MUZIO (JM-200) USER MANUAL
MUZIO 2(JM-200) Specs Category Range of Freguency Audio Earphone Output Signal to Noise Ratio Frequency Range FM Radio Output Signal to Noise Ratio MUZIO Specs 20Hz ~ 20KHz Earphone 1 : (L)12mW + (R)12mW(16Ohm), Volume Max Earphone 2 : (L)8mW + (R)8mW(16Ohm), Volume Max 90dB 76.0MHz ~ 108.0MHz Earphone 1 : (L)12mW + (R)12mW(16Ohm), Volume Max Earphone 2 : (L)8mW + (R)8mW(16Ohm), Volume Max 50dB Removable USB Device USB1.1 Disk USB HOST USB1.1 File Format MPEG 1/2/2.
Power On & Off 1. Press ►/■ button and hold for Power On or Off. Charging 1. Connect MUZIO into USB Port through USB cable provided or connect into the power terminal of charger sold separately. When the power is full, Red LED on MUZIO will be off.
REC 8.EQ Change : Short Click after Long Click ☼ 9.Folder Change : Short Push ∧ or ∨ 10.Avata Display on/off : Long Push FM mode operation 1.FM Mode: At the Power on, select Radio Mode after long press of Mode Button. ►/■ 2.STEREO/MONO Change: Short Click AB 3.Frequency/Preset Change: Short Click <> 4.Previous or Next Channel Search: Long Push at Frequency mode REC 5.Auto Scan: Long Click Voice/Line-in Recording 1.
3. To return to the main menu, push the control in the << direction. 4.To escape the menu setting, select the exit menu and press it. Folder Search Function A user finds and listens to music in a desired folder when listening to music in each folder. 1. At the play mode, Press the center of the control. 2. Use the <<, >>, ∧, ∨ direction to move to the desired folder. 3. To play, press the center of the control and select the desired file.
USB Host mode operation 1. At the menu setting, select System -> Host/Device -> Host. 2. Connect MUZIO into the external USB Device through mini USB Adapter provided. 3. Pause Play. 4. Select the target file in the external USB device through Folder search function. 5. Press ‘REC’ button, then select ‘Copy’. 6. Select the destination of copy at the folder search function, then select ‘Paste’ after pressing ‘REC’ button.
FCC Compliance Statements NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates ,uses and can radiate radio frequency energy and ,if not installed and used in accordance with the instruction , may cause harmful interference to radio communication.
