Report No : BWS-03-EF-0034 FCC ID : P9BPSD302 Date of Test : July 13, 2003 Appendix 6. User Manual Refer to the following pages JUNGSOFT Co., Ltd.
NEXDISK USB 2.
1. 2. 3. 4. Write Protect Switch : To prevent NEXDISK to write, switch to Ï Portable Neck Strap: NEXDISK Portable Neck Strap hook. Pocket Clip: To securely clip to pocket or backpack, etc. CAP: To protect USB connection head. 5. LED Indicator: (1) Green LED: Lit when NEXDISK is connected to PC (2) Red LED: Lit when NEXDISK is in activity. Product Feature n USB 2.0 Support NEXDISK USB 2.0 is incredibly speedy and light portable storage device based on Hi-Speed USB Interface (USB 2.0). USB 2.
Product Specification Model Capacity PSD302 8/16/32/64/128/256/512/1024 MB Hi-Speed USB (USB spec 2.0), Full-Speed USB (USB spec. 1.1) Transfer Rate Write: 3 MB/Sec, Read: 8 MB/Sec 86 * 20 * 10 mm (Cap Included) Size 76 * 20 * 10 mm (Cap Excluded) 18 g Weight Interface Power USB bus Power MS-DOS, Windows98SE/Me/2000/XP, O . S S u p p o r t Higher than Mac 9.0, Higher than Linux2.4.0, Higher than Win CE3.0 USB 2.0 supporting PC such as Desktop PC, Notebook A p p l i c a t i o n PC, PDA ⋯etc.
Program Use Password Format Setting Security Area Authentication < NEXDISK USB 2.0 Utility > - Connect NEXDISK USB 2.0 to USB Port. - NEXDISK USB 2.0 Utility Program will realize Product and run automatically. (Above images will be appeared on the screen.) 1. Partitioning and Password Setting - User can regulate Disk size for Security Area or Public Area in NEXDISK USB 2.0 - User can designate User Password of the partition in NEXDISK USB 2.0. - NEXDISK USB 2.0 is supporting the mode as below.
Caution: Be careful to lose the password after designating! . Public Area + Security Area (Dual Drive) Public Area + Security Area (Single Drive) E. Once click “OK” button, the partition designate format will be started with the progress bar as above. Caution: Please move the data in NEXDISK USB 2.0 to Hard disk before using partitioning function. Then do the below work. F. When NEXDISK USB 2.0 device partition is successfully done, the below image is popped up.
Caution: User should check USB Booting Mode that the main board is supporting. B. USB-ZIP and USB-HDD Option are activated or inactivated differently on each Windows OS. Please refer to the below chart. Windows9x System Windows ME Windows2000 system Windows XP USB-ZIP Activate Activate Inactivate Activate USB-HDD Activate Activate Inactivate Inactivate C. Once click “OK” button. NEXDISK USB 2.0 is formatted by the mode chosen and the files for USB Booting are copied in NEXDISK USB 2.0 Device.
NOTICES TO USER This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC WARNING This equipment generates or uses radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual.