User's Manual

JM-32R USER MANUAL
Installation:
NOTE: The pictures show in the User’s manual are for demonstration purposes only. Your computer may
look slightly different.
1. Press the battery compartment cover button and slide the conver off your mouse.
2. Install two AA batteries into your mouse following the battery orientation guide in the battery bay, and
then slide the cover back onto your mouse until it securely locks.
3. Turn on your computer and wait for it to load.
4. Plug the Wireless USB Receiver into an available USB port on your computer .Your mouse will
establish a connection with the receiver and is ready to be used. If a connection is not established ,
there might be a high level of surrounding interference, press the Connect button on the back of the
Receiver , and press the Connect button on the back of your mouse.
5. Your computer will detect your mouse and the necessary drivers will be installed automatically.
6. Your mouse is now ready to be used.
FCC Caution:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC Notes:
The manufacturer is not responsible for and radio or TV interference caused by unauthorized modifications to this
equipment. Such modifications could void the user's authority to operate the equipment.