® For model: AV-20FD23 TV/DVD COMBO USER'S GUIDE TV CATV POWER DVD SUBTITLE CONTROL TITLE ZOOM REPEATA-B RETURN AUDIO PLAY MODE SLOW ANGLE 1 2 4 5 7 8 CANCEL DISPLAY INPUT 3 6 9 0 TV RETURN C.C. SLEEP TIMER AUDIO LIGHT RM-C394G SELECT /ENTER MUTING + CH VOL + VOL CH DVD SETUP TV MENU PREV NEXT TV/DVD DVD MENU B.SEARCH PLAY F.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
IMPORTANT SAFEGUARDS 1. READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. 2. RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. 3. HEED WARNINGS All warnings on the unit and in the operating instructions should be adhered to. 4. FOLLOW INSTRUCTIONS All operating and use instructions should be followed. 5. CLEANING Unplug this unit from the wall outlet before cleaning.
IMPORTANT SAFEGUARDS (Continued) 12. POWER-CORD PROTECTION Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. 13. LIGHTNING To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system.
26. SOUND DISTORTION Do not allow the product output distorted sound for a longtime. It may cause speaker overheating and fire. 27. HEADPHONES When you use the headphones, keep the volume at a moderate level. If you use the headphones continuously with high volume sound, it may cause hearing damage. 28. LASER BEAM Do not look into the opening of the disc tray or ventilation opening of the product to see the source of the laser beam. It may cause sight damage. 29.
Features Color TV With DVD/CD player Unique space saving design combines a 20" flat color TV and a DVD/CD player. The DVD disc has much more capacity, but is the same size as the audio CD disc. Picture/Audio quality of the DVD exceeds other software. Picture quality is higher than Super VHS. Audio quality is higher than audio CD. The DVD also has special options; audio language selection, subtitle language selection or multi-angle, etc. The DVD PLAYER can play back audio CDs.
IMPORTANT RECYCLING INFORMATION This product utilizes both a Cathode Ray Tube (CRT) and other components that contain lead. Disposal of these materials may be regulated in your community due to environmental considerations. For disposal or recycling information, please contact your local athorities, or the Electronic Industries Alliance: http://www.eiae.org Contents Before using your unit Advanced Function IMPORTANT SAFEGUARDS ................................ 3 Power source ..............................
Parts and functions Front Disc tray PREVIOUS button NEXT button OPEN/CLOSE button STOP button Power indicator Remote sensor POWER STOP PREVIOUS PLAY NEXT OPEN/CLOSE POWER VIDEO VOLUME CHANNEL POWER button HOW TO OPEN THE FRONT DOOR L/MONO AUDIO LINE 2 IN R AUDIO (L/R)/VIDEO IN jacks (LINE 2) Headphone Jack VOLUME +/– buttons PLAY button CHANNEL +/– buttons Rear AUDIO (L/R)/VIDEO IN jacks (LINE 1) AUDIO (L/R)/VIDEO OUT jacks COAXIAL DIGITAL AUDIO OUT jack AC power cord 8 5C20401AE(06-11
Remote control Page TV CATV POWER DVD SUBTITLE CONTROL TITLE ZOOM REPEATA-B RETURN AUDIO PLAY MODE SLOW ANGLE 1 2 3 CANCEL 4 5 6 DISPLAY 7 8 9 SLEEP TIMER INPUT 0 TV RETURN C.C. AUDIO LIGHT RM-C394G SELECT /ENTER MUTING + CH VOL + VOL CH DVD SETUP TV MENU PREV NEXT TV/DVD DVD MENU B.SEARCH PLAY F.
Remote control Inserting Batteries 1 Slide the battery compartment cover in the direction of the arrow. two "AA" batteries 2 Install 3 (supplied), paying attention to Replace the compartment cover. the polarity diagram in the battery compartment. BATTERY PRECAUTIONS The precautions below should be followed when using batteries in this device: 1. Use only the size and type of batteries specified. 2.
Antenna connections If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a cable TV service (CATV), see page 12 for Cable TV connections. Combination VHF/UHF Antenna (Single 75 ohm Cable or 300 ohm Twin-lead Wire) Connect the 75 ohm Cable from the Combination VHF/UHF Antenna to the Antenna Jack.
Cable TV connections This TV/DVD has an extended tuning range and can tune most cable channels without using a Cable TV Converter box. Some cable companies offer “premium pay channels” in which the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the cable company.
Setting the language You can choose from three different languages (English, French and Spanish) for the on-screen displays. Adjustment menus and messages will appear in the language of your choice. On-screen language selection (step 5) will automatically appear on the screen when you press the MENU button initially. Select the language you prefer first, then proceed with the other menu options. To turn on the TV/DVD, press POWER. The Power indicator 1 will light.
TV operation turn on the TV/DVD, press 1 To POWER. the volume level by 2 Adjust pressing VOL + or –. The volume TV CATV POWER DVD SUBTITLE CONTROL level will be indicated on the screen by green bars. As the volume level increases, so do the number of bars. If the volume decreases, the number of green bars also decreases. TITLE ZOOM REPEATA-B RETURN AUDIO PLAY MODE SLOW ANGLE 1 2 3 CANCEL 4 5 6 the Direct Channel selection 4 Press buttons to select the channel.
CHANNEL UP/DOWN TV CATV POWER DVD SUBTITLE CONTROL TITLE ZOOM REPEATA-B RETURN AUDIO PLAY MODE SLOW ANGLE 1 2 3 CANCEL 4 5 6 DISPLAY 7 8 9 INPUT 0 TV RETURN C.C. SLEEP TIMER AUDIO LIGHT RM-C394G SELECT /ENTER MUTING + CH VOL + VOL CH Press and release CH + or –. The channel automatically stops at the next channel set into memory. For proper operation, before selecting channels, they should be set into the memory.
Closed caption WHAT IS CLOSED CAPTIONING? This television has the capability to decode and display Closed Captioned television programs. Closed Captioning will display text on the screen for hearing impaired viewers or it will translate and display text in another language. TV CATV POWER DVD SUBTITLE CONTROL TITLE ZOOM REPEATA-B RETURN AUDIO PLAY MODE SLOW ANGLE 1 2 3 CANCEL 4 5 6 DISPLAY 7 8 9 INPUT 0 TV RETURN C.C.
To memorize channels This TV/DVD is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV/DVD’s memory. In addition to normal VHF and UHF channels, this TV/DVD can receive up to 113 Cable TV channels. To use this TV/DVD with an antenna, set the TV/CATV menu option to the TV mode. When shipped from the factory, this menu option is in the CATV mode.
AUTOMATIC MEMORY TUNING TV MENU in the TV mode. The TV menu screen 1 Press will appear. or until CHANNEL-SETUP 2 Press menu appears. TV CATV TV/CATV ADD/DELETE AUTO CH MEMORY POWER DVD SUBTITLE CONTROL TITLE ZOOM REPEATA-B RETURN AUDIO PLAY MODE SLOW ANGLE 1 2 3 CANCEL 4 5 6 DISPLAY 7 8 9 INPUT 0 TV RETURN C.C. SLEEP TIMER AUDIO LIGHT RM-C394G < / / / CATV ADD /MENU > or to select the “AUTO 3 Press or .
Setting the V-Chip An age limitation can be set to forbid children to see and hear violent scenes or pictures for adults, etc. The TV/DVD corresponds to "TV RATING" and "MOVIE RATING". To use the V-Chip function, you must register a password. TO REGISTER PASSWORD TV MENU in the TV mode. The TV menu 1 Press screen will appear.
Setting the V-Chip (Continued) TO SET THE V-CHIP SET menu, press 1 In theor V-CHIP to select the “US TV V-CHIP SET V-CHIP US TV RATING MOVIE RATING CAN ENG RATING CAN FRE RATING CHANGE PASSWORD RATING”.
Press or 5 CHIP”. Press to select “Vor to display “ON” to activate the V-Chip function. TV MENU until the MENU 6 Press screen is cleared. TV CATV POWER DVD SUBTITLE CONTROL TITLE ZOOM REPEATA-B RETURN AUDIO PLAY MODE SLOW ANGLE 1 2 3 CANCEL 4 5 6 DISPLAY 7 8 9 INPUT 0 TV RETURN C.C. SLEEP TIMER AUDIO V-CHIP SET V-CHIP TV RATING MOVIE RATING CAN ENG RATING CAN FRE RATING CHANGE PASSWORD < / / / : ON : TV-Y :G : OFF : OFF > /MENU TO CHANGE PASSWORD TV MENU in the TV mode.
Picture control adjustment Picture controls are factory preset but you can adjust them individually as follows: TV MENU in the TV mode. The TV menu 1 Press screen will appear. TV CATV POWER DVD SUBTITLE CONTROL TITLE ZOOM REPEATA-B RETURN AUDIO PLAY MODE SLOW ANGLE 1 2 3 CANCEL 4 5 6 DISPLAY 7 8 9 BRIGHTNESS CONTRAST COLOR TINT SHARPNESS < AUDIO / / /MENU BRIGHTNESS CONTRAST COLOR TINT SHARPNESS < INPUT / 0 +32 0 0 0 > or to select the item 3 Press you want to adjust.
Stereo and separate audio program (SAP) The TV/DVD is equipped with a feature known as Multi-channel TV Sound or MTS. MTS broadcasts greatly enhance TV viewing by bringing you programs with high fidelity stereo sound. MTS also provides an extra channel called the Separate Audio Program or SAP which broadcasters can use to transmit a second language for bilingual transmission or for other purposes.
Sound control adjustment Sound controls are factory preset but you can adjust them individually as follows: TV CATV POWER DVD SUBTITLE CONTROL TITLE ZOOM REPEATA-B RETURN AUDIO PLAY MODE SLOW ANGLE 1 2 3 CANCEL 4 5 6 DISPLAY 7 8 9 Press TV MENU in the TV mode. 1 The TV menu screen will appear. Press or until the AUDIO 2 menu appears. BASS TREBLE BALANCE < INPUT AUDIO SELECT /ENTER MUTING + CH VOL + VOL CH DVD SETUP TV MENU TV/DVD DVD MENU B.SEARCH PLAY F.
Disc The unit detects whether the disc loaded is a DVD disc or Audio CD and MP3-data which has been recorded on CD-R or CD-RW automatically sets the mode. Disc Notes Do not play DVD-ROM, DVD-Audio, DVD-R, DVD+R, DVD-RAM, CD-ROM, CDV, CD-G, Video CD or Photo CD to prevent accidental erasure of prerecorded material. This unit applies to DVD discs from Region 1 only. Other Region number discs cannot be played with this unit.
Setting setup language The setup language can be selected. TV CATV POWER DVD SUBTITLE CONTROL TITLE ZOOM REPEATA-B RETURN AUDIO PLAY MODE SLOW ANGLE 1 2 3 CANCEL 4 5 6 DISPLAY 7 8 9 INPUT • Insert the AC cord plug into a standard 120V 60Hz polarized AC outlet. Note: When connecting to other equipment, unplug the unit from the AC outlet. • Press POWER on the unit or on the remote control to turn on the unit. The POWER indicator will light.
Playback procedure OPEN/CLOSE on 1 Press the unit. The disc tray will TV CATV POWER DVD SUBTITLE CONTROL TITLE ZOOM REPEATA-B RETURN AUDIO PLAY MODE SLOW ANGLE 1 2 3 CANCEL 4 5 6 DISPLAY 7 8 9 INPUT 0 TV RETURN C.C. SLEEP TIMER AUDIO LIGHT RM-C394G SELECT /ENTER MUTING + CH CH DVD SETUP TV MENU TV/DVD DVD MENU B.SEARCH PLAY F.SEARCH OPEN/CLOSE STOP PAUSE/STILL Note: • If a non-compatible disc is loaded, "Incor- • • • • a disc onto the tray.
Special playback Note: there may be a slight delay between you pressing the button and the function activating. Fast Forward Playback Press F. SEARCH during normal playback. Each press of the F. SEARCH button will increase the speed of (x2), (x4), (x8), (x20). the search • To resume normal playback, press PLAY. TV CATV POWER DVD SUBTITLE CONTROL Review Playback TITLE ZOOM REPEATA-B RETURN AUDIO PLAY MODE SLOW ANGLE 1 2 3 CANCEL 4 5 6 DISPLAY 7 8 9 INPUT 0 TV RETURN C.C.
Zooming Zooming This unit will allow you to zoom in on the frame image. You can then make selections by switching the position of the frame. ZOOM during play1 Press back. TV CATV POWER DVD SUBTITLE CONTROL TITLE ZOOM REPEATA-B RETURN AUDIO PLAY MODE SLOW ANGLE 1 2 3 CANCEL 4 5 6 DISPLAY 7 8 9 INPUT Press / or / to view a different part of the frame. 2 You may move the frame from the centre position to UP, DOWN, LEFT or RIGHT direction. 0 TV RETURN C.C.
Repeat playback Title, Chapter, Track Playback Press PLAY MODE during playback or stop mode. DVD Press TV CATV POWER / or ENTER once or twice to select “Chapter” or “Title”. : Repeat Off /Enter/Play Mode Repeat : Chapter /Enter/Play Mode Repeat Title : /Enter/Play Mode DVD SUBTITLE CONTROL TITLE ZOOM REPEATA-B RETURN AUDIO PLAY MODE SLOW Audio CD ANGLE 1 2 3 CANCEL 4 5 6 DISPLAY 7 8 9 INPUT 0 TV RETURN C.C. SLEEP TIMER AUDIO LIGHT Press Press to select “Repeat”.
Program playback/Random playback (Audio CD) You can arrange the order of tracks on the disc. Program playback 1 Press PLAY MODE in the stop mode. Press / to select Play 2 Mode, then press / to Play Mode Repeat select program. TV CATV 1 2 3 POWER DVD SUBTITLE CONTROL Clear TITLE ZOOM REPEATA-B RETURN AUDIO PLAY MODE SLOW ANGLE 1 2 3 CANCEL 4 5 6 DISPLAY 7 8 9 INPUT 0 TV RETURN C.C.
MP3 playback This player can play back the MP3-data which has been recorded on CD-R or CDRW. To produce the MP3-data, you need a Windows-PC with CD-ROM drive and a MP3encoding Software (not supplied). The Apple-HFS-System can not be played. MP3 CD Information Limitations on MP3 CD playback • MP3 CD is the disc that is standardized by ISO9660, its file name must include 3-digits extension letters, “mp3”. • The directory and file names of the MP3 CD must be correspond to the ISO standardized files.
Changing soundtrack language / Subtitles Changing soundtrack language You can select the language when you play a multilingual disc. AUDIO during play1 Press back. TV CATV POWER DVD SUBTITLE CONTROL TITLE ZOOM REPEATA-B RETURN AUDIO PLAY MODE SLOW ANGLE 1 2 3 CANCEL 4 5 6 DISPLAY 7 8 9 C.C. SLEEP TIMER INPUT 2/8 Fra DolbyDigital The current soundtrack language will appear. AUDIO repeatedly 2 Press until the desired language 1/8 Eng DolbyDigital is selected.
Changing angles / Title selection / DVD menu Changing Angles When playing back a disc recorded with multi-angle facility, you can change the angle that you are viewing the scene from. ANGLE during play1 Press back. TV CATV The current angle will appear. DVD SUBTITLE CONTROL TITLE ZOOM REPEATA-B RETURN AUDIO PLAY MODE SLOW ANGLE 1 2 3 CANCEL 4 5 6 DISPLAY 7 8 9 0 TV RETURN C.C. SLEEP TIMER INPUT 1/9 POWER AUDIO ANGLE repeatedly until the desired angle is se2 Press lected.
Parental control setting Some discs are specified not suitable for children. Such discs can be limited not to play back with the unit. DVD SETUP in the stop mode. 1 Press Press or to select “Parental”. Then press TV CATV Language Picture Sound Parental Other or ENTER.
To change the parental level Press DVD SETUP in the stop mode or No Disc. 1 Press or to select “Parental”. Then press TV CATV Language Picture Sound Parental Other or ENTER. ZOOM REPEATA-B RETURN AUDIO PLAY MODE SLOW ANGLE 1 2 3 CANCEL 4 5 6 DISPLAY 7 8 9 INPUT number buttons 2 Press (0-9) to enter the password you have stored. Language Picture Sound Parental Other Password Parental 1234 1 0 9/Cancel /Enter/Setup/Return 0 TV RETURN C.C.
Temporary disabling of rating level by DVD disc Depending on the DVD disc, the disc may try to temporarily cancel the rating level that you have set. It is up to you to decide whether to cancel the rating level or not. TV CATV POWER DVD SUBTITLE CONTROL TITLE ZOOM REPEATA-B RETURN AUDIO PLAY MODE SLOW ANGLE 1 2 3 CANCEL 4 5 6 DISPLAY 7 8 9 the unit (see P.27).
Setting the aspect ratio of TV screen You can select the aspect ratio for your TV. 1 Press DVD SETUP in the stop mode or No Disc. Press or “Picture”. TV CATV to select Language Picture Sound Parental Other POWER DVD SUBTITLE CONTROL /Enter/Setup/Return TITLE ZOOM REPEATA-B RETURN AUDIO PLAY MODE SLOW ANGLE 1 2 3 CANCEL 4 5 6 DISPLAY 7 8 9 INPUT or ENTER, then press or to select “Tv Screen”.
Setting on Screen display/Status display of Disc On screen display can be switched on or off when you press the buttons. 1 Press DVD SETUP in the stop mode or No Disc. Press or “Picture”. TV CATV to select Language Picture Sound Parental Other POWER DVD SUBTITLE CONTROL /Enter/Setup/Return TITLE ZOOM REPEATA-B RETURN AUDIO PLAY MODE SLOW ANGLE 1 2 3 CANCEL 4 5 6 DISPLAY 7 8 9 2 Press or ENTER, then press or to select “Display”.
Setting menu language You can select the language of the disc menu messages of DVDs. 1 Press DVD SETUP in the stop mode or No Disc. Press or “Language”. TV CATV to select Language Picture Sound Parental Other POWER DVD SUBTITLE CONTROL TITLE ZOOM REPEATA-B RETURN AUDIO PLAY MODE SLOW ANGLE 1 2 4 CANCEL 3 5 6 /Enter/Setup/Return 2 Press press or ENTER, then or to select “Menu”. 7 DISPLAY 9 Menu Subtitle Audio 0 TV RETURN C.C.
Setting subtitle language The same subtitle language can always be selected even if you replace the disc or turn the power off. Press DVD SETUP in the stop mode or No Disc. 1 Press or to select “Language”. Language Picture Sound Parental Other TV CATV POWER DVD SUBTITLE CONTROL TITLE ZOOM REPEATA-B RETURN AUDIO PLAY MODE SLOW ANGLE 1 2 3 CANCEL 4 5 6 DISPLAY 7 8 9 INPUT 2 Press or ENTER, then press or to select “Subtitle”.
Setting audio soundtrack language The same audio soundtrack language can always be selected by your unit even if you replace the disc or turn the power off. TV CATV Press DVD SETUP in the stop mode or No Disc. 1 Press or to select Language Picture Sound Parental Other “Language”. POWER DVD SUBTITLE CONTROL /Enter/Setup/Return TITLE ZOOM REPEATA-B RETURN AUDIO PLAY MODE SLOW ANGLE 1 2 3 Press 2 press or ENTER, then or to select “Audio”.
Dynamic Range Control (DRC) DRC (Dynamic Range Control) enables you to control the dynamic range so as to achieve a suitable sound for your equipment. TV CATV DVD SETUP in the stop mode. 1 Press Press or to select “Sound”. Language Picture Sound Parental Other POWER DVD SUBTITLE CONTROL TITLE ZOOM REPEATA-B RETURN AUDIO PLAY MODE SLOW ANGLE 1 2 3 CANCEL 4 5 6 DISPLAY 7 8 9 INPUT Press or ENTER to 2 select “DRC”. 0 TV RETURN C.C.
Connections to other equipments The exact arrangement you use to interconnect various video and audio components to the TV/DVD is dependent on the model and features of each component. Check the Owner's Manual provided with each component for the location of video and audio inputs and outputs.
Using the audio/video inputs If you connect the TV/DVD to VCR, camcorder or TV game, you can select by pressing INPUT. NOTE: Press INPUT repeatedly to select the desired mode. “LINE1”, “LINE2” or TV channel will display on the screen for 4 seconds. In the DVD mode this key will not operate. LINE 1 TV Channel LINE 1 (Back) LINE 2 (Front) 1. To connect the TV/DVD to a VCR Press the INPUT to select the desired mode to use the TV as a monitor. Operate your VCR as usual.
Problems and troubleshooting Use the following check list for troubleshooting when you have problems with your unit. Consult your local dealer or service outlet if problems persist. Be sure all connections are properly made when using with other units. SYMPTOMS POSSIBLE SOLUTIONS PAGE POWER • Make sure the power cord is plugged in. • Try another AC outlet. • Power is off, check fuse or circuit breaker. • Unplug unit, then plug it back in.
SYMPTOMS POSSIBLE SOLUTIONS PAGE DVD Playback doesn’t start. • No disc is inserted. • The disc may be dirty. Clean up the disc. • The unit cannot play CD-ROMs, etc. 27 25 – No picture • TV/AV selector is not set correctly. 26 No sound • Check the input selector of the amplifier is set properly. • The unit is in the Special playback mode. • Select the correct Audio Output position on AV amplifier. – 28 44 Picture is distorted during CUE or REVIEW. • The picture will be distorted occasionally.
Reception disturbances Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF antenna. Outdoor antennas are recommended for best results. The most common types of television interference are shown below. If one of these symptoms appear when the TV/DVD is connected to a Cable TV system, the disturbance may be caused by the local Cable TV company broadcast. IGNITION Black spots or horizontal streaks may appear, the picture may flutter or drift.
Language Code List Enter the appropriate code number for the initial settings "AUDIO", "SUBTITLE" and/or "MENU LANGUAGE" (see pages 40-42).
Specifications GENERAL Power supply: Power consumption: Weight: Dimensions: TELEVISION Picture tube: Tuner type: Receiving channels: Antenna input: Speaker: Audio output power: DVD/CD player Signal system: Applicable disc: Audio characteristics: Frequency response: S/N Ratio: Harmonic distortion: Wow and flutter: Dynamic range: Input/Output: Headphone Jack: Digital audio out: Pickup: ACCESSORIES: AC 120V 60Hz Operation: 110W Stand by: 5W 56.1lbs (25.
Appendix (Remote programming) REMOTE PROGRAMMING Setting the CATV Codes You can program your remote to operate your cable box, satellite receiver by using the instructions and codes listed below. If the equipment does not respond to any of the codes listed below or to the code search function, use the remote control supplied by the manufacturer.
JVC COMPANY OF AMERICA Division of U.S. JVC CORP. 1700 Valley Road Wayne, New Jersey 07470 JVC CANADA, INC.
® For model: AV-20FD23 TV/DVD COMBO USER'S GUIDE TV CATV POWER DVD SUBTITLE CONTROL TITLE ZOOM REPEATA-B RETURN AUDIO PLAY MODE SLOW ANGLE 1 2 4 5 7 8 CANCEL DISPLAY INPUT 3 6 9 0 TV RETURN C.C. SLEEP TIMER AUDIO LIGHT RM-C394G SELECT /ENTER MUTING + CH VOL + VOL CH DVD SETUP TV MENU PREV NEXT TV/DVD DVD MENU B.SEARCH PLAY F.
ATTENTION RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR ATTENTION: AFIN DE REDUIRE LES RISQUES DE CHOC ELECTRIQUE, NE PAS RETIRER LE COUVERCLE (OU LE PANNEAU ARRIERE). AUCUNE PIECE NE PEUT ETRE REPAREE PAR L'UTILISATEUR. CONFIEZ L'APPAREIL A UN TECHNICIEN QUALIFIE.
IMPORTANTES MESURES DE SECURITE 1. Lisez les instructions Lisez attentivement toutes les instructions sur le fonctionnement et la sécurité avant de mettre l'appareil en marche. 2. Conservez les instructions Gardez les instructions, pour vous y référer plus tard, au besoin. 3. Tenez compte de ces mises en garde Toutes les mises en garde imprimées sur l'appareil ou contenues dans le manuel d'instructions doivent être observées. 4.
IMPORTANTES MESURES DE SECURITE (SUITE) 14. Lignes de haute tension L'antenne extérieure ne doit pas être placée à proximité de lignes d'alimentation aériennes ni de circuits de courant, ni de telle façon qu'elle puisse toucher ces lignes ou circuits en tombant. Pendant l'installation de l'antenne extérieure, il faut être très prudent de ne pas toucher ces lignes ou circuits car leur contact peut être fatal. 15.
26. Distortion sonore Le produit de ne doit pas produire un son déformé pendant longtemps. Sinon, le haut-parleur risque de surchauffer ou de brûler. 27. Écouteurs Quand vous utilisez les écouteurs, maintenez le volume à un niveau modéré. Si vous utilisez les écouteurs continuellement à un volume sonore élevé, l'ouïe peut être affectée. 28. Faisceau laser Il ne faut pas regarder à l'intérieur de l'ouverture du compartiment à disque ou de la ventilation de l'appareil pour regarder le faisceau laser.
Caractéristiques Télécouleur avec lecture DVD/CD audio Conception unique en son genre pour économiser l'espace qui combine un plat 20” de télécouleur et un lecture DVD/CD audio. Le disque DVD a une très grande capacité quoique sa taille soit celle d’un CD audio. La qualité de l’image et du son du DVD est supérieure à celle des autres supports. L’image est meilleure que celle du Super VHS, et la qualité du son est plus grande que celle du CD audio.
IMPORTANTES INFORMATIONS DE RECYCLAGE Ce produit utilise à la fois un tube cathodique et d’autres composants qui contiennent du plomb. Il se peut que l’évacuation de ces matériaux soit réglementée dans votre communauté afin de protéger l’environnement. Pour de plus amples renseignements sur l’évacuation ou le recyclage, veuillez contacter vos autorités locales ou l’association Electronic Industries Alliance à http:// www.eiae.
Commandes et fonctions VUE AVANT Touche précédent (PREVIOUS) Touche d'arrêt (STOP) Conpartiment disque Touche suivant (NEXT) Voyant d’alimentation (POWER) Touche ouverture/ fermeture (OPEN/CLOSE) Capteur de la télécommande POWER STOP PREVIOUS PLAY NEXT OPEN/CLOSE POWER VIDEO VOLUME CHANNEL Interrupteur (POWER) R Prises d'entrée AUDIO (L/R) / VIDEO (LINE 2) Prise d'écouteur (HEADPHONE) COMMENT OUVRIR LE PANNEAU FRONTAL L/MONO AUDIO LINE 2 IN Commandes de volume Touche de lecture (PLAY) (V
Télécommande Page TV CATV POWER DVD SUBTITLE CONTROL TITLE ZOOM REPEATA-B RETURN AUDIO PLAY MODE SLOW ANGLE 1 2 3 CANCEL 4 5 6 DISPLAY 7 8 9 INPUT AUDIO LIGHT RM-C394G SELECT /ENTER MUTING + CH VOL + VOL CH DVD SETUP TV MENU PREV NEXT Touche STANDBY/MARCHE-ARRET 13,14 RETURN Fait disparaître le menu de configuration DVD 35-43 REPEAT A-B Répéter la lecture entre A et B 30 SUBTITLE Sous-titres 33 TITLE Sélection du titre 34 ZOOM Zoom 29 AUDIO (pour la télévisio
Télécommande INSERTION DES PILES 1 Ouvrez le couvercle du compartiment à piles en le faisant glisser dans la direction de la flèche. deux piles "AA" en 2 Insérez observant leurs polarités, tel 3 Fermez le couvercle. qu'indiqué sur le diagramme. PRECAUTIONS A PRENDRE AVEC LES PILES Quand cet appareil est alimenté par des piles, vous devez observer les précautions suivantes: 1. Utilisez seulement des piles de format et de genre spécifiés. 2.
Raccordements des antennes Si vous utilisez une antenne intérieure ou extérieure (non fourni), suivez les directives ci-dessous, qui correspondent à votre genre d'antenne. Si vous êtes abonné à un service de câblodistribution (CATV), voyez les directives de la page 12. Antenne combinée VHF/UHF (câble unique de 75 ohms ou fil jumelé de 300 ohms) Raccordez le câble de 75 ohms de l'antenne combinée VHF/UHF à la prise d'antenne.
Raccordements a la câblodistribution Ce TV/DVD a une gamme de syntonisation étendue et peut capter la plupart des canaux sans utiliser un convertisseur. Certaines compagnies de câblodistribution permettent le visionnement de "canaux payants" dont le signal est brouillé. Pour regarder ces signaux, un débrouilleur, en général fourni par la compagnie, est nécessaire.
Choix de la langue Vous pouvez choisir parmi les trois langues suivantes (Anglais, Français et Espagnol) pour l’affichage à l’écran. Les menus et les messages de réglage apparaîtront dans la langue de votre choix. Le choix de la langue d’affichage à l’écran (opération 5) se présente à vous, automatiquement, lorsque vous appuyez initialement sur la touche MENU. Tout d’abord, choisissez la langue que vous désirez puis passez aux autres options offertes par le menu.
Fonctionnement du télécouleur mettre l'appareil en circuit, 1 Pour pressez l'interrupteur (POWER). le volume au niveau 2 Réglez désiré en pressant les touches de TV CATV POWER DVD SUBTITLE CONTROL TITLE ZOOM REPEATA-B RETURN AUDIO PLAY MODE SLOW ANGLE 1 2 3 CANCEL 4 5 6 DISPLAY 7 8 9 INPUT le menu de sélection de 3 Réglez mode TV/CATV à la position 0 TV RETURN C.C.
TOUCHES DE SELECTION DE CANAUX + ET – TV CATV POWER DVD SUBTITLE CONTROL TITLE ZOOM REPEATA-B RETURN AUDIO PLAY MODE SLOW ANGLE 1 2 3 CANCEL 4 5 6 DISPLAY 7 8 9 Pressez et relâchez la touche CH + ou –. L'appareil passe automatiquement au prochain canal mis en mémoire. Pour obtenir de bons résultats, avant de choisir les canaux, ils doivent être mis dans la mémoire du télécouleur. Voyez la section sur la “Mise en memoire des canaux”, aux pages 17 et 18.
Sous-titrage QUE SIGNIFIE SOUS-TITRAGE? Ce télécouleur a la capacité de décoder et d'afficher les émissions télévisées avec sous-titres. Ce genre d'émissions affichent un texte sur l'écran pour les téléspectateurs malentendants, ou traduisent et affichent le texte en une autre langue. Sous-titres (CAPTIONS): Ce mode fait afficher le texte à l'écran en anglais ou en une autre langue (suivant le réglage du sélecteur canaux 1 ou canaux 2).
Mise en mémoire des canaux Les canaux disponibles dans votre région peuvent être programmés dans la mémoire de ce TV/DVD. Ce qui permet de balayer tous les canaux mémorisés, en ordre croissant/décroissant, à partir du canal présent, ou de sauter les canaux non désirés. Avant de choisir les canaux, ils doivent avoir été mis en mémoire. En plus de recevoir les canaux VHF et UHF, votre nouvel appareil peut aussi capter jusqu'à 113 canaux câblodistribués.
SYNTONISATION AUTOMATIQUE DES CANAUX PROGRAMMES EN MEMOIRE la touche TV MENU dans le mode TV. 1 Pressez Le menu TV apparaît à l'écran. sur ou jusqu’à ce 2 Appuyez que le menu PROG. CNL TV CATV POWER apparaisse. DVD SUBTITLE CONTROL TITLE ZOOM REPEATA-B RETURN AUDIO PLAY MODE SLOW ANGLE 1 2 3 CANCEL 4 5 6 DISPLAY 7 8 9 INPUT AUDIO < / / / /MENU > la touche ou pour 3 Pressez choisir le mode “AUTO CNL MEMO”, 0 TV RETURN C.C.
Utilisation de la Puce V Une limitation d’âge peut être réglée pour interdire aux enfants de regarder et d’entendre les scènes violentes, les images pour adultes, etc. Le TV/DVD possède les classifications "CLASS. PROG. TV" et "CLASS. FILM". Pour utiliser la fonction puce V, programmez d’abord un mot de passe. POUR PROGRAMMEZ UN MOT DE PASSE la touche TV MENU dans le mode TV. 1 Pressez Le menu TV apparaît à l'écran.
Utilisation de la Puce V (Suite) POUR RÉGLER LA PUCE V le menu REGLAGE PUCE 1 Dans V, appuyez sur la touche ou REGLAGE PUCE V V-CHIP CLASS. PROG. TV CLASS. FILM CLASS. CAN ANG CLASS. CAN FRA CHANGE. MOT DE PASSE pour choisir la classification “CLASS. PROG. TV”. TV CATV POWER DVD SUBTITLE CONTROL TITLE ZOOM REPEATA-B RETURN AUDIO PLAY MODE SLOW ANGLE 1 2 3 CANCEL 4 5 6 DISPLAY 7 8 9 INPUT 0 TV RETURN C.C.
Pressez la touche ou pour 5 choisir le mode V-CHIP. Pressez REGLAGE PUCE V V-CHIP CLASS. PROG. TV CLASS. FILM CLASS. CAN ANG CLASS. CAN FRA CHANGE. MOT DE PASSE la touche ou pour afficher “ON” pour mettre ne service la fonction V-CHIP. de nouveau la touche 6 Pressez TV MENU jusqu'à ce que l'écran < / / / : ON : TV-Y :G : OFF : OFF > /MENU MENU disparaisse.
Ajustements de l’image Les commandes de réglage de l'image ont été préréglées à l'usine, mais vous pouvez les régler individuellement comme suit. la touche TV MENU dans le mode TV. 1 Pressez Le menu TV apparaît à l'écran. TV CATV POWER DVD SUBTITLE CONTROL sur ou jusqu’à 2 Appuyez ce que le menu IMAGE apparaisse.
Stéréophonie et canal son séparé (SAP) Ce TV/DVD est doté des circuits MTS (Multi-channel TV Sound). Les circuits MTS augmentent le plaisir de la télévision puisque la stéréophonie devient possible.
Ajustement des réglages sonores Les réglages sonores ont été réalisés en usine mais vous pouvez les modifier à votre guise de la manière suivante. TV CATV POWER DVD SUBTITLE CONTROL la touche TV MENU. 1 Pressez Le menu TV apparaît à l'écran. sur ou jusqu’à 2 Appuyez ce que le menu AUDIO apparaisse.
A propos du disque Le lecteur détecte quel genre de disque a été chargé (DVD, CD AUDIO) , les données MP-3 qui ont été enregistrées sur CD-R ou CD-RW et adapte automatiquement les spécificités correspondantes. Conseils Ne pas utiliser de DVD ROM, DVD AUDIO, DVD-R, DVD+R, DVD-RAM, CD ROM, CDV, CD-G, CD vidéo et CD photo pour éviter l’endommagement des disques. Cet appareil accepte les disques DVD en code régional 2. Aucun autre code ne peut être utilisé.
Sélection de la langue Vous pouvez sélectionner la langue de configuration. TV CATV POWER DVD SUBTITLE CONTROL TITLE ZOOM REPEATA-B RETURN AUDIO PLAY MODE SLOW ANGLE 1 2 3 CANCEL 4 5 6 DISPLAY 7 8 9 INPUT la touche TV/DVD 1 Pressez pour choisir le mode DVD. “Lecture” modifications “Pas de disque”. (Si le disque DVD est déjà chargé, la lecture commence automatiquement.) 0 TV RETURN C.C.
Lecture en mode basique sur OPEN/ 1 Appuyez CLOSE de l'appareil. TV CATV POWER DVD SUBTITLE CONTROL TITLE ZOOM REPEATA-B RETURN AUDIO PLAY MODE SLOW ANGLE 1 2 3 CANCEL 4 5 6 DISPLAY 7 8 9 INPUT 0 TV RETURN C.C. SLEEP TIMER AUDIO LIGHT RM-C394G SELECT /ENTER MUTING + CH VOL + VOL CH DVD SETUP TV MENU PREV NEXT TV/DVD DVD MENU B.SEARCH PLAY F.SEARCH OPEN/CLOSE STOP PAUSE/STILL Remarques: • Si un disque non compatible est chargé, "Ce Disque Ne Peut Etre Lu.
Lecture en modes spéciaux Remarque: un léger retard peut se manifester après que vous ayez appuyé sur le bouton pour activer la fonction. Lecture rapide Appuyez sur F. SEARCH pendant la lecture normale. À chaque fois que vous appyez sur F. SEARCH, la vitesse de recherche augmente par (x2), (x4), (x8), (x20). • Pour reprendre la lecture normale, appuyez sur PLAY.
Zoom Zoom Cet appareil vous permet de faire un zoom avant sur l'image. Ensuite, vous pouvez effectuer les sélections en changeant la position de l'image. la touche ZOOM 1 Pressez pendant la lecture. TV CATV POWER DVD SUBTITLE CONTROL TITLE ZOOM REPEATA-B RETURN AUDIO PLAY MODE SLOW ANGLE 1 2 3 CANCEL 4 5 6 DISPLAY 7 8 9 INPUT 0 TV RETURN C.C. SLEEP TIMER AUDIO 1 Vous ferez un zoom avant sur la partie centrale de l'image.
Lecture répétée Titre, Chapitre, Lecture de piste Appuyez sur PLAY MODE pendant la lecture ou le mode d'arrêt. DVD Appuyez sur / ou ENTER une ou deux fois pour sélectionner “Chapitre” ou “Titre”. TV CATV POWER DVD SUBTITLE CONTROL TITLE ZOOM REPEATA-B RETURN AUDIO PLAY MODE SLOW ANGLE 1 2 3 CANCEL 4 5 6 DISPLAY 7 8 9 INPUT AUDIO Repetition : Chapitre /Enter/Play Mode Repetition Titre : /Enter/Play Mode CD audio 0 TV RETURN C.C.
Lecture en ordre programmé/Lecture au hasard (CD audio) Vous pouvez arranger l'ordre des pistes sur le disque. Lecture programmée 1 Appuyez sur le PLAY MODE dans le mode stop. sur / pour 2 Appuyez sélectionner Play Mode, TV CATV POWER DVD SUBTITLE CONTROL TITLE ZOOM REPEATA-B RETURN AUDIO PLAY MODE SLOW ANGLE 1 2 3 CANCEL 4 5 6 DISPLAY 7 8 9 INPUT 0 TV RETURN C.C.
Lecture de fichiers MP3 Ce lecteur peut lire les données MP3 qui sont enregistrées sur CD-R ou CD-RW. Pour produire les données MP3, il vous faut disposer d'un PC Windows comportant un graveur de CD-ROM et un logiciel de codage MP3 (non fourni). Le système Apple HFS ne peut pas être lu. sur OPEN/CLOSE. 1 Appuyez Le compartiment à disque s'ouvre. Informations concernant les CD de fichiers MP3 disque se ferme automatiquement.
Sélection d’une autre langue pendant la lecture/Sélection de la langue des sous titress Selection d’une autre langue pendant la lecture Vous pouvez sélectionnez la langue quand vous passez un disque multilingue. sur AUDIO pen1 Appuyez dant la lecture. TV CATV POWER DVD SUBTITLE CONTROL TITLE ZOOM REPEATA-B RETURN AUDIO PLAY MODE SLOW ANGLE 1 2 sur AUDIO à 2 Appuyez plusieurs reprises jusqu'à ce que la langue voulue soit sélectionnée. 4 5 6 DISPLAY 7 8 9 SLEEP TIMER INPUT C.C.
Changement de l’angle de caméra / Sélection du titre / Menu DVD Modifications des angles Quand vous passez un disque enregistré avec une fonction multi-angles, vous pouvez modifier l'angle de vue de la scène. sur ANGLE pen1 Appuyez dant la lecture. TV CATV L'angle actuel s'affiche. DVD SUBTITLE CONTROL TITLE ZOOM REPEATA-B RETURN AUDIO PLAY MODE SLOW ANGLE 1 2 3 CANCEL 4 5 6 DISPLAY 7 8 9 0 TV RETURN C.C.
Réglage des différents niveaux de blocage Certains disques ne conviennent pas aux enfants. Ces disques peuvent être limités pour ne pas fonctionner avec l'appareil. TV CATV Appuyez sur DVD SETUP dans le mode d'arrêt. 1 Appuyez sur ou pour sélectionner Parental. Puis appuyez sur ou ENTER.
Pour modifier le niveau parental sur DVD SETUP dans le mode d'arrêt ou Pas 1 Appuyez de disque. Appuyez sur or pour sélectionner “Parental”. Ensuite, appuyez sur ou ENTER. Langue Image Son Parental 0 TV CATV ZOOM REPEATA-B RETURN AUDIO PLAY MODE SLOW ANGLE 1 2 3 CANCEL 4 5 6 7 8 9 DISPLAY INPUT AUDIO LIGHT 1 /Enter/Setup/Return sur les touches 2 Appuyez numérotées (0-9) pour ta- 0 TV RETURN C.C.
Fonction d’annulation temporaire du verrouillage parental dans le disque DVD Il se peut que le disque DVD essaie d’annuler temporairement le niveau parental que vous avez défini. C’est à vous de voir si vous voulez annuler le niveau parental ou non. TV CATV POWER DVD SUBTITLE CONTROL TITLE ZOOM REPEATA-B RETURN AUDIO PLAY MODE SLOW ANGLE 1 2 3 CANCEL 4 5 6 DISPLAY 7 8 9 OPEN/CLOSE sur l’unité (voir P.27).
Réglage du format écran Vous pouvez sélectionner le format de l'image pour votre téléviseur. sur DVD SETUP dans le mode d'arrêt ou Pas de 1 Appuyez disque. Appuyez sur ou pour sélectionner “Image”. TV CATV Langue Image POWER ZOOM REPEATA-B RETURN AUDIO PLAY MODE SLOW ANGLE 1 2 3 CANCEL 4 5 6 DISPLAY 7 8 9 INPUT 2 Appuyez sur ou ENTER, puis appuyez sur ou pour sélectionner “Ecran Tv”. Langue Image Son Parental Ecran Tv 4:3 OSD Marche Autres /Enter/Setup/Return 0 TV RETURN C.
Réglage de l’affichage/Affichage d'état disque Vous pouvez activer ou désactiver l'affichage à l'écran quand vous appuyez sur les commandes. TV CATV sur DVD SETUP dans le mode d'arrêt ou Pas de 1 Appuyez disque. Appuyez sur ou pour sélectionner “Image”.
Sélection de la langue du Menu Vous pouvez sélectionner la langue des messages du menu disque DVD. sur DVD SETUP dans le mode d'arrêt ou Pas de 1 Appuyez disque. Appuyez sur ou pour sélectionner “Langue”. TV CATV Langue Image Son Autres POWER DVD SUBTITLE CONTROL /Enter/Setup/Return TITLE ZOOM REPEATA-B RETURN AUDIO PLAY MODE SLOW ANGLE 1 2 3 CANCEL 4 5 6 sur ou ENTER, 2 Appuyez puis appuyez sur ou pour sélectionner “Menu”.
Sélection de la langue des sous-titres La même langue de sous-titrage peut toujours être sélectionnée même si vous remplacez le disque ou que vous éteignez l'appareil. TV CATV sur DVD SETUP dans le mode d'arrêt ou Pas de 1 Appuyez disque. pour Appuyez sur ou sélectionner “Langue”.
Sélection de la langue du film La même langue de bande sonore peut toujours être sélectionnée par votre appareil même si vous remplacez le disque ou que vous éteignez l'appareil. TV CATV sur DVD SETUP dans le mode d'arrêt ou Pas de 1 Appuyez disque. ou pour Appuyez sur sélectionner “Langue”. Langue Image Son Autres POWER DVD SUBTITLE CONTROL /Enter/Setup/Return TITLE ZOOM REPEATA-B RETURN AUDIO PLAY MODE SLOW ANGLE 1 2 3 sur ou ENTER, 2 Appuyez puis appuyez sur ou pour sélectionner “Audio”.
Dynamique audio (contrôleT de la gamme d’amplification) La fonction DRC (Dynamique audio contrôle de la gamme d’amplification) vous permet de contrôler la gamme d’amplification dynamique afin d’obtenir un son adapté à votre équipement. sur DVD SETUP 1 Appuyez dans le mode d'arrêt. Langue Image Son Parental Autres ou Appuyez sur pour sélectionner “Son”.
Connexion à un autre appareil La configuration exacte des liaisons entre les divers appareils audio et vidéo et le TV/DVD, dépend du modèle et des particularités de chacun. Pour connaître l'emplacement des entrées et des sorties audio et vidéo, reportez-vous au mode d'emploi qui est fourni avec chaque appareil.
Using the audio/video inputs Si vous reliez le TV/DVD au magnétoscope, au caméscope,au à un jeu vidéo ou DVD, vous pouvez choisir l’appareil au moyen de la touche INPUT. Appuyez plusieurs fois sur la touche INPUT pour choisir le mode désiré. “LINE1”, “LINE2” ou TV canal s’affiche sur l’écran pendant 4 secondes. LINE 1 TV Canal LINE 1 (Arrière) LINE 2 (Avant) REMARQUE: Cette touche ne fonctionne pas dans le mode DVD. 1.
Problèmes et anomalies Vérifier avant tout que les connexions avec les autres équipements sont bien faites. La liste ci-dessous peut s’avérer utile dans le cas de problèmes mineurs. Si les problèmes persistent, il est important de consulter la station technique la plus proche. SYMPTÔME SOLUTION POSSIBLE PAGE • Assurez-vous que le cordon d'alimentation soit branché. • Essayez une autre prise. • Il n'y a pas de courant. Vérifiez le fusible ou le disjoncteur.
SYMPTÔME SOLUTION POSSIBLE PAGE DVD La lecture ne démarre pas. • Pas de disque chargé. • Disque sale/le nettoyer. • CD ROM, ne peut être lu etc... 27 25 – Pas d’image • Le sélecteur TV/AV n'est pas réglé correctement. 26 Pas de son • Voir si le sélecteur d’entrée de l’ampli est bien réglé. • L’appareil est en mode de Lecture Spécial. • Sélectionne la position de sortie audio correcte sur l'ampli AV. – 28 44 L’image est distordue en AV RAP ou RET.RAP. • Défaut d’image passager.
Problemes de reception Il est possible de remédier à la plupart des interférences à la télévision en réglant la hauteur et en changeant la position de l'antenne VHF/UHF. Pour obtenir les meilleurs résultats, il est recommandé d'utiliser une antenne extérieure. La plupart des interférences sont expliquées ci-dessous. Si un de ces symptômes apparaît quand le télécouleur est raccordé au système de câblodistribution, le problème peut être causé par votre compagnie de câblodistribution locale.
Liste des codes langues Lors du réglage initial de l’ Audio, du SS.
Fiche technique DONNEES GENERALES Sources d'alimentation: Consommation de courant: AC 120V 60Hz En marche: 110 Watts En veill: 5 Watts 56,1lbs (25,5 kg) Largeur : 22-5/8 po (574 mm) Hauteur : 20-3/8 po (515 mm) Pro fondeur : 19-1/8 po (483 mm) Poids: Dimensions: TELECOULEUR Tube image: Syntonisateur: Canaux captés: Type 20 (508 mm diagonale) A synthétiseur de fréquences à boucle d'asservissement à quartz (PLL) VHF 2-13 UHF 14-69 CATV 14-36 (A)-(W) 37-59 (AA)-(WW) 60-85 (AAA)-(ZZZ) 86-94 (86)-(94) 95-99
Appendice (Programmation avec la télécommande) PROGRAMMATION AVEC LA TÉLÉCOMMANDE Réglage du récepteur CATV Vous pouvez programmer votre télécommande pour qu'elle puisse commander votre récepteur câble ou satellite en utilisant les instructions et les codes indiqués ci-dessous. Si l'équipement ne répond à aucun de ces codes ou à la fonction de recherche, utilisez la télécommande fournie par le fabricant.
JVC COMPANY OF AMERICA Division of U.S. JVC CORP. 1700 Valley Road Wayne, New Jersey 07470 JVC CANADA, INC.