240-020-505 DVD RECORDER DVD RECORDER INSTRUCTIONS 240-020-505 BUSY OPEN/CLOSE OPERATE OPTION DV Y/C LINE DVD RECORDER AUDIO CH1 TITLE SET UP CHAPTER DOLBY DIGITAL LPCM MPEG CH2 PHONES REV STOP PLAY FWD PAUSE REC TOP MENU SET MENU Thank you for purchasing this product. Before operating this unit, please read the instructions carefully to ensure the best possible performance. For Customer Use : Enter below the Serial No. which is located on the bottom of the unit.
IMPORTANT SAFEGUARDS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. I Read all of these instructions. Save these instructions for later use. All warnings on the product and in the operating instructions should be adhered to. Unplug this appliance system from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. Do not use attachments not recommended by the appliance manufacturer as they may cause hazards.
Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash wish arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Stryker Endoscopy Stryker Endoscopy 5900 Optical Court San Jose , CA 95138 Tel : 1. 800. 624. 4422 5900 Optical Court San Jose , CA 95138 Tel : 1. 800. 624. 4422 Supplement Supplément This apparatus is designed for rack mounting or is used close to other apparatus. Ce matériel est conçu pour le montage en baie et peut être utilisé à proximité d’autres appareils.
SAFETY PRECAUTIONS Classifications • Class • Type • Moisture Protection • AP/APG Category • Operation Mode :I : No applied parts : Ordinary : No : Continuous Warning Notice FOR YOUR SAFETY 1. Insert this plug only into effectively earthed threepin power outlet. 2. If any doubt exists regarding the earthing, consult a qualified electrician.
Guidance and Manufacturer’s declaration-electromagnetic immunity Supplement for medical Use Medical electrical equipment needs special precautions regarding EMC and needs to be installed and put into service according to the EMC information provided below. The Model 240-020-505 is intended for use in the electromagnetic environment specified below. The customer or the user of the Model 240-020-505 should assure that it is used in such an environment.
Guidance and Manufacturer’s declaration-electromagnetic immunity The Model 240-020-505 is intended for use in the electromagnetic environment specified below. The customer or the user of the Model 240-020-505 should assure that it is used in such an environment.
Thank you for purchasing this DVD Recorder. Main Features ● Recording of DVD-R/DVD-RW (video mode only) and DVD+R/ DVD+RW. ● Composite video, YC separate, DVI and DV signals are supported as video inputs; furthermore, analog or DV signals are supported as audio inputs. ● A keyboard can be used as an alternative to front panel buttons. ● The title and chapter menus can be created either automatically or manually. ● NTSC / PAL selectable ● Dual mode foot switch terminal available.
Introduction Overview of Functions Video and audio signals from this DVD recorder’s input terminals can be recorded to DVD-R / DVD-RW (video mode only) or DVD+R / DVD+RW. (☞ Page 26) The types of signals that can be used are as follows. Video: Composite video, YC separate, DV signals (including audio) or DVI signals Audio: Analog audio or DV signals (including video) A wide range of recording methods are supported. The appropriate method is to be selected in accordance with the intended mode of use.
Introduction Precautions for Disc Usage Details Regarding Discs Care of Discs to Ensure High-Quality Playback Discs for Recording & Playback Fingerprints, dust, or any other similar contamination of the surface of a disc can lead to distortion in the playback of recorded video and audio. For this reason, it is good practice to wipe each disc with a soft cloth before use. Looking After Discs ● Using a soft cloth, wipe the disc gently from the inside to the outside.
Component Names & Functions Introduction Details Regarding Discs (continued) DVD Data Configuration Region Codes Generally speaking, the content recorded on a DVD is separated into large units referred to as “titles”. A unique number called a “title number” is assigned to each of these titles, and as a result, any title can be immediately accessed using its title number. In addition, each title can be divided into smaller units referred to as “chapters”.
Component Names & Functions Front Panel (continued) & SET UP button BUSY OPEN/CLOSE OPERATE OPTION DV AUDIO CH1 TITLE Y/C LINE SET UP CHAPTER DOLBY DIGITAL LPCM MPEG CH2 PHONES REV STOP PLAY FWD PAUSE REC TOP MENU SET MENU 9 0 ! @ # $ % ^ 9 REV button and indicator ● Press this button during playback or fast-forward mode to start fast-reverse play. If pressed during fast-reverse play, this button toggles the speed of fast-reverse play between low speed and high speed.
Component Names & Functions Rear Panel 0 DV IN/OUT terminal % MAIN 21 POWER 3 45 6 7 VIDEO LINE AUDIO CH1 INPUT LEVEL IN OUT +4dB -8dB IN Y/C OUT IN ^ Y/C DVI CH2 OUT & REMOTE FOOT SW 2 1 DV IN/OUT USB FOR SERVICE AC IN #$ @ 1 VIDEO LINE IN terminal (BNC) This terminal allows composite video signals to be input to the DVD recorder. In order to select these signals for input, set INPUT SELECT from the INPUT SELECT MENU screen to LINE.
LCD Display and On-Screen Content LCD Display The following information and data is presented on the DVD recorder’s LCD display.
LCD Display and On-Screen Content On-Screen Content In addition to loop through and playback screens, the monitor connected to the DVD recorder’s VIDEO LINE OUT or Y/C OUT terminal can display the following. ● Status messages ● Event messages ● Alarm messages ● The Setup Menu (☞ Page 59) ● Recording-operation control screens : REC CONTROL panel (☞ Page 40) The Setup Menu and a part of the Status messages are displayed on the monitor of the DVI OUT terminal. No.
LCD Display and On-Screen Content Event Messages ( Only the VIDEO LINE OUT or Y/C OUT terminal) Alarm Messages ( Only the VIDEO LINE OUT or Y/C OUT terminal) Event messages are displayed on the DVD recorder’s LCD display and on the monitor when incorrect operations are attempted. These messages will remain on-screen for approximately 3 seconds. Alarm messages are displayed on the DVD recorder’s LCD display and on the monitor when the recorder cannot obey a command.
Preparation Signal Connections Power Connections Video signals Connect the Power cord (included) to the DVD recorder. 1. Connect the Power cord (included) to the DVD Monitor Camera control unit MAIN POWER Camera recorder’s AC IN terminal. 2. Connect the power cord (included) into an MAIN POWER switch IN electrical outlet. DVI 3. Set the MAIN POWER switch to ON.
Preparation Inserting & Removing Discs Using a Keyboard Menu settings, the title and chapter settings, and other DVD recorder settings are carried out from setting screens displayed on the TV or monitor. In addition, recording operations can also be carried out from similar screens. Although the DVD recorder’s buttons are used in setting and operation screens, a keyboard can be used as an alternative.
Preparation Setting & Displaying the Date & Time Setting & Displaying the Date & Time (continued) Use the following procedure to set the internal clock’s date and time. Even when the DVD recorder’s power is turned off, the clock’s date and time settings are stored using the internal battery. Note that these settings are used to write the current date and time to a disc being recorded. The DISPLAY screen can be used to indicate whether or not the date and time are to be displayed on-screen.
Settings & Controls for Recording DVD Recording Preparing a Disc for Recording DVD recording is carried out using the following procedure. Pre-Recording Settings Preparation of the DVD-R / DVDRW (video mode only) or DVD+R / DVD+RW. ● Insert a new DVD-R / DVD-RW (video mode) or DVD+R / DVD+RW or alternatively, a similar disc that has been recorded on using the DVD recorder.
Settings & Controls for Recording Erasing All Data From a DVD-RW / DVD+RW Disc DISC menu screen DISC MENU Pre-Recording Settings 1. Insert the DVD-RW from which data is to be erased. Recorder switch settings 2. Press the SET UP button to display the Setup Menu. Use the AUDIO INPUT LEVEL switch on the DVD recorder’s rear panel to select the reference input level for analog audio (i.e., +4 dB or –8 dB). MENU FINALIZE CANCEL DISC FINALIZATION AUTO FINALIZE AUTO CANCEL DISC FINALIZ.
Settings & Controls for Recording Specifying the Disc Status Created when the Disc was Finalized It is possible to specify the action when a finalized disc is inserted into this machine or a DVD player, or the operation when playback of a title is finished. Also, it is possible to select whether to create a title menu (TOP MENU) or chapter menu (MENU) when finalizing or closing a title. It is necessary to carry out the setting before recording to a blank disc.
Settings & Controls for Recording Adjusting of Audio Recording Levels Checking the Video Input This DVD recorder’s audio recording levels can be adjusted using two different methods, and AUDIO REC VOLUME MODE from the RECORDER MENU (2/2) screen indicates the method to be used. In addition, it is also possible to return the audio recording levels to their default settings (i.e., unity gain).
Settings & Controls for Recording Selecting Styles for Title & Chapter Menu Title & Chapter Menus This DVD recorder can automatically create title and chapter menus in response to recording operations and can save these to the disc being recorded. When the disc is subsequently played, these title and chapter menus can be used to access specific sections of stored video and audio. ● When recording is stopped using the STOP button or a similar action (i.e.
Settings & Controls for Recording Recording Recording Sequence Changing Styles for Title & Chapter Menus The DVD MENU screen can be used to change the styles used for displaying title and chapter menus. One of eight different types of style can be selected for each of the title and chapter menus. This DVD recorder can also store a total of six different display patterns for title and chapter menus. At the time of purchase, this DVD recorder will contain five different template files.
Recording Recording with the Front Panel Recording with the Front Panel (continued) This DVD recorder recording operations can be carried out in two different ways — namely, using the buttons provided on the front panel and using the on-screen REC CONTROL panel. In the latter case, furthermore, recording operations can be performed using a keyboard. The following section, however, will provide a description of recording using the front panel buttons.
Recording Using a Keyboard to Control Recording Recording operations of this DVD recorder can be carried out using the REC CONTROL panel displayed on the monitor. In addition, a keyboard can also be used when working with this panel. REC CONTROL panel is only displayed on the monitor of VIDEO LINE OUT and Y/C OUT terminals. It is not displayed on the monitor of DVI OUT terminal.
Recording DAILY REC (Daily Recording) Finalizing (for Playback on Other DVD Players) DAILY REC allows recording to start/end automatically at a designated time on a daily basis. Specify whether to use the DAILY REC feature using the DAILY REC item on the RECORDER MENU (1/2) screen. Configuration RECORDER MENU (1/2) Screen RECORDER MENU (1/2) CHAPTER CREATION MANUAL Every05Min ON SP TIMELAPSE REC ON AUDIO ENCODE NO AUDIO DAILY REC ON ● The DAILY REC configuration screen will be displayed. 3.
Title & Chapter Menu Settings Changing Chapter Menus (THUMBNAIL EDIT Screen) Changing & Naming Thumbnails for Chapter Menus This DVD recorder can automatically create title and chapter menus as recording operations are started and stopped. Title and chapter menus are created using the following. ● Chapter thumbnails : The frames at which chapter marks have been inserted are used as thumbnails. ● Title thumbnails : The frames at the start of individual recordings are used as thumbnails.
Title & Chapter Menu Settings Changing & Naming Thumbnails for Chapter Menus (continued) Entering Names and Comments for Chapter Menus THUMBNAIL EDIT TITLE CLOSE 1-6 AAA 1. BBB CCC 1 2 3 DDD EEE FFF 4 5 CHAPTER MENU TEXT LOAD Use the following procedure to apply names to the thumbnails used in chapter menus, and also to add comments to be displayed on a chapter menu screen. Names and comments are entered using a keyboard.
Title & Chapter Menu Settings Ending the Editing of Chapter Menus Checking the Chapter Menu Screen Use the following procedure to see how the chapter menu looks when the selected display style is used. THUMBNAIL EDIT screen press the SET button. THUMBNAIL EDIT TITLE CLOSE AAA BBB CHAPTER MENU CCC 2 EEE 4 1. ● The CHAPTER MENU screen will appear. 1-6 april DDD 1.
Title & Chapter Menu Settings Changing & Checking Title Menu Styles & Names If EDIT MENU from the DVD MENU screen is set to ENABLE, the TITLE MENU EDIT screen will be displayed upon disc finalizing. Using this screen, it will be possible to change the title menu’s display style, to enter title names, and to confirm that the title and chapter menus are as required. ● Thumbnail of the title menu will be the top thumbnail of the chapter menu.
Title & Chapter Menu Settings Changing & Checking Title Menu Styles & Names (continued) Changing Names for the Title Menu TITLE MENU screen TITLE MENU FINALIZE 1. PRESET STYLE TITLE TEXT INPUT TITLE MENU PREVIEW EXIT Finalizing Discs Each title will be automatically assigned with a recording date/time and ENCODE QUALITY. Use the following procedure to enter manually names for titles in the title menu. Names and comments are entered using a keyboard.
Playback Playing Back a Disc It is possible to playback a disc recorded on this DVD recorder. Playback operation may vary according to whether finalization has been performed. DISC IN ACTION setting made during recording MENU TITLE The title menu (TOP MENU) will appear Playing Back a Disc before Finalizing 2. Select the number of the title to be played. Use the t, 8, 7, and 6 buttons to select the title number for playback. Operation 3. Press the SET button to begin playback. BUSY 1.
Playback Fast & Slow Playback Index Writing and Index Search Indexes are used to locate the beginning of specific positions when in the Playback mode. (Index search) Viewing of index information (index No. and counter data) and index search can be performed on the INDEX MANAGER screen.
Playback Index Writing and Index Search (continued) 2. Selecting an index to search or erase. Upon starting up the INDEX MANAGER screen, the title and index of the point for which its screen is called up will be selected. When selecting a title No. q Press the cursor buttons ( / / / ) on the main unit to highlight the title selection buttons ( / / / ) on the INDEX MANAGER screen. w Press the SET button on the main unit to select the title No.. The title No. changes each time the SET button is pressed.
Setup Menu Setup Menu Configuration Setup Menus The Setup Menu screen is displayed on both the monitor and LCD display. As shown below, this screen is used to access this DVD recorder’s setup menus. DISC MENU screen (☞ Page 62) INPUT SELECT MENU screen (☞ Page 63) DISC MENU MENU The following table identifies and describes the parameters that may be set using the Setup Menus.
Setup Menu DISC MENU Screen INPUT SELECT MENU Screen The following table identifies and describes the parameters that may be set using the DISC MENU screen. Top half : Appearance on monitor screen Bottom half : Appearance on LCD display [ ] : Default setting The following table identifies and describes the parameters that may be set using the INPUT SELECT MENU screen.
Setup Menu SYSTEM MENU Screen (continued) SYSTEM MENU (2/2) screen Parameter KEYBOARD STYLE KboARd Possible settings Description [ENGLISH] FRENCH ITALIAN GERMAN SPANISH JAPANESE This parameter is set when using a USB keyboard, and its purpose is to indicate the keyboard’s layout (or language) as one of the following. ENGLISH FRENCH ITALIAN GERMAN SPANISH JAPANESE Note The system must be restarted after this parameter is changed.
Setup Menu DVD MENU Screen The following table identifies and describes the parameters that may be set using the DVD MENU screen. Top half : Appearance on monitor screen Bottom half : Appearance on LCD display [ ] : Default setting Parameter EDIT MENU EdIT STYLE STYLE Possible settings Description ENABLE [DISABLE] This parameter is used to indicate whether or not a screen for editing the title and chapter menus is to be displayed when title closing or finalizing is performed.
Setup Menu RECORDER MENU Screen The following table identifies and describes the parameters that may be set using the RECORDER screen. Top half : Appearance on monitor screen Bottom half : Appearance on LCD display [ ] : Default setting Parameter Possible settings Description AUDIO ENCODE NO AUDIO LPCM [DOLBY DIGITAL] MPEG This parameter is used to set the encoding format for audio data. NO AUDIO : Do not record audio sound. The recording time will be longer as sound recording is not performed.
Setup Menu REMOTE MENU Screen The following table identifies and describes the parameters that may be set using the REMOTE MENU screen. Top half : Appearance on monitor screen Bottom half : Appearance on LCD display [ ] : Default setting Parameter Possible settings Description REMOTE SELECT [OFF] This parameter is used to select a method for controlling external devices connected via the DV IN/OUT terminal). OFF : Control is not to be carried out via the DV IN/OUT terminal.
Setup Menu DISPLAY MENU Screen CLOCK ADJUST MENU Screen The following table identifies and describes the parameters that may be set using the DISPLAY screen. Top half : Appearance on monitor screen Bottom half : Appearance on LCD display [ ] : Default setting This setting is only valid for the monitor of VIDEO LINE OUT or Y/C OUT terminal.
Others Changing the Signal System (NTSC / PAL) This DVD recorder supports both the NTSC and PAL signal systems. The signal system can be altered at the TV TYPE item on the SYSTEM(2/2) menu screen, or via the following procedure. The signal system can be changed even when the monitor is not connected. Operation Procedure 1. Set this unit to the Stop mode. 2. Press and hold the SETUP and STOP buttons simultaneously for approximately 3 seconds. ● This changes the signal system.
Others Troubleshooting Before requesting service for a problem, use this chart and see if you can solve the trouble yourself. Small problems are often easily solved, and this can save you the trouble of sending your unit off for repair. General Service and Claims Images are blurred or distorted when you start High-Speed Search. A Images are blurred or distorted at the point where the playback speed changes and this is not a malfunction of the unit. No power is supplied to the unit.
Others Warranty Statement This Stryker Endoscopy product is warranted to the original purchaser for a period of one year from the date of purchase to be free from defects in material and workmanship. This warranty extends to all purchases and is limited to the repair or replacement of the product without charge when returned to: Stryker Endoscopy 5900 Optical Court San Jose, California 95138 Stryker Endoscopy cannot accept responsibility for returns or replacements which have not been authorized.