WLT103M-ESREV01-03 WLT102M-ES up up Wall TV Bracket Support de télévision mural Halterung für Wandfernseher Barra TV Bracket TV TAP 壁面テレビスタンド 墙面电视支架
If you do not understand these instructions or install the product,Refer to Installation of Products for problems arising from useUse video or send us an email: Si vous ne comprenez pas ces instructions ou l 'installation du produitLes problèmes liés à l 'utilisation, veuillez consulter l' installation du produitUtilisez la vidéo ou envoyez - nous un courriel: Wenn Sie diese Anweisungen nicht verstehenoder das Produkt installieren,Siehe Installation von Produkten für Probleme,die sich aus der Verwendung e
18 3
17
STEP5 Horizontal Angle Adjustment Regolazione orizzontale dell'angolo Horizontal angle Verstellung des Horizontals Ajustar horizontalmente 水平角度の調節 水平角度调节 ±3° a screwdriver to adjust the screw,control the tilt angle of the TV,the angle can be controlled at ±3 degrees. Scope of application Champ d 'application Umfang der Anwendung Ambito di applicazione Ámbito de aplicación 適用範囲 适用范围 75KG(165Lbs)MAX/Each Max:600x400mm/ 23.6x15.
3 1 x1 2 x1 T6 3 x1 T7 4 x1 T8 x1 T9 5 Use this template to determine where you will drill your holes. Wall studs generally are either 16 inch or 24 inch apart.
STEP3 Display installieren 安装显示器 Installa la visualizz azione 1 STEP1 Installation of TV Fixer Installazione di TV Fixer Installation d 'un support de télévision Instalar televisor fijo Installation von TV Fixer テレビの固定台を取り付ける 安装电视机固定架 VESA 400mm x400mm(15.3/4in x 15.3/4in) Wood Stud 2 VESA 600mm x400mm(23.5/8in x 15.
NOTE!!! Knob facing out Manual Only! 2.2 STOP STOP Min.8" (203mm) 2 3/5 in(65mm) T1-T6 10mm(3/8”) Masonry Paper moulding tape paper T7-T8 Use this template to determine where you will drill your holes. Wall studs generally are either 16 inch or 24 inch apart.
STEP2 2.1 Min.8" (203mm) STOP STOP Television bracket installation Installation von Fernsehhaltern Instalación de televisores Installation de support de télévision Installazione di supporti televisivi テレビの取り付け 电视机支架安装 10mm(3/8”) Masonry 2 3/5 in(65mm) Paper moulding tape paper <16mm (5/8") 16"or24" (406or609mm) Min.Wood Stud Size: nominal 4"(102mm) actual 3 1/2"(89mm) Min.Wood Stud Size: nominal 2"(51mm) actual 1 1/2"(38mm) Use this template to determine where you will drill your holes.
1.1 1.2 Paper moulding tape paper Max.16" (406mm) Centre line Paper moulding tape paper Max.24" (609mm) Centre line Use this template to determine where you will drill your holes. Wall studs generally are either 16 inch or 24 inch apart. Use this template to determine where you will drill your holes. Wall studs generally are either 16 inch or 24 inch apart.