Specification

ADA
COMPLIANT
.
S
U
B
M
I
T
T
A
L
D
A
T
A
US-ADA-1818-A - 18 GA.
PH: 847-678-5150 . FAX: [phone] . E-MAIL: [e-mail] . www.justmfg.com
9233 KING STREET . FRANKLIN PARK . ILLINOIS . 60131-2111JUST MANUFACTURING COMPANY
JUST MFG. COMPANY CONTINUES TO MAKE QUALITY AND FUNCTIONALITY A MARK OF THE
JUST PRODUCT LINE. TO DO SO REQUIRES THAT WE RESERVE THE RIGHT TO CHANGE
PRODUCT INFORMATION WITHOUT NOTICE. DIMENSIONS MAY VARY AND ARE SUBJET TO
CHANGE WITHOUT NOTICE. NO RESPONSIBILITY IS ASSUMED FOR USE OF SUPERCEDED
OR VOIDED DATA. FOR THE MOST CURRENT AND ACCURATE INFORMATION REGARDING
THE COMPLETE LINE OF JUST SINKS, FAUCETS AND DRAINS, CLICK ON THE SPEC LINE
DRAWINGS LINK ON OUR WEB SITE AT www.justmfg.com
2007-2013-JUST MFG
APPROVED FOR MANUFACTURING
MODEL NO.:________________________________________QTY: _________
JOB NAME: ______________________________________________________
TAG/ITEM: ______________________________________________________
CUSTOMER:_____________________________________________________
SIGNATURE:_____________________________________________________
USADA1818A
US-ADA-1818-A
UNDERMOUNT GROUP
ADA COMPLIANT
SINGLE COMPARTMENT
DRAIN LOCATION:

CENTER (SHOWN)

LEFT REAR

RIGHT REAR

CENTER REAR
LOCATIONS MUST BE A MINIMUM OF 4
1
/
2
" FROM THE BOWL WALL.
DEPTH - MUST BE SPECIFIED:

4 1/2"
DEEP

5"
DEEP

5-1/2"
DEEP
SPECIFICATION
Seamless die-drawn construction of 18 gauge, type 304,
18-8 stainless steel. Interior and top surfaces polished to a
non-porous Hand-Blended Just Finish with highlighted bowl
rim. Smooth, fully coated underside insulates for sound and
reduces condensation. Certified to ASME A112.19.3/CSA
B45.4, Canadian Standards Association (CSA), Uniform
Plumbing Code (UPC), International Plumbing Code (IPC).
Drain punched for J-35 drain.
depth that can be used while maintaining deck height and knee clearances.
*
1
OPENING FOR
J-35 CUP STRAINER
R1 3/4
1
1
18
18
16
16
4 1/2
TO
5 1/2
R1 3/4
5.86
Gallon
Capacity*
*Capacity is based on 5-1/2” Depths