ActiveSync, Excel, Hotmail, Internet Explorer, Microsoft, MSN, Outlook, PowerPoint, Visual Studio, Windows, Windows Media, Windows Mobile, Windows Mobile Device Center, Windows Vista, and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. ® The Bluetooth word mark is owned by the Bluetooth SIG, Inc. and any use of such marks by Juniper Systems, Inc. is under license.
Contents 1 Getting Started The Anatomy of the Mesa Performing Initial Tasks 6 8 2 Hardware Components Navigating Around Your Mesa Home Screen and Windows Start Menu Display and Touchscreen Keypad Features Power Management LED Activity Indicators SD Cards Connector Module Audio Features 16 17 18 20 24 26 26 27 28 3 Programs and Settings The Home Screen Suspend, Reset, Power Off, and Restore the Mesa Communicating with a Desktop Computer Getting Started Screen and Online Help Information for Software D
6 Geo Models GPS Camera 7 3G Data Modem Set up a Data Account with a Wireless Provider Install the SIM Card Set up the Cell Modem Wireless Safety Maintenance of Your Modem 8 Storage, Maintenance and Recycling Storing the Mesa and Battery Pack(s) Protecting the Touchscreen Cleaning the Mesa Recycling the Mesa and Batteries 9 Warranty and Repair Information Limited Product Warranty Extended Warranties Repairing the Mesa A Specifications Mesa Rugged Notepad Specifications 54 59 64 64 66 67 68 70 71 71 7
1 Getting Started 6 The Anatomy of the Mesa 8 Performing Initial Tasks
Mesa Rugged Notepad The Mesa Rugged Notepad™ from Juniper Systems is designed for collecting data in rugged environments. Features include: Windows Mobile® 6.5. Large daylight readable VGA display Large on-screen buttons for touch-friendly operation Rugged environmentally sealed design Bluetooth® wireless technology Wi-Fi 802.11b/g, U.S. and international Dual battery option for long operating life 3.
Mesa Back View: Battery Compartments, Card Slots 1 6 7 8 2 3 4 5 9 1 Camera lens (Geo model) 2 Battery door with quarter turn latches 3 Battery compartment #2 (battery pack installed) 4 Mobile Dock connections 5 Connector protector 6 SIM card slot 7 SD card slot 8 Battery compartment #1 9 External accessory mount (4 on back) Ch 1 Getting Started
Mesa Side View, Connector Module 1 2 3 4 5 6 7 8 1 User replaceable connector module 2 12V DC power input jack 3 Audio jack 4 Cable restraint mount 5 RS-232C 9-pin D-sub connector 6 USB host, full size A 7 USB client, mini B 8 Hand strap tether (one on each corner) Performing Initial Tasks When you receive your Mesa, perform the tasks outlined in this section before first use.
Apply a Screen Protector Before using the Mesa, apply a screen protector to the surface of the touchscreen to protect it and make it scratch-proof. Screen protectors are included with the Mesa. Refer to the installation instructions in the package for specific details. 1. Clean the screen with the dust-free cloth. Compressed air can be used to blow off any remaining dust. Note: Do not use paper towels or a cleaning solution on the touchscreen. 2. Attach the screen protector as instructed. 3.
Charge the Battery Pack(s) Install and charge the Li-Ion battery pack(s). The Mesa is designed to use 1 or 2 battery packs. Using two battery packs extends the operating time of the unit. Geo 3G models should always use two battery packs. Complete the following steps: 1. The battery compartments are located on the back of the Mesa.
3. Replace the door(s) and tighten the latches. ! CAUTION: The Mesa is not totally sealed against water and dust when battery doors are not installed and properly latched. 4. Plug the AC wall power charger that came with the Mesa into a wall socket. Plug the other end into the DC power jack on the Mesa.
Perform Set Up 1. The Mesa powers on and begins the startup process. A progress indicator is shown on the screen. 2. Follow the on-screen instructions. 3. The Clock and Alarms control panel is shown. Adjust the time zone, date and time if necessary and tap OK. 4. Tap on the screen again to complete the set up process. 5. The Home screen appears. 10. Charge the battery pack(s) at room temperature (68° F or 20° C) for 2 to 3 hours if you are using one pack and 4 to 6 hours if you are using 2 packs.
Adjust the Hand Strap A hand strap is included with the Mesa. It is attached to the left side of the Mesa along with a stylus, leaving your right hand free to operate the Mesa. Put your hand between the strap and the Mesa from the front and adjust the hand strap to fit securely against the back of your hand. You can move the hand strap to different locations to meet your needs. There are four hand strap tethers (one on each corner).
Review the Manual Once you have attached a screen protector, charged the battery pack(s), and adjusted the hand strap the Mesa is ready to use. Review the rest of this manual to learn about the functionality of the Mesa.
2 Hardware Components 16 Navigating Around Your Mesa 17 Home Screen and Windows Start Menu 18 Display and Touchscreen 20 Keypad Features 24 Power Management 26 LED Activity Indicators 26 SD Cards 27 Connector Module 28 Audio Features
Mesa Hardware Components This chapter discusses the Mesa Rugged Notepad hardware features and usage. Navigating Around Your Mesa Using Gestures and Making Selections The Windows® Mobile operating system enhances the Mesa’s ability to recognize touch gestures, making it easy to use a finger to navigate. The Mesa buttons can also be used. Navigation options vary depending on the screen you are on. Here is a partial list of options: Vertical and Horizontal Movement 1.
Home Screen and Windows Start Menu There are two screens you need to be aware of as you read this manual and use the Mesa: the Home screen and Windows Start menu. The Home screen is your main control center for the Mesa. The content varies based on which model you have and can be customized. It is automatically shown when the Mesa is turned on. You can get to it from any other screen by pressing and releasing the Home screen button.
Display and Touchscreen The Mesa has a bright color display and touchscreen with a diagonal viewing area of 5.7 inches (145 mm). It is easy to view outdoors and sealed against water and dust. Adjusting Display Settings To adjust the default display settings including the text size, alignment and orientation, go to the Screen control panel, Start > Settings> System > Screen. There are also shortcuts to some of the settings described in the text that follows.
Disabling and Enabling the Touchscreen You can disable the touchscreen. This is useful when you are running an application and you want to see the screen, but you want to avoid accidental touchscreen activation. It can also be disabled for cleaning purposes. Options: Press and hold the screen orientation button Press and hold the power button Button menu. Select Disable TS. . to bring up the Power The touchscreen disable icon is shown in the title bar until the touchscreen is enabled again.
display is still partially visible. Adjust the dim time interval and setting as needed. To use the Mesa, tap on the display to bring the display backlight back up to the brightness setting. Keypad Features The Mesa has fifteen buttons with symbols indicating their functions as shown below.
Buttons and their functions: Button Press and Release Press and Hold Camera (Geo models) or Task Manager Pictures and Videos (Std) Notes Record Audio Note (press and hold to record, press to stop) Screen Brightness Down Screen Brightness Up Home Screen Start/Windows Screen Left Soft Key No Function Rotate Screen Action Touchscreen Disable/ Enable Done/OK Left Up Down Right Enter Done/OK Right Soft Key No Funct
Follow these steps to reassign button functions: 1. From the Home screen, tap Getting Started . If Getting Started is not on your Home screen, go to Start > Settings > Personal > Buttons. Select Configure Buttons from the list. A list of default button assignments is displayed. 2. Scroll to the bottom of the screen. Select the shortcut to Settings > Personal > Buttons. 3. A list of reassignable buttons is shown in 1. Select a button. Select the button you want to reassign.
5. Select the down arrow button shown in 2. Assign a program. 6. A list of programs is shown. Select the program you want to reassign to the selected button. Tap OK.
Power Management The Mesa uses 1 or 2 Li-Ion rechargeable battery packs. Battery Life Battery life on a full charge is generally up to eight hours per pack (this can vary significantly depending on the application, backlight usage, and radio usage). Battery packs last approximately 300-500 charging cycles. This is impacted by the use conditions, environment, etc. Charging Battery Packs To charge battery packs, refer to the instructions in Chapter 1, Getting Started.
Go to the Advanced set up screen to select how long the Mesa should stay on when it is not in use. As mentioned under “Adjusting the Backlight,” dimming the display backlight saves battery power. Radios can also use a lot of power. You can conserve power by disabling them when not in use from the Home screen or Start > Settings > Connections. Viewing Battery Status You can view the status of the battery pack(s) from the Home screen if the battery gadget is enabled.
Charging Errors Charging errors are caused by the following: Battery pack(s) is too hot to charge Battery pack(s) is too cold to charge Cannot charge for unknown reason If you have a charging error, make sure the battery pack(s) is inserted correctly, the battery door(s) is closed properly, and you are within the charging temperature range.
4. An image on the battery compartment label shows the correct location and orientation for the card. Push the SD card into the slot to insert it. To remove an SD card, push it into the slot then release it to eject the card. 5. Replace the battery pack and attach the battery door. 6. Resume the Mesa if it was suspended in step 1. Connector Module The Mesa has the following jacks and connectors: Power input jack, 12 VDC for power input and battery charging Microphone/Speaker jack: 3.
Audio Features The Mesa has a speaker, microphone, and audio jack. To adjust audio settings, select the top title bar, then the speaker icon from the horizontal-scrolling list that appears. You can also go to Start > Settings > System > Audio. The Audio control panel appears. Speaker The speaker sound is loud and clear. Listen to audio notes, video sound, and music files. Microphone Use the microphone to record audio notes or add sound to a video when using the camera function (Geo units).
3 Programs and Settings 30 The Home Screen 35 Suspend, Reset, Power Off, Restore the Mesa 37 Communicating with a Desktop Computer 38 Getting Started Screen and Online Help 40 Information for Software Developers
Mesa Programs and Setting This chapter discusses the Mesa Rugged Notepad programs and settings. The Home Screen The Home screen is your main control center for the Mesa. View vital system information and quickly access functions and applications that are frequently used. The default home screen for a basic unit is shown below. If you have a Geo model or a cellular modem, different functions are shown. You can customize the Home screen.
larger, touchable icons in a horizontal-scrolling bar. Select a function to view the settings and adjust them as desired. Title Bar Pop Up Status Icon Bar Dashboard The dashboard consists of a background image and up to six dashboard gadgets that serve as functional indicators and control buttons. In most situations, tap on a gadget to turn a function on/off. Tap and hold to go to a control panel or launch an application. You can switch between two color schemes and select which gadgets are shown.
A list of available dashboard gadgets is shown. Tap on your selection. The dashboard icon changes when you make a selection. If “None” is selected, the space becomes blank. Dashboard Gadget Functions Wi-Fi: Shows the state of the Wi-Fi radio and provides the name of the wireless network that it is attached to. Bluetooth: Shows the state of the Bluetooth radio. Battery Status: Shows the status of the current battery pack(s). Email: Shows the current number of unread email messages.
number of unread text messages. Gadget Color Indicators Wi-Fi, Bluetooth, GPS and 3G data modem gadgets indicate status using these colors: Gray: Off or inactive Yellow: Partial state (getting satellite fix, etc. Green: Active and available Blue: Notification state (on or connected) Red: Error state, powering up or down, no GPS fix, or unavailable (3G data modem is red when power is changing from on/off. Wi-Fi is red when an access point is available, but not connected.
application you were running. You can customize which application shortcuts are shown. Tap and hold on the shortcut you want to change to bring up a list of available applications. Tap on your selection. The icon on the home screen changes to the icon associated with the new application. Tile Bar Touchable tiles (or soft keys) are shown in the tile bar at the bottom of each screen.
(button) on the Mesa’s bottom navigation keypad to select the tile in the second position and the right soft key to select the tile in the fourth position. Tile examples: Start Close Navigate back Menu Lock Edit Delete Suspend, Reset, Power Off, and Restore the Mesa Use the power button and the power menu to suspend, reset, power off or restore the Mesa. To access the power button menu, press and hold the power button.
Suspending and Resuming the Mesa We recommend suspending your Mesa if you plan to turn it off for less than two weeks. While it is suspended, you should attach it to a wall charger when not in use. Suspending the Mesa is different from powering it off. When the device is suspended it goes into a very low power mode. When it is resumed, the Mesa resumes where it was before it was suspended. To suspend your Mesa, press and release the power button.
Powering Off and Powering On the Mesa To preserve battery power, we recommend you power off the Mesa if it will not be used for two weeks or longer. ! CAUTION: Be aware that when the Mesa is powered off, it closes all programs and powers down all system components except for the real-time clock. Unlike suspend mode, the device resets when it is powered on again. Any unsaved data is lost. 1. Save all open files and close any running programs. 2. Press and hold the power button until the power menu appears.
Installing the Software Install free synchronization software from Microsoft on your desktop computer. 1. Go to the Microsoft website on your PC. 2. Locate the Windows Mobile downloads section of the website. If your computer is running Windows® 2000 or Windows® XP, select ActiveSync® software to download. If it is running Windows Vista™ or Windows® 7, select Windows Mobile® Device Center. 3. Follow the download instructions on the website. Establishing a Partnership 1.
Online Help Online help is available from Getting Started.
You must be connected to the internet to access online help. Select from the help topics. Information for Software Developers For Mesa SDK information, go to our website: http://www. junipersys.com/index.php/Juniper-Systems/support/ Developers/Mesa-Rugged-Notepad.
4 Bluetooth Wireless Communication 42 Creating a Partnership 44 Microsoft Bluetooth Control Panel 46 Serial Device (COM) Control Panel
Bluetooth® Wireless Communication The Mesa has built-in Bluetooth® wireless technology, allowing you to connect it to other wireless devices with Bluetooth technology. Minimum performance between similar objects in an unobstructed environment is approximately 100 feet (30 meters). The Mesa provides simple configuration options for the following types of Bluetooth devices: 1. Devices such as headphones, keyboards, and modems (to connect to the internet with an external cell phone). 2.
4. Tap and hold the Bluetooth icon to bring up the dialog box shown below.
either Set up a Bluetooth device or Set up a Bluetooth COM Port. You can also go to Start > Settings > Connections. Note: If the Bluetooth radio is turned on and then the Mesa is suspended, wireless Bluetooth turns off to save battery power. When the Mesa resumes (turns on), the radio turns on automatically. Microsoft Bluetooth Control Panel To create a partnership between the Mesa and another device such as headphones, keyboards, and modems, follow these steps: 1.
a. If the device has an assigned passcode, enter the number and press Next. b. If a passcode is required but has not been assigned, enter an alphanumeric passcode between 1 and 16 characters in length. Press Next. c. If a passcode is not required, leave the box blank and press Next. Note: If you are unsure whether the device requires a passcode and whether one has already been assigned to the device, see the user documentation that came with the device. 4.
Serial Device (COM) Control Panel To set up a Bluetooth COM port, follow these steps: 1. Select the GPS, Barcode scanner (COM) option. The following Bluetooth COM configuration screen is shown. Select Discover Devices. 2. A list of discovered devices is shown. Select the device you want to connect to from the list and tap Connect. A COM port is automatically assigned for the device.
change it to another COM port. 3. The Mesa automatically tries to discover the PIN. You might be required to enter a PIN. 4. You should now be connected to the COM device.
Mesa Rugged Notepad Owner’s Manual
5 Wi-Fi Wireless Communication 50 Connecting to a Wi-Fi Network
Wi-Fi Wireless Communication The Mesa has built-in Wi-Fi wireless communication to connect to the Internet or a work network Connecting to a Wi-Fi Network To use Wi-Fi, you need to be in range of an access point to make a connection. To actively look for a network connection complete the following steps: 1. From the Home screen, turn Wi-Fi on by tapping the Wi-Fi gadget . The Mesa automatically starts scanning the area for available Wi-Fi networks.
3. Tap on the network you want to connect to. If you want to add a new network, select Add New from the top of the list. 4. Configuration and authentication set up screens are shown. Depending on the network you are connecting to, you may need to make some selections from pull down lists and enter information like a passkey. Some information may not be required or will appear automatically. When you are finished with the set up screens, press Finish. 5.
Wi-Fi Dialog Box Note: Whenever Wi-Fi is turned on, the following dialog box might pop up indicating the Wi-Fi networks the Mesa has located. You can select a new network and set it up without going to the Wi-Fi control panel. Through the menu button, you can disable this dialog box from popping up in the future. Adjusting Wi-Fi Settings To add a new Wi-Fi network or edit settings, select the Menu soft key and make a selection from the pull-down list.
6 Geo Models 54 GPS 59 Camera
Mesa Geo Model The Mesa Geo model has GPS with 2 to 5 meter accuracy and a 3.2MP camera. Juniper Geotagging™ gives the Mesa the ability to embed and emboss photos with the date, time and GPS position. A 3G Data Modem is an optional feature. GPS To use GPS, tap on the satellite gadget to turn it on. The GPS starts looking for satellites to use for a fix.
11/12 SV The number of satellites currently in view followed by the number of satellites used for the current position. 3Diff The type of fix you have. Three satellites are required for a 2D fix while 4 are required for a 3D fix. 3Diff means SBAS (WAAS/EGNOS/MSAS) signal is being used for GPS solution. PDOP A measure of accuracy. The lower the number, the more accurate the fix is. Note: When you suspend the Mesa, the receiver is in a low power mode to retain its almanac.
GPS Intermediate Driver GPS Receiver Access for Multiple Programs The GPS Intermediate Driver (GPSID) is used to allow more than one program to use data from the GPS receiver. The GPS Control Panel Settings page controls how the GPSID is used. On Geo units, the internal GPS is on COM7 and communicates at 38400 baud. These settings are found on the Hardware page of the GPS Control Panel. If some other GPS receiver is to be used, this is where you connect that GPS receiver so that the GPSID can access it.
Compass Gadget Functions Compass gadget is turned off. Waypoint tool. Tap it to mark a waypoint. No GPS fix. Arrow keys show your current heading or bearing. This flag indicates that you are close to the waypoint. Information about how many feet away you are, the elevation, and degrees is also shown. Navigation Settings You can also enter a known waypoint. Tap and hold the compass gadget to see the following dialogue box: Enter the desired latitude and longitude.
Set: Take the coordinates in the “Change” boxes and set these as the new waypoint. Clear: Clear the waypoint (goes back to the blue flag). Mark: Take the current GPS coordinate and set this as the new waypoint. Units: Displays units in either feet/miles for U.S. or meters/ km for metric. Nav Mode: Bearing – The arrow icon and angle displayed are referenced off of North. Position the top of the device toward North and the arrow will point in the direction to travel to get to the waypoint.
Breadcrumb: This is an independent function from everything else in this gadget. Setting this logs points at specific time intervals into the GPSTrack.gpx file. There are three files created, 2 for waypoints and 1 for the breadcrumbing. Waypoint information is saved in both the GPSLoc.gpx and GPSLOC.csv. Both files contain the same information, but in different formats. The breadcrumb data is stored in the GPSTrack.gpx file. These files can be used in programs like Google Earth.
Take a picture by pressing the camera button . To view your photo library select the Thumbnails softkey. Select the Menu softkey to edit a particular picture, play a slide show, etc. Geotagging When pictures are geotagged, the date, time, latitude, and longitude are included with and/or on the image. To use this feature, follow these steps: 1. Turn on GPS by tapping the GPS gadget screen and wait for a fix.
2. Select Geotag from the menu. The following Geotag Options screen is shown: Select the options you want. Embed: select this option to build the GPS information into a jpg file. This allows you to put the image into programs like Google Earth, sort images by location, etc. The information does not appear on the image. Emboss: this option embosses the GPS information on the picture making it part of the image. Select the embossing location. Videos Select Video to from the Menu soft key.
Mesa Rugged Notepad Owner’s Manual
7 3G Data Modem 64 Set up an Account with a Wireless Provider 64 Install the SIM Card 66 Set up the Cell Modem 67 Wireless Safety 68 Maintenance of Your Modem
3G Data Modem The 3G data modem is an option for Mesa Geo models, adding Wide Area Network data modem capability to the Mesa. The modem is installed at the factory. The modem is a cellular data modem, type GSM/UMTS. It is five band modem compatible. The modem operates in different modes depending on the wireless provider and the signal strength. Data speeds will vary anywhere from 10 or 20 Kbps when using GPRS to over 1 Mbps when using HSDPA.
3. Remove the battery pack. ! CAUTION: The Mesa is not totally sealed against water and dust when battery doors are not installed and properly latched. 4. An image on the battery compartment label shows the correct location and orientation for the SIM card. Push the card into the slot until it catches. To the right of the slot is a latch to help hold the card in place. Slide it to the left over the right end of the card towards the lock icon. To remove the SIM card, slide the latch to the right.
Set up the Cell Modem Tap on the 3G modem gadget . After about 30 seconds it turns green, indicating that the modem is available. Once it is available, configure it to make a connection. Tap and hold the modem gadget to open the Connections control panel.
Select “Automatically configure connection.” The name of your carrier appears. Tap Next. A progress is shown: on the next screen while your internet settings are configured. You can now access the internet. Open Internet Explorer to test your setup. Connection Problems If the connection fails to automatically configure, there might not be a signal where you are located. You can try repeating the set up process.
Maintenance of Your Modem Your cell modem is the product of advanced engineering, design, and craftsmanship and should be treated with care. The suggestions below will help you to enjoy this product for many years. Do not attempt to disassemble the cell modem. There are no user serviceable parts inside. Do not place the cell modem alongside computer discs, credit or travel cards, or other magnetic media. The modem may affect the information contained on discs or cards.
8 Storage, Maintenance and Recycling 70 Storing the Mesa and Battery Packs 71 Protecting the Touchscreen 71 Cleaning the Mesa 72 Recycling the Mesa and Batteries
Storage, Maintenance and Recycling Follow the instructions in this chapter to properly maintain and recycle the Mesa. Storing the Mesa and Battery Pack(s) When the Mesa is not being charged and is suspended, it draws a small amount of power. This power draw is used to maintain the memory (RAM) of the Mesa in the same state it was when it was suspended. We recommend charging the Mesa each night or weekend when it is in suspend mode.
Protecting the Touchscreen Protect the touchscreen from impact, pressure, or abrasive substances that could damage it. To further protect the touchscreen, apply one of the screen protectors that came with the Mesa. To apply a screen protector, follow the directions that come with it in the package. ! CAUTION: Be sure to replace the screen protector as often as the screen protector instructions recommend. Cleaning the Mesa Touchscreen 1.
! CAUTION: Do not direct a high pressure stream of water at the device to clean it. This action could break the seal, causing water to get inside the device and voiding the warranty. Safe Cleaners to Use The Mesa can be cleaned safely with the following cleaners: Windex® (S.C. Johnson & Son, Inc.
To find the nearest battery recycling center in the USA, visit the Rechargeable Battery Recycling Corporation’s website at www. rbrc.org/call2recycle/index.html or call 1-800-8-battery.
Mesa Rugged Notepad Owner’s Manual
9 Warranty and Repair Information 76 Limited Product Warranty 78 Extended Warranties 79 Repairing the Mesa
Limited Product Warranty Juniper Systems, Inc. (“JS”) warrants that the Mesa Rugged Notepad shall be free from defects in materials and workmanship, under normal intended use, for a period of 12 months from the date of shipment.
This warranty is exclusive and JS will not assume and hereby expressly disclaims any further warranties, whether express or implied, including, without limitation, any warranty as to merchantability, fitness for a particular purpose, noninfringement or any warranties arising from the course of performance, dealing, or usage of trade. JS specifically makes no warranties as to the suitability of its products for any particular application.
interruption of any product. Any responsibility and/or liability of JS shall, in connection with a warranted product, be limited in the maximum amount to the original purchase price. Warranty Repairs To obtain warranty repair or service on the Mesa, submit a repair order on our website at www.junipersys.com > Support > Repairs or contact an authorized repair center within the applicable warranty period.
Extended warranties apply only to the Mesa, not battery packs, media containing the Mesa programs, desktop computer programs, user documentation, and accessories. Parts that are excessively worn are not covered under all warranty plans. These may include, but are not limited to, the keyboard elastomer and switch matrix, hand straps, touchscreens, and connector modules. Warranty Information Warranty information for the Mesa Rugged Notepad is located on our website at: www.junipersys.com > Support > Warranty.
Credit Card/ Purchase Order number and billing address (for a repair or upgrade that is not covered by the standard warranty or an extended warranty policy) System Information for your Mesa When you contact a repair center you need some unique system ID information for your Mesa (serial number, model number, etc.). Tap Start > Settings > System > System Information to view the following menu. Select System ID.
A Specifications
Mesa Rugged Notepad Specifications FEATURE Operating System Processor Memory Primary Data Storage SD Card Slot Physical Features Display SPECIFICATION ® ® Microsoft Windows Mobile 6.5 English, French, German, Spanish Marvell XScale 806 Mhz Processor 256 MB RAM 4 GB Flash Storage SD/SDHC slot, full sized, user accessible Dimensions, standard: 5.3” x 7.5” x 2” (136 mm x 200 mm x 51 mm) Dimensions, Geo model: 5.3” x 8.
FEATURE Touchscreen SPECIFICATION Resistive technology for use with finger or stylus Touchscreen disable function Keyboard 15 control buttons (6 reassignable) Function keys Five-way directional button Backlight On-screen keyboard Batteries Rechargeable Li-Ion battery pack 7.4VDC 2550mAh, 18.
FEATURE Audio Activity Indicators Temperature Specifications Dust and Water Sealing Shock Resistance SPECIFICATION Speaker, forward facing, loud, clear Microphone, low noise 3.
FEATURE Software Included SPECIFICATION ActiveSync Adobe Reader LE Alarms Calculator Calendar Contacts E-Mail File Explorer Getting Started Help Internet Explorer Internet Sharing Juniper Home Screen, customizable with selectable dashboard gadgets and program shortcuts Marketplace Messaging Microsoft MyPhone ® Microsoft Office Excel Mobile ® Microsoft Office OneNote Mobile ® Microsoft Office PowerPoint Mobile ® Microsoft Office Word Mobile Notes Pictures & Videos
FEATURE Configurations Camera (Geo models) GPS (Geo models) SPECIFICATION Standard U.S. (4GB storage, U.S. Wi-Fi, Bluetooth) Standard International (4GB storage, International Wi-Fi, Bluetooth) Geo U.S. (4GB storage, U.S. Wi-Fi, Bluetooth, Camera, GPS) Geo International (4GB storage, International Wi-Fi, Bluetooth, Camera, GPS) Geo 3G U.S. (4GB storage, U.S.
FEATURE 3G Data Modem (Geo model option) Certifications and Standards Standard Accessories Optional Accessories SPECIFICATION Factory installed option Five band GSM/GPRS/EDGE, 850/900/1800/1900/2100 MHz data speeds Does not support voice calls Communicates on GSM-based networks FCC Class B CE Marking (applicable EMC, R&TTE, and LVD directives) Industry Canada EN60950 Safety Bluetooth SIG qualification USB client IP67 Designed to MIL-STD 810G Li-Ion battery(s) Hand strap Sty
Mesa Rugged Notepad Owner’s Manual
B Warnings and Regulatory Information 90 Product Warnings 91 Mesa Certifications and Standards
Product Warnings Follow the warnings listed below to use the Mesa and accessories safely. ! Battery Warnings WARNING! This device comes with a lithium ion rechargeable battery pack. To reduce the risk of fire or burns, do not disassemble, crush, puncture, short external contacts, or expose the battery pack to fire. Do not disassemble or open, crush, bend or deform, puncture or shred.
Improper battery use may result in a fire, explosion or other hazard. ! Wall Charger Warnings WARNING! To reduce the risk of personal injury, electrical shock, fire or damage to the equipment: Plug the wall charger into an electrical outlet that is easily accessible at all times. Do not place anything on the wall charger cord or any of the other cables. Arrange them so that no one may accidentally step on or trip over them. Do not pull on a cord or cable.
In compliance with the FCC rules, 47 CFR 15.105(b), the user must be notified that this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
! General Safety CAUTION: This device has been evaluated for use in close proximity to the body. Use only accessories approved by Juniper Systems. The use of third party accessories may not comply with FCC and international RF exposure requirements. To comply with FCC and other national RF exposure requirements do not co-locate this device with other transmitters. This device operates in compliance with the FCC radio frequency exposure limits for an uncontrolled environment.
ETSI EN 300 328 Radio ETSI EN 301 489-1, -7, -17 EMC for Radio Equipment ETSI EN 301 511 GSM ETSI EN 300 440 GPS The telecommunication functions of this device may be used in the following EU and EFTA countries: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovak Republic, Romania, Slovenia, Spain, Sweden, Switzerla
C Charging and Docking Accessories 96 Mesa Mobile Dock 103 Mesa Travel Charger
Mesa Mobile Dock The Mesa Mobile Dock is an optional accessory that provides a mounting station for the Mesa Rugged Notepad and additional communication options. Note: The Mesa Mobile Dock is not functional as a stand alone device. It requires the Mesa to be functional. For example, it is not a stand alone powered USB hub. Communication Options The mobile dock provides additional communication ports for use with sensors and other external devices, supplementing the ports on the Mesa.
a. AC wall power charger provided with the Mesa; b. Cigarette lighter power adapter (optional accessory). 2. USB client: This is a through connection to the Mesa USB client port. This port on the Mesa is not accessible when it is in the mobile dock. 3. RS-232 serial ports: The mobile dock provides two additional RS-232 ports. The RS-232 port on the Mesa is still accessible when it is in the mobile dock, providing three ports total.
holes, one on the left and one on the right. Place screws into these holes and screw them in half-way. 2. Slide the desktop base up so the screw slots on the back slide onto the screws and tighten them. 3. In the front of the desktop base and on the dock near the bottom there are two screw holes, one on the left and one on the right. Place screws into these holes, screw them in all the way, and tighten them. The desktop base is now ready to use.
Installing the vehicle kit: 1. From the front of the dock you see four hex holes. Press a nut into each hole. Use a screwdriver or similar object to press them firmly into place. 2. From the back of the dock, align the ram mount with the screw holes. 3. Insert the four screws into these holes, screw them in all the way, and tighten them.
4. Attach the arm to the two RAM mounts (one on each end). The mobile dock is now ready to use in a vehicle, on a pole, etc. Vehicle power considerations: When powering the dock from a vehicle, especially in a permanent situation, be familiar with the power setup. Power configuration options and recommendations: The Mesa suspends when battery power is being used (default setting), insuring that the both the Mesa batteries and the vehicle battery are not fully depleted.
The mobile dock is connected to a key switched battery port of the vehicle. The vehicle power is not depleted by the Mesa when the vehicle is turned off. Be aware that with this configuration the Mesa continues to power the dock ports, depleting the Mesa batteries. Wall Mount You can mount the mobile dock to a wall. Use 2 size 8 wood screws and attach the dock to a wall stud or plywood panel. Attaching the Mesa to the Mobile Dock Follow these instructions to place the Mesa into the mobile dock: 1.
Releasing the Mesa from the Mobile Dock To release the Mesa from the mobile dock, lift up on the top latch. Pull the Mesa forward and remove it. Note: Loosen the security bolt if the mobile dock is being used in a vehicle. Maintenance Environmental Issues The mobile dock sheds water when used in its normal configuration, but is not sealed against water. Avoid using the dock in situations where water can enter the connector ports.
Mesa Travel Charger The Mesa Travel Charger is an optional accessory that allows you to charge Mesa battery packs on the go. One or two battery packs can be charged at once. How to Use the Travel Charger 1. Battery pack(s) should be charged at room temperature (68° F or 20° C) 2. Place the travel charger on a flat surface where it will be undisturbed. 3. The following accessories can be used to provide power to the travel charger: a. AC wall power charger provided with the Mesa; b.
LED State Indicates Red LED On Battery pack charging Green LED On Battery pack fully charged Red Flashing LED Battery pack or charging fault Battery Pack or Charging Faults and Remedies Possible causes for a flashing red LED: Over-discharged battery: The battery pack is severely depleted. The red LED flashes a few seconds after the battery is inserted. If the red LED continues to flash for a couple of minutes, remove the battery pack. It might be faulty, requiring replacement.
Index
Index Symbols 3G Data Modem 33, 64 Compliance and Regulatory Information 68 Connection Problems 66 Install SIM Card 33, 64 Maintenance of Your Modem 68 RF Interference Issues 63, 66 Set up Data Account with Wireless Provider 33, 64 Set up the Cell Modem 63, 66 A ActiveSync Creating a Connection 38 Anatomy of the Mesa 6 Audio Features 15, 28 Audio Jack 28 Microphone 15, 28 Speaker 15, 28 B Backlight 19 Battery Pack 7, 10, 12, 14, 24, 25, 26, 27, 32, 65, 72, 85, 92, 106 Bluetooth Wireless Communication 42 C
C Camera 7, 21, 53, 56, 59, 88 Videos 60, 88 Care and Maintenance Cleaning 73 Storage 72 Less Than Two Months 72 More Than Two Months 72 Cautions 11, 24, 26, 36, 37, 65, 67, 73, 74, 81, 94 Cell Modem 63, 66 Certifications and Standards 93 Cleaning the Mesa 71, 73, 74 Communicating With a Desktop Computer 29, 37 ActiveSync 38 Windows Mobile Device Center 38 Connector Module 8, 15, 27, 73 Connector Protector 27, 103 D Dashboard Gadgets 32 Data Modem.
G Geo Model 54 Camera 7, 21, 53, 56, 59, 88 Geotagging 60, 88 Videos 60, 88 Geotagging 60, 88 Getting Started Screen 29, 38 GPS 6, 32, 33, 42, 46, 53, 54, 55, 56, 57, 58, 60, 61, 82, 88, 95.
M Microphone 6, 27, 28, 86 Mobile Dock 7, 89, 97, 98, 99, 100, 102, 103, 104 Communication Options 98 Mobile Mounting 100 Mounting Options Desktop Base 98 Vehicle Kit 98 Mounting Options 99 N Navigating Around the Mesa Touch Gestures 15, 16 Navigation, GPS 57 O Online Help 29, 38 P Power Input Jack 27, 98 Power Management Battery Life 24 Battery Status 25, 32 Charging Battery Packs 24 Charging Errors 26 Power Settings 24 Power Off 30, 34 Product Warnings 91, 92, 93, 95 R Reassign Button Functions.
S Screen Protector 9 SD Cards 26 SDK 40 Speaker 6, 27, 28, 86 Specifications 82, 83, 84, 85, 86, 87, 89 Storing the Mesa and Battery Pack 72 Suspend 30, 34 System Information 64, 81, 82 T Temperatures Charging Battery Pack.
W Warnings 92, 93 Warranty 78 Exclusions 78 Extended Warranties 80 Liability 77, 78, 79, 80, 81 Limited Product Warranty 77, 78, 79, 80, 81 Remedy 79 Repairs 80 Services 80 Warranty Exclusions 77, 78, 79, 80, 81 Warranty Repairs 80 Wi-Fi Wireless Communication 49, 50, 51 Connecting to a Wi-Fi Network 49, 50, 51, 54 Managing Connections 51 Status Icons 50 Wi-Fi Dialog Box 52 Wi-Fi Settings 52 Windows Mobile Device Center 38 Windows Start Menu 15, 17 Index 111
Mesa Rugged Notepad Owner’s Manual