN/CLOSE TV 1. TV/CATV Switch - Used to select the TV or Cable Box to be operated.
REMOTE CONTROL (CONTINUED) BATTERY INSTALLATION BATTERY PRECAUTIONS 1. Slide the battery compartment cover in the direction of the arrow. The precautions below should be followed when using batteries in this device: 1. Use only the size and type of batteries specified. 2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device. To avoid a potential short circuit, insert the “–” end first. 3.
REMOTE CONTROL BASICS TV CATV VCR DVD POWER STANDARD INPUT 1 2 3 BBE 4 5 6 DISPLAY 7 8 9 0 RETURN SLEEP TIMER C.C. AUDIO SELECT LIGHT CHANGING THE BATTERIES RM-C309G ENTER MUTING + CH VOL + VOL CH EXIT MENU VCR CHANNEL PREV NEXT REW REC • Before you can operate the remote control, you must first install the batteries (included). See “Changing the Batteries” on this page above for instructions. (For an illustration, please see page 6.
REMOTE CONTROL (CONTINUED) REMOTE PROGRAMMING Setting the CATV, VCR and DVD Codes You can program your remote to operate your cable box, satellite receiver, VCR or DVD player by using the instructions and codes listed below. If the equipment does not respond to any of the codes listed below or to the code search function, use the remote control supplied by the manufacturer.
VCR setup The remote control is programmed with VCR codes for power on, power off, play, stop, fast-forward, rewind, pause, record, channel up, and channel down operation. 1) Find the VCR brand from the list of codes shown below. 2) Slide the first 2-way selector switch to “TV ”and the other 2-way selector switch to “VCR ”. 3) Press and hold down the DISPLAY button. 4) With the DISPLAY button held down, enter the first code number listed with the 10 key pad. 5) Release the DISPLAY button.
REMOTE CONTROL (CONTINUED) DVD setup The remote control is programmed with DVD codes for power on, power off, play, stop, fast-forward, rewind, previous chapter, next chapter, tray open/close, and still/pause operation. 1) Find the DVD player brand from the list of codes shown below. 2) Slide the first 2-way selector switch to “TV ” and the other 2-way selector switch to “DVD ”. 3) Press and hold down the DISPLAY button.
ANTENNA/CATV CONNECTIONS Combination VHF/UHF Antenna Single 75 ohm Cable 300 ohm Twin-lead Wire Take off the Splitter Splitter UHF Antenna 300-75 ohm Matching Transformer (not supplied) 300 ohm Twin-lead Wire IN OUT Y ANT(75Ω) VIDEO VIDEO PB L/MONO S-VIDEO AUDIO R VIDEO 1 PR VIDEO 2 L/MONO AUDIO R This television has an extended tuning range and can tune most cable channels without using a cable company supplied converter box.
CONNECTION TO OTHER EQUIPMENT The exact arrangement you use to interconnect various video and audio components to the TV is dependent on the model and features of each component. Check the User’s Guide provided with each component for the location of video and audio inputs and outputs. The connection diagrams in the following are offered as suggestions. You may need to modify them to accommodate your particular assortment of components.
SETTING LANGUAGE This TV can display the channel number, on-screen displays and picture adjustments on the screen in English, Spanish or French. On-screen language selection (step 3) will automatically appear on the screen when you press the MENU button initially. Select the language you prefer first, then proceed with the other menu options. 1 Press the MENU button. 2 Press the CH + (▲) or – (▼) button to select the LANGUAGE mode, then press the ENTER button.
TO MEMORIZE CHANNELS This TV is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV's memory. In addition to normal VHF and UHF channels, this TV can receive up to 113 Cable TV channels. To use this TV with an antenna, set the TV/CATV menu option to the TV setting. When shipped from the factory, this menu option is in the CATV setting.
TO MEMORIZE CHANNELS (CONTINUED) CH LABEL You can labal every channel up to 4 characters. Channel labels will appear over the channel number display each time you select a channel. Press the MENU button. 3 Press the CH + (▲) or – (▼) button until the indicator next to "CH SET-UP" begins to MENU CLOCK SET flash, then press the ENTER ON/OFF TIMER CH SET-UP button. PICTURE Go to step 7 when you select the "SET". Go to step 9 when you select the "CLEAR". 7 Now the bar for the first space is flashing.
SETTING V-CHIP (The V-CHIP function fitted this TV corresponds to the U.S. standard only.) This TV is fitted with a V-CHIP controller which provides you with channel viewing access controls and restrictions. This function is to prevent your children from watching violence or sexual scenes that may be harmful. 1 2 Press the MENU button and press the CH + (▲) or – (▼) button to select the V-CHIP SET option, then press the ENTER button.
TV BASIC OPERATION Before operate your TV select TV position of the TV/CATV switch on the remote to control the TV with the remote. 1 2 To turn on the TV, press the POWER button. CH 012 32 The sound level will be indicated on the TV screen by green bars and a number. As the sound level increases, so do the number of bars and the number on the screen. The same is true for decreasing the level. Set the TV/CATV menu option to the appropriate position.
INPUT button Selects the signal input source for the television or Video1,2,3 or Component for video devices like VCR's, DVD players, or camcorders. The input source changes as below. VIDEO 1 VIDEO1 TV VIDEO3 VIDEO2 COMPONENT STEREO AND SEPARATE AUDIO PROGRAM (SAP) The TV is equipped with a feature known as Multi-channel TV Sound or MTS. MTS broadcasts greatly enhance TV viewing by bringing you programs with high fidelity stereo sound.
PICTURE ADJUSTMENTS You can adjust the settings for color, sharpness, contrast, brightness, tint and component. 1 2 3 4 Press the VOL + ( ) or – ( ) button to adjust the setting. Press the MENU button. Press the CH + (▲) or – (▼) button until the indicator next to "PICTURE" begins to flash, then press the ENTER button.
CLOSED CAPTION WHAT IS CLOSED CAPTIONING? This television has the capability to decode and display Closed Captioned television programs. Closed Captioning will display text on the screen for hearing impaired viewers or it will translate and display text in another language. TO VIEW CLOSED CAPTIONS Press the C.C. button on the remote control to switch between normal TV and the two Closed Caption Modes (Captions and 1/2 of Full Screen Text).
ON/OFF TIMER ON TIMER SETTING This feature allows you to have the TV automatically turn "ON" at predetermined time. If you program the "ON" timer once the timer will turn "ON" the TV daily at the same time and to the same channel. If the power has been turned on at programmed time, the channel is changed to a programmed one. 1 Press the MENU button. 2 Press the CH + (▲) or CH – (▼) button until the indicator next to "ON/OFF TIMER" begins to flash, then press the ENTER button.
BBE By correcting the phase delay and distortion naturally generated by speaker systems, BBE ensures that the sound that reaches your ears is as natural as the original SONUD. Human voices are clearer and music is natural and well-defined. • BBE is a registered trademark of BBE Sound, Inc. For U.S., licensed from BBE Sound, Inc. under USP 4638258, 4482866 and 5510572. For Canada, licensed from BBE Sound, Inc. BBE is a registered trademark of BBE Sound, Inc.
TROUBLESHOOTING GUIDE Before requesting service, please refer to the following chart for the symptom and possible solution. SYMPTOMS POSSIBLE SOLUTIONS TV does not operate • Make sure the power cord is plugged in. • Try another AC outlet. • Power is off, check fuse or circuit breaker. • Unplug unit for an hour, then plug it back in. • Set the TV/VCR switch on the remote control correctly (See page 7). Poor sound or No sound • Station or CATV experiencing problems, tune to another station.
SPECIFICATIONS AC Power Input: AC Power Consumption: Picture Tube: Audio Power Output Rating: Speaker: Audio/Video Input: Tuner Type: Receiving Channels: VHF UHF CATV Antenna Input Impedance: Dimensions: Weight: 120 V, 60 Hz 137W 24" (measured diagonally) 5W+5W 2" x 4-3/4", 8 ohm x 2 COMPONENT Input: Y-Input: 1.0Vp-p, 75 ohm PB, PR-input: 0.7Vp-p, 75 ohm S-Video Input Y-Input: 1.0Vp-p, 75 ohm C-Input: 0.3Vp-p, 75 ohm Video Input: 1.