User's Manual

JM-39R USER MANUAL
Installation:
NOTE: The pictures show in the User’s manual are for demonstration purposes only. Your
computer may look slightly different.
1. Remove the battery compartment cover located on the bottom of your mouse.
2. Install two AAA batteries into your mouse following the battery orientation guide in the
battery bay, and then replace the cover back onto your mouse.
3. Turn on your computer and wait for it to load.
4. Plug the Wireless USB Receiver into an available USB port on your computer .Your mouse
will establish a connection with the receiver and is ready to be used. If a connection is not
established , there might be a high level of surrounding interference, press the Connect button
on the back of the Receiver , and press the Connect button on the back of your mouse.
5. Your computer will detect your mouse and the necessary drivers will be installed
automatically.
6. Your mouse is now ready to be used.
FCC Caution:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Notes:
The manufacturer is not responsible for and radio or TV interference caused by unauthorized modifications
to this equipment. Such modifications could void the user's authority to operate the equipment.